- 09 Aug, 2014 4 commits
-
-
Ben Skeggs authored
This removes the previous hack that worked on some boards. Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
As documented at: ftp://download.nvidia.com/open-gpu-doc/gk104-disable-graphics-power-gating/1/gk104-disable-graphics-power-gating.txt NVIDIA were not able document the steps necessary to detect whether this is required or not at this time. However, they did confirm that this procedure is safe to perform unconditionally on GK104/6. GK107 does not have the power gating feature, and it was recommended that we do not perform these steps there as the effects were not verified. The disable path is from observing the binary driver, and not documented in the link above. Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Alexandre Courbot authored
Pages allocated using the DMA API have a coherent memory mapping. Make this mapping visible to drivers so they can decide to use it instead of creating their own redundant one. Signed-off-by:
Alexandre Courbot <acourbot@nvidia.com> Acked-by:
David Airlie <airlied@linux.ie> Signed-off-by:
-
- 07 Aug, 2014 4 commits
-
-
Dave Airlie authored
This reverts commit 48ba8137. Thanks to Chris: "drm_file->is_master is not synomous with having drm_file->master == drm_file->minor->master. This is because drm_file->master is the same for all drm_files of the same generation and so when there is a master, every drm_file believes itself to be the master. Confusion ensues and things go pear shaped when one file is closed and there is no master anymore." Conflicts: drivers/gpu/drm/drm_drv.c drivers/gpu/drm/drm_stub.c
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Changes for v3.17-rc1 Mostly some cleanup all over the place. Pitch alignment limitations of the display controller are now honored and job submission is 64-bit safe. The SOR output (used for eDP) properly configures sync signal polarities according to the display mode rather than hard-coding them to some value and the number of bits per color is now taken from the panel rather than hard-coded to properly support 24-bit vs. 18-bit panels. The DSI controller now properly supports non-continuous clock mode. GEM objects can now have their flags and tiling mode modified via IOCTLs to allow buffers imported from Nouveau to be properly displayed. Newer generations of the Tegra display controller can also detile block linear buffers at scan-out time. Finally the driver now properly exports MODULE_DEVICE_TABLEs to allow it to be automatically loaded when built as a module. * tag 'drm/tegra/for-3.17-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: add MODULE_DEVICE_TABLEs drm/tegra: dc - Reset controller on driver remove drm/tegra: Properly align stride for framebuffers drm/tegra: sor - Configure proper sync polarities drm/tegra: sor - Use bits-per-color from panel drm/tegra: Make job submission 64-bit safe drm/tegra: Allow non-authenticated processes to create buffer objects drm/tegra: Add SET/GET_FLAGS IOCTLs drm/tegra: Add SET/GET_TILING IOCTLs drm/tegra: Implement more tiling modes drm/tegra: dsi - Handle non-continuous clock flag drm/tegra: sor - missing unlock on error
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/panel: Changes for v3.17-rc1 Panels can now be more finely controlled via .prepare() and .unprepare() callbacks in addition to .enable() and .disable(). New kerneldoc details what they are supposed to do and when they should be called. The simple panel driver gained support for a couple of new panels and it is now possible to specify additional delays during power up and power down sequences if panels require it. DSI devices can now advertise that they support non-continuous clock mode which will allow DSI host controllers to disable the high speed clock after transmissions to save power. * tag 'drm/panel/for-3.17-rc1' of git://anongit.freedesktop.org/tegra/linux: (30 commits) drm/panel: simple: Use devm_gpiod_get_optional() drm/dsi: Replace upcasting macro by function drm/panel: ld9040: Replace upcasting macro by function drm/exynos: dp: Modify driver to support drm_panel drm/exynos: Move DP setup into commit() drm/panel: simple: Add AUO B133HTN01 panel support drm/panel: simple: Support delays in panel functions drm/panel: simple: Add proper definition for prepare and unprepare drm/panel: s6e8aa0: Add proper definition for prepare and unprepare drm/panel: ld9040: Add proper definition for prepare and unprepare drm/tegra: Add support for panel prepare and unprepare routines drm/exynos: dsi: Add support for panel prepare and unprepare routines drm/exynos: dpi: Add support for panel prepare and unprepare routines drm/panel: simple: Add dummy prepare and unprepare routines drm/panel: s6e8aa0: Add dummy prepare and unprepare routines drm/panel: ld9040: Add dummy prepare and unprepare routines drm/panel: Provide convenience wrapper for .get_modes() drm/panel: add .prepare() and .unprepare() functions drm/panel: simple: Remove simple-panel compatible drm/panel: simple: Add Innolux N116BGE panel support ...
