Pull dmaengine fixes from Vinod Koul:

 - email address Update for Jie Hai

 - fix double increment of client_count in dma_chan_get()

 - idxd driver fixes: use after free, probe error handling and callback
   on wq disable

 - fix for qcom gpi driver GO tre

 - ptdma locking fix

 - tegra & imx-sdma mem leak fix

* tag 'dmaengine-fix-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  ptdma: pt_core_execute_cmd() should use spinlock
  dmaengine: tegra: Fix memory leak in terminate_all()
  dmaengine: xilinx_dma: call of_node_put() when breaking out of for_each_child_of_node()
  dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init
  dmaengine: Fix double increment of client_count in dma_chan_get()
  dmaengine: tegra210-adma: fix global intr clear
  Add exception protection processing for vd in axi_chan_handle_err function
  dmaengine: lgm: Move DT parsing after initialization
  MAINTAINERS: update Jie Hai's email address
  dmaengine: ti: k3-udma: Do conditional decrement of UDMA_CHAN_RT_PEER_BCNT_REG
  dmaengine: idxd: Do not call DMX TX callbacks during workqueue disable
  dmaengine: idxd: Prevent use after free on completion memory
  dmaengine: idxd: Let probe fail when workqueue cannot be enabled
  dmaengine: qcom: gpi: Set link_rx bit on GO TRE for rx operation

Pull phy fixes from Vinod Koul:

 - binding fix for g12a phys

 - Kconfig operator precedence for TI driver

 - renesas: register setting

 - sunplus: null deref fix

 - rockchip-inno fix for clk_disable_unprepare()

 - MDM9607 init sequence revert due to regression

* tag 'phy-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: phy-can-transceiver: Skip warning if no "max-bitrate"
  dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation
  dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation
  phy: freescale: imx8m-pcie: Add one missing error return
  phy: Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence"
  phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in rockchip_usb2phy_power_on()
  phy: renesas: r8a779f0-eth-serdes: Fix register setting
  phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe()
  phy: ti: fix Kconfig warning and operator precedence

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless, bluetooth, bpf and netfilter.

  Current release - regressions:

   - Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6
     addrconf", fix nsna_ping mode of team

   - wifi: mt76: fix bugs in Rx queue handling and DMA mapping

   - eth: mlx5:
      - add missing mutex_unlock in error reporter
      - protect global IPsec ASO with a lock

  Current release - new code bugs:

   - rxrpc: fix wrong error return in rxrpc_connect_call()

  Previous releases - regressions:

   - bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2

   - wifi:
      - mac80211: fix crashes on Rx due to incorrect initialization of
        rx->link and rx->link_sta
      - mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect
        aggregation handling, crashes
      - brcmfmac: fix regression for Broadcom PCIe wifi devices
      - rndis_wlan: prevent buffer overflow in rndis_query_oid

   - netfilter: conntrack: handle tcp challenge acks during connection
     reuse

   - sched: avoid grafting on htb_destroy_class_offload when destroying

   - virtio-net: correctly enable callback during start_xmit, fix stalls

   - tcp: avoid the lookup process failing to get sk in ehash table

   - ipa: disable ipa interrupt during suspend

   - eth: stmmac: enable all safety features by default

  Previous releases - always broken:

   - bpf:
      - fix pointer-leak due to insufficient speculative store bypass
        mitigation (Spectre v4)
      - skip task with pid=1 in send_signal_common() to avoid a splat
      - fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
        PERF_BPF_EVENT_PROG_UNLOAD events
      - fix potential deadlock in htab_lock_bucket from same bucket
        index but different map_locked index

   - bluetooth:
      - fix a buffer overflow in mgmt_mesh_add()
      - hci_qca: fix driver shutdown on closed serdev
      - ISO: fix possible circular locking dependency
      - CIS: hci_event: fix invalid wait context

   - wifi: brcmfmac: fixes for survey dump handling

   - mptcp: explicitly specify sock family at subflow creation time

   - netfilter: nft_payload: incorrect arithmetics when fetching VLAN
     header bits

