The output of "make versioncheck" told us that:

drivers/staging/media/easycap/easycap_ioctl.c: 2442: need
linux/version.h

If we take a look at the code, we will see the macro KERNEL_VERSION be
used. So, we need this include.

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <linux-media@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org >
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The output of "make versioncheck" told us that:

drivers/staging/vme/devices/vme_pio2_core.c: 13 linux/version.h not needed.
drivers/staging/vme/devices/vme_pio2_gpio.c: 13 linux/version.h not needed.

If we take a look at these files, we will agree to remove it.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <devel@driverdev.osuosl.org>
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The original code had some confusion about the dimensions of the array.
It should have been an array of 2 element arrays but it was declared as
an array of 50 element arrays.

The limitter on the outside array should have been
ARRAY_SIZE(chan_freq_list) or 26 but instead 50 was used.  It meant that
we read past the end.  It's probably harmless but it's obviously worth
fixing.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a code style issue.
Signed-off-by: Benedikt Bergenthal <benedikt@kdrennert.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is possible to misconfigure a kernel by selecting the rtllib crypto
routines without enabling the underlying support from the crypto library.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We don't use the rxcmdpkt[] counters at all and we can remove them.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When we received a command we incremented a stat counter depending on
the type of message.  The problem is there were 8 types of commands but
there were only 4 counters allocated so it corrupted memory past the
end of the rxcmdpkt[] array.

The fix is just to remove the counters because they aren't used.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix printk format warnings by using 't' modifier for ptrdiff_t.

drivers/staging/android/alarm.c:344:2: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
drivers/staging/android/alarm.c:367:3: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix spelling typo in comments within android drivers.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no longer any need for this as we have separate
info_mask elements for raw and processed value reads.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Until now all channels have had read/write attributes. This patch
allows for channels where we can't actually read the value (or for
output devices, write it!)

v2 introduces separate elements for processed and raw thus removing
some special case code from the core.  Thanks to Lars-Peter for an
excellent suggestion!
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
This one stands along as it merged just before the series
doing all the other drivers.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
No processed values in resolvers at the moment.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
No processed values in resolvers at the moment.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
No processed values in resolvers at the moment.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
No processed values for magnetometers.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
Note that minimal change route taken here. The read_raw callbacks
in both drivers could do fewer checks to identify the channel than
they now do.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
No processed values in IMU.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
No processed values in gyroscopes.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
No processed versions in DACs.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
No processed values for adc's.

Updated to include the spear adc driver (hence introducing a
dependency on the patch that adds that driver).
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
No processed values in accelerometers.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This will allow us to have drivers where the channel value
may not be read or written but other information is available.
Also adds the ability to have both processed and raw access
to a given channel, though in most cases this doesn't make
sense.

Ultimately will lead to simpler code by allowing us to drop
the special case handling for the value reading cases.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update comments in comedi.h accordingly.
Signed-off-by: W. Trevor King <wking@drexel.edu>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The mask value in the read_raw/write_raw is absolute
value, not the bit position value.
Fixing this in the implemented function to check value,
not with the bit position value.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

release_firmware() deals gracefullt with NULL pointers - it's
redundant to check for them before calling the function.

Also remove a few pointless comments - it's rather obvious from the
code that kfree() free's a buffer and that release_firmware() releases
firmware - comments just stating that add no value.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checking for a NULL pointer before calling release_firmware() is
redundant since the function does that check itself.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow the default values for the module parameters for the default
initial buffer size and default maximum buffer size to be specified in
the kernel configuration.

I'm not sure what the defaults for the defaults for the defaults should
be, but 64 KiB seems to small, so I used values suggested by Bernd Porr,
which are 2048 KiB for the default initial buffer size and 20480 for the
default maximum buffer size.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Bernd Porr <berndporr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For comedi subdevices that support asynchronous transfer commands, the
initial buffer size and maximum buffer size for the transfer are both
set to 64 KiB when the comedi device is "attached" to the hardware
device.  For many applications with reasonable fast sample rates and
slow user-space (e.g. Python) these sizes are a bit too small.

A task with CAP_SYS_ADMIN privileges can change the maximum buffer size
for a comedi subdevice with an ioctl call or by writing to a device
attribute file in sysfs, but that's not very convenient.  For comedi
devices attached during system startup, this could be done by a start-up
script, but for hot-plugged devices it would require scripts run by udev
rules, etc.

Rather than use hardwired values, this patch introduces a couple of
module parameters to set the defaults for the initial buffer size
(comedi_default_buf_size_kb) and maximum buffer size
(comedi_default_buf_maxsize_kb).  These values are applied in place of
the previous hard-wired values when the comedi device is "attached".
The module parameter values are in units of KiB for consistency with the
existing device attribute files.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch implements the basic single data conversion support for
the SPEAr600 SoC ADC. The register layout of SPEAr600 differs a bit
from other SPEAr SoC variants (e.g. SPEAr3xx). These differences are
handled via DT compatible testing. Resulting in a multi-arch binary.

This driver is currently tested only on SPEAr600. Future patches may add
support for other SoC variants (SPEAr3xx) and features like software
buffer or DMA.
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Intersil's ISL29028 is concurrent Ambient Light and
Proximity Sensor device.
Add driver to access the light and IR intensity and
proximity value via iio interface.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding channel info IIO_CHAN_INFO_SAMP_FREQ to select
different sampling frequency per channel wise.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I was warned long ago that this macro would cause trouble but didn't
heed the advice, hence I'm unwinding it now!
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>