- 27 Sep, 2013 23 commits
-
-
Stefan Kriwanek authored
commit 06bb5219 upstream. Some devices of the "Speedlink VAD Cezanne" model need more aggressive fixing than already done. I made sure through testing that this patch would not interfere with the proper working of a device that is bug-free. (The driver drops EV_REL events with abs(val) >= 256, which are not achievable even on the highest laser resolution hardware setting.) Signed-off-by:
Stefan Kriwanek <mail@stefankriwanek.de> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kees Cook authored
commit 412f3010 upstream. A HID device could send a malicious output report that would cause the pantherlord HID driver to write beyond the output report allocation during initialization, causing a heap overflow: [ 310.939483] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0003 ... [ 315.980774] BUG kmalloc-192 (Tainted: G W ): Redzone overwritten CVE-2013-2892 Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Felix Fietkau authored
commit a1c781bb upstream. They are not implemented, and accessing them might trigger errors Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Felix Fietkau authored
commit e96542e5 upstream. Similar to a race condition that exists in the tx path, the hardware might re-read the 'next' pointer of a descriptor of the last completed frame. This only affects non-EDMA (pre-AR93xx) devices. To deal with this race, defer clearing and re-linking a completed rx descriptor until the next one has been processed. Signed-off-by:
-
Felix Fietkau authored
commit 026d5b07 upstream. Otherwise in some cases, EAPOL frames might be filtered during the initial handshake, causing delays and assoc failures. Signed-off-by:
-
John W. Linville authored
commit 67d0cf50 upstream. The driver fails to check the results of DMA mapping in twp places, which results in the following warning: [ 28.078515] ------------[ cut here ]------------ [ 28.078529] WARNING: at lib/dma-debug.c:937 check_unmap+0x47e/0x930() [ 28.078533] bcma-pci-bridge 0000:0e:00.0: DMA-API: device driver failed to check map error[device address=0x00000000b5d60d6c] [size=1876 bytes] [mapped as single] [ 28.078536] Modules linked in: bnep bluetooth vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) ipv6 b43 brcmsmac rtl8192cu rtl8192c_common rtlwifi mac802 11 brcmutil cfg80211 snd_hda_codec_conexant rng_core snd_hda_intel kvm_amd snd_hda_codec ssb kvm mmc_core snd_pcm snd_seq snd_timer snd_seq_device snd k8temp cordic joydev serio_raw hwmon sr_mod sg pcmcia pcmcia_core soundcore cdrom i2c_nforce2 i2c_core forcedeth bcma snd_page_alloc autofs4 ext4 jbd2 mbcache crc1 6 scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh ata_generic pata_amd [ 28.078602] CPU: 1 PID: 2570 Comm: NetworkManager Tainted: G O 3.10.0-rc7-wl+ #42 [ 28.078605] Hardware name: Hewlett-Packard HP Pavilion dv2700 Notebook PC/30D6, BIOS F.27 11/27/2008 [ 28.078607] 0000000000000009 ffff8800bbb03ad8 ffffffff8144f898 ffff8800bbb03b18 [ 28.078612] ffffffff8103e1eb 0000000000000002 ffff8800b719f480 ffff8800b7b9c010 [ 28.078617] ffffffff824204c0 ffffffff81754d57 0000000000000754 ffff8800bbb03b78 [ 28.078622] Call Trace: [ 28.078624] <IRQ> [<ffffffff8144f898>] dump_stack+0x19/0x1b [ 28.078634] [<ffffffff8103e1eb>] warn_slowpath_common+0x6b/0xa0 [ 28.078638] [<ffffffff8103e2c1>] warn_slowpath_fmt+0x41/0x50 [ 28.078650] [<ffffffff8122d7ae>] check_unmap+0x47e/0x930 [ 28.078655] [<ffffffff8122de4c>] debug_dma_unmap_page+0x5c/0x70 [ 28.078679] [<ffffffffa04a808c>] dma64_getnextrxp+0x10c/0x190 [brcmsmac] [ 28.078691] [<ffffffffa04a9042>] dma_rx+0x62/0x240 [brcmsmac] [ 28.078707] [<ffffffffa0479101>] brcms_c_dpc+0x211/0x9d0 [brcmsmac] [ 28.078717] [<ffffffffa046d927>] ? brcms_dpc+0x27/0xf0 [brcmsmac] [ 28.078731] [<ffffffffa046d947>] brcms_dpc+0x47/0xf0 [brcmsmac] [ 28.078736] [<ffffffff81047dcc>] tasklet_action+0x6c/0xf0 --snip-- [ 28.078974] [<ffffffff813891bd>] SyS_sendmsg+0xd/0x20 [ 28.078979] [<ffffffff81455c24>] tracesys+0xdd/0xe2 [ 28.078982] ---[ end trace 6164d1a08148e9c8 ]--- [ 28.078984] Mapped at: [ 28.078985] [<ffffffff8122c8fd>] debug_dma_map_page+0x9d/0x150 [ 28.078989] [<ffffffffa04a9322>] dma_rxfill+0x102/0x3d0 [brcmsmac] [ 28.079001] [<ffffffffa047a13d>] brcms_c_init+0x87d/0x1100 [brcmsmac] [ 28.079010] [<ffffffffa046d851>] brcms_init+0x21/0x30 [brcmsmac] [ 28.079018] [<ffffffffa04786e0>] brcms_c_up+0x150/0x430 [brcmsmac] As the patch adds a new failure mechanism to dma_rxfill(). When I changed the comment at the start of the routine to add that information, I also polished the wording. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Brett Rudley <brudley@broadcom.com> Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: brcm80211-dev-list@broadcom.com Acked-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Takashi Iwai authored
