Recent changes breaks HCIGETDEVINFO since it changes the size of
hci_dev_info.

Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

__flow_hash_consistentify() wrongly swaps ipv4 addresses in few cases.
This function is indirectly used by __skb_get_hash_symmetric(), which is
used to fanout packets in AF_PACKET.
Intrusion detection systems may be impacted by this issue.

__flow_hash_consistentify() computes the addresses difference then swaps
them if the difference is negative. In few cases src - dst and dst - src
are both negative.

The following snippet mimics __flow_hash_consistentify():

```
 #include <stdio.h>
 #include <stdint.h>

 int main(int argc, char** argv) {

     int diffs_d, diffd_s;
     uint32_t dst  = 0xb225a8c0; /* 178.37.168.192 --> 192.168.37.178 */
     uint32_t src  = 0x3225a8c0; /*  50.37.168.192 --> 192.168.37.50  */
     uint32_t dst2 = 0x3325a8c0; /*  51.37.168.192 --> 192.168.37.51  */

     diffs_d = src - dst;
     diffd_s = dst - src;

     printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n",
             src, dst, diffs_d, diffs_d, diffd_s, diffd_s);

     diffs_d = src - dst2;
     diffd_s = dst2 - src;

     printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n",
             src, dst2, diffs_d, diffs_d, diffd_s, diffd_s);

     return 0;
 }
```

Results:

src:3225a8c0 dst:b225a8c0, \
    diff(s-d)=-2147483648(0x80000000) \
    diff(d-s)=-2147483648(0x80000000)

src:3225a8c0 dst:3325a8c0, \
    diff(s-d)=-16777216(0xff000000) \
    diff(d-s)=16777216(0x1000000)

In the first case the addresses differences are always < 0, therefore
__flow_hash_consistentify() always swaps, thus dst->src and src->dst
packets have differents hashes.

Fixes: c3f83241 ("net: Add full IPv6 addresses to flow_keys")
Signed-off-by: Ludovic Cintrat <ludovic.cintrat@gatewatcher.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an AF_PACKET socket is used to send packets through ipvlan and the
default xmit function of the AF_PACKET socket is changed from
dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option
name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and
remains as the initial value of 65535, this may trigger slab-out-of-bounds
bugs as following:

=================================================================
UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6
ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33
all Trace:
print_address_description.constprop.0+0x1d/0x160
print_report.cold+0x4f/0x112
kasan_report+0xa3/0x130
ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
ipvlan_start_xmit+0x29/0xa0 [ipvlan]
__dev_direct_xmit+0x2e2/0x380
packet_direct_xmit+0x22/0x60
packet_snd+0x7c9/0xc40
sock_sendmsg+0x9a/0xa0
__sys_sendto+0x18a/0x230
__x64_sys_sendto+0x74/0x90
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd

The root cause is:
  1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW
     and skb->protocol is not specified as in packet_parse_headers()

  2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit()

In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is
called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which
use "skb->head + skb->mac_header", out-of-bound access occurs.

This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2()
and reset mac header in multicast to solve this out-of-bound bug.

Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Westhal says:

====================
netfilter: bugfixes for net

The following set contains four netfilter patches for your *net* tree.

When there are multiple Contact headers in a SIP message its possible
the next headers won't be found because the SIP helper confuses relative
and absolute offsets in the message.  From Igor Ryzhov.

Make the nft_concat_range self-test support socat, this makes the
selftest pass on my test VM, from myself.

nf_conntrack_irc helper can be tricked into opening a local port forward
that the client never requested by embedding a DCC message in a PING
request sent to the client.  Fix from David Leadbeater.

Both have been broken since the kernel 2.6.x days.

The 'osf' match might indicate success while it could not find
anything, broken since 5.2 .  Fix from Pablo Neira.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Paolo Abeni:
 "Including fixes from rxrpc, netfilter, wireless and bluetooth
  subtrees.