-
Alexandre Courbot authored
Use the new devm_gpiod_get_optional() to simplify the probe code. Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
- 06 Aug, 2014 22 commits
-
-
Thierry Reding authored
Using a function instead of a macro provides proper type checking. Signed-off-by: -
Thierry Reding authored
Using a function instead of a macro provides proper type checking. Signed-off-by: -
Ajay Kumar authored
Add drm_panel controls to support powerup/down of the eDP panel, if one is present at the sink side. Signed-off-by:
Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Ajay Kumar authored
Add commit callback for exynos_dp, and move the DP link training, video configuration code from the hotplug handler into commit(). Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Ajay Kumar authored
The AUO B133HTN01 is a 13.6" FHD TFT LCD panel connecting to an eDP interface and with an integrated LED backlight unit. This panel is used on the Samsung Chromebook 2 (XE503C32). Signed-off-by:
-
Ajay Kumar authored
For most of the panels, we need to provide delays during various stages of panel power up and power down. Add a structure to hold those delay values and use them in corresponding functions. Signed-off-by:
-
Ajay Kumar authored
Move out code from enable and disable routines to prepare and unprepare routines, so that functionality is properly distributed across all the panel functions. Signed-off-by:
-
Ajay Kumar authored
Move out code from enable and disable routines to prepare and unprepare routines, so that functionality is properly distributed across all the panel functions. Signed-off-by:
-
Ajay Kumar authored
Move out code from enable and disable routines to prepare and unprepare routines, so that functionality is properly distributed across all the panel functions. Signed-off-by:
-
Ajay Kumar authored
Modify tegra output driver to support the new panel calls: prepare and unprepare. Signed-off-by:
-
Ajay Kumar authored
Modify exynos_dsi driver to support the new panel calls: prepare and unprepare. Signed-off-by:
-
Ajay Kumar authored
Modify exynos_dpi driver to support the new panel calls: prepare and unprepare. Signed-off-by:
-
Ajay Kumar authored
This patch adds dummy definition for prepare and unprepare routines to simple panel driver. Signed-off-by:
-
Ajay Kumar authored
This patch adds dummy definition for prepare and unprepare routines to s6e8aa0 panel driver. Signed-off-by:
-
Ajay Kumar authored
This patch adds dummy definition for prepare and unprepare routines to ld9040 panel driver. Signed-off-by:
-
Ajay Kumar authored
Add a convenience wrapper for the struct drm_panel_funcs' .get_modes() function so that not every driver needs to check that the panel driver implements the function before calling it. Signed-off-by:
-
Ajay Kumar authored
Panels often require an initialization sequence that consists of three steps: a) powering up the panel, b) starting transmission of video data and c) enabling the panel (e.g. turn on backlight). This is usually necessary to avoid visual glitches at the beginning of video data transmission. Similarly, the shutdown sequence is typically done in three steps as well: a) disable the panel (e.g. turn off backlight), b) cease video data transmission and c) power down the panel. Currently drivers can only implement .enable() and .disable() functions, which is not enough to implement the above sequences. This commit adds a second pair of functions, .prepare() and .unprepare() to allow more fine-grained control over when the above steps are performed. Signed-off-by:
-
Thierry Reding authored
simple-panel is not a valid panel model, so there is no data (video timings, etc.) associated with it. Therefore drivers can't do anything useful with it, so it should not appear in the table of OF matches. Device trees will always need to specify the exact model of the panel. Signed-off-by: -
Thierry Reding authored
The Innolux N116BGE is an 11.6" WXGA TFT LCD panel connecting to an eDP interface and with an integrated LED backlight unit. It is used in the Tegra132 Norrin reference design. Signed-off-by: -
Dave Airlie authored
Everyone agrees we should do this, Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~dvdhrm/linuxDave Airlie authored
bunch of cleanups * 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux: drm: mark drm_context support as legacy drm: make sysfs device always available for minors drm: make minor->index available early drm: merge drm_drv.c into drm_ioctl.c drm: move module initialization to drm_stub.c drm: don't de-authenticate clients on master-close drm: drop redundant drm_file->is_master drm: extract legacy ctxbitmap flushing
-
Dave Airlie authored
We need to take the connection mutex around the link status check for non-MST case, but also around the MST link training on short HPDs. I suspect we actually should have a dpcd lock in the future as well, that just lock the local copies of dpcd and flags stored from that. Reviewed-by:
-
- 05 Aug, 2014 10 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
- Additional Hawaii fixes - Support for using the display scaler on non-fixed mode displays - Support for new firmware format that makes it easier to update - Enable dpm by default on additional asics - GPUVM improvements - Support for uncached and write combined gtt buffers - Allow allocation of BOs larger than visible vram - Various other small fixes and improvements * 'drm-next-3.17' of git://people.freedesktop.org/~agd5f/linux: (57 commits) drm/radeon: Prevent hdmi deep color if max_tmds_clock is undefined. drm/radeon: Use pflip irqs for pageflip completion if possible. (v2) drm/radeon: tweak ACCEL_WORKING2 query for the new firmware for hawaii drm/radeon: use packet3 for nop on hawaii with new firmware drm/radeon: tweak ACCEL_WORKING2 query for hawaii drm/radeon: use packet2 for nop on hawaii with old firmware drm/radeon: update IB size estimation for VM drm/radeon: split PT setup in more functions drm/radeon: add VM GART copy optimization to NI as well drm/radeon: take a BO reference on VM cleanup drm/radeon: add radeon_bo_ref function drm/radeon: remove taking mclk_lock from radeon_bo_unref drm/radeon: adjust default radeon_vm_block_size v2 drm/radeon: try to enable VM flushing once more drm/radeon: use an intervall tree to manage the VMA v2 drm/radeon: remove radeon_bo_clear_va drm/radeon: invalidate moved BOs in the VM (v2) drm/radeon: re-enable dpm by default on BTC drm/radeon: re-enable dpm by default on cayman drm/radeon: Only flush HDP cache from idle ioctl if BO is in VRAM ...
