Pull arm64 fix from Catalin Marinas:
 "Fix a regression where the arm64 KPTI ends up enabled even on systems
  that don't need it"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Avoid enabling KPTI unnecessarily

Pull iommu fixes from Joerg Roedel:

 - Fix race conditions in device probe path

 - Handle ERR_PTR() returns in __iommu_domain_alloc() path

 - Update MAINTAINERS entry for Qualcom IOMMUs

 - Printk argument fix in device tree specific code

 - Several Intel VT-d fixes from Lu Baolu:
     - Do not support enforcing cache coherency for non-empty domains
     - Avoid devTLB invalidation if iommu is off
     - Disable PCI ATS in legacy passthrough mode
     - Support non-PCI devices when clearing context
     - Fix incorrect cache invalidation for mm notification
     - Add MTL to quirk list to skip TE disabling
     - Set variable intel_dirty_ops to static

* tag 'iommu-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Fix printk arg in of_iommu_get_resv_regions()
  iommu/vt-d: Set variable intel_dirty_ops to static
  iommu/vt-d: Fix incorrect cache invalidation for mm notification
  iommu/vt-d: Add MTL to quirk list to skip TE disabling
  iommu/vt-d: Make context clearing consistent with context mapping
  iommu/vt-d: Disable PCI ATS in legacy passthrough mode
  iommu/vt-d: Omit devTLB invalidation requests when TES=0
  iommu/vt-d: Support enforce_cache_coherency only for empty domains
  iommu: Avoid more races around device probe
  MAINTAINERS: list all Qualcomm IOMMU drivers in the QUALCOMM IOMMU entry
  iommu: Flow ERR_PTR out from __iommu_domain_alloc()

Pull sound fixes from Takashi Iwai:
 "No surprise here, including only a collection of HD-audio
  device-specific small fixes"

* tag 'sound-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda: Disable power-save on KONTRON SinglePC
  ALSA: hda/realtek: Add supported ALC257 for ChromeOS
  ALSA: hda/realtek: Headset Mic VREF to 100%
  ALSA: hda: intel-nhlt: Ignore vbps when looking for DMIC 32 bps format
  ALSA: hda: cs35l56: Enable low-power hibernation mode on SPI
  ALSA: cs35l41: Fix for old systems which do not support command
  ALSA: hda: cs35l41: Remove unnecessary boolean state variable firmware_running
  ALSA: hda - Fix speaker and headset mic pin config for CHUWI CoreBook XPro

Pull drm fixes from Dave Airlie:
 "Weekly fixes, mostly amdgpu fixes with a scattering of nouveau, i915,
  and a couple of reverts. Hopefully it will quieten down in coming
  weeks.

  drm:
   - Revert unexport of prime helpers for fd/handle conversion

  dma_resv:
   - Do not double add fences in dma_resv_add_fence.

  gpuvm:
   - Fix GPUVM license identifier.

  i915:
   - Mark internal GSC engine with reserved uabi class
   - Take VGA converters into account in eDP probe
   - Fix intel_pre_plane_updates() call to ensure workarounds get applied

  panel:
   - Revert panel fixes as they require exporting device_is_dependent.

  nouveau:
   - fix oversized allocations in new vm path
   - fix zero-length array
   - remove a stray lock

  nt36523:
   - Fix error check for nt36523.

  amdgpu:
   - DMUB fix
   - DCN 3.5 fixes
   - XGMI fix
   - DCN 3.2 fixes
   - Vangogh suspend fix
   - NBIO 7.9 fix
   - GFX11 golden register fix
   - Backlight fix
   - NBIO 7.11 fix
   - IB test overflow fix
   - DCN 3.1.4 fixes
   - fix a runtime pm ref count
   - Retimer fix
   - ABM fix
   - DCN 3.1.5 fix
   - Fix AGP addressing
   - Fix possible memory leak in SMU error path
   - Make sure PME is enabled in D3
   - Fix possible NULL pointer dereference in debugfs
   - EEPROM fix
   - GC 9.4.3 fix

  amdkfd:
   - IP version check fix
   - Fix memory leak in pqm_uninit()"