commit 83f72151 upstream. Toshiba Satellite C870 shows interrupt problems occasionally when certain mixer controls like "Mic Switch" is toggled. This seems worked around by not using MSI. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=833585Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Mike Dyer authored
commit 85fa532b upstream. Bit 9 of PLL2,3 and 4 is reserved as '0'. The 24bit fractional part should be split across each register in 8bit chunks. Signed-off-by:
Mike Dyer <mike.dyer@md-soft.co.uk> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Tejun Heo authored
commit c34ac00c upstream. list_first_or_null() should test whether the list is empty and return pointer to the first entry if not in a RCU safe manner. It's broken in several ways. * It compares __kernel @__ptr with __rcu @__next triggering the following sparse warning. net/core/dev.c:4331:17: error: incompatible types in comparison expression (different address spaces) * It doesn't perform rcu_dereference*() and computes the entry address using container_of() directly from the __rcu pointer which is inconsitent with other rculist interface. As a result, all three in-kernel users - net/core/dev.c, macvlan, cgroup - are buggy. They dereference the pointer w/o going through read barrier. * While ->next dereference passes through list_next_rcu(), the compiler is still free to fetch ->next more than once and thus nullify the "__ptr != __next" condition check. Fix it by making list_first_or_null_rcu() dereference ->next directly using ACCESS_ONCE() and then use list_entry_rcu() on it like other rculist accessors. v2: Paul pointed out that the compiler may fetch the pointer more than once nullifying the condition check. ACCESS_ONCE() added on ->next dereference. v3: Restored () around macro param which was accidentally removed. Spotted by Paul. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Li Zefan <lizefan@huawei.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Hans de Goede authored
commit b4f17a48 upstream. While reading the config parsing code I noticed this check is missing, without this check config->desc.wTotalLength can end up with a value larger then the dev->rawdescriptors length for the config, and when userspace then tries to get the rawdescriptors bad things may happen. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Oliver Neukum authored
commit 6dd433e6 upstream. Both could want to submit the same URB. Some checks of the flag intended to prevent that were missing. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Daniel Mack authored
commit f375fc52 upstream. Commit 7e8d5cd9 ("USB: Add EHCI support for MX27 and MX31 based boards") introduced code that could potentially lead to a NULL pointer dereference on driver removal. Fix this by checking for the value of pdata before dereferencing it. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Johan Hovold authored
commit 3b716caf upstream. Fix endianess bugs in parallel-port code which caused corrupt control-requests to be issued on big-endian machines. Reported-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit d0bd9a41 upstream. The write_parport_reg_nonblock() function shouldn't sleep because it's called with spinlocks held. Signed-off-by:
-
Dan Carpenter authored
commit 2c4283ca upstream. In dt282x_ai_insn_read() we call this macro like: wait_for(!mux_busy(), comedi_error(dev, "timeout\n"); return -ETIME;); Because the if statement doesn't have curly braces it means we always return -ETIME and the function never succeeds. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Jeff Layton authored
