- 11 Jul, 2022 14 commits
-
-
Ryder Lee authored
Add channel time and MAC ready stats. Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Deren Wu authored
Add new function mt7921_set_tx_sar_pwr() to update SAR power from .set_sar_specs and ACPI setting. Both settings would be merged into mt76_freq_range_power for final tx power value. Reviewed-by:
Sean Wang <sean.wang@mediatek.com> Co-developed-by:
Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by:
Deren Wu <deren.wu@mediatek.com> Signed-off-by:
-
Deren Wu authored
In ACPI SAR enabled device, mt7921 should read power limit in ACPI config. The limit value would be applied to regular tx power settings in mt76. Two major functionalities added: 1. Get SAR power table through ACPI. 2. Read power in Dynamic/Geo SAR table for tx power limit. Table note MTDS: Dynamic SAR table MTGS: Geo SAR table MTCL: Country List table (for 6GHz support) Reviewed-by:
Quan Zhou <quan.zhou@mediatek.com> Signed-off-by:
-
Deren Wu authored
Add new frequencies support in mt76_sar_freq_ranges[] * 5945 - 6165 * 6165 - 6405 * 6405 - 6525 * 6525 - 6705 * 6705 - 6865 * 6865 - 7125 Reviewed-by:
-
Dan Carpenter authored
This code is supposed to set a u32 value, but casting will not work on big endian systems. Fixes: 0a17329a ("mt76: mt7915: add debugfs knob for RF registers read/write") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Lorenzo Bianconi authored
Free the skb if mt76u_bulk_msg fails in __mt76x02u_mcu_send_msg routine. Fixes: 4c89ff2c ("mt76: split __mt76u_mcu_send_msg and mt76u_mcu_send_msg routines") Co-developed-by:
Gergo Koteles <soyer@irl.hu> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Fix the following sparse warning in mt7915_rf_regval_get routine: drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c:979:16: warning: cast to restricted __le32 Fixes: 0a17329a ("mt76: mt7915: add debugfs knob for RF registers read/write") Signed-off-by:
-
Johannes Berg authored
The robots report that we're now casting to a differently sized integer, which is correct, and the previous patch had erroneously removed it. Reported-by:
kernel test robot <lkp@intel.com> Fixes: 4ee186fa ("wifi: mac80211_hwsim: fix race condition in pending packet") Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Jeongik Cha authored
A pending packet uses a cookie as an unique key, but it can be duplicated because it didn't use atomic operators. And also, a pending packet can be null in hwsim_tx_info_frame_received_nl due to race condition with mac80211_hwsim_stop. For this, * Use an atomic type and operator for a cookie * Add a lock around the loop for pending packets Signed-off-by:
Jeongik Cha <jeongik@google.com> Link: https://lore.kernel.org/r/20220704084354.3556326-1-jeongik@google.comSigned-off-by:
-
Christophe JAILLET authored
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/dfb438a6a199ee4c95081fa01bd758fd30e50931.1656962156.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
MeiChia Chiu authored
When mac80211 downgrades working bandwidth, the center_freq and center_freq1 need to be recalculated. There is a typo in the case of downgrading bandwidth from 320MHz to 160MHz which would cause a wrong frequency value. Reviewed-by:
Money Wang <Money.Wang@mediatek.com> Signed-off-by:
MeiChia Chiu <MeiChia.Chiu@mediatek.com> Link: https://lore.kernel.org/r/20220708095823.12959-1-MeiChia.Chiu@mediatek.comSigned-off-by:
-
Veerendranath Jakkam authored
commit dd374f84 ("wifi: nl80211: expose link ID for associated BSSes") used a top-level attribute to send link ID of the associated BSS in the nested attribute NL80211_ATTR_BSS. But since NL80211_ATTR_BSS is a nested attribute of the attributes defined in enum nl80211_bss, define a new attribute in enum nl80211_bss and use it for sending the link ID of the BSS. Fixes: dd374f84 ("wifi: nl80211: expose link ID for associated BSSes") Signed-off-by:
Veerendranath Jakkam <quic_vjakkam@quicinc.com> Reviewed-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20220708122607.1836958-1-quic_vjakkam@quicinc.comSigned-off-by:
-
Veerendranath Jakkam authored