* tag 'drm-fixes-2023-12-01' of git://anongit.freedesktop.org/drm/drm: (53 commits)
  Revert "drm/prime: Unexport helpers for fd/handle conversion"
  drm/amdgpu: Use another offset for GC 9.4.3 remap
  drm/amd/display: Fix some HostVM parameters in DML
  drm/amdkfd: Free gang_ctx_bo and wptr_bo in pqm_uninit
  drm/amdgpu: Update EEPROM I2C address for smu v13_0_0
  drm/amd/display: Allow DTBCLK disable for DCN35
  drm/amdgpu: Fix cat debugfs amdgpu_regs_didt causes kernel null pointer
  drm/amd: Enable PCIe PME from D3
  drm/amd/pm: fix a memleak in aldebaran_tables_init
  drm/amdgpu: fix AGP addressing when GART is not at 0
  drm/amd/display: update dcn315 lpddr pstate latency
  drm/amd/display: fix ABM disablement
  drm/amd/display: Fix black screen on video playback with embedded panel
  drm/amd/display: Fix conversions between bytes and KB
  drm/amdkfd: Use common function for IP version check
  drm/amd/display: Remove config update
  drm/amd/display: Update DCN35 clock table policy
  drm/amd/display: force toggle rate wa for first link training for a retimer
  drm/amdgpu: correct the amdgpu runtime dereference usage count
  drm/amd/display: Update min Z8 residency time to 2100 for DCN314
  ...

Pull io_uring fixes from Jens Axboe:

 - Fix an issue with discontig page checking for IORING_SETUP_NO_MMAP

 - Fix an issue with not allowing IORING_SETUP_NO_MMAP also disallowing
   mmap'ed buffer rings

 - Fix an issue with deferred release of memory mapped pages

 - Fix a lockdep issue with IORING_SETUP_NO_MMAP

 - Use fget/fput consistently, even from our sync system calls. No real
   issue here, but if we were ever to allow closing io_uring descriptors
   it would be required. Let's play it safe and just use the full ref
   counted versions upfront. Most uses of io_uring are threaded anyway,
   and hence already doing the full version underneath.

* tag 'io_uring-6.7-2023-11-30' of git://git.kernel.dk/linux:
  io_uring: use fget/fput consistently
  io_uring: free io_buffer_list entries via RCU
  io_uring/kbuf: prune deferred locked cache when tearing down
  io_uring/kbuf: recycle freed mapped buffer ring entries
  io_uring/kbuf: defer release of mapped buffer rings
  io_uring: enable io_mem_alloc/free to be used in other parts
  io_uring: don't guard IORING_OFF_PBUF_RING with SETUP_NO_MMAP
  io_uring: don't allow discontig pages for IORING_SETUP_NO_MMAP

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
     - Invalid namespace identification error handling (Marizio Ewan,
       Keith)
     - Fabrics keep-alive tuning (Mark)

 - Fix for a bad error check regression in bcache (Markus)

 - Fix for a performance regression with O_DIRECT (Ming)

 - Fix for a flush related deadlock (Ming)

 - Make the read-only warn on per-partition (Yu)

* tag 'block-6.7-2023-12-01' of git://git.kernel.dk/linux:
  nvme-core: check for too small lba shift
  blk-mq: don't count completed flush data request as inflight in case of quiesce
  block: Document the role of the two attribute groups
  block: warn once for each partition in bio_check_ro()
  block: move .bd_inode into 1st cacheline of block_device
  nvme: check for valid nvme_identify_ns() before using it
  nvme-core: fix a memory leak in nvme_ns_info_from_identify()
  nvme: fine-tune sending of first keep-alive
  bcache: revert replacing IS_ERR_OR_NULL with IS_ERR

Merge tag 'dm-6.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM verity target's FEC support to always initialize IO before it
   frees it. Also fix alignment of struct dm_verity_fec_io within the
   per-bio-data

 - Fix DM verity target to not FEC failed readahead IO

 - Update DM flakey target to use MAX_ORDER rather than MAX_ORDER - 1

* tag 'dm-6.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm-flakey: start allocating with MAX_ORDER
  dm-verity: align struct dm_verity_fec_io properly
  dm verity: don't perform FEC for failed readahead IO
  dm verity: initialize fec io before freeing it

Pull SCSI fixes from James Bottomley:
 "Three small fixes, one in drivers.