   - tcp: fix rate_app_limited to default to 1

   - l2tp: close all race conditions in l2tp_tunnel_register()

   - eth: mlx5: fixes for QoS config and eswitch configuration

   - eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp()

   - eth: stmmac: fix invalid call to mdiobus_get_phy()

  Misc:

   - ethtool: add netlink attr in rss get reply only if the value is not
     empty"

* tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
  Revert "Merge branch 'octeontx2-af-CPT'"
  tcp: fix rate_app_limited to default to 1
  bnxt: Do not read past the end of test names
  net: stmmac: enable all safety features by default
  octeontx2-af: add mbox to return CPT_AF_FLT_INT info
  octeontx2-af: update cpt lf alloc mailbox
  octeontx2-af: restore rxc conf after teardown sequence
  octeontx2-af: optimize cpt pf identification
  octeontx2-af: modify FLR sequence for CPT
  octeontx2-af: add mbox for CPT LF reset
  octeontx2-af: recover CPT engine when it gets fault
  net: dsa: microchip: ksz9477: port map correction in ALU table entry register
  selftests/net: toeplitz: fix race on tpacket_v3 block close
  net/ulp: use consistent error code when blocking ULP
  octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt
  tcp: avoid the lookup process failing to get sk in ehash table
  Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf"
  MAINTAINERS: add networking entries for Willem
  net: sched: gred: prevent races when adding offloads to stats
  l2tp: prevent lockdep issue in l2tp_tunnel_register()
  ...

This reverts commit b4fbf0b2, reversing
changes made to 6c977c5c.

This seems like net-next material.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The initial default value of 0 for tp->rate_app_limited was incorrect,
since a flow is indeed application-limited until it first sends
data. Fixing the default to be 1 is generally correct but also
specifically will help user-space applications avoid using the initial
tcpi_delivery_rate value of 0 that persists until the connection has
some non-zero bandwidth sample.

Fixes: eb8329e0 ("tcp: export data delivery rate")
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test names were being concatenated based on a offset beyond the end of
the first name, which tripped the buffer overflow detection logic:

 detected buffer overflow in strnlen
 [...]
 Call Trace:
 bnxt_ethtool_init.cold+0x18/0x18

Refactor struct hwrm_selftest_qlist_output to use an actual array,
and adjust the concatenation to use snprintf() rather than a series of
strncat() calls.
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Fixes: eb513658 ("bnxt_en: Add basic ethtool -t selftest support.")
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the original implementation of dwmac5
commit 8bf993a5 ("net: stmmac: Add support for DWMAC5 and implement Safety Features")
all safety features were enabled by default.

Later it seems some implementations didn't have support for all the
features, so in
commit 5ac712dc ("net: stmmac: enable platform specific safety features")
the safety_feat_cfg structure was added to the callback and defined for
some platforms to selectively enable these safety features.

The problem is that only certain platforms were given that software
support. If the automotive safety package bit is set in the hardware
features register the safety feature callback is called for the platform,
and for platforms that didn't get a safety_feat_cfg defined this results
in the following NULL pointer dereference:

[    7.933303] Call trace:
[    7.935812]  dwmac5_safety_feat_config+0x20/0x170 [stmmac]
[    7.941455]  __stmmac_open+0x16c/0x474 [stmmac]
[    7.946117]  stmmac_open+0x38/0x70 [stmmac]
[    7.950414]  __dev_open+0x100/0x1dc
[    7.954006]  __dev_change_flags+0x18c/0x204
[    7.958297]  dev_change_flags+0x24/0x6c
[    7.962237]  do_setlink+0x2b8/0xfa4
[    7.965827]  __rtnl_newlink+0x4ec/0x840
[    7.969766]  rtnl_newlink+0x50/0x80
[    7.973353]  rtnetlink_rcv_msg+0x12c/0x374
[    7.977557]  netlink_rcv_skb+0x5c/0x130
[    7.981500]  rtnetlink_rcv+0x18/0x2c
[    7.985172]  netlink_unicast+0x2e8/0x340
[    7.989197]  netlink_sendmsg+0x1a8/0x420
[    7.993222]  ____sys_sendmsg+0x218/0x280
[    7.997249]  ___sys_sendmsg+0xac/0x100
[    8.001103]  __sys_sendmsg+0x84/0xe0
[    8.004776]  __arm64_sys_sendmsg+0x24/0x30
[    8.008983]  invoke_syscall+0x48/0x114
[    8.012840]  el0_svc_common.constprop.0+0xcc/0xec
[    8.017665]  do_el0_svc+0x38/0xb0
[    8.021071]  el0_svc+0x2c/0x84
[    8.024212]  el0t_64_sync_handler+0xf4/0x120
[    8.028598]  el0t_64_sync+0x190/0x194