  Current release - regressions:

   - skb: export skb drop reaons to user by TRACE_DEFINE_ENUM

   - bluetooth: fix regression preventing ACL packet transmission

  Current release - new code bugs:

   - dsa: microchip: fix kernel oops on ksz8 switches

   - dsa: qca8k: fix NULL pointer dereference for
     of_device_get_match_data

  Previous releases - regressions:

   - netfilter: clean up hook list when offload flags check fails

   - wifi: mt76: fix crash in chip reset fail

   - rxrpc: fix ICMP/ICMP6 error handling

   - ice: fix DMA mappings leak

   - i40e: fix kernel crash during module removal

  Previous releases - always broken:

   - ipv6: sr: fix out-of-bounds read when setting HMAC data.

   - tcp: TX zerocopy should not sense pfmemalloc status

   - sch_sfb: don't assume the skb is still around after
     enqueueing to child

   - netfilter: drop dst references before setting

   - wifi: wilc1000: fix DMA on stack objects

   - rxrpc: fix an insufficiently large sglist in
     rxkad_verify_packet_2()

   - fec: use a spinlock to guard `fep->ptp_clk_on`

  Misc:

   - usb: qmi_wwan: add Quectel RM520N"

* tag 'net-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
  sch_sfb: Also store skb len before calling child enqueue
  net: phy: lan87xx: change interrupt src of link_up to comm_ready
  net/smc: Fix possible access to freed memory in link clear
  net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb
  net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
  net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear
  net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set
  net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio
  net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet
  net: usb: qmi_wwan: add Quectel RM520N
  net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data
  tcp: fix early ETIMEDOUT after spurious non-SACK RTO
  stmmac: intel: Simplify intel_eth_pci_remove()
  net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()
  ipv6: sr: fix out-of-bounds read when setting HMAC data.
  bonding: accept unsolicited NA message
  bonding: add all node mcast address when slave up
  bonding: use unspecified address if no available link local address
  wifi: use struct_group to copy addresses
  wifi: mac80211_hwsim: check length for virtio packets
  ...

Commit d4252071 ("add barriers to buffer_uptodate and
set_buffer_uptodate") added proper memory barriers to the buffer head
BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date
will be guaranteed to actually see initialized state.

However, that commit didn't _just_ add the memory barrier, it also ended
up dropping the "was it already set" logic that the BUFFER_FNS() macro
had.

That's conceptually the right thing for a generic "this is a memory
barrier" operation, but in the case of the buffer contents, we really
only care about the memory barrier for the _first_ time we set the bit,
in that the only memory ordering protection we need is to avoid anybody
seeing uninitialized memory contents.

Any other access ordering wouldn't be about the BH_Uptodate bit anyway,
and would require some other proper lock (typically BH_Lock or the folio
lock).  A reader that races with somebody invalidating the buffer head
isn't an issue wrt the memory ordering, it's a serialization issue.

Now, you'd think that the buffer head operations don't matter in this
day and age (and I certainly thought so), but apparently some loads
still end up being heavy users of buffer heads.  In particular, the
kernel test robot reported that not having this bit access optimization
in place caused a noticeable direct IO performance regression on ext4:

  fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression

although you presumably need a fast disk and a lot of cores to actually
notice.

Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Fengwei Yin <fengwei.yin@intel.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull EFI fixes from Ard Biesheuvel:
 "A couple of low-priority EFI fixes:

   - prevent the randstruct plugin from re-ordering EFI protocol
     definitions

   - fix a use-after-free in the capsule loader

   - drop unused variable"

* tag 'efi-urgent-for-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: capsule-loader: Fix use-after-free in efi_capsule_write
  efi/x86: libstub: remove unused variable
  efi: libstub: Disable struct randomization

Cong Wang noticed that the previous fix for sch_sfb accessing the queued
skb after enqueueing it to a child qdisc was incomplete: the SFB enqueue
function was also calling qdisc_qstats_backlog_inc() after enqueue, which
reads the pkt len from the skb cb field. Fix this by also storing the skb
len, and using the stored value to increment the backlog after enqueueing.

Fixes: 9efd2329 ("sch_sfb: Don't assume the skb is still around after enqueueing to child")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220905192137.965549-1-toke@toke.dkSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Currently phy link up/down interrupt is enabled using the
LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function,
phy link is determined using the T1_MODE_STAT_REG register comm_ready bit.
comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status.
Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set
first but comm_ready bit takes some time to set based on local and
remote receiver status.
As per the current implementation, interrupt is triggered using link_up
but the comm_ready bit is still cleared in the read_status function. So,
link is always down.  Initially tested with the shared interrupt
mechanism with switch and internal phy which is working, but after
implementing interrupt controller it is not working.
It can fixed either by updating the read_status function to read from
LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for
comm_ready bit. But the validation team recommends the use of comm_ready
for link detection.
This patch fixes by enabling the comm_ready bit for link_up in the
LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in
LAN87xx_INTERRUPT_MASK register.