  The core changes are to the internal representation of flags in
  scsi_devices which removes space wasting bools in favour of single bit
  flags and to add a flag to force a runtime resume which is used by ATA
  devices"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Fix system start for ATA devices
  scsi: Change SCSI device boolean fields to single bit flags
  scsi: ufs: core: Clear cmd if abort succeeds in MCQ mode

Pull ext2 fix from Jan Kara:
 "Fix an ext2 bug introduced by changes in ext2 & iomap stepping on each
  other toes (apparently ext2 driver does not get much testing in
  linux-next)"

* tag 'fs_for_v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: Fix ki_pos update for DIO buffered-io fallback case

Pull more bcachefs bugfixes from Kent Overstreet:

 - bcache & bcachefs were broken with CFI enabled; patch for closures to
   fix type punning

 - mark erasure coding as extra-experimental; there are incompatible
   disk space accounting changes coming for erasure coding, and I'm
   still seeing checksum errors in some tests

 - several fixes for durability-related issues (durability is a device
   specific setting where we can tell bcachefs that data on a given
   device should be counted as replicated x times)

 - a fix for a rare livelock when a btree node merge then updates a
   parent node that is almost full

 - fix a race in the device removal path, where dropping a pointer in a
   btree node to a device would be clobbered by an in flight btree write
   updating the btree node key on completion

 - fix one SRCU lock hold time warning in the btree gc code - ther's
   still a bunch more of these to fix

 - fix a rare race where we'd start copygc before initializing the "are
   we rw" percpu refcount; copygc would think we were already ro and die
   immediately

* tag 'bcachefs-2023-11-29' of https://evilpiepirate.org/git/bcachefs: (23 commits)
  bcachefs: Extra kthread_should_stop() calls for copygc
  bcachefs: Convert gc_alloc_start() to for_each_btree_key2()
  bcachefs: Fix race between btree writes and metadata drop
  bcachefs: move journal seq assertion
  bcachefs: -EROFS doesn't count as move_extent_start_fail
  bcachefs: trace_move_extent_start_fail() now includes errcode
  bcachefs: Fix split_race livelock
  bcachefs: Fix bucket data type for stripe buckets
  bcachefs: Add missing validation for jset_entry_data_usage
  bcachefs: Fix zstd compress workspace size
  bcachefs: bpos is misaligned on big endian
  bcachefs: Fix ec + durability calculation
  bcachefs: Data update path won't accidentaly grow replicas
  bcachefs: deallocate_extra_replicas()
  bcachefs: Proper refcounting for journal_keys
  bcachefs: preserve device path as device name
  bcachefs: Fix an endianness conversion
  bcachefs: Start gc, copygc, rebalance threads after initing writes ref
  bcachefs: Don't stop copygc thread on device resize
  bcachefs: Make sure bch2_move_ratelimit() also waits for move_ops
  ...

Pull NVMe fixes from Keith:

"nvme fixes for Linux 6.7

 - Invalid namespace identification error handling (Marizio Ewan, Keith)
 - Fabrics keep-alive tuning (Mark)"

* tag 'nvme-6.7-2023-12-01' of git://git.infradead.org/nvme:
  nvme-core: check for too small lba shift
  nvme: check for valid nvme_identify_ns() before using it
  nvme-core: fix a memory leak in nvme_ns_info_from_identify()
  nvme: fine-tune sending of first keep-alive

The block layer doesn't support logical block sizes smaller than 512
bytes. The nvme spec doesn't support that small either, but the driver
isn't checking to make sure the device responded with usable data.
Failing to catch this will result in a kernel bug, either from a
division by zero when stacking, or a zero length bio.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>

Request queue quiesce may interrupt flush sequence, and the original request
may have been marked as COMPLETE, but can't get finished because of
queue quiesce.

This way is fine from driver viewpoint, because flush sequence is block
layer concept, and it isn't related with driver.

However, driver(such as dm-rq) can call blk_mq_queue_inflight() to count &
drain inflight requests, then the wait & drain never gets done because
the completed & not-finished flush request is counted as inflight.

Fix this issue by not counting completed flush data request as inflight in
case of quiesce.

Cc: Mike Snitzer <snitzer@kernel.org>
Cc: David Jeffery <djeffery@redhat.com>
Cc: John Pittman <jpittman@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231201085605.577730-1-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

The variable phys is defined as (struct resource *) which aligns with
the printk format specifier %pr. Taking the address of it results in a
value of type (struct resource **) which is incompatible with the format
specifier %pr. Therefore, remove the address of operator (&).

