Since mlx4 NIC are used on PowerPC with 64K pages, we need to adapt
MLX4_EN_ALLOC_PREFER_ORDER definition.

Otherwise, a fragment sitting in an out of order TCP queue can hold
0.5 Mbytes and it is a serious OOM risk.

Fixes: 51151a16 ("mlx4: allow order-0 memory allocations in RX path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2017-02-18

This series contains updates to i40e and i40evf only.

Alan fixes a bug in which the driver is unable to exit overflow
promiscuous mode after having added "too many" mac filters.  Ractored
the '%*ph' printk format specifier to instead use the print_hex_dump().

Josh adds enabling multicast magic packet wakeup by adding calls to
the mac_address_write admin q function during power down to update the
PRTPM_SAH/SAL registers with the MC_MAG_EN bit.

Jake remove a duplicate call i40e_update_link_info(), since it does not
need to call it twice.  Fixes and issue where we calculating the wrong
switch id on big endian platforms.  Avoided sparse warning, by doing a
typecast to ensure the value is of the type expected by
csum_replace_by_diff().

Mitch fixes a memory leak by freeing resources during i40e_remove().
Cleans up some code confusion by adding a proper code comment.

Carolyn fixes a bug introduced with the addition of the per queue ITR
feature support in ethtool.  Cleans up a duplicate device id from the
PCI table.

Harshitha fixes a bug which causes the 'Link Detected' field in
ethtool to report the correct link status.

Benjamin Poirier from SuSE applies a fix ec13ee80 ("virtio_net:
 invoke softirqs after __napi_schedule") to i40e driver as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Resizing currently drops consumer lock.  This can cause entries to be
reordered, which isn't good in itself.  More importantly, consumer can
detect a false ring empty condition and block forever.

Further, nesting of consumer within producer lock is problematic for
tun, since it produces entries in a BH, which causes a lock order
reversal:

       CPU0                    CPU1
       ----                    ----
  consume:
  lock(&(&r->consumer_lock)->rlock);
                               resize:
                               local_irq_disable();
                               lock(&(&r->producer_lock)->rlock);
                               lock(&(&r->consumer_lock)->rlock);
  <Interrupt>
  produce:
  lock(&(&r->producer_lock)->rlock);

To fix, nest producer lock within consumer lock during resize,
and keep consumer lock during the whole swap operation.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

trivial fix to spelling mistake, en_tsu_err_exeption should
be en_tsu_err_exception
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: support MSG_MORE flag when sending msg

This patch is to add support for MSG_MORE on sctp. Patch 1/2 is an
improvement ahead of patch 2/2 to solve the close block problem
mentioned in https://patchwork.ozlabs.org/patch/372404/.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add support for MSG_MORE on sctp.

It adds force_delay in sctp_datamsg to save MSG_MORE, and sets it after
creating datamsg according to the send flag. sctp_packet_can_append_data
then uses it to decide if the chunks of this msg will be sent at once or
delay it.

Note that unlike [1], this patch saves MSG_MORE in datamsg, instead of
in assoc. As sctp enqueues the chunks first, then dequeue them one by
one. If it's saved in assoc,the current msg's send flag (MSG_MORE) may
affect other chunks' bundling.

Since last patch, sctp flush out queue once assoc state falls into
SHUTDOWN_PENDING, the close block problem mentioned in [1] has been
solved as well.

[1] https://patchwork.ozlabs.org/patch/372404/Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to flush out queue when assoc state falls into
SHUTDOWN_PENDING if there are still chunks in it, so that the
data can be sent out as soon as possible before sending SHUTDOWN
chunk.

When sctp supports MSG_MORE flag in next patch, this improvement
can also solve the problem that the chunks with MSG_MORE flag
may be stuck in queue when closing an assoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to clarify what the module actually does, and how to use it,
let's add some basic documentation to the kernel tree, together with
pointers to related specs and projects.
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Acked-by: Andreas Schultz <aschultz@tpip.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both functions aq_ring_rx_deinit() and aq_ring_tx_clean() are almost
identical aside from an additional check in the latter.
Move that check from the function into its caller and replace
aq_ring_rx_deinit() with aq_ring_rx_deinit().