Fixes: 8a1b415d ("net: phy: added ethtool master-slave configuration support")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220905152750.5079-1-arun.ramadoss@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

A race condition may occur if the user calls close() on another thread
during a write() operation on the device node of the efi capsule.

This is a race condition that occurs between the efi_capsule_write() and
efi_capsule_flush() functions of efi_capsule_fops, which ultimately
results in UAF.

So, the page freeing process is modified to be done in
efi_capsule_release() instead of efi_capsule_flush().

Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

After modifying the QP to the Error state, all RX WR would be completed
with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not
wait for it is done, but destroy the QP and free the link group directly.
So there is a risk that accessing the freed memory in tasklet context.

Here is a crash example:

 BUG: unable to handle page fault for address: ffffffff8f220860
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060
 Oops: 0002 [#1] SMP PTI
 CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S         OE     5.10.0-0607+ #23
 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018
 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0
 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32
 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086
 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000
 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00
 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b
 R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010
 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040
 FS:  0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <IRQ>
  _raw_spin_lock_irqsave+0x30/0x40
  mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib]
  smc_wr_rx_tasklet_fn+0x56/0xa0 [smc]
  tasklet_action_common.isra.21+0x66/0x100
  __do_softirq+0xd5/0x29c
  asm_call_irq_on_stack+0x12/0x20
  </IRQ>
  do_softirq_own_stack+0x37/0x40
  irq_exit_rcu+0x9d/0xa0
  sysvec_call_function_single+0x34/0x80
  asm_sysvec_call_function_single+0x12/0x20

Fixes: bd4ad577 ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR")
Signed-off-by: Yacan Liu <liuyacan@corp.netease.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Even if max hash configured in hw in mtk_ppe_hash_entry is
MTK_PPE_ENTRIES - 1, check theoretical OOB accesses in
mtk_ppe_check_skb routine

Fixes: c4f033d9 ("net: ethernet: mtk_eth_soc: rework hardware flow table management")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

As Eric reported, the 'reason' field is not presented when trace the
kfree_skb event by perf:

$ perf record -e skb:kfree_skb -a sleep 10
$ perf script
  ip_defrag 14605 [021]   221.614303:   skb:kfree_skb:
  skbaddr=0xffff9d2851242700 protocol=34525 location=0xffffffffa39346b1
  reason:

The cause seems to be passing kernel address directly to TP_printk(),
which is not right. As the enum 'skb_drop_reason' is not exported to
user space through TRACE_DEFINE_ENUM(), perf can't get the drop reason
string from the 'reason' field, which is a number.

Therefore, we introduce the macro DEFINE_DROP_REASON(), which is used
to define the trace enum by TRACE_DEFINE_ENUM(). With the help of
DEFINE_DROP_REASON(), now we can remove the auto-generate that we
introduced in the commit ec43908d
("net: skb: use auto-generation to convert skb drop reason to string"),
and define the string array 'drop_reasons'.

Hmmmm...now we come back to the situation that have to maintain drop
reasons in both enum skb_drop_reason and DEFINE_DROP_REASON. But they
are both in dropreason.h, which makes it easier.

After this commit, now the format of kfree_skb is like this:

$ cat /tracing/events/skb/kfree_skb/format
name: kfree_skb
ID: 1524
format:
        field:unsigned short common_type;       offset:0;       size:2; signed:0;
        field:unsigned char common_flags;       offset:2;       size:1; signed:0;
        field:unsigned char common_preempt_count;       offset:3;       size:1; signed:0;
        field:int common_pid;   offset:4;       size:4; signed:1;

        field:void * skbaddr;   offset:8;       size:8; signed:0;
        field:void * location;  offset:16;      size:8; signed:0;
        field:unsigned short protocol;  offset:24;      size:2; signed:0;
        field:enum skb_drop_reason reason;      offset:28;      size:4; signed:0;

print fmt: "skbaddr=%p protocol=%u location=%p reason: %s", REC->skbaddr, REC->protocol, REC->location, __print_symbolic(REC->reason, { 1, "NOT_SPECIFIED" }, { 2, "NO_SOCKET" } ......