commit 73e216a8 upstream. Oleksii reported that he had seen an oops similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ipt_MASQUERADE xt_REDIRECT xt_tcpudp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables carl9170 ath usb_storage f2fs nfnetlink_log nfnetlink md4 cifs dns_resolver hid_generic usbhid hid af_packet uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev rfcomm btusb bnep bluetooth qmi_wwan qcserial cdc_wdm usb_wwan usbnet usbserial mii snd_hda_codec_hdmi snd_hda_codec_realtek iwldvm mac80211 coretemp intel_powerclamp kvm_intel kvm iwlwifi snd_hda_intel cfg80211 snd_hda_codec xhci_hcd e1000e ehci_pci snd_hwdep sdhci_pci snd_pcm ehci_hcd microcode psmouse sdhci thinkpad_acpi mmc_core i2c_i801 pcspkr usbcore hwmon snd_timer snd_page_alloc snd ptp rfkill pps_core soundcore evdev usb_common vboxnetflt(O) vboxdrv(O)Oops#2 Part8 loop tun binfmt_misc fuse msr acpi_call(O) ipv6 autofs4 CPU: 0 PID: 21612 Comm: kworker/0:1 Tainted: G W O 3.10.1SIGN #28 Hardware name: LENOVO 2306CTO/2306CTO, BIOS G2ET92WW (2.52 ) 02/22/2013 Workqueue: cifsiod cifs_echo_request [cifs] task: ffff8801e1f416f0 ti: ffff880148744000 task.ti: ffff880148744000 RIP: 0010:[<ffffffff814dcc13>] [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP: 0000:ffff880148745b00 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880148745b78 RCX: 0000000000000048 RDX: ffff880148745c90 RSI: ffff880181864a00 RDI: ffff880148745b78 RBP: ffff880148745c48 R08: 0000000000000048 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880181864a00 R13: ffff880148745c90 R14: 0000000000000048 R15: 0000000000000048 FS: 0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000088 CR3: 000000020c42c000 CR4: 00000000001407b0 Oops#2 Part7 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880148745b30 ffffffff810c4af9 0000004848745b30 ffff880181864a00 ffffffff81ffbc40 0000000000000000 ffff880148745c90 ffffffff810a5aab ffff880148745bc0 ffffffff81ffbc40 ffff880148745b60 ffffffff815a9fb8 Call Trace: [<ffffffff810c4af9>] ? finish_task_switch+0x49/0xe0 [<ffffffff810a5aab>] ? lock_timer_base.isra.36+0x2b/0x50 [<ffffffff815a9fb8>] ? _raw_spin_unlock_irqrestore+0x18/0x40 [<ffffffff810a673f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff815aa38f>] ? _raw_spin_unlock_bh+0x1f/0x30 [<ffffffff814dcc87>] kernel_sendmsg+0x37/0x50 [<ffffffffa081a0e0>] smb_send_kvec+0xd0/0x1d0 [cifs] [<ffffffffa081a263>] smb_send_rqst+0x83/0x1f0 [cifs] [<ffffffffa081ab6c>] cifs_call_async+0xec/0x1b0 [cifs] [<ffffffffa08245e0>] ? free_rsp_buf+0x40/0x40 [cifs] Oops#2 Part6 [<ffffffffa082606e>] SMB2_echo+0x8e/0xb0 [cifs] [<ffffffffa0808789>] cifs_echo_request+0x79/0xa0 [cifs] [<ffffffff810b45b3>] process_one_work+0x173/0x4a0 [<ffffffff810b52a1>] worker_thread+0x121/0x3a0 [<ffffffff810b5180>] ? manage_workers.isra.27+0x2b0/0x2b0 [<ffffffff810bae00>] kthread+0xc0/0xd0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 [<ffffffff815b199c>] ret_from_fork+0x7c/0xb0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 Code: 84 24 b8 00 00 00 4c 89 f1 4c 89 ea 4c 89 e6 48 89 df 4c 89 60 18 48 c7 40 28 00 00 00 00 4c 89 68 30 44 89 70 14 49 8b 44 24 28 <ff> 90 88 00 00 00 3d ef fd ff ff 74 10 48 8d 65 e0 5b 41 5c 41 RIP [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP <ffff880148745b00> CR2: 0000000000000088 The client was in the middle of trying to send a frame when the server->ssocket pointer got zeroed out. In most places, that we access that pointer, the srv_mutex is held. There's only one spot that I see that the server->ssocket pointer gets set and the srv_mutex isn't held. This patch corrects that. The upstream bug report was here: https://bugzilla.kernel.org/show_bug.cgi?id=60557Reported-by:
Oleksii Shevchuk <alxchk@gmail.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Shawn Nematbakhsh authored
commit c8476fb8 upstream. If a USB controller with XHCI_RESET_ON_RESUME goes to runtime suspend, a reset will be performed upon runtime resume. Any previously suspended devices attached to the controller will be re-enumerated at this time. This will cause problems, for example, if an open system call on the device triggered the resume (the open call will fail). Note that this change is only relevant when persist_enabled is not set for USB devices. This patch should be backported to kernels as old as 3.0, that contain the commit c877b3b2 "xhci: Add reset on resume quirk for asrock p67 host". Signed-off-by:
Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Sarah Sharp authored
commit 52fb6125 upstream. The xHCI platform driver calls into usb_add_hcd to register the irq for its platform device. It does not want the xHCI generic driver to register an interrupt for it at all. The original code did that by setting the XHCI_BROKEN_MSI quirk, which tells the xHCI driver to not enable MSI or MSI-X for a PCI host. Unfortunately, if CONFIG_PCI is enabled, and CONFIG_USB_DW3 is enabled, the xHCI generic driver will attempt to register a legacy PCI interrupt for the xHCI platform device in xhci_try_enable_msi(). This will result in a bogus irq being registered, since the underlying device is a platform_device, not a pci_device, and thus the pci_device->irq pointer will be bogus. Add a new quirk, XHCI_PLAT, so that the xHCI generic driver can distinguish between a PCI device that can't handle MSI or MSI-X, and a platform device that should not have its interrupts touched at all. This quirk may be useful in the future, in case other corner cases like this arise. This patch should be backported to kernels as old as 3.9, that contain the commit 00eed9c8 "USB: xhci: correctly enable interrupts". Signed-off-by:
Yu Y Wang <yu.y.wang@intel.com> Tested-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Peter Maydell authored
commit 99f2b130 upstream. The SMAP register offsets in the versatile PCI controller code were all off by four. (This didn't have any observable bad effects because on this board PHYS_OFFSET is zero, and (a) writing zero to the flags register at offset 0x10 has no effect and (b) the reset value of the SMAP register is zero anyway, so failing to write SMAP2 didn't matter.) Signed-off-by:
Peter Maydell <peter.maydell@linaro.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Roger Pau Monne authored
commit 5f338d90 upstream. With the current implementation, the callback in the tail of the list can be added twice, because the check done in gnttab_request_free_callback is bogus, callback->next can be NULL if it is the last callback in the list. If we add the same callback twice we end up with an infinite loop, were callback == callback->next. Replace this check with a proper one that iterates over the list to see if the callback has already been added. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by:
Matt Wilson <msw@amazon.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Anton Blanchard authored
commit 230aef7a upstream. Normally when we haven't implemented an alignment handler for a load or store instruction the process will be terminated. The alignment handler uses the DSISR (or a pseudo one) to locate the right handler. Unfortunately ldbrx and stdbrx overlap lfs and stfs so we incorrectly think ldbrx is an lfs and stdbrx is an stfs. This bug is particularly nasty - instead of terminating the process we apply an incorrect fixup and continue on. With more and more overlapping instructions we should stop creating a pseudo DSISR and index using the instruction directly, but for now add a special case to catch ldbrx/stdbrx. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Herbert Xu authored
commit 77dbd7a9 upstream. crypto_larval_lookup should only return a larval if it created one. Any larval created by another entity must be processed through crypto_larval_wait before being returned. Otherwise this will lead to a larval being killed twice, which will most likely lead to a crash. Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Alan Stern authored
commit 984f1733 upstream. This patch fixes an out-of-bounds error in sd_read_cache_type(), found by Google's AddressSanitizer tool. When the loop ends, we know that "offset" lies beyond the end of the data in the buffer, so no Caching mode page was found. In theory it may be present, but the buffer size is limited to 512 bytes. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
