- 12 Feb, 2024 9 commits
-
-
Takashi Iwai authored
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS() for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs. Just a cleanup, no functional changes. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240207155140.18238-10-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS() for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs. Just a cleanup, no functional changes. Signed-off-by:
-
Takashi Iwai authored
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS() for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs. For building properly, add the dummy functions for snd_ak4531_suspend/resume() functions, too. Just a cleanup, no functional changes. Signed-off-by:
-
Takashi Iwai authored
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS() for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs. Just a cleanup, no functional changes. Signed-off-by:
-
Takashi Iwai authored
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS() for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs. For building properly, add the dummy functions for snd_sbmixer_suspend/resume() functions, too. Just a cleanup, no functional changes. Signed-off-by:
-
Takashi Iwai authored
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS() for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs. Just a cleanup, no functional changes. Signed-off-by:
-
Takashi Iwai authored
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS() for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs. Just a cleanup, no functional changes. Signed-off-by:
-
Takashi Iwai authored
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS() for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs. Just a cleanup, no functional changes. Signed-off-by:
-
Takashi Iwai authored
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS() for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs. Just a cleanup, no functional changes. Signed-off-by:
-
- 09 Feb, 2024 3 commits
-
-
Anton Yakovlev authored
Implementation of support for audio controls in accordance with the extension of the virtio sound device specification [1] planned for virtio-v1.3-cs01. The device can announce the VIRTIO_SND_F_CTLS feature. If the feature is negotiated, then an additional field appears in the configuration space: struct virtio_snd_config { ... /* number of available control elements */ __le32 controls; }; The driver can send the following requests to manage audio controls: enum { ... /* control element request types */ VIRTIO_SND_R_CTL_INFO = 0x0300, VIRTIO_SND_R_CTL_ENUM_ITEMS, VIRTIO_SND_R_CTL_READ, VIRTIO_SND_R_CTL_WRITE, VIRTIO_SND_R_CTL_TLV_READ, VIRTIO_SND_R_CTL_TLV_WRITE, VIRTIO_SND_R_CTL_TLV_COMMAND, ... }; And the device can send the following audio control event notification: enum { ... /* control element event types */ VIRTIO_SND_EVT_CTL_NOTIFY = 0x1200, ... }; See additional details in [1]. [1] https://lists.oasis-open.org/archives/virtio-comment/202104/msg00013.htmlSigned-off-by:Anton Yakovlev <anton.yakovlev@opensynergy.com> Signed-off-by:
Aiswarya Cyriac <aiswarya.cyriac@opensynergy.com> Link: https://lore.kernel.org/r/20240115133654.576068-2-aiswarya.cyriac@opensynergy.comSigned-off-by:
-
Sayed, Karimuddin authored
Add "Intel Reference board" SSID in the alc256. Enable "power saving mode" and Enable "headset jack mode". Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by:
Sayed, Karimuddin <karimuddin.sayed@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240208163904.92977-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Existing DSDT or SSDT platforms hard-code clock and frame shape configurations. For validation, we'd like to use alternate configurations. It's not always possible to generate new tables due to missing symbols, and modifying existing objects usually leads to AE_OBJECT_EXIST errors. The mechanism suggested in this patch is to add a NEW ACPI controller device with a different _ADR value. e.g. Scope (_SB_.PC00.RP08.PXSX.HDAS) { Device (SDWP) { Name (_ADR, 0x40000001) // _ADR: Address The desired _ADR can be passed as a parameter with options snd-intel-sdw-acpi sdw_ctrl_addr=0x40000001 This solution leads to minimal tables with just what the developers or validation engineers need, and without overriding any of the existing firmware definitions. It's consistent with the recommendation to extend ACPI definitions and not redefine them with a risk of conflict. Signed-off-by:Rander Wang <rander.wang@intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20240208163750.92849-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
- 04 Feb, 2024 1 commit
-
-
Stefan Binding authored