Fixes: ec43908d ("net: skb: use auto-generation to convert skb drop reason to string")
Link: https://lore.kernel.org/netdev/CANn89i+bx0ybvE55iMYf5GJM48WwV1HNpdm9Q6t-HaEstqpCSA@mail.gmail.com/Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine.

Fixes: 33fc42de ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

nf_osf_find() incorrectly returns true on mismatch, this leads to
copying uninitialized memory area in nft_osf which can be used to leak
stale kernel stack data to userspace.

Fixes: 22c7652c ("netfilter: nft_osf: Add version option support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

CTCP messages should only be at the start of an IRC message, not
anywhere within it.

While the helper only decodes packes in the ORIGINAL direction, its
possible to make a client send a CTCP message back by empedding one into
a PING request.  As-is, thats enough to make the helper believe that it
saw a CTCP message.

Fixes: 869f37d8 ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port")
Signed-off-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Florian Westphal <fw@strlen.de>

There are different flavors of 'nc' around, this script fails on
my test vm because 'nc' is 'nmap-ncat' which isn't 100% compatible.

Add socat support and use it if available.
Signed-off-by: Florian Westphal <fw@strlen.de>

ct_sip_next_header and ct_sip_get_header return an absolute
value of matchoff, not a shift from current dataoff.
So dataoff should be assigned matchoff, not incremented by it.

This issue can be seen in the scenario when there are multiple
Contact headers and the first one is using a hostname and other headers
use IP addresses. In this case, ct_sip_walk_headers will work as follows:

The first ct_sip_get_header call to will find the first Contact header
but will return -1 as the header uses a hostname. But matchoff will
be changed to the offset of this header. After that, dataoff should be
set to matchoff, so that the next ct_sip_get_header call find the next
Contact header. But instead of assigning dataoff to matchoff, it is
incremented by it, which is not correct, as matchoff is an absolute
value of the offset. So on the next call to the ct_sip_get_header,
dataoff will be incorrect, and the next Contact header may not be
found at all.

Fixes: 05e3ced2 ("[NETFILTER]: nf_conntrack_sip: introduce SIP-URI parsing helper")
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

Vladimir Oltean says:

====================
Fixes for Felix DSA driver calculation of tc-taprio guard bands

This series fixes some bugs which are not quite new, but date from v5.13
when static guard bands were enabled by Michael Walle to prevent
tc-taprio overruns.

The investigation started when Xiaoliang asked privately what is the
expected max SDU for a traffic class when its minimum gate interval is
10 us. The answer, as it turns out, is not an L1 size of 1250 octets,
but 1245 octets, since otherwise, the switch will not consider frames
for egress scheduling, because the static guard band is exactly as large
as the time interval. The switch needs a minimum of 33 ns outside of the
guard band to consider a frame for scheduling, and the reduction of the
max SDU by 5 provides exactly for that.

The fix for that (patch 1/3) is relatively small, but during testing, it
became apparent that cut-through forwarding prevents oversized frame
dropping from working properly. This is solved through the larger patch
2/3. Finally, patch 3/3 fixes one more tc-taprio locking problem found
through code inspection.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The read-modify-write of QSYS_TAG_CONFIG from vsc9959_sched_speed_set()
runs unlocked with respect to the other functions that access it, which
are vsc9959_tas_guard_bands_update(), vsc9959_qos_port_tas_set() and
vsc9959_tas_clock_adjust(). All the others are under ocelot->tas_lock,
so move the vsc9959_sched_speed_set() access under that lock as well, to
resolve the concurrency.

Fixes: 55a515b1 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Experimentally, it looks like when QSYS_QMAXSDU_CFG_7 is set to 605,
frames even way larger than 601 octets are transmitted even though these
should be considered as oversized, according to the documentation, and
dropped.

Since oversized frame dropping depends on frame size, which is only
known at the EOF stage, and therefore not at SOF when cut-through
forwarding begins, it means that the switch cannot take QSYS_QMAXSDU_CFG_*
into consideration for traffic classes that are cut-through.