-
David Herrmann authored
This renames all drm-context helpers to drm_legacy_*() and moves the internal definitions into the new drm_legacy.h header. This header is local to DRM-core and drivers shouldn't access it. Reviewed-by:
-
Mario Kleiner authored
HDMI spec requires a valid max_tmds_clock from edid for hdmi deep color modes. If a sink violates this, disable deep color. Also add a hint to user about the deep_color module parameter if deep color is disabled due to that. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
-
David Herrmann authored
For each minor we allocate a sysfs device as minor->kdev. Currently, this is allocated and registered in drm_minor_register(). This makes it impossible to add sysfs-attributes to the device before it is registered. Therefore, they are not added atomically, nor can we move device_add() *after* ->load() is called. This patch makes minor->kdev available early, but only adds the device during minor-registration. Note that the registration is still called before ->load() as debugfs needs to be split, too. This will be fixed in follow-ups. Reviewed-by:
-
David Herrmann authored
Instead of allocating the minor-index during registration, we now do this during allocation. This way, debug-messages between minor-allocation and minor-registration will now use the correct minor instead of 0. Same is done for unregistration vs. free, so debug-messages between device-shutdown and device-destruction show proper indices. Even though minor-indices are allocated early, we don't enable minor lookup early. Instead, we keep the entry set to NULL and replace it during registration / unregistration. This way, the index is allocated but lookup only works if registered. Reviewed-by:
-
David Herrmann authored
All that is left in drm_drv.c is ioctl management. Merge it into drm_ioctl.c so we have all ioctl management in one file (and the name is much more fitting). Maybe we should now rename drm_stub.c to drm_drv.c again? Acked-by:
-
David Herrmann authored
Most of the new DRM management functions are nowadays in drm_stub.c. By moving the core module initialization to drm_stub.c we can make several global variables static and keep the stub-open helper local. The core files now look like this: drm_stub.c: Core management drm_drv.c: Ioctl dispatcher drm_ioctl.c: Actual ioctl backends drm_fops.c: Char-dev file-operations A follow-up patch will move what is left from drm_drv.c into drm_ioctl.c. Acked-by:
-
David Herrmann authored
If an active DRM-Master closes its device, we deauthenticate all clients on that master. However, if an inactive DRM-Master closes its device, we do nothing. This is quite inconsistent and breaks several scenarios: 1) If this was used as security mechanism, it fails horribly if a master closes a device while VT switched away. Furthermore, none of the few drivers using ->master_*() callbacks seems to require it, anyway. 2) If you spawn weston (or any other non-UMS compositor) in background while another compositor is active, both will get assigned to the same "drm_master" object. If the foreground compositor now exits, all clients of both the foreground AND background compositor will be de-authenticated leading to unexpected behavior. Stop this non-sense and keep clients authenticated. We don't do this when dropping DRM-Master (i.e., switching VTs) so don't do it on active-close either! Reviewed-by: -
David Herrmann authored
The drm_file->is_master field is redundant as it's equivalent to: drm_file->master && drm_file->master == drm_file->minor->master 1) "=>" Whenever we set drm_file->is_master, we also set: drm_file->minor->master = drm_file->master; Whenever we clear drm_file->is_master, we also call: drm_master_put(&drm_file->minor->master); which implicitly clears it to NULL. 2) "<=" minor->master cannot be set if it is non-NULL. Therefore, it stays as is unless a file drops it. If minor->master is NULL, it is only set by places that also adjust drm_file->is_master. Therefore, we can safely drop is_master and replace it by an inline helper that matches: drm_file->master && drm_file->master == drm_file->minor->master Reviewed-by: -
David Herrmann authored
The ctxbitmap code is only used by legacy drivers so lets try to keep it as separated as possible. Furthermore, the locking is non-obvious and kinda weird with ctxlist_mutex *and* struct_mutex. Keeping all ctxbitmap access in one file is much easier to review and makes drm_release() more readable. Reviewed-by:
-