By doing this also adjust the functions return value from int to void
since it can never fail.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Tested-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The check in ena_remove() for the pci driver data not being NULL is not
needed, since it is always set in the probe() function. Remove the
superfluous check.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Connlabels are included in conntrack netlink event messages only if
the IPCT_LABEL bit is set in the event cache (see
ctnetlink_conntrack_event()).  Set it after initializing labels for a
new connection.

Found upon further system testing, where it was noticed that labels
were missing from the conntrack events.

Fixes: 193e3096 ("openvswitch: Do not trigger events for unconfirmed connections.")
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: phy: Fix PHY unbind crash

This fixes crashes when the PHY driver is no longer bound to the device.

There is still a fair amount of work to be done to get the unbind -> bind
sequent to result in a functional state, but that will be net-next material.

These two problems existed for as long as PHYLIB as been around.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There are number of function calls, originating from user-space,
typically through the Ethernet driver that can make us crash by
dereferencing phydev->drv which will be NULL once we unbind the driver
from the PHY.

There are still functional issues that prevent an unbind then rebind to
work, but these will be addressed separately.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PHY library does not deal very well with bind and unbind events. The first
thing we would see is that we were not properly canceling the PHY state machine
workqueue, so we would be crashing while dereferencing phydev->drv since there
is no driver attached anymore.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp has changed to use rhlist for transport rhashtable since commit
7fda702f ("sctp: use new rhlist interface on sctp transport
rhashtable").

But rhltable_insert_key doesn't check the duplicate node when inserting
a node, unlike rhashtable_lookup_insert_key. It may cause duplicate
assoc/transport in rhashtable. like:

 client (addr A, B)                 server (addr X, Y)
    connect to X           INIT (1)
                        ------------>
    connect to Y           INIT (2)
                        ------------>
                         INIT_ACK (1)
                        <------------
                         INIT_ACK (2)
                        <------------

After sending INIT (2), one transport will be created and hashed into
rhashtable. But when receiving INIT_ACK (1) and processing the address
params, another transport will be created and hashed into rhashtable
with the same addr Y and EP as the last transport. This will confuse
the assoc/transport's lookup.

This patch is to fix it by returning err if any duplicate node exists
before inserting it.

Fixes: 7fda702f ("sctp: use new rhlist interface on sctp transport rhashtable")
Reported-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some Cavium dev boards have firmware which doesn't supply a proper
ethernet-phy-ieee802.3-c22" compatible property.  Restore these boards
to working order by whitelisting this compatible value.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add constants and callback functions for the dwmac on rk3328 socs.
As can be seen, the base structure is the same, only registers and the
bits in them moved slightly.
Signed-off-by: david.wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now when sending a packet, sctp_transport_dst_check will check if dst
is obsolete by calling ipv4/ip6_dst_check. But they return obsolete
only when adding a new cache, after that when the cache's pmtu is
updated again, it will not trigger transport->dst/pmtu's update.

It can be reproduced by reducing route's pmtu twice. At the 1st time
client will add a new cache, and transport->pathmtu gets updated as
sctp_transport_dst_check finds it's obsolete. But at the 2nd time,
cache's mtu is updated, sctp client will never send out any packet,
because transport->pmtu has no chance to update.

This patch is to fix this by also checking if transport pmtu is dst
mtu in sctp_transport_dst_check, so that transport->pmtu can be
updated on time.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: add receiver-side procedures for stream reconf ssn reset request chunk

Patch 3/7 and 4/7 are to implement receiver-side procedures for the
Outgoing and Incoming SSN Reset Request Parameter described in rfc6525
section 5.2.2 and 5.2.3

Patch 1/7 and 2/7 are ahead of them to define some apis.

Patch 5/7-7/7 are to add the process of reconf chunk event in rx path.