Since cut-through forwarding has no UAPI to control it, and the driver
enables it based on the mantra "if we can, then why not", the strategy
is to alter vsc9959_cut_through_fwd() to take into consideration which
tc's have oversize frame dropping enabled, and disable cut-through for
them. Then, from vsc9959_tas_guard_bands_update(), we re-trigger the
cut-through determination process.

There are 2 strategies for vsc9959_cut_through_fwd() to determine
whether a tc has oversized dropping enabled or not. One is to keep a bit
mask of traffic classes per port, and the other is to read back from the
hardware registers (a non-zero value of QSYS_QMAXSDU_CFG_* means the
feature is enabled). We choose reading back from registers, because
struct ocelot_port is shared with drivers (ocelot, seville) that don't
support either cut-through nor tc-taprio, and we don't have a felix
specific extension of struct ocelot_port. Furthermore, reading registers
from the Felix hardware is quite cheap, since they are memory-mapped.

Fixes: 55a515b1 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The blamed commit broke tc-taprio schedules such as this one:

tc qdisc replace dev $swp1 root taprio \
        num_tc 8 \
        map 0 1 2 3 4 5 6 7 \
        queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
        base-time 0 \
        sched-entry S 0x7f 990000 \
        sched-entry S 0x80  10000 \
        flags 0x2

because the gate entry for TC 7 (S 0x80 10000 ns) now has a static guard
band added earlier than its 'gate close' event, such that packet
overruns won't occur in the worst case of the largest packet possible.

Since guard bands are statically determined based on the per-tc
QSYS_QMAXSDU_CFG_* with a fallback on the port-based QSYS_PORT_MAX_SDU,
we need to discuss what happens with TC 7 depending on kernel version,
since the driver, prior to commit 55a515b1 ("net: dsa: felix: drop
oversized frames with tc-taprio instead of hanging the port"), did not
touch QSYS_QMAXSDU_CFG_*, and therefore relied on QSYS_PORT_MAX_SDU.

1 (before vsc9959_tas_guard_bands_update): QSYS_PORT_MAX_SDU defaults to
  1518, and at gigabit this introduces a static guard band (independent
  of packet sizes) of 12144 ns, plus QSYS::HSCH_MISC_CFG.FRM_ADJ (bit
  time of 20 octets => 160 ns). But this is larger than the time window
  itself, of 10000 ns. So, the queue system never considers a frame with
  TC 7 as eligible for transmission, since the gate practically never
  opens, and these frames are forever stuck in the TX queues and hang
  the port.

2 (after vsc9959_tas_guard_bands_update): Under the sole goal of
  enabling oversized frame dropping, we make an effort to set
  QSYS_QMAXSDU_CFG_7 to 1230 bytes. But QSYS_QMAXSDU_CFG_7 plays
  one more role, which we did not take into account: per-tc static guard
  band, expressed in L2 byte time (auto-adjusted for FCS and L1 overhead).
  There is a discrepancy between what the driver thinks (that there is
  no guard band, and 100% of min_gate_len[tc] is available for egress
  scheduling) and what the hardware actually does (crops the equivalent
  of QSYS_QMAXSDU_CFG_7 ns out of min_gate_len[tc]). In practice, this
  means that the hardware thinks it has exactly 0 ns for scheduling tc 7.

In both cases, even minimum sized Ethernet frames are stuck on egress
rather than being considered for scheduling on TC 7, even if they would
fit given a proper configuration. Considering the current situation,
with vsc9959_tas_guard_bands_update(), frames between 60 octets and 1230
octets in size are not eligible for oversized dropping (because they are
smaller than QSYS_QMAXSDU_CFG_7), but won't be considered as eligible
for scheduling either, because the min_gate_len[7] (10000 ns) minus the
guard band determined by QSYS_QMAXSDU_CFG_7 (1230 octets * 8 ns per
octet == 9840 ns) minus the guard band auto-added for L1 overhead by
QSYS::HSCH_MISC_CFG.FRM_ADJ (20 octets * 8 ns per octet == 160 octets)
leaves 0 ns for scheduling in the queue system proper.