Fixes: a5bf3cfc ("iommu: Implement of_iommu_get_resv_regions()")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20231108062226.928985-1-danielmentz@google.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Pull hardening fixes from Kees Cook:

 - struct_group: propagate attributes to top-level union (Dmitry
   Antipov)

 - gcc-plugins: randstruct: Update code comment in relayout_struct
   (Gustavo A. R. Silva)

 - MAINTAINERS: refresh LLVM support (Nick Desaulniers)

* tag 'hardening-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: randstruct: Update code comment in relayout_struct()
  uapi: propagate __struct_group() attributes to the container union
  MAINTAINERS: refresh LLVM support

Merge tag 'linux_kselftest-kunit-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit fixes from Shuah Khan:
 "Three fixes to warnings and run-time test behavior. With these fixes,
  test suite counter will be reset correctly before running tests, kunit
  will warn if tests are too slow, and eliminate warning when kfree() as
  an action"

* tag 'linux_kselftest-kunit-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: test: Avoid cast warning when adding kfree() as an action
  kunit: Reset suite counter right before running tests
  kunit: Warn if tests are slow

Merge tag 'amd-drm-fixes-6.7-2023-11-30' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.7-2023-11-30:

amdgpu:
- DMUB fix
- DCN 3.5 fixes
- XGMI fix
- DCN 3.2 fixes
- Vangogh suspend fix
- NBIO 7.9 fix
- GFX11 golden register fix
- Backlight fix
- NBIO 7.11 fix
- IB test overflow fix
- DCN 3.1.4 fixes
- fix a runtime pm ref count
- Retimer fix
- ABM fix
- DCN 3.1.5 fix
- Fix AGP addressing
- Fix possible memory leak in SMU error path
- Make sure PME is enabled in D3
- Fix possible NULL pointer dereference in debugfs
- EEPROM fix
- GC 9.4.3 fix

amdkfd:
- IP version check fix
- Fix memory leak in pqm_uninit()

drm:
- Revert unexport of prime helpers for fd/handle conversion
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130213135.5083-1-alexander.deucher@amd.com

Merge tag 'perf-tools-fixes-for-v6.7-1-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
 "Assorted build fixes including:

   - fix compile errors in printf() with u64 on 32-bit systesm

   - sync kernel headers to the tool copies

   - update arm64 sysreg generation for tarballs

   - disable compile warnings on __packed attribute"

* tag 'perf-tools-fixes-for-v6.7-1-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  tools: Disable __packed attribute compiler warning due to -Werror=attributes
  perf build: Ensure sysreg-defs Makefile respects output dir
  tools perf: Add arm64 sysreg files to MANIFEST
  tools/perf: Update tools's copy of mips syscall table
  tools/perf: Update tools's copy of s390 syscall table
  tools/perf: Update tools's copy of powerpc syscall table
  tools/perf: Update tools's copy of x86 syscall table
  tools headers: Update tools's copy of s390/asm headers
  tools headers: Update tools's copy of arm64/asm headers
  tools headers: Update tools's copy of x86/asm headers
  tools headers: Update tools's copy of socket.h header
  tools headers UAPI: Update tools's copy of unistd.h header
  tools headers UAPI: Update tools's copy of vhost.h header
  tools headers UAPI: Update tools's copy of mount.h header
  tools headers UAPI: Update tools's copy of kvm.h header
  tools headers UAPI: Update tools's copy of fscrypt.h header
  tools headers UAPI: Update tools's copy of drm headers
  perf lock contention: Fix a build error on 32-bit
  perf kwork: Fix a build error on 32-bit

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and wifi.