A comment in cfg80211_mlme_mgmt_tx() is describing this API used only for transmitting action frames. Fix the comment since cfg80211_mlme_mgmt_tx() can be used to transmit any management frame. Signed-off-by:
-
Veerendranath Jakkam authored
nl80211_pre_doit() using nla_get_u16() to read u8 attribute NL80211_ATTR_MLO_LINK_ID. Fix this by using nla_get_u8() to read NL80211_ATTR_MLO_LINK_ID attribute. Signed-off-by:
-
- 08 Jul, 2022 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.20. Major changes: ath9k * fix use-after-free in ath9k_hif_usb_rx_cb()
-
Jiang Jian authored
there is unexpected word "the" in comments need to remove Signed-off-by:
Jiang Jian <jiangjian@cdjrlc.com> Acked-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220621080240.42198-1-jiangjian@cdjrlc.com
-
Zhang Jiaming authored
There is a typo(isn't') in comments. It maybe 'isn't' instead of 'isn't''. Signed-off-by:
Zhang Jiaming <jiaming@nfschina.com> Signed-off-by:
-
- 01 Jul, 2022 21 commits
-
-
Aloka Dixit authored
Add support to retrieve EHT capabilities and EHT operation elements passed by the userspace in the beacon template and store the pointers in struct cfg80211_ap_settings to be used by the drivers. Co-developed-by:
Vikram Kandukuri <quic_vikram@quicinc.com> Signed-off-by:
Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20220523064904.28523-1-quic_alokad@quicinc.comSigned-off-by:
-
Veerendranath Jakkam authored
Increase akm_suites array size in struct cfg80211_crypto_settings to 10 and advertise the capability to userspace. This allows userspace to send more than two AKMs to driver in netlink commands such as NL80211_CMD_CONNECT. This capability is needed for implementing WPA3-Personal transition mode correctly with any driver that handles roaming internally. Currently, the possible AKMs for multi-AKM connect can include PSK, PSK-SHA-256, SAE, FT-PSK and FT-SAE. Since the count is already 5, increasing the akm_suites array size to 10 should be reasonable for future usecases. Signed-off-by:
-
Johannes Berg authored
The current check only worked for AP mode, but we can do radar detection in mesh as well (for example). We could try to check this using wdev_chandef(), but we also don't really care since the chandef is passed in and we have no need to use it anymore (since we added the argument in commit d2859df5 ("cfg80211/mac80211: DFS setup chandef for cac event")). Change-Id: I856e4344d5e64ff4d2eead0b4c53b11f264be9b8 Fixes: 7b0a0e3c ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by:
-
Johannes Berg authored
In many cases we might get here from driver code that's not really set up to care about the locking, and for the non-MLO cases we really don't care so much about it. So relax the checking here for now, perhaps we should even remove it completely since we might not really care if we point to an invalid link's chandef and can require the caller to check the link validity first. Fixes: 7b0a0e3c ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by:
-
Johannes Berg authored
We need to hold the wdev mutex already in order to call nl80211_parse_tx_bitrate_mask(), so acquire it earlier. Fixes: 7b0a0e3c ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by:
-
Johannes Berg authored
We need wdev_chandef() in this code, which now requires the wdev mutex due to the per-link nature. Hold it here to make sure we can access the link. Reported-by: syzbot+b4e9aa0f32ffd9902442@syzkaller.appspotmail.com Fixes: 7b0a0e3c ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by:
-
Johannes Berg authored
Prior to commit 7b0a0e3c ("wifi: cfg80211: do some rework towards MLO link APIs") the interface type didn't really matter here, but now we need to handle all of the possible cases. Add IBSS ("ADHOC") and handle it. Fixes: 7b0a0e3c ("wifi: cfg80211: do some rework towards MLO link APIs") Reported-by: syzbot+90d912872157e63589e4@syzkaller.appspotmail.com Signed-off-by:
-
Johannes Berg authored