Go back to the original behavior, if the automotive safety package
is found to be supported in hardware enable all the features unless
safety_feat_cfg is passed in saying this particular platform only
supports a subset of the features.

Fixes: 5ac712dc ("net: stmmac: enable platform specific safety features")
Reported-by: Ning Cai <ncai@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Srujana Challa says:

====================
octeontx2-af: Miscellaneous changes for CPT

This patchset consists of miscellaneous changes for CPT.
- Adds a new mailbox to reset the requested CPT LF.
- Modify FLR sequence as per HW team suggested.
- Adds support to recover CPT engines when they gets fault.
- Updates CPT inbound inline IPsec configuration mailbox,
  as per new generation of the OcteonTX2 chips.
- Adds a new mailbox to return CPT FLT Interrupt info.

---
v2:
- Addressed a review comment.
v1:
- Dropped patch "octeontx2-af: Fix interrupt name strings completely"
  to submit to net.
---
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

CPT HW would trigger the CPT AF FLT interrupt when CPT engines
hits some uncorrectable errors and AF is the one which receives
the interrupt and recovers the engines.
This patch adds a mailbox for CPT VFs to request for CPT faulted
and recovered engines info.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The CN10K CPT coprocessor contains a context processor
to accelerate updates to the IPsec security association
contexts. The context processor contains a context cache.
This patch updates CPT LF ALLOC mailbox to config ctx_ilen
requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of
initial context fetch.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CN10K CPT coprocessor includes a component named RXC which
is responsible for reassembly of inner IP packets. RXC has
the feature to evict oldest entries based on age/threshold.
The age/threshold is being set to minimum values to evict
all entries at the time of teardown.
This patch adds code to restore timeout and threshold config
after teardown sequence is complete as it is global config.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Optimize CPT PF identification in mbox handling for faster
mbox response by doing it at AF driver probe instead of
every mbox message.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On OcteonTX2 platform CPT instruction enqueue is only
possible via LMTST operations.
The existing FLR sequence mentioned in HRM requires
a dummy LMTST to CPT but LMTST can't be submitted from
AF driver. So, HW team provided a new sequence to avoid
dummy LMTST. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On OcteonTX2 SoC, the admin function (AF) is the only one with all
priviliges to configure HW and alloc resources, PFs and it's VFs
have to request AF via mailbox for all their needs.
This patch adds a new mailbox for CPT VFs to request for CPT LF
reset.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When CPT engine has uncorrectable errors, it will get halted and
must be disabled and re-enabled. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Prevent reading into undefined memory in the expression lexer,
   accounting for a trailer backslash followed by the null byte.

 - Fix file mode when copying files to the build id cache, the problem
   happens when the cache directory is in a different file system than
   the file being cached, otherwise the mode was preserved as only a
   hard link would be done to save space.

 - Fix a related build-id 'perf test' entry that checked that permission
   when caching PE (Portable Executable) files, used when profiling
   Windows executables under wine.

 - Sync the tools/ copies of kvm headers, build_bug.h, socket.h and
   arm64's cputype.h with the kernel sources.

* tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf test build-id: Fix test check for PE file
  perf buildid-cache: Fix the file mode with copyfile() while adding file to build-id cache
  perf expr: Prevent normalize() from reading into undefined memory in the expression lexer
  tools headers: Syncronize linux/build_bug.h with the kernel sources
  perf beauty: Update copy of linux/socket.h with the kernel sources
  tools headers arm64: Sync arm64's cputype.h with the kernel sources
  tools kvm headers arm64: Update KVM header from the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources

Pull printk fixes from Petr Mladek:

 - Prevent a potential deadlock when configuring kgdb console

 - Fix a kernel doc warning

* tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  kernel/printk/printk.c: Fix W=1 kernel-doc warning
  tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()

Pull s390 build fix from Heiko Carstens:

 - Workaround invalid gcc-11 out of bounds read warning caused by s390's
   S390_lowcore definition. This happens only with gcc 11.1.0 and
   11.2.0.

   The code which causes this warning will be gone with the next merge
   window. Therefore just replace the memcpy() with a for loop to get
   rid of the warning.

* tag 's390-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: workaround invalid gcc-11 out of bounds read warning

Pull slab fix from Vlastimil Babka:
 "Just a single fix, since the lkp report originally for a slub-tiny
  commit ended up being a gcov/compiler bug:

   - periodically resched in SLAB's drain_freelist(), by David Rientjes"

* tag 'slab-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm, slab: periodically resched in drain_freelist()

Pull zonefs fix from Damien Le Moal:

 - A single patch to fix sync write operations to detect and handle
   errors due to external zone corruptions resulting in writes at
   invalid location, from me.

* tag 'zonefs-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Detect append writes at invalid locations

ALU table entry 2 register in KSZ9477 have bit positions reserved for
forwarding port map. This field is referred in ksz9477_fdb_del() for
clearing forward port map and alu table.

But current fdb_del refer ALU table entry 3 register for accessing forward
port map. Update ksz9477_fdb_del() to get forward port map from correct
alu table entry register.

With this bug, issue can be observed while deleting static MAC entries.
Delete any specific MAC entry using "bridge fdb del" command. This should
clear all the specified MAC entries. But it is observed that entries with
self static alone are retained.

Tested on LAN9370 EVB since ksz9477_fdb_del() is used common across
LAN937x and KSZ series.

Fixes: b987e98e ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230118174735.702377-1-rakesh.sankaranarayanan@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Avoid race between process wakeup and tpacket_v3 block timeout.

The test waits for cfg_timeout_msec for packets to arrive. Packets
arrive in tpacket_v3 rings, which pass packets ("frames") to the
process in batches ("blocks"). The sk waits for req3.tp_retire_blk_tov
msec to release a block.

Set the block timeout lower than the process waiting time, else
the process may find that no block has been released by the time it
scans the socket list. Convert to a ring of more than one, smaller,
blocks with shorter timeouts. Blocks must be page aligned, so >= 64KB.

Fixes: 5ebfb4cc ("selftests/net: toeplitz test")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230118151847.4124260-1-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The referenced commit changed the error code returned by the kernel
when preventing a non-established socket from attaching the ktls
ULP. Before to such a commit, the user-space got ENOTCONN instead
of EINVAL.

The existing self-tests depend on such error code, and the change
caused a failure:

  RUN           global.non_established ...
 tls.c:1673:non_established:Expected errno (22) == ENOTCONN (107)
 non_established: Test failed at step #3
          FAIL  global.non_established

In the unlikely event existing applications do the same, address
the issue by restoring the prior error code in the above scenario.

Note that the only other ULP performing similar checks at init
time - smc_ulp_ops - also fails with ENOTCONN when trying to attach
the ULP to a non-established socket.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Fixes: 2c02d41d ("net/ulp: prevent ULP without clone op from entering the LISTEN status")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/7bb199e7a93317fb6f8bf8b9b2dc71c18f337cde.1674042685.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net: mlx5: eliminate anonymous module_init & module_exit
  net/mlx5: E-switch, Fix switchdev mode after devlink reload
  net/mlx5e: Protect global IPsec ASO
  net/mlx5e: Remove optimization which prevented update of ESN state
  net/mlx5e: Set decap action based on attr for sample
  net/mlx5e: QoS, Fix wrongfully setting parent_element_id on MODIFY_SCHEDULING_ELEMENT
  net/mlx5: E-switch, Fix setting of reserved fields on MODIFY_SCHEDULING_ELEMENT
  net/mlx5e: Remove redundant xsk pointer check in mlx5e_mpwrq_validate_xsk
  net/mlx5e: Avoid false lock dependency warning on tc_ht even more
  net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work()
====================