  Current release - regressions:

   - neighbour: fix __randomize_layout crash in struct neighbour

   - r8169: fix deadlock on RTL8125 in jumbo mtu mode

  Previous releases - regressions:

   - wifi:
       - mac80211: fix warning at station removal time
       - cfg80211: fix CQM for non-range use

   - tools: ynl-gen: fix unexpected response handling

   - octeontx2-af: fix possible buffer overflow

   - dpaa2: recycle the RX buffer only after all processing done

   - rswitch: fix missing dev_kfree_skb_any() in error path

  Previous releases - always broken:

   - ipv4: fix uaf issue when receiving igmp query packet

   - wifi: mac80211: fix debugfs deadlock at device removal time

   - bpf:
       - sockmap: af_unix stream sockets need to hold ref for pair sock
       - netdevsim: don't accept device bound programs

   - selftests: fix a char signedness issue

   - dsa: mv88e6xxx: fix marvell 6350 probe crash

   - octeontx2-pf: restore TC ingress police rules when interface is up

   - wangxun: fix memory leak on msix entry

   - ravb: keep reverse order of operations in ravb_remove()"

* tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
  net: ravb: Keep reverse order of operations in ravb_remove()
  net: ravb: Stop DMA in case of failures on ravb_open()
  net: ravb: Start TX queues after HW initialization succeeded
  net: ravb: Make write access to CXR35 first before accessing other EMAC registers
  net: ravb: Use pm_runtime_resume_and_get()
  net: ravb: Check return value of reset_control_deassert()
  net: libwx: fix memory leak on msix entry
  ice: Fix VF Reset paths when interface in a failed over aggregate
  bpf, sockmap: Add af_unix test with both sockets in map
  bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
  tools: ynl-gen: always construct struct ynl_req_state
  ethtool: don't propagate EOPNOTSUPP from dumps
  ravb: Fix races between ravb_tx_timeout_work() and net related ops
  r8169: prevent potential deadlock in rtl8169_close
  r8169: fix deadlock on RTL8125 in jumbo mtu mode
  neighbour: Fix __randomize_layout crash in struct neighbour
  octeontx2-pf: Restore TC ingress police rules when interface is up
  octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64
  net: stmmac: xgmac: Disable FPE MMC interrupts
  octeontx2-af: Fix possible buffer overflow
  ...

Pull pmdomain fix from Ulf Hansson:

 - Avoid polling for the scmi_perf_domain on arm

* tag 'pmdomain-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: arm: Avoid polling for scmi_perf_domain

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix CQE error recovery path

  MMC host:
   - cqhci: Fix CQE error recovery path
   - sdhci-pci-gli: Fix initialization of LPM
   - sdhci-sprd: Fix enabling/disabling of the vqmmc regulator"

* tag 'mmc-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled
  mmc: sdhci-pci-gli: Disable LPM during initialization
  mmc: cqhci: Fix task clearing in CQE error recovery
  mmc: cqhci: Warn of halt or task clear failure
  mmc: block: Retry commands in CQE error recovery
  mmc: block: Be sure to wait while busy in CQE error recovery
  mmc: cqhci: Increase recovery halt timeout
  mmc: block: Do not lose cache flush during CQE error recovery

Pull LED fix from Lee Jones:

 - Remove duplicate sysfs entry 'color' from LEDs class

* tag 'leds-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
  leds: class: Don't expose color sysfs entry

Pull EFI fix from Ard Biesheuvel:

 - Fix for EFI unaccepted memory handling

* tag 'efi-urgent-for-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/unaccepted: Fix off-by-one when checking for overlapping ranges

Fixes for v6.7-rc4:
- Revert panel fixes as they require exporting device_is_dependent.
- Do not double add fences in dma_resv_add_fence.
- Fix GPUVM license identifier.
- Assorted nouveau fixes.
- Fix error check for nt36523.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/561f807e-f9d3-43c1-80d3-8b41ba83c9ec@linux.intel.com

Merge tag 'drm-intel-fixes-2023-11-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v6.7-rc4:
- Mark internal GSC engine with reserved uabi class
- Take VGA converters into account in eDP probe
- Fix intel_pre_plane_updates() call to ensure workarounds get applied
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87msuv479z.fsf@intel.com

This reverts commit 71a7974a.

These helper functions are needed for KFD to export and import DMABufs
the right way without duplicating the tracking of DMABufs associated with
GEM objects while ensuring that move notifier callbacks are working as
intended.

CC: Christian König <christian.koenig@amd.com>
CC: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Commit 42c5a3b0 refactored the KPTI init code in a way that results
in the use of non-global kernel mappings even on systems that have no
need for it, and even when KPTI has been disabled explicitly via the
command line.

Ensure that this only happens when we have decided (based on the
detected system-wide CPU features) that KPTI should be enabled.