Investigating the hardware behavior, it becomes apparent that the queue
system needs precisely 33 ns of 'gate open' time in order to consider a
frame as eligible for scheduling to a tc. So the solution to this
problem is to amend vsc9959_tas_guard_bands_update(), by giving the
per-tc guard bands less space by exactly 33 ns, just enough for one
frame to be scheduled in that interval. This allows the queue system to
make forward progress for that port-tc, and prevents it from hanging.

Fixes: 297c4de6 ("net: dsa: felix: re-enable TAS guard band mode")
Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable "has_system_memory" is unused in function
‘adjust_memory_range_protection’, remove it.
Signed-off-by: chen zhang <chenzhang@kylinos.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

When trying to get a file lock on an AFS file, the server may return
UAEAGAIN to indicate that the lock is already held.  This is currently
translated by the default path to -EREMOTEIO.

Translate it instead to -EAGAIN so that we know we can retry it.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey E Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166075761334.3533338.2591992675160918098.stgit@warthog.procyon.org.uk/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM fix from Russell King:
 "Just one fix for now for the AMBA bus code from Isaac Manjarres"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9229/1: amba: Fix use-after-free in amba_read_periphid()

Pull erofs fixes from Gao Xiang:

 - Fix return codes in erofs_fscache_{meta_,}read_folio error paths

 - Fix potential wrong pcluster sizes for later non-4K lclusters

 - Fix in-memory pcluster use-after-free on UP platforms

* tag 'erofs-for-6.0-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix pcluster use-after-free on UP platforms
  erofs: avoid the potentially wrong m_plen for big pcluster
  erofs: fix error return code in erofs_fscache_{meta_,}read_folio

add support for Quectel RM520N which is based on Qualcomm SDX62 chip.

0x0801: DIAG + NMEA + AT + MODEM + RMNET

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0801 Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=RM520N-GL
S:  SerialNumber=384af524
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: jerry.meng <jerry-meng@foxmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

of_device_get_match_data is called on priv->dev before priv->dev is
actually set. Move of_device_get_match_data after priv->dev is correctly
set to fix this kernel panic.

Fixes: 3bb0844e ("net: dsa: qca8k: cache match data to speed up access")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220904215319.13070-1-ansuelsmth@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Fix a bug reported and analyzed by Nagaraj Arankal, where the handling
of a spurious non-SACK RTO could cause a connection to fail to clear
retrans_stamp, causing a later RTO to very prematurely time out the
connection with ETIMEDOUT.

Here is the buggy scenario, expanding upon Nagaraj Arankal's excellent
report:

(*1) Send one data packet on a non-SACK connection

(*2) Because no ACK packet is received, the packet is retransmitted
     and we enter CA_Loss; but this retransmission is spurious.

(*3) The ACK for the original data is received. The transmitted packet
     is acknowledged.  The TCP timestamp is before the retrans_stamp,
     so tcp_may_undo() returns true, and tcp_try_undo_loss() returns
     true without changing state to Open (because tcp_is_sack() is
     false), and tcp_process_loss() returns without calling
     tcp_try_undo_recovery().  Normally after undoing a CA_Loss
     episode, tcp_fastretrans_alert() would see that the connection
     has returned to CA_Open and fall through and call
     tcp_try_to_open(), which would set retrans_stamp to 0.  However,
     for non-SACK connections we hold the connection in CA_Loss, so do
     not fall through to call tcp_try_to_open() and do not set
     retrans_stamp to 0. So retrans_stamp is (erroneously) still
     non-zero.

     At this point the first "retransmission event" has passed and
     been recovered from. Any future retransmission is a completely
     new "event". However, retrans_stamp is erroneously still
     set. (And we are still in CA_Loss, which is correct.)

(*4) After 16 minutes (to correspond with tcp_retries2=15), a new data
     packet is sent. Note: No data is transmitted between (*3) and
     (*4) and we disabled keep alives.

     The socket's timeout SHOULD be calculated from this point in
     time, but instead it's calculated from the prior "event" 16
     minutes ago (step (*2)).

(*5) Because no ACK packet is received, the packet is retransmitted.

(*6) At the time of the 2nd retransmission, the socket returns
     ETIMEDOUT, prematurely, because retrans_stamp is (erroneously)
     too far in the past (set at the time of (*2)).

