Ignore the reported battery level of the built-in touchscreen to suppress
battery warnings when a stylus is used. The device ID was added and the
battery ignore quirk was enabled.
Signed-off-by: weiliang1503 <weiliang1503@gmail.com>
Link: https://lore.kernel.org/r/20230330115638.16146-1-weiliang1503@gmail.comSigned-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

"Digitizer" is a generic usage that may be used by various devices but
which is particularly used by non-display pen tablets. This patch adds the
usage to the list of values matched by the IS_INPUT_APPLICATION() macro
that determines if an input device should be allocated or not.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Link: https://lore.kernel.org/r/20221019151832.44522-1-jason.gerecke@wacom.comSigned-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Our HID device need KEY_CAMERA_FOCUS event to control camera,
but this event is non-existent in current HID driver.
So we add this event in hid-input.c.
Signed-off-by: fengqi <fengqi@xiaomi.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID fixes from Benjamin Tissoires:

 - fix potential out of bound write of zeroes in HID core with a
   specially crafted uhid device (Lee Jones)

 - fix potential use-after-free in work function in intel-ish-hid (Reka
   Norman)

 - selftests config fixes (Benjamin Tissoires)

 - few device small fixes and support

* tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
  HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse
  HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
  selftest: hid: fix hid_bpf not set in config
  HID: uhid: Over-ride the default maximum data buffer value with our own
  HID: core: Provide new max_buffer_size attribute to over-ride the default

Pull m68k fixes from Geert Uytterhoeven:

 - Fix systems with memory at end of 32-bit address space

 - Fix initrd on systems where memory does not start at address zero

 - Fix 68030 handling of bus errors for addresses in exception tables

* tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Only force 030 bus error if PC not in exception table
  m68k: mm: Move initrd phys_to_virt handling after paging_init()
  m68k: mm: Fix systems with memory at end of 32-bit address space

We fetch %SR value from sigframe; it might have been modified by signal
handler, so we can't trust it with any bits that are not modifiable in
user mode.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull udf fixes from Jan Kara:
 "Fix bugs in UDF caused by the big pile of changes that went in during
  the merge window"

* tag 'fs_for_v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Warn if block mapping is done for in-ICB files
  udf: Fix reading of in-ICB files
  udf: Fix lost writes in udf_adinicb_writepage()

Merge tag 'platform-drivers-x86-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "A small set of assorted bug and build/warning fixes"

* tag 'platform-drivers-x86-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform: mellanox: mlx-platform: Initialize shift variable to 0
  platform/x86: int3472: Add GPIOs to Surface Go 3 Board data
  platform/x86: ISST: Fix kernel documentation warnings
  platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it
  platform: mellanox: select REGMAP instead of depending on it
  platform/x86/intel/tpmi: Fix double free reported by Smatch
  platform/x86: ISST: Increase range of valid mail box commands
  platform/x86: dell-ddv: Fix temperature scaling
  platform/x86: dell-ddv: Fix cache invalidation on resume
  platform/x86/amd: pmc: remove CONFIG_SUSPEND checks

The implementation of 'current' on x86 is very intentionally special: it
is a very common thing to look up, and it uses 'this_cpu_read_stable()'
to get the current thread pointer efficiently from per-cpu storage.

And the keyword in there is 'stable': the current thread pointer never
changes as far as a single thread is concerned.  Even if when a thread
is preempted, or moved to another CPU, or even across an explicit call
'schedule()' that thread will still have the same value for 'current'.

It is, after all, the kernel base pointer to thread-local storage.
That's why it's stable to begin with, but it's also why it's important
enough that we have that special 'this_cpu_read_stable()' access for it.

So this is all done very intentionally to allow the compiler to treat
'current' as a value that never visibly changes, so that the compiler
can do CSE and combine multiple different 'current' accesses into one.

However, there is obviously one very special situation when the
currently running thread does actually change: inside the scheduler
itself.

So the scheduler code paths are special, and do not have a 'current'
thread at all.  Instead there are _two_ threads: the previous and the
next thread - typically called 'prev' and 'next' (or prev_p/next_p)
internally.

So this is all actually quite straightforward and simple, and not all
that complicated.

Except for when you then have special code that is run in scheduler
context, that code then has to be aware that 'current' isn't really a
valid thing.  Did you mean 'prev'? Did you mean 'next'?