Fixes: 42c5a3b0 ("arm64: Split kpti_install_ng_mappings()")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231127120049.2258650-6-ardb@google.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

It's been reported that the runtime PM on KONTRON SinglePC (PCI SSID
1734:1232) caused a stall of playback after a bunch of invocations.
(FWIW, this looks like an timing issue, and the stall happens rather
on the controller side.)

As a workaround, disable the default power-save on this platform.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231130151321.9813-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Claudiu Beznea says:

====================
net: ravb: Fixes for the ravb driver

This series adds some fixes for ravb driver. Patches in this series
were initilly part of series at [1].

Changes in v2:
- in description of patch 1/6 documented the addition of
  out_free_netdev goto label
- collected tags
- s/out_runtime_disable/out_rpm_disable in patch 2/6
- fixed typos in description of patch 6/6

Changes since [1]:
- addressed review comments
- added patch 6/6

[1] https://lore.kernel.org/all/20231120084606.4083194-1-claudiu.beznea.uj@bp.renesas.com/
====================

Link: https://lore.kernel.org/r/20231128080439.852467-1-claudiu.beznea.uj@bp.renesas.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet
MACs and PHYs it has been discovered that doing unbind/bind for ravb
driver in a loop leads to wrong speed and duplex for Ethernet links and
broken connectivity (the connectivity cannot be restored even with
bringing interface down/up). Before doing unbind/bind the Ethernet
interfaces were configured though systemd. The sh instructions used to
do unbind/bind were:

$ cd /sys/bus/platform/drivers/ravb/
$ while :; do echo 11c30000.ethernet > unbind ; \
  echo 11c30000.ethernet > bind; done

It has been discovered that there is a race b/w IOCTLs initialized by
systemd at the response of success binding and the
"ravb_write(ndev, CCC_OPC_RESET, CCC)" call in ravb_remove() as
follows:

1/ as a result of bind success the user space open/configures the
   interfaces tough an IOCTL; the following stack trace has been
   identified on RZ/G3S:

Call trace:
dump_backtrace+0x9c/0x100
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x28
ravb_open+0x70/0xa58
__dev_open+0xf4/0x1e8
__dev_change_flags+0x198/0x218
dev_change_flags+0x2c/0x80
devinet_ioctl+0x640/0x708
inet_ioctl+0x1e4/0x200
sock_do_ioctl+0x50/0x108
sock_ioctl+0x240/0x358
__arm64_sys_ioctl+0xb0/0x100
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0xb8
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x190/0x198

2/ this call may execute concurrently with ravb_remove() as the
   unbind/bind operation was executed in a loop
3/ if the operation mode is changed to RESET (through
   ravb_write(ndev, CCC_OPC_RESET, CCC) call in ravb_remove())
   while the above ravb_open() is in progress it may lead to MAC
   (or PHY, or MAC-PHY connection, the right point hasn't been identified
   at the moment) to be broken, thus the Ethernet connectivity fails to
   restore.

The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC))
after unregister_netdev() to avoid resetting the controller while the
netdev interface is still registered.

To avoid future issues in ravb_remove(), the patch follows the proper order
of operations in ravb_remove(): reverse order compared with ravb_probe().
This avoids described races as the IOCTLs as well as unregister_netdev()
(called now at the beginning of ravb_remove()) calls rtnl_lock() before
continuing and IOCTLs check (though devinet_ioctl()) if device is still
registered just after taking the lock:

int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr)
{
	// ...

        rtnl_lock();

        ret = -ENODEV;
        dev = __dev_get_by_name(net, ifr->ifr_name);
        if (!dev)
                goto done;

	// ...
done:
        rtnl_unlock();
out:
        return ret;
}

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In case ravb_phy_start() returns with error the settings applied in
ravb_dmac_init() are not reverted (e.g. config mode). For this call
ravb_stop_dma() on failure path of ravb_open().

Fixes: a0d2f206 ("Renesas Ethernet AVB PTP clock driver")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ravb_phy_start() may fail. If that happens, the TX queues will remain
started. Thus, move the netif_tx_start_all_queues() after PHY is
successfully initialized.

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the
description of CXR35 register (chapter "PHY interface select register
(CXR35)"): "After release reset, make write-access to this register before
making write-access to other registers (except MDIOMOD). Even if not need
to change the value of this register, make write-access to this register
at least one time. Because RGMII/MII MODE is recognized by accessing this
register".