Link: https://lore.kernel.org/r/Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The interrupt handler (pt_core_irq_handler()) of the ptdma
driver can be called from interrupt context. The code flow
in this function can lead down to pt_core_execute_cmd() which
will attempt to grab a mutex, which is not appropriate in
interrupt context and ultimately leads to a kernel panic.
The fix here changes this mutex to a spinlock, which has
been verified to resolve the issue.

Fixes: fa5d823b ("dmaengine: ptdma: Initial driver for the AMD PTDMA")
Signed-off-by: Eric Pilmore <epilmore@gigaio.com>
Link: https://lore.kernel.org/r/20230119033907.35071-1-epilmore@gigaio.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The commit 4af1b64f ("octeontx2-pf: Fix lmtst ID used in aura
free") uses the get/put_cpu() to protect the usage of percpu pointer
in ->aura_freeptr() callback, but it also unnecessarily disable the
preemption for the blockable memory allocation. The commit 87b93b67
("octeontx2-pf: Avoid use of GFP_KERNEL in atomic context") tried to
fix these sleep inside atomic warnings. But it only fix the one for
the non-rt kernel. For the rt kernel, we still get the similar warnings
like below.
  BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
  in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
  preempt_count: 1, expected: 0
  RCU nest depth: 0, expected: 0
  3 locks held by swapper/0/1:
   #0: ffff800009fc5fe8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30
   #1: ffff000100c276c0 (&mbox->lock){+.+.}-{3:3}, at: otx2_init_hw_resources+0x8c/0x3a4
   #2: ffffffbfef6537e0 (&cpu_rcache->lock){+.+.}-{2:2}, at: alloc_iova_fast+0x1ac/0x2ac
  Preemption disabled at:
  [<ffff800008b1908c>] otx2_rq_aura_pool_init+0x14c/0x284
  CPU: 20 PID: 1 Comm: swapper/0 Tainted: G        W          6.2.0-rc3-rt1-yocto-preempt-rt #1
  Hardware name: Marvell OcteonTX CN96XX board (DT)
  Call trace:
   dump_backtrace.part.0+0xe8/0xf4
   show_stack+0x20/0x30
   dump_stack_lvl+0x9c/0xd8
   dump_stack+0x18/0x34
   __might_resched+0x188/0x224
   rt_spin_lock+0x64/0x110
   alloc_iova_fast+0x1ac/0x2ac
   iommu_dma_alloc_iova+0xd4/0x110
   __iommu_dma_map+0x80/0x144
   iommu_dma_map_page+0xe8/0x260
   dma_map_page_attrs+0xb4/0xc0
   __otx2_alloc_rbuf+0x90/0x150
   otx2_rq_aura_pool_init+0x1c8/0x284
   otx2_init_hw_resources+0xe4/0x3a4
   otx2_open+0xf0/0x610
   __dev_open+0x104/0x224
   __dev_change_flags+0x1e4/0x274
   dev_change_flags+0x2c/0x7c
   ic_open_devs+0x124/0x2f8
   ip_auto_config+0x180/0x42c
   do_one_initcall+0x90/0x4dc
   do_basic_setup+0x10c/0x14c
   kernel_init_freeable+0x10c/0x13c
   kernel_init+0x2c/0x140
   ret_from_fork+0x10/0x20

Of course, we can shuffle the get/put_cpu() to only wrap the invocation
of ->aura_freeptr() as what commit 87b93b67 does. But there are only
two ->aura_freeptr() callbacks, otx2_aura_freeptr() and
cn10k_aura_freeptr(). There is no usage of perpcu variable in the
otx2_aura_freeptr() at all, so the get/put_cpu() seems redundant to it.
We can move the get/put_cpu() into the corresponding callback which
really has the percpu variable usage and avoid the sprinkling of
get/put_cpu() in several places.