In fact, even if then look at the code, and you use 'current' after the
new value has been assigned to the percpu variable, we have explicitly
told the compiler that 'current' is magical and always stable.  So the
compiler is quite free to use an older (or newer) value of 'current',
and the actual assignment to the percpu storage is not relevant even if
it might look that way.

Which is exactly what happened in the resctl code, that blithely used
'current' in '__resctrl_sched_in()' when it really wanted the new
process state (as implied by the name: we're scheduling 'into' that new
resctl state).  And clang would end up just using the old thread pointer
value at least in some configurations.

This could have happened with gcc too, and purely depends on random
compiler details.  Clang just seems to have been more aggressive about
moving the read of the per-cpu current_task pointer around.

The fix is trivial: just make the resctl code adhere to the scheduler
rules of using the prev/next thread pointer explicitly, instead of using
'current' in a situation where it just wasn't valid.

That same code is then also used outside of the scheduler context (when
a thread resctl state is explicitly changed), and then we will just pass
in 'current' as that pointer, of course.  There is no ambiguity in that
case.

The fix may be trivial, but noticing and figuring out what went wrong
was not.  The credit for that goes to Stephane Eranian.
Reported-by: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/lkml/20230303231133.1486085-1-eranian@google.com/
Link: https://lore.kernel.org/lkml/alpine.LFD.2.01.0908011214330.3304@localhost.localdomain/Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Stephane Eranian <eranian@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 596ff4a0 ("cpumask: re-introduce constant-sized cpumask
optimizations") changed cpumask_setall() to use "bitmap_set()" instead
of "bitmap_fill()", because bitmap_fill() would explicitly set all the
bits of a constant sized small bitmap, and that's exactly what we don't
want: we want to only set bits up to 'nr_cpu_ids', which is what
"bitmap_set()" does.

However, Yury correctly points out that while "bitmap_set()" does indeed
only set bits up to the required bitmap size, it doesn't _clear_ bits
above that size, so the upper bits would still not have well-defined
values.

Now, none of this should really matter, since any bits set past
'nr_cpu_ids' should always be ignored in the first place.  Yes, the bit
scanning functions might return them as a result, but since users should
always consider the ">= nr_cpu_ids" condition to mean "no more bits",
that shouldn't have any actual effect (see previous commit 8ca09d5f
"cpumask: fix incorrect cpumask scanning result checks").

But let's just do it right, the way the code was _intended_ to work.  We
have had enough lazy code that works but bites us in the *rse later
(again, see previous commit) that there's no reason to not just do this
properly.

It turns out that "bitmap_fill()" gets this all right for the complex
case, and really only fails for the inlined optimized case that just
fills the whole word.  And while we could just fix bitmap_fill() to use
the proper last word mask, there's two issues with that:

 - the cpumask case wants to do the _optimization_ based on "NR_CPUS is
   a small constant", but then wants to do the actual bit _fill_ based
   on "nr_cpu_ids" that isn't necessarily that same constant

 - we have lots of non-cpumask users of bitmap_fill(), and while they
   hopefully don't care, and probably would want the proper semantics
   anyway ("only set bits up to the limit"), I do not want the cpumask
   changes to impact other parts

So this ends up just doing the single-word optimization by hand in the
cpumask code.  If our cpumask is fundamentally limited to a single word,
just do the proper "fill in that word" exactly.  And if it's the more
complex multi-word case, then the generic bitmap_fill() will DTRT.

This is all an example of how our bitmap function optimizations really
are somewhat broken.  They conflate the "this is size of the bitmap"
optimizations with the actual bit(s) we want to set.

In many cases we really want to have the two be separate things:
sometimes we base our optimizations on the size of the whole bitmap ("I
know this whole bitmap fits in a single word, so I'll just use
single-word accesses"), and sometimes we base them on the bit we are
looking at ("this is just acting on bits that are in the first word, so
I'll use single-word accesses").

Notice how the end result of the two optimizations are the same, but the
way we get to them are quite different.

And all our cpumask optimization games are really about that fundamental
distinction, and we'd often really want to pass in both the "this is the
bit I'm working on" (which _can_ be a small constant but might be
variable), and "I know it's in this range even if it's variable" (based
on CONFIG_NR_CPUS).