This commit fixes this bug by ensuring that we reuse in
tcp_try_undo_loss() the same careful logic for non-SACK connections
that we have in tcp_try_undo_recovery(). To avoid duplicating logic,
we factor out that logic into a new
tcp_is_non_sack_preventing_reopen() helper and call that helper from
both undo functions.

Fixes: da34ac76 ("tcp: only undo on partial ACKs in CA_Loss")
Reported-by: Nagaraj Arankal <nagaraj.p.arankal@hpe.com>
Link: https://lore.kernel.org/all/SJ0PR84MB1847BE6C24D274C46A1B9B0EB27A9@SJ0PR84MB1847.NAMPRD84.PROD.OUTLOOK.COM/Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220903121023.866900-1-ncardwell.kernel@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pull ARM SoC fixes from Arnd Bergmann:
 "These are the expected fixes for the SoC tree. I have let the patches
  pile up a little too long, so this is bigger than I would have liked.

   - Minor build fixes for Broadcom STB and NXP i.MX8M SoCs as well\ as
     TEE firmware

   - Updates to the MAINTAINERS file for the PolarFire SoC

   - Minor DT fixes for Renesas White Hawk and Arm Versatile and Juno
     platforms

   - A fix for a missing dependnecy in the NXP DPIO driver

   - Broadcom BCA fixes to the newly added devicetree files

   - Multiple fixes for Microchip AT91 based SoCs, dealing with
     self-refresh timings and regulator settings in DT

   - Several DT fixes for NXP i.MX platforms, dealing with incorrect
     GPIO settings, extraneous nodes, and a wrong clock setting"

* tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
  soc: fsl: select FSL_GUTS driver for DPIO
  ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time
  ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time
  ARM: dts: at91: sama7g5ek: specify proper regulator output ranges
  ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges
  ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges
  ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh
  ARM: at91: pm: fix self-refresh for sama7g5
  soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs
  ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B
  ARM: ixp4xx: fix typos in comments
  arm64: dts: renesas: r8a779g0: Fix HSCIF0 interrupt number
  tee: fix compiler warning in tee_shm_register()
  arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity
  arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity
  arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
  arm64: dts: imx8mm-venice-gw7901: fix port/phy validation
  arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
  soc: imx: gpcv2: Assert reset before ungating clock
  arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x
  ...

During stress testing with CONFIG_SMP disabled, KASAN reports as below:

==================================================================
BUG: KASAN: use-after-free in __mutex_lock+0xe5/0xc30
Read of size 8 at addr ffff8881094223f8 by task stress/7789

CPU: 0 PID: 7789 Comm: stress Not tainted 6.0.0-rc1-00002-g0d53d2e882f9 #3
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
 <TASK>
..
 __mutex_lock+0xe5/0xc30
..
 z_erofs_do_read_page+0x8ce/0x1560
..
 z_erofs_readahead+0x31c/0x580
..
Freed by task 7787
 kasan_save_stack+0x1e/0x40
 kasan_set_track+0x20/0x30
 kasan_set_free_info+0x20/0x40
 __kasan_slab_free+0x10c/0x190
 kmem_cache_free+0xed/0x380
 rcu_core+0x3d5/0xc90
 __do_softirq+0x12d/0x389

Last potentially related work creation:
 kasan_save_stack+0x1e/0x40
 __kasan_record_aux_stack+0x97/0xb0
 call_rcu+0x3d/0x3f0
 erofs_shrink_workstation+0x11f/0x210
 erofs_shrink_scan+0xdc/0x170
 shrink_slab.constprop.0+0x296/0x530
 drop_slab+0x1c/0x70
 drop_caches_sysctl_handler+0x70/0x80
 proc_sys_call_handler+0x20a/0x2f0
 vfs_write+0x555/0x6c0
 ksys_write+0xbe/0x160
 do_syscall_64+0x3b/0x90

The root cause is that erofs_workgroup_unfreeze() doesn't reset to
orig_val thus it causes a race that the pcluster reuses unexpectedly
before freeing.

Since UP platforms are quite rare now, such path becomes unnecessary.
Let's drop such specific-designed path directly instead.