The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S,
RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC
register that is to be configured.

Note [A] from chapter "PHY interface select register (CXR35)" specifies
the following:
[A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII
in APB Clock 100 MHz.
(1) To use RGMII interface, Set ‘H’03E8_0000’ to this register.
(2) To use MII interface, Set ‘H’03E8_0002’ to this register.

Take into account these indication.

Fixes: 1089877a ("ravb: Add RZ/G2L MII interface support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

pm_runtime_get_sync() may return an error. In case it returns with an error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

reset_control_deassert() could return an error. Some devices cannot work
if reset signal de-assert operation fails. To avoid this check the return
code of reset_control_deassert() in ravb_probe() and take proper action.

Along with it, the free_netdev() call from the error path was moved after
reset_control_assert() on its own label (out_free_netdev) to free
netdev in case reset_control_deassert() fails.

Fixes: 0d13a1a4 ("ravb: Add reset support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Since pci_free_irq_vectors() set pdev->msix_enabled as 0 in the
calling of pci_msix_shutdown(), wx->msix_entries is never freed.
Reordering the lines to fix the memory leak.

Cc: stable@vger.kernel.org
Fixes: 3f703186 ("net: libwx: Add irq flow functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20231128095928.1083292-1-jiawenwu@trustnetic.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is an error when an interface has the following conditions:
- PF is in an aggregate (bond)
- PF has VFs created on it
- bond is in a state where it is failed-over to the secondary interface
- A VF reset is issued on one or more of those VFs

The issue is generated by the originating PF trying to rebuild or
reconfigure the VF resources.  Since the bond is failed over to the
secondary interface the queue contexts are in a modified state.

To fix this issue, have the originating interface reclaim its resources
prior to the tear-down and rebuild or reconfigure.  Then after the process
is complete, move the resources back to the currently active interface.

There are multiple paths that can be used depending on what triggered the
event, so create a helper function to move the queues and use paired calls
to the helper (back to origin, process, then move back to active interface)
under the same lag_mutex lock.

Fixes: 1e0f9881 ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20231127212340.1137657-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Johannes Berg says:

====================
wireless fixes:
 - debugfs had a deadlock (removal vs. use of files),
   fixes going through wireless ACKed by Greg
 - support for HT STAs on 320 MHz channels, even if it's
   not clear that should ever happen (that's 6 GHz), best
   not to WARN()
 - fix for the previous CQM fix that broke most cases
 - various wiphy locking fixes
 - various small driver fixes

* tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: mac80211: use wiphy locked debugfs for sdata/link
  wifi: mac80211: use wiphy locked debugfs helpers for agg_status
  wifi: cfg80211: add locked debugfs wrappers
  debugfs: add API to allow debugfs operations cancellation
  debugfs: annotate debugfs handlers vs. removal with lockdep
  debugfs: fix automount d_fsdata usage
  wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap
  wifi: avoid offset calculation on NULL pointer
  wifi: cfg80211: hold wiphy mutex for send_interface
  wifi: cfg80211: lock wiphy mutex for rfkill poll
  wifi: cfg80211: fix CQM for non-range use
  wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush
  wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta()
  wifi: mt76: mt7925: fix typo in mt7925_init_he_caps
  wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config
====================

Link: https://lore.kernel.org/r/20231129150809.31083-3-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2023-11-30

We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 10 files changed, 66 insertions(+), 15 deletions(-).

The main changes are:

1) Fix AF_UNIX splat from use after free in BPF sockmap,
   from John Fastabend.

2) Fix a syzkaller splat in netdevsim by properly handling offloaded
   programs (and not device-bound ones), from Stanislav Fomichev.

3) Fix bpf_mem_cache_alloc_flags() to initialize the allocation hint,
   from Hou Tao.

4) Fix netkit by rejecting IFLA_NETKIT_PEER_INFO in changelink,
   from Daniel Borkmann.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, sockmap: Add af_unix test with both sockets in map
  bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
  netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link
  bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags()
  netdevsim: Don't accept device bound programs
====================

Link: https://lore.kernel.org/r/20231129234916.16128-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This adds a test where both pairs of a af_unix paired socket are put into a
BPF map. This ensures that when we tear down the af_unix pair we don't have
any issues on sockmap side with ordering and reference counting.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20231129012557.95371-3-john.fastabend@gmail.com