So this cpumask_setall() implementation just makes that explicit.  It
checks the "I statically know the size is small" using the known static
size of the cpumask (which is what that 'small_cpumask_bits' is all
about), but then sets the actual bits using the exact number of cpus we
have (ie 'nr_cpumask_bits')

Of course, in a perfect world, the compiler would have done all the
range analysis (possibly with help from us just telling it that
"this value is always in this range"), and would do all of this for us.
But that is not the world we live in.

While we dream of that perfect world, this does that manual logic to
make it all work out.  And this was a very long explanation for a small
code change that shouldn't even matter.
Reported-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/lkml/ZAV9nGG9e1%2FrV+L%2F@yury-laptop/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Initialize shift variable in mlxplat_mlxcpld_verify_bus_topology()
to 0 to avoid the following compile error:

drivers/platform/x86/mlx-platform.c:6013
 mlxplat_mlxcpld_verify_bus_topology() error: uninitialized symbol 'shift'.

Fixes: 50b823fd ("platform: mellanox: mlx-platform: Move bus shift assignment out of the loop")
Cc: Vadim Pasternak <vadimp@nvidia.com>
Cc: Michael Shych <michaelsh@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230307105842.286118-1-hdegoede@redhat.com

Add the INT347E GPIO lookup table to the board data for the Surface
Go 3. This is necessary to allow the ov7251 IR camera to probe
properly on that platform.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230302102611.314341-1-dan.scally@ideasonboard.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Fix warning displayed for "make W=1" for kernel documentation.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230211063257.311746-2-srinivas.pandruvada@linux.intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: ef0f6226 ("platform/x86: mlx-platform: Add physical bus number auto detection")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-7-rdunlap@infradead.orgSigned-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

For NVSW_SN2201, select REGMAP_I2C instead of depending on it.

Fixes: c6acad68 ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface")
Fixes: 5ec4a8ac ("platform/mellanox: Introduce support for Mellanox register access driver")
Fixes: 62f9529b ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Fixes: 662f2482 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Michael Shych <michaelsh@nvidia.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Vadim Pasternak <vadimp@nvidia.com>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-6-rdunlap@infradead.orgSigned-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Fix warning:
drivers/platform/x86/intel/tpmi.c:253 tpmi_create_device()
	warn: 'feature_vsec_dev' was already freed.

If there is some error, feature_vsec_dev memory is freed as part
of resource managed call intel_vsec_add_aux(). So, additional
kfree() call is not required.

Reordered res allocation and feature_vsec_dev, so that on error
only res is freed.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/platform-driver-x86/Y%2FxYR7WGiPayZu%2FR@kili/T/#u
Fixes: 47731fd2 ("platform/x86/intel: Intel TPMI enumeration driver")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230227140614.2913474-1-srinivas.pandruvada@linux.intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

A new command CONFIG_TDP_GET_RATIO_INFO is added, with sub command type
of 0x0C. The previous range of valid sub commands was from 0x00 to 0x0B.
Change the valid range from 0x00 to 0x0C.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230227053504.2734214-1-srinivas.pandruvada@linux.intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

After using the built-in UEFI hardware diagnostics to compare
the measured battery temperature, i noticed that the temperature
is actually expressed in tenth degree kelvin, similar to the
SBS-Data standard. For example, a value of 2992 is displayed as
26 degrees celsius.
Fix the scaling so that the correct values are being displayed.

Tested on a Dell Inspiron 3505.

Fixes: a77272c1 ("platform/x86: dell: Add new dell-wmi-ddv driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230218115318.20662-2-W_Armin@gmx.deSigned-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

If one or both sensor buffers could not be initialized, either
due to missing hardware support or due to some error during probing,
the resume handler will encounter undefined behaviour when
attempting to lock buffers then protected by an uninitialized or
destroyed mutex.
Fix this by introducing a "active" flag which is set during probe,
and only invalidate buffers which where flaged as "active".

Tested on a Dell Inspiron 3505.