Fixes: 73f5c66d ("staging: erofs: fix `erofs_workgroup_{try_to_freeze, unfreeze}'")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220902045710.109530-1-hsiangkao@linux.alibaba.comSigned-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

Actually, 'compressedlcs' stores compressed block count rather than
lcluster count. Therefore, the number of bits for shifting the count
should be 'LOG_BLOCK_SIZE' rather than 'lclusterbits' although current
lcluster size is 4K.

The value of 'm_plen' will be wrong once we enable the non 4K-sized
lcluster.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220812060150.8510-1-huyue2@coolpad.comSigned-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

If erofs_fscache_alloc_request fail and then goto out, it will return 0.
it should return a negative error code instead of 0.

Fixes: d435d532 ("erofs: change to use asynchronous io for fscache readpage/readahead")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220815034829.3940803-1-sunke32@huawei.comSigned-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix regression preventing ACL packet transmission
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no point to call pcim_iounmap_regions() in the remove function,
this frees a managed resource that would be release by the framework
anyway.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  Fix this up to be much
simpler logic and only create the root debugfs directory once when the
driver is first accessed.  That resolves the memory leak and makes
things more obvious as to what the intent is.

Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: stable <stable@kernel.org>
Fixes: 21da57a2 ("net: mvpp2: add a debugfs interface for the Header Parser")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The SRv6 layer allows defining HMAC data that can later be used to sign IPv6
Segment Routing Headers. This configuration is realised via netlink through
four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and
SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual
length of the SECRET attribute, it is possible to provide invalid combinations
(e.g., secret = "", secretlen = 64). This case is not checked in the code and
with an appropriately crafted netlink message, an out-of-bounds read of up
to 64 bytes (max secret length) can occur past the skb end pointer and into
skb_shared_info:

Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
208		memcpy(hinfo->secret, secret, slen);
(gdb) bt
 #0  seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
 #1  0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600,
    extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>,
    family=<optimized out>) at net/netlink/genetlink.c:731
 #2  0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00,
    family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775
 #3  genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792
 #4  0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>)
    at net/netlink/af_netlink.c:2501
 #5  0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803
 #6  0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000)
    at net/netlink/af_netlink.c:1319
 #7  netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>)
    at net/netlink/af_netlink.c:1345
 #8  0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921
...
(gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end
$1 = 0xffff88800b1b76c0
(gdb) p/x secret
$2 = 0xffff88800b1b76c0
(gdb) p slen
$3 = 64 '@'

The OOB data can then be read back from userspace by dumping HMAC state. This
commit fixes this by ensuring SECRETLEN cannot exceed the actual length of
SECRET.
Reported-by: Lucas Leong <wmliang.tw@gmail.com>
Tested: verified that EINVAL is correctly returned when secretlen > len(secret)
Fixes: 4f4853dc ("ipv6: sr: implement API to control SR HMAC structure")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hangbin Liu says:

====================
bonding: fix lladdr finding and confirmation

This patch set fixed 3 issues when setting lladdr as bonding IPv6 target.
Please see each patch for the details.

v2: separate the patch to 3 parts
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The unsolicited NA message with all-nodes multicast dest address should
be valid, as this also means the link could reach the target.

Also rename bond_validate_ns() to bond_validate_na().
Reported-by: LiLiang <liali@redhat.com>
Fixes: 5e1eeef6 ("bonding: NS target should accept link local address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a link is enslave to bond, it need to set the interface down first.
This makes the slave remove mac multicast address 33:33:00:00:00:01(The
IPv6 multicast address ff02::1 is kept even when the interface down). When
bond set the slave up, ipv6_mc_up() was not called due to commit c2edacf8
("bonding / ipv6: no addrconf for slaves separately from master").

This is not an issue before we adding the lladdr target feature for bonding,
as the mac multicast address will be added back when bond interface up and
join group ff02::1.

But after adding lladdr target feature for bonding. When user set a lladdr
target, the unsolicited NA message with all-nodes multicast dest will be
dropped as the slave interface never add 33:33:00:00:00:01 back.

Fix this by calling ipv6_mc_up() to add 33:33:00:00:00:01 back when
the slave interface up.
Reported-by: LiLiang <liali@redhat.com>
Fixes: 5e1eeef6 ("bonding: NS target should accept link local address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>