- 14 Sep, 2013 17 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 5b5b3058, which was commit 660696d1 upstream. Paul Gortmaker <paul.gortmaker@windriver.com> writes: [this patch] introduces the following: arch/x86/kvm/emulate.c: In function ‘decode_operand’: arch/x86/kvm/emulate.c:3974:4: warning: passing argument 1 of ‘decode_register’ makes integer from pointer +without a cast [enabled by default] arch/x86/kvm/emulate.c:789:14: note: expected ‘u8’ but argument is of type ‘struct x86_emulate_ctxt *’ arch/x86/kvm/emulate.c:3974:4: warning: passing argument 2 of ‘decode_register’ makes pointer from integer +without a cast [enabled by default] arch/x86/kvm/emulate.c:789:14: note: expected ‘long unsigned int *’ but argument is of type ‘u8’ Based on the severity of the warnings above, I'm reasonably sure there will be some kind of runtime regressions due to this, but I stopped to investigate the warnings as soon as I saw them, before any run time testing. It happens because mainline v3.7-rc1~113^2~40 (dd856efa) does this: -static void *decode_register(u8 modrm_reg, unsigned long *regs, +static void *decode_register(struct x86_emulate_ctxt *ctxt, u8 modrm_reg, Since 660696d1 was only applied to stable 3.4, 3.8, and 3.9 -- and the prerequisite above is in 3.7+, the issue should be limited to 3.4.44+ Reported-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 9a75c6e5 upstream. Fix the m32r compile error: arch/m32r/boot/compressed/misc.c:31:14: error: static declaration of 'memset' follows non-static declaration make[5]: *** [arch/m32r/boot/compressed/misc.o] Error 1 make[4]: *** [arch/m32r/boot/compressed/vmlinux] Error 2 by removing the static keyword. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Geert Uytterhoeven authored
commit a8abbca6 upstream. Fix the m32r link error: LD arch/m32r/boot/compressed/vmlinux arch/m32r/boot/compressed/misc.o: In function `zlib_updatewindow': misc.c:(.text+0x190): undefined reference to `memcpy' misc.c:(.text+0x190): relocation truncated to fit: R_M32R_26_PLTREL against undefined symbol `memcpy' make[5]: *** [arch/m32r/boot/compressed/vmlinux] Error 1 by adding our own implementation of memcpy(). Signed-off-by:
-
Geert Uytterhoeven authored
commit df12aef6 upstream. Commit a556bec9 ("m32r: fix arch/m32r/boot/compressed/Makefile") changed "$(suffix_y)" to "$(suffix-y)", but didn't update any location where "suffix_y" is set, causing: make[5]: *** No rule to make target `arch/m32r/boot/compressed/vmlinux.bin.', needed by `arch/m32r/boot/compressed/piggy.o'. Stop. make[4]: *** [arch/m32r/boot/compressed/vmlinux] Error 2 make[3]: *** [zImage] Error 2 Correct the other locations to fix this. Signed-off-by:
-
Ying Xue authored
[ Upstream commit 4225a398 ] When the lockdep validator is enabled, it will report the below warning when we enable a TIPC bearer: [ INFO: possible irq lock inversion dependency detected ] --------------------------------------------------------- Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(ptype_lock); local_irq_disable(); lock(tipc_net_lock); lock(ptype_lock); <Interrupt> lock(tipc_net_lock); *** DEADLOCK *** the shortest dependencies between 2nd lock and 1st lock: -> (ptype_lock){+.+...} ops: 10 { [...] SOFTIRQ-ON-W at: [<c1089418>] __lock_acquire+0x528/0x13e0 [<c108a360>] lock_acquire+0x90/0x100 [<c1553c38>] _raw_spin_lock+0x38/0x50 [<c14651ca>] dev_add_pack+0x3a/0x60 [<c182da75>] arp_init+0x1a/0x48 [<c182dce5>] inet_init+0x181/0x27e [<c1001114>] do_one_initcall+0x34/0x170 [<c17f7329>] kernel_init+0x110/0x1b2 [<c155b6a2>] kernel_thread_helper+0x6/0x10 [...] ... key at: [<c17e4b10>] ptype_lock+0x10/0x20 ... acquired at: [<c108a360>] lock_acquire+0x90/0x100 [<c1553c38>] _raw_spin_lock+0x38/0x50 [<c14651ca>] dev_add_pack+0x3a/0x60 [<c8bc18d2>] enable_bearer+0xf2/0x140 [tipc] [<c8bb283a>] tipc_enable_bearer+0x1ba/0x450 [tipc] [<c8bb3a04>] tipc_cfg_do_cmd+0x5c4/0x830 [tipc] [<c8bbc032>] handle_cmd+0x42/0xd0 [tipc] [<c148e802>] genl_rcv_msg+0x232/0x280 [<c148d3f6>] netlink_rcv_skb+0x86/0xb0 [<c148e5bc>] genl_rcv+0x1c/0x30 [<c148d144>] netlink_unicast+0x174/0x1f0 [<c148ddab>] netlink_sendmsg+0x1eb/0x2d0 [<c1456bc1>] sock_aio_write+0x161/0x170 [<c1135a7c>] do_sync_write+0xac/0xf0 [<c11360f6>] vfs_write+0x156/0x170 [<c11361e2>] sys_write+0x42/0x70 [<c155b0df>] sysenter_do_call+0x12/0x38 [...] } -> (tipc_net_lock){+..-..