Fixes: 3b7eeff9 ("platform/x86: dell-ddv: Add hwmon support")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230218115318.20662-1-W_Armin@gmx.deSigned-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

The amd_pmc_write_stb() function was previously hidden in an
ifdef to avoid a warning when CONFIG_SUSPEND is disabled, but
now there is an additional caller:

drivers/platform/x86/amd/pmc.c: In function 'amd_pmc_stb_debugfs_open_v2':
drivers/platform/x86/amd/pmc.c:256:8: error: implicit declaration of function 'amd_pmc_write_stb'; did you mean 'amd_pmc_read_stb'? [-Werror=implicit-function-declaration]
  256 |  ret = amd_pmc_write_stb(dev, AMD_PMC_STB_DUMMY_PC);
      |        ^~~~~~~~~~~~~~~~~
      |        amd_pmc_read_stb

There is now an easier way to handle this using DEFINE_SIMPLE_DEV_PM_OPS()
to replace all the #ifdefs, letting gcc drop any of the unused functions
silently.

Fixes: b0d4bb97 ("platform/x86/amd: pmc: Write dummy postcode into the STB DRAM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230214152512.806188-1-arnd@kernel.orgSigned-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

It turns out that commit 596ff4a0 ("cpumask: re-introduce
constant-sized cpumask optimizations") exposed a number of cases of
drivers not checking the result of "cpumask_next()" and friends
correctly.

The documented correct check for "no more cpus in the cpumask" is to
check for the result being equal or larger than the number of possible
CPU ids, exactly _because_ we've always done those constant-sized
cpumask scans using a widened type before.  So the return value of a
cpumask scan should be checked with

	if (cpu >= nr_cpu_ids)
		...

because the cpumask scan did not necessarily stop exactly *at* that
maximum CPU id.

But a few cases ended up instead using checks like

	if (cpu == nr_cpumask_bits)
		...

which used that internal "widened" number of bits.  And that used to
work pretty much by accident (ok, in this case "by accident" is simply
because it matched the historical internal implementation of the cpumask
scanning, so it was more of a "intentionally using implementation
details rather than an accident").

But the extended constant-sized optimizations then did that internal
implementation differently, and now that code that did things wrong but
matched the old implementation no longer worked at all.

Which then causes subsequent odd problems due to using what ends up
being an invalid CPU ID.

Most of these cases require either unusual hardware or special uses to
hit, but the random.c one triggers quite easily.

All you really need is to have a sufficiently small CONFIG_NR_CPUS value
for the bit scanning optimization to be triggered, but not enough CPUs
to then actually fill that widened cpumask.  At that point, the cpumask
scanning will return the NR_CPUS constant, which is _not_ the same as
nr_cpumask_bits.

This just does the mindless fix with

   sed -i 's/== nr_cpumask_bits/>= nr_cpu_ids/'

to fix the incorrect uses.

The ones in the SCSI lpfc driver in particular could probably be fixed
more cleanly by just removing that repeated pattern entirely, but I am
not emptionally invested enough in that driver to care.
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/481b19b5-83a0-4793-b4fd-194ad7b978c3@roeck-us.net/Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/lkml/CAMuHMdUKo_Sf7TjKzcNDa8Ve+6QrK+P8nSQrSQ=6LTRmcBKNww@mail.gmail.com/Reported-by: Vernon Yang <vernon2gm@gmail.com>
Link: https://lore.kernel.org/lkml/20230306160651.2016767-1-vernon2gm@gmail.com/
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The never used nr_cpumask_size is just a typo, hence use existing
redefinition that's called nr_cpumask_bits.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that address space operations are merge dfor in-ICB and normal
files, it is more likely some code mistakenly tries to map blocks for
in-ICB files. WARN and return error instead of silently returning
garbage.
Signed-off-by: Jan Kara <jack@suse.cz>

After merging address space operations of normal and in-ICB files,
readahead could get called for in-ICB files which resulted in
udf_get_block() being called for these files. udf_get_block() is not
prepared to be called for in-ICB files and ends up returning garbage
results as it interprets file data as extent list. Fix the problem by
skipping readahead for in-ICB files.

Fixes: 37a8a39f ("udf: Switch to single address_space_operations")
Signed-off-by: Jan Kara <jack@suse.cz>

The patch converting udf_adinicb_writepage() to avoid manually kmapping
the page used memcpy_to_page() however that copies in the wrong
direction (effectively overwriting file data with the old contents).
What we should be using is memcpy_from_page() to copy data from the page
into the inode and then mark inode dirty to store the data.