Note that with this patchset, asoc->reconf_enable has no chance yet to
be set, until the patch "sctp: add get and set sockopt for reconf_enable"
is applied in the future. As we can not just enable it when sctp is not
capable of processing reconf chunk yet.

v1->v2:
  - re-split the patchset and make sure it has no dead codes for review.
  - rename the titles of the commits and improve some changelogs.
  - drop __packed from some structures in patch 1/7.
  - fix some kbuild warnings in patch 3/7 by initializing str_p = NULL.
  - sctp_chunk_lookup_strreset_param changes to return sctp_paramhdr_t *
    and uses sctp_strreset_tsnreq to access request_seq in patch 3/7.
  - use __u<size> in uapi sctp.h in patch 1/7.
  - do str_list endian conversion when generating stream_reset_event in patch
    2/7.
  - remove str_list endian conversion, pass resp_seq param with network endian
    to lookup_strreset_param in 3/7.
  - move str_list endian conversion out of sctp_make_strreset_req, so that
    sctp_make_strreset_req can be used more conveniently to process inreq in
    patch 4/7.
  - remove sctp_merge_reconf_chunk and not support response with multiparam
    in patch 6/7.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add reconf chunk event based on the sctp event
frame in rx path, it will call sctp_sf_do_reconf to process the
reconf chunk.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add a function to process the incoming reconf chunk,
in which it verifies the chunk, and traverses the param and process
it with the right function one by one.

sctp_sf_do_reconf would be the process function of reconf chunk event.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add a function sctp_verify_reconf to do some length
check and multi-params check for sctp stream reconf according to rfc6525
section 3.1.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to implement Receiver-Side Procedures for the Incoming
SSN Reset Request Parameter described in rfc6525 section 5.2.3.

It's also to move str_list endian conversion out of sctp_make_strreset_req,
so that sctp_make_strreset_req can be used more conveniently to process
inreq.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to implement Receiver-Side Procedures for the Outgoing
SSN Reset Request Parameter described in rfc6525 section 5.2.2.

Note that some checks must be after request_seq check, as even those
checks fail, strreset_inseq still has to be increase by 1.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add Stream Reset Event described in rfc6525
section 6.1.1.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to define Re-configuration Response Parameter described
in rfc6525 section 4.4. As optional fields are only for SSN/TSN Reset
Request Parameter, it uses another function to make that.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We already have counters for sent/recv packets and sent/recv bytes.
Doing a batched update to reduce the number of
u64_stats_update_begin/end().

Take care not to bother with stats update when called
speculatively.

Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) In the case where rate == priv->pkt_rate_low == priv->pkt_rate_high,
mlx4_en_auto_moderation() does a divide by zero.

2) We want to properly change the moderation parameters if rx_frames
was changed (like in ethtool -C eth0 rx-frames 16)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On the kernel side, sockaddr_storage is #define'd to
__kernel_sockaddr_storage.  Replacing struct sockaddr_storage with
struct __kernel_sockaddr_storage defined by <linux/socket.h> fixes
the following linux/rds.h userspace compilation error:

/usr/include/linux/rds.h:226:26: error: field 'dest_addr' has incomplete type
  struct sockaddr_storage dest_addr;
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Consistently use types from linux/types.h to fix the following
linux/rds.h userspace compilation errors:

/usr/include/linux/rds.h:106:2: error: unknown type name 'uint8_t'
  uint8_t name[32];
/usr/include/linux/rds.h:107:2: error: unknown type name 'uint64_t'
  uint64_t value;
/usr/include/linux/rds.h:117:2: error: unknown type name 'uint64_t'
  uint64_t next_tx_seq;
/usr/include/linux/rds.h:118:2: error: unknown type name 'uint64_t'
  uint64_t next_rx_seq;
/usr/include/linux/rds.h:121:2: error: unknown type name 'uint8_t'
  uint8_t transport[TRANSNAMSIZ];  /* null term ascii */
/usr/include/linux/rds.h:122:2: error: unknown type name 'uint8_t'
  uint8_t flags;
/usr/include/linux/rds.h:129:2: error: unknown type name 'uint64_t'
  uint64_t seq;
/usr/include/linux/rds.h:130:2: error: unknown type name 'uint32_t'
  uint32_t len;
/usr/include/linux/rds.h:135:2: error: unknown type name 'uint8_t'
  uint8_t flags;
/usr/include/linux/rds.h:139:2: error: unknown type name 'uint32_t'
  uint32_t sndbuf;
/usr/include/linux/rds.h:144:2: error: unknown type name 'uint32_t'
  uint32_t rcvbuf;
/usr/include/linux/rds.h:145:2: error: unknown type name 'uint64_t'
  uint64_t inum;
/usr/include/linux/rds.h:153:2: error: unknown type name 'uint64_t'
  uint64_t       hdr_rem;
/usr/include/linux/rds.h:154:2: error: unknown type name 'uint64_t'
  uint64_t       data_rem;
/usr/include/linux/rds.h:155:2: error: unknown type name 'uint32_t'
  uint32_t       last_sent_nxt;
/usr/include/linux/rds.h:156:2: error: unknown type name 'uint32_t'
  uint32_t       last_expected_una;
/usr/include/linux/rds.h:157:2: error: unknown type name 'uint32_t'
  uint32_t       last_seen_una;
/usr/include/linux/rds.h:164:2: error: unknown type name 'uint8_t'
  uint8_t  src_gid[RDS_IB_GID_LEN];
/usr/include/linux/rds.h:165:2: error: unknown type name 'uint8_t'
  uint8_t  dst_gid[RDS_IB_GID_LEN];
/usr/include/linux/rds.h:167:2: error: unknown type name 'uint32_t'
  uint32_t max_send_wr;
/usr/include/linux/rds.h:168:2: error: unknown type name 'uint32_t'
  uint32_t max_recv_wr;
/usr/include/linux/rds.h:169:2: error: unknown type name 'uint32_t'
  uint32_t max_send_sge;
/usr/include/linux/rds.h:170:2: error: unknown type name 'uint32_t'
  uint32_t rdma_mr_max;
/usr/include/linux/rds.h:171:2: error: unknown type name 'uint32_t'
  uint32_t rdma_mr_size;
/usr/include/linux/rds.h:212:9: error: unknown type name 'uint64_t'
 typedef uint64_t rds_rdma_cookie_t;
/usr/include/linux/rds.h:215:2: error: unknown type name 'uint64_t'
  uint64_t addr;
/usr/include/linux/rds.h:216:2: error: unknown type name 'uint64_t'
  uint64_t bytes;
/usr/include/linux/rds.h:221:2: error: unknown type name 'uint64_t'
  uint64_t cookie_addr;
/usr/include/linux/rds.h:222:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:228:2: error: unknown type name 'uint64_t'
  uint64_t  cookie_addr;
/usr/include/linux/rds.h:229:2: error: unknown type name 'uint64_t'
  uint64_t  flags;
/usr/include/linux/rds.h:234:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:240:2: error: unknown type name 'uint64_t'
  uint64_t local_vec_addr;
/usr/include/linux/rds.h:241:2: error: unknown type name 'uint64_t'
  uint64_t nr_local;
/usr/include/linux/rds.h:242:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:243:2: error: unknown type name 'uint64_t'
  uint64_t user_token;
/usr/include/linux/rds.h:248:2: error: unknown type name 'uint64_t'
  uint64_t  local_addr;
/usr/include/linux/rds.h:249:2: error: unknown type name 'uint64_t'
  uint64_t  remote_addr;
/usr/include/linux/rds.h:252:4: error: unknown type name 'uint64_t'
    uint64_t compare;
/usr/include/linux/rds.h:253:4: error: unknown type name 'uint64_t'
    uint64_t swap;
/usr/include/linux/rds.h:256:4: error: unknown type name 'uint64_t'
    uint64_t add;
/usr/include/linux/rds.h:259:4: error: unknown type name 'uint64_t'
    uint64_t compare;
/usr/include/linux/rds.h:260:4: error: unknown type name 'uint64_t'
    uint64_t swap;
/usr/include/linux/rds.h:261:4: error: unknown type name 'uint64_t'
    uint64_t compare_mask;
/usr/include/linux/rds.h:262:4: error: unknown type name 'uint64_t'
    uint64_t swap_mask;
/usr/include/linux/rds.h:265:4: error: unknown type name 'uint64_t'
    uint64_t add;
/usr/include/linux/rds.h:266:4: error: unknown type name 'uint64_t'
    uint64_t nocarry_mask;
/usr/include/linux/rds.h:269:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:270:2: error: unknown type name 'uint64_t'
  uint64_t user_token;
/usr/include/linux/rds.h:274:2: error: unknown type name 'uint64_t'
  uint64_t user_token;
/usr/include/linux/rds.h:275:2: error: unknown type name 'int32_t'
  int32_t  status;
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Include <linux/in.h> to fix the following linux/mroute.h userspace
compilation errors:

/usr/include/linux/mroute.h:58:18: error: field 'vifc_lcl_addr' has incomplete type
  struct in_addr vifc_lcl_addr;     /* Local interface address */
/usr/include/linux/mroute.h:61:17: error: field 'vifc_rmt_addr' has incomplete type
  struct in_addr vifc_rmt_addr; /* IPIP tunnel addr */
/usr/include/linux/mroute.h:72:17: error: field 'mfcc_origin' has incomplete type
  struct in_addr mfcc_origin;  /* Origin of mcast */
/usr/include/linux/mroute.h:73:17: error: field 'mfcc_mcastgrp' has incomplete type
  struct in_addr mfcc_mcastgrp;  /* Group in question */
/usr/include/linux/mroute.h:84:17: error: field 'src' has incomplete type
  struct in_addr src;
/usr/include/linux/mroute.h:85:17: error: field 'grp' has incomplete type
  struct in_addr grp;
/usr/include/linux/mroute.h:109:17: error: field 'im_src' has incomplete type
  struct in_addr im_src,im_dst;
/usr/include/linux/mroute.h:109:24: error: field 'im_dst' has incomplete type
  struct in_addr im_src,im_dst;
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Include <linux/in6.h> to fix the following linux/mroute6.h userspace
compilation errors:

/usr/include/linux/mroute6.h:80:22: error: field 'mf6cc_origin' has incomplete type
  struct sockaddr_in6 mf6cc_origin;  /* Origin of mcast */
/usr/include/linux/mroute6.h:81:22: error: field 'mf6cc_mcastgrp' has incomplete type
  struct sockaddr_in6 mf6cc_mcastgrp;  /* Group in question */
/usr/include/linux/mroute6.h:91:22: error: field 'src' has incomplete type
  struct sockaddr_in6 src;
/usr/include/linux/mroute6.h:92:22: error: field 'grp' has incomplete type
  struct sockaddr_in6 grp;
/usr/include/linux/mroute6.h:132:18: error: field 'im6_src' has incomplete type
  struct in6_addr im6_src, im6_dst;
/usr/include/linux/mroute6.h:132:27: error: field 'im6_dst' has incomplete type
  struct in6_addr im6_src, im6_dst;
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Include <linux/in6.h> to fix the following linux/ipv6_route.h userspace
compilation errors:

/usr/include/linux/ipv6_route.h:42:19: error: field 'rtmsg_dst' has incomplete type
  struct in6_addr  rtmsg_dst;
/usr/include/linux/ipv6_route.h:43:19: error: field 'rtmsg_src' has incomplete type
  struct in6_addr  rtmsg_src;
/ust/include/linux/ipv6_route.h:44:19: error: field 'rtmsg_gateway' has incomplete type
  struct in6_addr  rtmsg_gateway;
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

After sending device capability queries and requests to the vNIC Server,
an interrupt is triggered and the responses are written to the driver's
CRQ response buffer. Since the interrupt can be triggered before all
responses are written and visible to the partition, there is a danger
that the interrupt handler or tasklet can terminate before all responses
are read, resulting in a failure to initialize the device.

To avoid this scenario, when capability commands are sent, we set
a flag that will be checked in the following interrupt tasklet that
will handle the capability responses from the server. Once all
responses have been handled, the flag is disabled; and the tasklet
is allowed to terminate.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Two different counters were being used for capabilities
requests and queries. These commands are not called
at the same time so there is no reason a single counter
cannot be used.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a tasklet to process queued commands or messages received from
firmware instead of processing them in the interrupt handler. Note that
this handler does not process network traffic, but communications related
to resource allocation and device settings.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds the backbone required for the various HW initalizations
which are necessary for the FCoE driver (qedf) for QLogic FastLinQ
4xxxx line of adapters - FW notification, resource initializations, etc.
Signed-off-by: Arun Easi <arun.easi@cavium.com>
Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following message is logged from time to time when using i40e:
NOHZ: local_softirq_pending 08

i40e may schedule napi from a workqueue. Afterwards, softirqs are not run
in a deterministic time frame. The problem is the same as what was
described in commit ec13ee80 ("virtio_net: invoke softirqs after
__napi_schedule") and this patch applies the same fix to i40e.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>