} ops: 4 { [...] IN-SOFTIRQ-R at: [<c108953a>] __lock_acquire+0x64a/0x13e0 [<c108a360>] lock_acquire+0x90/0x100 [<c15541cd>] _raw_read_lock_bh+0x3d/0x50 [<c8bb874d>] tipc_recv_msg+0x1d/0x830 [tipc] [<c8bc195f>] recv_msg+0x3f/0x50 [tipc] [<c146a5fa>] __netif_receive_skb+0x22a/0x590 [<c146ab0b>] netif_receive_skb+0x2b/0xf0 [<c13c43d2>] pcnet32_poll+0x292/0x780 [<c146b00a>] net_rx_action+0xfa/0x1e0 [<c103a4be>] __do_softirq+0xae/0x1e0 [...] } >From the log, we can see three different call chains between CPU0 and CPU1: Time 0 on CPU0: kernel_init()->inet_init()->dev_add_pack() At time 0, the ptype_lock is held by CPU0 in dev_add_pack(); Time 1 on CPU1: tipc_enable_bearer()->enable_bearer()->dev_add_pack() At time 1, tipc_enable_bearer() first holds tipc_net_lock, and then wants to take ptype_lock to register TIPC protocol handler into the networking stack. But the ptype_lock has been taken by dev_add_pack() on CPU0, so at this time the dev_add_pack() running on CPU1 has to be busy looping. Time 2 on CPU0: netif_receive_skb()->recv_msg()->tipc_recv_msg() At time 2, an incoming TIPC packet arrives at CPU0, hence tipc_recv_msg() will be invoked. In tipc_recv_msg(), it first wants to hold tipc_net_lock. At the moment, below scenario happens: On CPU0, below is our sequence of taking locks: lock(ptype_lock)->lock(tipc_net_lock) On CPU1, our sequence of taking locks looks like: lock(tipc_net_lock)->lock(ptype_lock) Obviously deadlock may happen in this case. But please note the deadlock possibly doesn't occur at all when the first TIPC bearer is enabled. Before enable_bearer() -- running on CPU1 does not hold ptype_lock, so the TIPC receive handler (i.e. recv_msg()) is not registered successfully via dev_add_pack(), so the tipc_recv_msg() cannot be called by recv_msg() even if a TIPC message comes to CPU0. But when the second TIPC bearer is registered, the deadlock can perhaps really happen. To fix it, we will push the work of registering TIPC protocol handler into workqueue context. After the change, both paths taking ptype_lock are always in process contexts, thus, the deadlock should never occur. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jason Wang authored
commit ece793fc upstream. We try to linearize part of the skb when the number of iov is greater than MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest network. Solve this problem by calculate the pages needed for iov before trying to do zerocopy and switch to use copy instead of zerocopy if it needs more than MAX_SKB_FRAGS. This is done through introducing a new helper to count the pages for iov, and call uarg->callback() manually when switching from zerocopy to copy to notify vhost. We can do further optimization on top. This bug were introduced from b92946e2 (macvtap: zerocopy: validate vectors before building skb). Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Jason Wang authored
commit c70aa540 upstream. We add used and signal guest in worker thread but did not poll the virtqueue during the zero copy callback. This may lead the missing of adding and signalling during zerocopy. Solve this by polling the virtqueue and let it wakeup the worker during callback. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 3a1c7565 ] In tcp_v6_do_rcv() code, when processing pkt options, we soley work on our skb clone opt_skb that we've created earlier before entering tcp_rcv_established() on our way. However, only in condition ... if (np->rxopt.bits.rxtclass) np->rcv_tclass = ipv6_get_dsfield(ipv6_hdr(skb)); ... we work on skb itself. As we extract every other information out of opt_skb in ipv6_pktoptions path, this seems wrong, since skb can already be released by tcp_rcv_established() earlier on. When we try to access it in ipv6_hdr(), we will dereference freed skb. [ Bug added by commit 4c507d28 ("net: implement IP_RECVTOS for IP_PKTOPTIONS") ] Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Jiri Bohac authored