Fixes: 5cfc4532 ("udf: Convert udf_adinicb_writepage() to memcpy_to_page()")
Signed-off-by: Jan Kara <jack@suse.cz>

__get_kernel_nofault() does copy data in supervisor mode when
forcing a task backtrace log through /proc/sysrq_trigger.
This is expected cause a bus error exception on e.g. NULL
pointer dereferencing when logging a kernel task has no
workqueue associated. This bus error ought to be ignored.

Our 030 bus error handler is ill equipped to deal with this:

Whenever ssw indicates a kernel mode access on a data fault,
we don't even attempt to handle the fault and instead always
send a SEGV signal (or panic). As a result, the check
for exception handling at the fault PC (buried in
send_sig_fault() which gets called from do_page_fault()
eventually) is never used.

In contrast, both 040 and 060 access error handlers do not
care whether a fault happened on supervisor mode access,
and will call do_page_fault() on those, ultimately honoring
the exception table.

Add a check in bus_error030 to call do_page_fault() in case
we do have an entry for the fault PC in our exception table.

I had attempted a fix for this earlier in 2019 that did rely
on testing pagefault_disabled() (see link below) to achieve
the same thing, but this patch should be more generic.

Tested on 030 Atari Falcon.
Reported-by: Eero Tamminen <oak@helsinkinet.fi>
Link: https://lore.kernel.org/r/alpine.LNX.2.21.1904091023540.25@nippy.intranet
Link: https://lore.kernel.org/r/63130691-1984-c423-c1f2-73bfd8d3dcd3@gmail.comSigned-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230301021107.26307-1-schmitzmic@gmail.comSigned-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

When booting with an initial ramdisk on platforms where physical memory
does not start at address zero (e.g. on Amiga):

    initrd: 0ef0602c - 0f800000
    Zone ranges:
      DMA      [mem 0x0000000008000000-0x000000f7ffffffff]
      Normal   empty
    Movable zone start for each node
    Early memory node ranges
      node   0: [mem 0x0000000008000000-0x000000000f7fffff]
    Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff]
    Unable to handle kernel access at virtual address (ptrval)
    Oops: 00000000
    Modules linked in:
    PC: [<00201d3c>] memcmp+0x28/0x56

As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must
not be called before paging_init().  Hence postpone the phys_to_virt
handling for the initial ramdisk until after calling paging_init().

While at it, reduce #ifdef clutter by using IS_ENABLED() instead.

Fixes: 376e3fde ("m68k: Enable memtest functionality")
Reported-by: Stephen Walsh <vk3heg@vk3heg.net>
Link: https://lists.debian.org/debian-68k/2022/09/msg00007.htmlReported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/4f45f05f377bf3f5baf88dbd5c3c8aeac59d94f0.camel@physik.fu-berlin.deSigned-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/dff216da09ab7a60217c3fc2147e671ae07d636f.1677528627.git.geert@linux-m68k.org

The calculation of end addresses of memory chunks overflowed to 0 when
a memory chunk is located at the end of 32-bit address space.
This is the case for the HP300 architecture.

Link: https://lore.kernel.org/linux-m68k/CACz-3rhUo5pgNwdWHaPWmz+30Qo9xCg70wNxdf7o5x-6tXq8QQ@mail.gmail.com/Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230223112349.26675-1-jongk@linux-m68k.orgSigned-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Commit aa47a7c2 ("lib/cpumask: deprecate nr_cpumask_bits") resulted
in the cpumask operations potentially becoming hugely less efficient,
because suddenly the cpumask was always considered to be variable-sized.

The optimization was then later added back in a limited form by commit
6f9c07be ("lib/cpumask: add FORCE_NR_CPUS config option"), but that
FORCE_NR_CPUS option is not useful in a generic kernel and more of a
special case for embedded situations with fixed hardware.

Instead, just re-introduce the optimization, with some changes.

Instead of depending on CPUMASK_OFFSTACK being false, and then always
using the full constant cpumask width, this introduces three different
cpumask "sizes":

 - the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids.

   This is used for situations where we should use the exact size.

 - the "small" size (small_cpumask_bits) is the NR_CPUS constant if it
   fits in a single word and the bitmap operations thus end up able
   to trigger the "small_const_nbits()" optimizations.

   This is used for the operations that have optimized single-word
   cases that get inlined, notably the bit find and scanning functions.