If the interface isn't (yet) added to the driver, skip the link info update. This was previously done for the BSS info changes, but I forgot to copy the same check here. Fixes: 7b7090b4 ("wifi: mac80211: split bss_info_changed method") Reported-by: syzbot+bce2ca140cc00578ed07@syzkaller.appspotmail.com Signed-off-by:
-
Felix Fietkau authored
When a client does not generate any local tx activity, accumulating airtime deficit for the round-robin scheduler can be harmful. If this goes on for too long, the deficit could grow quite large, which might cause unreasonable initial latency once the client becomes active Signed-off-by:
-
Felix Fietkau authored
Now that the global pending airtime is more relevant for airtime fairness, it makes sense to make it accessible via debugfs for debugging Signed-off-by:
-
Felix Fietkau authored
In order to maintain fairness, the amount of queueing needs to be limited beyond the simple per-station AQL budget, otherwise the driver can simply repeatedly do scheduling rounds until all queues that have not used their AQL budget become eligble. To be conservative, use the high AQL limit for the first txq and add half of the low AQL for each subsequent queue. Signed-off-by:
-
Felix Fietkau authored
This allows proper deficit accounting to ensure that they don't carry their deficit until the next time they become active Signed-off-by:
-
Felix Fietkau authored
When queueing packets for a station, deficit only gets added once the packets have been transmitted, which could be much later. During that time, a lot of temporary unfairness could happen, which could lead to bursty behavior. Fix this by subtracting the aql_tx_pending when checking the deficit in tx scheduling. Signed-off-by:
-
Felix Fietkau authored
32 bit is more than enough range for the airtime deficit Signed-off-by:
-
Felix Fietkau authored
This reverts commits 6a789ba6 and 2433647b. The virtual time scheduler code has a number of issues: - queues slowed down by hardware/firmware powersave handling were not properly handled. - on ath10k in push-pull mode, tx queues that the driver tries to pull from were starved, causing excessive latency - delay between tx enqueue and reported airtime use were causing excessively bursty tx behavior The bursty behavior may also be present on the round-robin scheduler, but there it is much easier to fix without introducing additional regressions Signed-off-by:
-
Johannes Berg authored
Somehow kernel-doc complains here about strong markup, but we really don't need the [] so just remove that. Signed-off-by: -
Johannes Berg authored
These struct members no longer exist, remove them from documentation. Signed-off-by: -
Mauro Carvalho Chehab authored
struct link_sta_info has now a cur_max_bandwidth data: net/mac80211/sta_info.h:569: warning: Function parameter or member 'cur_max_bandwidth' not described in 'link_sta_info' Copy the meaning from struct sta_info, documenting it. Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/37d898634bb30776442a33833c48cbb21c90ecc6.1656409369.git.mchehab@kernel.orgSigned-off-by:
-
Mauro Carvalho Chehab authored
The lack of the colon makes it not parse the function parameter: include/net/mac80211.h:6250: warning: Function parameter or member 'vif' not described in 'ieee80211_channel_switch_disconnect' Fix it. Signed-off-by:
-
Mauro Carvalho Chehab authored
There are currently 17 kernel-doc warnings on this file: include/net/cfg80211.h:391: warning: Function parameter or member 'bw' not described in 'ieee80211_eht_mcs_nss_supp' include/net/cfg80211.h:437: warning: Function parameter or member 'eht_cap' not described in 'ieee80211_sband_iftype_data' include/net/cfg80211.h:507: warning: Function parameter or member 's1g' not described in 'ieee80211_sta_s1g_cap' include/net/cfg80211.h:1390: warning: Function parameter or member 'counter_offset_beacon' not described in 'cfg80211_color_change_settings' include/net/cfg80211.h:1390: warning: Function parameter or member 'counter_offset_presp' not described in 'cfg80211_color_change_settings' include/net/cfg80211.h:1430: warning: Enum value 'STATION_PARAM_APPLY_STA_TXPOWER' not described in enum 'station_parameters_apply_mask' include/net/cfg80211.h:2195: warning: Function