Fixes: 4af1b64f ("octeontx2-pf: Fix lmtst ID used in aura free")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://lore.kernel.org/r/20230118071300.3271125-1-haokexin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

While one cpu is working on looking up the right socket from ehash
table, another cpu is done deleting the request socket and is about
to add (or is adding) the big socket from the table. It means that
we could miss both of them, even though it has little chance.

Let me draw a call trace map of the server side.
   CPU 0                           CPU 1
   -----                           -----
tcp_v4_rcv()                  syn_recv_sock()
                            inet_ehash_insert()
                            -> sk_nulls_del_node_init_rcu(osk)
__inet_lookup_established()
                            -> __sk_nulls_add_node_rcu(sk, list)

Notice that the CPU 0 is receiving the data after the final ack
during 3-way shakehands and CPU 1 is still handling the final ack.

Why could this be a real problem?
This case is happening only when the final ack and the first data
receiving by different CPUs. Then the server receiving data with
ACK flag tries to search one proper established socket from ehash
table, but apparently it fails as my map shows above. After that,
the server fetches a listener socket and then sends a RST because
it finds a ACK flag in the skb (data), which obeys RST definition
in RFC 793.

Besides, Eric pointed out there's one more race condition where it
handles tw socket hashdance. Only by adding to the tail of the list
before deleting the old one can we avoid the race if the reader has
already begun the bucket traversal and it would possibly miss the head.

Many thanks to Eric for great help from beginning to end.

Fixes: 5e0724d0 ("tcp/dccp: fix hashdance race for passive sessions")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/lkml/20230112065336.41034-1-kerneljasonxing@gmail.com/
Link: https://lore.kernel.org/r/20230118015941.1313-1-kerneljasonxing@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This reverts commit 0aa64df3.

Currently IFF_NO_ADDRCONF is used to prevent all ipv6 addrconf for the
slave ports of team, bonding and failover devices and it means no ipv6
packets can be sent out through these slave ports. However, for team
device, "nsna_ping" link_watch requires ipv6 addrconf. Otherwise, the
link will be marked failure. This patch removes the IFF_NO_ADDRCONF
flag set for team port, and we will fix the original issue in another
patch, as Jakub suggested.

Fixes: 0aa64df3 ("net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/63e09531fc47963d2e4eff376653d3db21b97058.1673980932.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We often have to ping Willem asking for reviews of patches
because he doesn't get included in the CC list. Add MAINTAINERS
entries for some of the areas he covers so that ./scripts/ will
know to add him.
Acked-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230117190141.60795-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Naresh reports seeing a warning that gred is calling
u64_stats_update_begin() with preemption enabled.
Arnd points out it's coming from _bstats_update().

We should be holding the qdisc lock when writing
to stats, they are also updated from the datapath.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/all/CA+G9fYsTr9_r893+62u6UGD3dVaCE-kN9C-Apmb2m=hxjc1Cqg@mail.gmail.com/
Fixes: e49efd52 ("net: sched: gred: support reporting stats from offloads")
Link: https://lore.kernel.org/r/20230113044137.1383067-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kalle Valo says:

====================
wireless fixes for v6.2

Third set of fixes for v6.2. This time most of them are for drivers,
only one revert for mac80211. For an important mt76 fix we had to
cherry pick two commits from wireless-next.

* tag 'wireless-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  Revert "wifi: mac80211: fix memory leak in ieee80211_if_add()"
  wifi: mt76: dma: fix a regression in adding rx buffers
  wifi: mt76: handle possible mt76_rx_token_consume failures
  wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails
  wifi: rndis_wlan: Prevent buffer overflow in rndis_query_oid
  wifi: brcmfmac: fix regression for Broadcom PCIe wifi devices
  wifi: brcmfmac: avoid NULL-deref in survey dump for 2G only device
  wifi: brcmfmac: avoid handling disabled channels for survey dump
====================

Link: https://lore.kernel.org/r/20230118073749.AF061C433EF@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull HID fixes from Jiri Kosina:

 - fixes for potential empty list handling in HID core (Pietro Borrello)

 - fix for NULL pointer dereference in betop driver that could be
   triggered by malicious device (Pietro Borrello)

 - fixes for handling calibration data preventing division by zero in
   Playstation driver (Roderick Colenbrander)

 - fix for memory leak on error path in amd-sfh driver (Basavaraj
   Natikar)

 - other few assorted small fixes and device ID-specific handling

* tag 'for-linus-2023011801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: betop: check shape of output reports
  HID: playstation: sanity check DualSense calibration data.
  HID: playstation: sanity check DualShock4 calibration data.
  HID: uclogic: Add support for XP-PEN Deco 01 V2
  HID: revert CHERRY_MOUSE_000C quirk
  HID: check empty report_list in bigben_probe()
  HID: check empty report_list in hid_validate_values()
  HID: amd_sfh: Fix warning unwind goto
  HID: intel_ish-hid: Add check for ishtp_dma_tx_map

Pull affs fix from David Sterba:
 "One minor fix for a KCSAN report"

* tag 'affs-for-6.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  affs: initialize fsdata in affs_truncate()

Pull erofs fixes from Gao Xiang:
 "Two patches fixes issues reported by syzbot, one fixes a missing
  `domain_id` mount option in documentation and a minor cleanup:

   - Fix wrong iomap->length calculation post EOF, which could cause a
     WARN_ON in iomap_iter_done() (Siddh)

   - Fix improper kvcalloc() use with __GFP_NOFAIL (me)

   - Add missing `domain_id` mount option in documentation (Jingbo)

   - Clean up fscache option parsing (Jingbo)"

* tag 'erofs-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: clean up parsing of fscache related options
  erofs: add documentation for 'domain_id' mount option
  erofs: fix kvcalloc() misuse with __GFP_NOFAIL
  erofs/zmap.c: Fix incorrect offset calculation

Merge tag 'loongarch-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix a missing elf_hwcap, fix some stack unwinder bugs and two trivial
  cleanups"

* tag 'loongarch-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Add generic ex-handler unwind in prologue unwinder
  LoongArch: Strip guess unwinder out from prologue unwinder
  LoongArch: Use correct sp value to get graph addr in stack unwinders
  LoongArch: Get frame info in unwind_start() when regs is not available
  LoongArch: Adjust PC value when unwind next frame in unwinder
  LoongArch: Simplify larch_insn_gen_xxx implementation
  LoongArch: Use common function sign_extend64()
  LoongArch: Add HWCAP_LOONGARCH_CPUCFG to elf_hwcap

According to the DT bindings, the "max-bitrate" property is optional.
However, when it is not present, a warning is printed.
Fix this by adding a missing check for -EINVAL.

Fixes: a4a86d27 ("phy: phy-can-transceiver: Add support for generic CAN transceiver driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/88e158f97dd52ebaa7126cd9631f34764b9c0795.1674037334.git.geert+renesas@glider.beSigned-off-by: Vinod Koul <vkoul@kernel.org>

The compatible strings in the driver don't have the meson prefix.
Fix this in the documentation and rename the file accordingly.

Fixes: da86d286 ("dt-bindings: phy: meson-g12a-usb2-phy: convert to yaml")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/8d960029-e94d-224b-911f-03e5deb47ebc@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The compatible string in the driver doesn't have the meson prefix.
Fix this in the documentation and rename the file accordingly.

Fixes: 87a55485 ("dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/0a82be92-ce85-da34-9d6f-4b33034473e5@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Terminate vdesc when terminating an ongoing transfer.
This will ensure that the vdesc is present in the desc_terminated list
The descriptor will be freed later in desc_free_list().

This fixes the memory leaks which can happen when terminating an
ongoing transfer.

Fixes: ee170280 ("dmaengine: tegra: Add tegra gpcdma driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Link: https://lore.kernel.org/r/20230118115801.15210-1-akhilrajeev@nvidia.comSigned-off-by: Vinod Koul <vkoul@kernel.org>