 - the "large" size (large_cpumask_bits) is the NR_CPUS constant if it
   is an sufficiently small constant that makes simple "copy" and
   "clear" operations more efficient.

   This is arbitrarily set at four words or less.

As a an example of this situation, without this fixed size optimization,
cpumask_clear() will generate code like

        movl    nr_cpu_ids(%rip), %edx
        addq    $63, %rdx
        shrq    $3, %rdx
        andl    $-8, %edx
        callq   memset@PLT

on x86-64, because it would calculate the "exact" number of longwords
that need to be cleared.

In contrast, with this patch, using a MAX_CPU of 64 (which is quite a
reasonable value to use), the above becomes a single

	movq $0,cpumask

instruction instead, because instead of caring to figure out exactly how
many CPU's the system has, it just knows that the cpumask will be a
single word and can just clear it all.

Note that this does end up tightening the rules a bit from the original
version in another way: operations that set bits in the cpumask are now
limited to the actual nr_cpu_ids limit, whereas we used to do the
nr_cpumask_bits thing almost everywhere in the cpumask code.

But if you just clear bits, or scan for bits, we can use the simpler
compile-time constants.

In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()'
which were not useful, and which fundamentally have to be limited to
'nr_cpu_ids'.  Better remove them now than have somebody introduce use
of them later.

Of course, on x86-64 with MAXSMP there is no sane small compile-time
constant for the cpumask sizes, and we end up using the actual CPU bits,
and will generate the above kind of horrors regardless.  Please don't
use MAXSMP unless you really expect to have machines with thousands of
cores.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull crypto fix from Herbert Xu:
 "Fix a regression in the caam driver"

* tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - Fix edesc/iv ordering mixup

Pull x86 updates from Thomas Gleixner:
 "A small set of updates for x86:

   - Return -EIO instead of success when the certificate buffer for SEV
     guests is not large enough

   - Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared
     on return to userspace for performance reasons, but the leaves user
     space vulnerable to cross-thread attacks which STIBP prevents.
     Update the documentation accordingly"

* tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  virt/sev-guest: Return -EIO if certificate buffer is not large enough
  Documentation/hw-vuln: Document the interaction between IBRS and STIBP
  x86/speculation: Allow enabling STIBP with legacy IBRS

Pull irq updates from Thomas Gleixner:
 "A set of updates for the interrupt susbsystem:

   - Prevent possible NULL pointer derefences in
     irq_data_get_affinity_mask() and irq_domain_create_hierarchy()

   - Take the per device MSI lock before invoking code which relies on
     it being hold

   - Make sure that MSI descriptors are unreferenced before freeing
     them. This was overlooked when the platform MSI code was converted
     to use core infrastructure and results in a fals positive warning

   - Remove dead code in the MSI subsystem

   - Clarify the documentation for pci_msix_free_irq()

   - More kobj_type constification"

* tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced
  genirq/msi: Drop dead domain name assignment
  irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy()
  genirq/irqdesc: Make kobj_type structures constant
  PCI/MSI: Clarify usage of pci_msix_free_irq()
  genirq/msi: Take the per-device MSI lock before validating the control structure
  genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()

Pull vfs update from Al Viro:
 "Adding Christian Brauner as VFS co-maintainer"

* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Adding VFS co-maintainer

Pull VM_FAULT_RETRY fixes from Al Viro:
 "Some of the page fault handlers do not deal with the following case
  correctly:

   - handle_mm_fault() has returned VM_FAULT_RETRY

   - there is a pending fatal signal

   - fault had happened in kernel mode

  Correct action in such case is not "return unconditionally" - fatal
  signals are handled only upon return to userland and something like
  copy_to_user() would end up retrying the faulting instruction and
  triggering the same fault again and again.

  What we need to do in such case is to make the caller to treat that as
  failed uaccess attempt - handle exception if there is an exception
  handler for faulting instruction or oops if there isn't one.

  Over the years some architectures had been fixed and now are handling
  that case properly; some still do not. This series should fix the
  remaining ones.

  Status:

   - m68k, riscv, hexagon, parisc: tested/acked by maintainers.

   - alpha, sparc32, sparc64: tested locally - bug has been reproduced
     on the unpatched kernel and verified to be fixed by this series.