parameter or member 'dot11MeshConnectedToAuthServer' not described in 'mesh_config' include/net/cfg80211.h:2341: warning: Function parameter or member 'short_ssid' not described in 'cfg80211_scan_6ghz_params' include/net/cfg80211.h:3328: warning: Function parameter or member 'kck_len' not described in 'cfg80211_gtk_rekey_data' include/net/cfg80211.h:3698: warning: Function parameter or member 'ftm' not described in 'cfg80211_pmsr_result' include/net/cfg80211.h:3828: warning: Function parameter or member 'global_mcast_stypes' not described in 'mgmt_frame_regs' include/net/cfg80211.h:4977: warning: Function parameter or member 'ftm' not described in 'cfg80211_pmsr_capabilities' include/net/cfg80211.h:5742: warning: Function parameter or member 'u' not described in 'wireless_dev' include/net/cfg80211.h:5742: warning: Function parameter or member 'links' not described in 'wireless_dev' include/net/cfg80211.h:5742: warning: Function parameter or member 'valid_links' not described in 'wireless_dev' include/net/cfg80211.h:6076: warning: Function parameter or member 'is_amsdu' not described in 'ieee80211_data_to_8023_exthdr' include/net/cfg80211.h:6949: warning: Function parameter or member 'sig_dbm' not described in 'cfg80211_notify_new_peer_candidate' Address them, in order to build a better documentation from this header. Signed-off-by:
-
Peter Chiu authored
S1g action frame with code 22 is not protected so update the robust action frame list. Signed-off-by:
Peter Chiu <chui-hao.chiu@mediatek.com> Link: https://lore.kernel.org/r/20220622010820.17522-1-chui-hao.chiu@mediatek.comSigned-off-by:
-
- 21 Jun, 2022 2 commits
-
-
Ping-Ke Shih authored
The DPK is a kind of RF calibration whose algorithm is to fine tune parameters and calibrate, and check the result. If the result isn't good enough, it could adjust parameters and try again. This issue is to read and show the result, but it could be a negative calibration result that causes divisor 0 and core dump. So, fix it by phy_div() that does division only if divisor isn't zero; otherwise, zero is adopted. divide error: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 728 Comm: wpa_supplicant Not tainted 5.10.114-16019-g462a1661811a #1 <HASH:d024 28> RIP: 0010:rtw8852a_dpk+0x14ae/0x288f [rtw89_core] RSP: 0018:ffffa9bb412a7520 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 00000000000180fc RDI: ffffa141d01023c0 RBP: ffffa9bb412a76a0 R08: 0000000000001319 R09: 00000000ffffff92 R10: ffffffffc0292de3 R11: ffffffffc00d2f51 R12: 0000000000000000 R13: ffffa141d01023c0 R14: ffffffffc0290250 R15: ffffa141d0102638 FS: 00007fa99f5c2740(0000) GS:ffffa142e5e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000013e8e010 CR3: 0000000110d2c000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: rtw89_core_sta_add+0x95/0x9c [rtw89_core <HASH:d239 29>] rtw89_ops_sta_state+0x5d/0x108 [rtw89_core <HASH:d239 29>] drv_sta_state+0x115/0x66f [mac80211 <HASH:81fe 30>] sta_info_insert_rcu+0x45c/0x713 [mac80211 <HASH:81fe 30>] sta_info_insert+0xf/0x1b [mac80211 <HASH:81fe 30>] ieee80211_prep_connection+0x9d6/0xb0c [mac80211 <HASH:81fe 30>] ieee80211_mgd_auth+0x2aa/0x352 [mac80211 <HASH:81fe 30>] cfg80211_mlme_auth+0x160/0x1f6 [cfg80211 <HASH:00cd 31>] nl80211_authenticate+0x2e5/0x306 [cfg80211 <HASH:00cd 31>] genl_rcv_msg+0x371/0x3a1 ? nl80211_stop_sched_scan+0xe5/0xe5 [cfg80211 <HASH:00cd 31>] ? genl_rcv+0x36/0x36 netlink_rcv_skb+0x8a/0xf9 genl_rcv+0x28/0x36 netlink_unicast+0x27b/0x3a0 netlink_sendmsg+0x2aa/0x469 sock_sendmsg_nosec+0x49/0x4d ____sys_sendmsg+0xe5/0x213 __sys_sendmsg+0xec/0x157 ? syscall_enter_from_user_mode+0xd7/0x116 do_syscall_64+0x43/0x55 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa99f6e689b Fixes: e3ec7017 ("rtw89: add Realtek 802.11ax driver") Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220613065144.15647-1-pkshih@realtek.com
-
Po-Hao Huang authored
Previously we only disable invalid reports for 52A, since we plan to support more ICs in the future, enable settings for those as well. Signed-off-by:
Po-Hao Huang <phhuang@realtek.com> Signed-off-by:
-