[ Upstream commit 61e76b17 ] RFC 4443 has defined two additional codes for ICMPv6 type 1 (destination unreachable) messages: 5 - Source address failed ingress/egress policy 6 - Reject route to destination Now they are treated as protocol error and icmpv6_err_convert() converts them to EPROTO. RFC 4443 says: "Codes 5 and 6 are more informative subsets of code 1." Treat codes 5 and 6 as code 1 (EACCES) Btw, connect() returning -EPROTO confuses firefox, so that fallback to other/IPv4 addresses does not work: https://bugzilla.mozilla.org/show_bug.cgi?id=910773Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 2d98c29b ] While looking into MLDv1/v2 code, I noticed that bridging code does not convert it's max delay into jiffies for MLDv2 messages as we do in core IPv6' multicast code. RFC3810, 5.1.3. Maximum Response Code says: The Maximum Response Code field specifies the maximum time allowed before sending a responding Report. The actual time allowed, called the Maximum Response Delay, is represented in units of milliseconds, and is derived from the Maximum Response Code as follows: [...] As we update timers that work with jiffies, we need to convert it. Signed-off-by:
-
Thomas Graf authored
[ Upstream commit 25a6e6b8 ] Allocating skbs when sending out neighbour discovery messages currently uses sock_alloc_send_skb() based on a per net namespace socket and thus share a socket wmem buffer space. If a netdevice is temporarily unable to transmit due to carrier loss or for other reasons, the queued up ndisc messages will cosnume all of the wmem space and will thus prevent from any more skbs to be allocated even for netdevices that are able to transmit packets. The number of neighbour discovery messages sent is very limited, use of alloc_skb() bypasses the socket wmem buffer size enforcement while the manual call to skb_set_owner_w() maintains the socket reference needed for the IPv6 output path. This patch has orginally been posted by Eric Dumazet in a modified form. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Fabio Estevam <festevam@gmail.com> Tested-by:
Fabio Estevam <fabio.estevam@freescale.com> Tested-by:
Stephen Warren <swarren@nvidia.com> Acked-by:
-
Hannes Frederic Sowa authored
[ Upstream commit f46078cf ] It is not allowed for an ipv6 packet to contain multiple fragmentation headers. So discard packets which were already reassembled by fragmentation logic and send back a parameter problem icmp. The updates for RFC 6980 will come in later, I have to do a bit more research here. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 4b08a8f1 ] Because of the max_addresses check attackers were able to disable privacy extensions on an interface by creating enough autoconfigured addresses: <http://seclists.org/oss-sec/2012/q4/292> But the check is not actually needed: max_addresses protects the kernel to install too many ipv6 addresses on an interface and guards addrconf_prefix_rcv to install further addresses as soon as this limit is reached. We only generate temporary addresses in direct response of a new address showing up. As soon as we filled up the maximum number of addresses of an interface, we stop installing more addresses and thus also stop generating more temp addresses. Even if the attacker tries to generate a lot of temporary addresses by announcing a prefix and removing it again (lifetime == 0) we won't install more temp addresses, because the temporary addresses do count to the maximum number of addresses, thus we would stop installing new autoconfigured addresses when the limit is reached. This patch fixes CVE-2013-0343 (but other layer-2 attacks are still possible). Thanks to Ding Tianhong to bring this topic up again. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 15718ea0 ] The recent fix d9bf5f13 "tun: compare with 0 instead of total_len" is not totally correct. Because "len" and "sizeof()" are size_t type, that means they are never less than zero. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Dave Jones authored
[ Upstream commit d06f5187 ] Introduced in cf3c4c03 ("8139cp: Add dma_mapping_error checking") Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 3e3be275 ] In case a subtree did not match we currently stop backtracking and return NULL (root table from fib_lookup). This could yield in invalid routing table lookups when using subtrees. Instead continue to backtrack until a valid subtree or node is found and return this match. Also remove unneeded NULL check. Reported-by:
Teco Boot <teco@inf-net.nl> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Lamparter <equinox@diac24.net> Cc: <boutier@pps.univ-paris-diderot.fr> Signed-off-by:
-