   - ia64, microblaze, nios2, openrisc: build, but otherwise completely
     untested"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  openrisc: fix livelock in uaccess
  nios2: fix livelock in uaccess
  microblaze: fix livelock in uaccess
  ia64: fix livelock in uaccess
  sparc: fix livelock in uaccess
  alpha: fix livelock in uaccess
  parisc: fix livelock in uaccess
  hexagon: fix livelock in uaccess
  riscv: fix livelock in uaccess
  m68k: fix livelock in uaccess

include/linux/compiler-intel.h had no update in the past 3 years.

We often forget about the third C compiler to build the kernel.

For example, commit a0a12c3e ("asm goto: eradicate CC_HAS_ASM_GOTO")
only mentioned GCC and Clang.

init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC,
and nobody has reported any issue.

I guess the Intel Compiler support is broken, and nobody is caring
about it.

Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is
deprecated:

    $ icc -v
    icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is
    deprecated and will be removed from product release in the second half
    of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended
    compiler moving forward. Please transition to use this compiler. Use
    '-diag-disable=10441' to disable this message.
    icc version 2021.7.0 (gcc version 12.1.0 compatibility)

Arnd Bergmann provided a link to the article, "Intel C/C++ compilers
complete adoption of LLVM".

lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept
untouched for better sync with https://github.com/facebook/zstd

Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.htmlSigned-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull more i2c updates from Wolfram Sang:
 "Some improvements/fixes for the newly added GXP driver and a Kconfig
  dependency fix"

* tag 'i2c-for-6.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: gxp: fix an error code in probe
  i2c: gxp: return proper error on address NACK
  i2c: gxp: remove "empty" switch statement
  i2c: Disable I2C_APPLE when I2C_PASEMI is a builtin

The migration code ends up temporarily stashing information of the wrong
type in unused fields of the newly allocated destination folio.  That
all works fine, but gcc does complain about the pointer type mis-use:

    mm/migrate.c: In function ‘__migrate_folio_extract’:
    mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’

     1050 |         *anon_vmap = (void *)dst->mapping;
          |         ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~

and gcc is actually right to complain since it really doesn't understand
that this is a very temporary special case where this is ok.

This could be fixed in different ways by just obfuscating the assignment
sufficiently that gcc doesn't see what is going on, but the truly
"proper C" way to do this is by explicitly using a union.

Using unions for type conversions like this is normally hugely ugly and
syntactically nasty, but this really is one of the few cases where we
want to make it clear that we're not doing type conversion, we're really
re-using the value bit-for-bit just using another type.

IOW, this should not become a common pattern, but in this one case using
that odd union is probably the best way to document to the compiler what
is conceptually going on here.

[ Side note: there are valid cases where we convert pointers to other
  pointer types, notably the whole "folio vs page" situation, where the
  types actually have fundamental commonalities.

  The fact that the gcc note is limited to just randomized structures
  means that we don't see equivalent warnings for those cases, but it
  migth also mean that we miss other cases where we do play these kinds
  of dodgy games, and this kind of explicit conversion might be a good
  idea. ]

I verified that at least for an allmodconfig build on x86-64, this
generates the exact same code, apart from line numbers and assembler
comment changes.

Fixes: 64c8902e ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "17 hotfixes.

  Eight are for MM and seven are for other parts of the kernel. Seven
  are cc:stable and eight address post-6.3 issues or were judged
  unsuitable for -stable backporting"

* tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mailmap: map Dikshita Agarwal's old address to his current one
  mailmap: map Vikash Garodia's old address to his current one
  fs/cramfs/inode.c: initialize file_ra_state
  fs: hfsplus: fix UAF issue in hfsplus_put_super
  panic: fix the panic_print NMI backtrace setting
  lib: parser: update documentation for match_NUMBER functions
  kasan, x86: don't rename memintrinsics in uninstrumented files
  kasan: test: fix test for new meminstrinsic instrumentation
  kasan: treat meminstrinsic as builtins in uninstrumented files
  kasan: emit different calls for instrumentable memintrinsics
  ocfs2: fix non-auto defrag path not working issue
  ocfs2: fix defrag path triggering jbd2 ASSERT
  mailmap: map Georgi Djakov's old Linaro address to his current one
  mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON
  lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH
  mm/damon/paddr: fix missing folio_put()
  mm/mremap: fix dup_anon_vma() in vma_merge() case 4