The SKUs, and associated SSIDs, are no longer going to include the CS35L41. They may come back, but will need a different quirk. Fixes: aa8e3ef4 ("ALSA: hda/realtek: Add quirks for various HP ENVY models") Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20240202170842.321818-1-sbinding@opensource.cirrus.comSigned-off-by:
-
- 02 Feb, 2024 1 commit
-
-
Ivan Orlov authored
Select CONFIG_SND_PCM when enabling CONFIG_SND_CORE_TEST, as the test uses symbols from 'pcm_misc.c'. Fixes: 3e39acf5 ("ALSA: core: Add sound core KUnit test") Signed-off-by:
Ivan Orlov <ivan.orlov0322@gmail.com> Link: https://lore.kernel.org/r/20240201221122.16627-1-ivan.orlov0322@gmail.comSigned-off-by:
-
- 30 Jan, 2024 6 commits
-
-
Takashi Iwai authored
Pull ALSA core kunit test. Signed-off-by: -
Ivan Orlov authored
At the moment, we have a decent amount of integration tests (selftests) covering different aspects of the sound subsystem. However, a lot of of sound-related in-kernel functions remains uncovered. This patch introduces the KUnit test for the core part of the sound subsystem. It includes 10 test cases: - Coverage of the format-related inline functions from 'pcm.h' header file: snd_pcm_format_physical_width, snd_pcm_format_width, snd_pcm_format_signed, test_format_endianness - Coverage of the available bytes counting functions from 'pcm.h' header: snd_pcm_capture_avail, snd_pcm_playback_avail - Coverage of functions from pcm_misc: snd_pcm_format_set_silence, snd_pcm_format_name - Coverage of card-related functions from init.c: snd_card_set_id, snd_component_add This patch depends on the previous patches in this patch series as they contain fix for the bug, which was found during the test development. Without them, the test doesn't pass. Signed-off-by:
-
Ivan Orlov authored
Fix snd_pcm_format_name so it won't return NULL-pointer in case if it can't find the format in the 'snd_pcm_format_names' list. Return "Unknown" instead, as it is done if the number passed to the function is larger than a list size. Signed-off-by:
-
Ivan Orlov authored
Add 4 missing formats to 'snd_pcm_format_names' array in order to be able to get their names with 'snd_pcm_format_name' function. Signed-off-by:
-
Chhayly Leang authored
Adds sound support for ASUS Zenbook UM3402YAR with missing DSD Signed-off-by:
Chhayly Leang <clw.leang@gmail.com> Link: https://lore.kernel.org/r/20240126080912.87422-1-clw.leang@gmail.comSigned-off-by:
-
Kenzo Gomez authored
Add new model entry into configuration table. Signed-off-by:
Kenzo Gomez <kenzo.sgomez@gmail.com> Link: https://lore.kernel.org/r/20240127164621.26431-1-kenzo.sgomez@gmail.comSigned-off-by:
-
- 29 Jan, 2024 5 commits
-
-
Alexander Tsoy authored
Many devices with a single alternate setting do not have a Valid Alternate Setting Control and validation performed by validate_sample_rate_table_v2v3() doesn't work on them and is not really needed. So check the presense of control before sending altsetting validation requests. MOTU Microbook IIc is suffering the most without this check. It takes up to 40 seconds to bootup due to how slow it switches sampling rates: [ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60 [ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2659.164829] usb 3-2: Product: MicroBook IIc [ 2659.164830] usb 3-2: Manufacturer: MOTU [ 2659.166204] usb 3-2: Found last interface = 3 [ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug [ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3 [ 2679.322321] usb 3-2: Creating new data endpoint #3 [ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1 [ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110 [ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug [ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84 [ 2694.444721] usb 3-2: Creating new data endpoint #84 [ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1 Signed-off-by:
Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.meSigned-off-by:
-
Alexander Tsoy authored
This reverts commit 67794f88. We need to explicitly set up the clock selector to workaround a problem with the Behringer mixers. This was originally done in d2e8f641 ("ALSA: usb-audio: Explicitly set up the clock selector") The problem with MOTU M Series mentioned in commit message was fixed in a different way by checking control capabilities of clock selectors. Signed-off-by:
-
Luka Guzenko authored
This HP Laptop uses ALC236 codec with COEF 0x07 controlling the mute LED. Enable existing quirk for this device. Signed-off-by:
Luka Guzenko <l.guzenko@web.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240128155704.2333812-1-l.guzenko@web.deSigned-off-by:
-
David Senoner authored
If you connect an external headset/microphone to the 3.5mm jack on the Acer Swift 1 SF114-32 it does not recognize the microphone. This fixes that and gives the user the ability to choose between internal and headset mic. Signed-off-by:
David Senoner <seda18@rolmail.net> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240126155626.2304465-1-seda18@rolmail.netSigned-off-by:
-
Takashi Sakamoto authored
Mark of the Unicorn released 896 mk3 FireWire in 2008 as part of the third generation of its FireWire series. In 2011, 896 mk3 hybrid was released to support USB protocol. It supports sampling transfer frequency up to 192.0 kHz. The packet format differs depending on both of current sampling transfer frequency and the type of signal in optical interfaces. The model supports transmission of PCM frames as well as MIDI messages. The 896 mk3 FireWire consists of below ICs: * Texas Instruments TSB41AB2 * Xilinx Spartan-3A FPGA, XC3S500E * Texas Instruments TMS320C6722 * Microchip (Atmel) AT91SAM SAM7S256 It supports sampling transfer frequency up to 192.0 kHz. The packet format differs depending on both of current sampling transfer frequency and the type of signal in two pairs of optical interfaces. The model supports transmission of PCM frames, while has no port for MIDi messages. The model supports command mechanism to configure internal DSP. Hardware meter information is available in the first 2 chunks of each data block of tx packet. This commit adds support for it. The 896 mk3 FireWire is just tested, but the 896 mk3 Hybrid is not yet. $ config-rom-pretty-printer < motu-896mk3fw.img ROM header and bus information block ----------------------------------------------------------------- 1024 04100ce1 bus_info_length 4, crc_length 16, crc 3297 1028 31333934 bus_name "1394" 1032 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256) 1036 0001f200 company_id 0001f2 | 1040 00093add device_id 0000604893 | EUI-64 0547556791237341 root directory ----------------------------------------------------------------- 1044 0004ef04 directory_length 4, crc 61188 1048 030001f2 vendor 1052 0c0083c0 node capabilities: per IEEE 1394 1056 d1000002 --> unit directory at 1064 1060 8d000005 --> eui-64 leaf at 1080 unit directory at 1064 ----------------------------------------------------------------- 1064 0003998d directory_length 3, crc 39309 1068 120001f2 specifier id 1072 13000017 version 1076 17101800 model eui-64 leaf at 1080 ----------------------------------------------------------------- 1080 0002cc82 leaf_length 2, crc 52354 1084 0001f200 company_id 0001f2 | 1088 00093add device_id 0000604893 | EUI-64 0547556791237341 $ config-rom-pretty-printer < motu-896mk3hybrid.img ROM header and bus information block ----------------------------------------------------------------- 1024 04103cbe bus_info_length 4, crc_length 16, crc 15550 1028 31333934 bus_name "1394" 1032 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256) 1036 0001f200 company_id 0001f2 | 1040 000ae601 device_id 0000714241 | EUI-64 0547556791346689 root directory ----------------------------------------------------------------- 1044 0004ef04 directory_length 4, crc 61188 1048 030001f2 vendor 1052 0c0083c0 node capabilities: per IEEE 1394 1056 d1000002 --> unit directory at 1064 1060 8d000005 --> eui-64 leaf at 1080 unit directory at 1064 ----------------------------------------------------------------- 1064 000394ac directory_length 3, crc 38060 1068 120001f2 specifier id 1072 13000037 version 1076 17102800 model eui-64 leaf at 1080 ----------------------------------------------------------------- 1080 0002cf69 leaf_length 2, crc 53097 1084 0001f200 company_id 0001f2 | 1088 000ae601 device_id 0000714241 | EUI-64 0547556791346689 Signed-off-by:Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20240129022711.254383-1-o-takashi@sakamocchi.jpSigned-off-by:
-
- 28 Jan, 2024 4 commits
-
-
Stefan Binding authored
These models use 2 or 4 CS35L41 amps with HDA using I2C or SPI. Some models have _DSD support inside cs35l41_hda_property.c. Signed-off-by:
-
Stefan Binding authored
Laptops 103C8C66, 103C8C67, 103C8C68, 103C8C6A use a dual speaker id system where each speaker has its own speaker id. The generic configuration table doesn't support this, so it needs its own function. Signed-off-by:
-
Stefan Binding authored
Add new model entries into configuration table. Signed-off-by:
-
Stefan Binding authored
Current method to set Channel Index when the system is missing _DSD assumes that the channels alternate, which is not guaranteed. Instead use the same methodology as the main driver does when _DSD exists. Fixes: 8c4c216d ("ALSA: hda: cs35l41: Add config table to support many laptops without _DSD") Signed-off-by:
-
- 26 Jan, 2024 1 commit
-
-
Alexander Tsoy authored
Clock selector control might be read-only. Add corresponding checks to prevent sending control requests that would fail. Signed-off-by:
-
- 25 Jan, 2024 3 commits
-
-
Simon Trimmer authored
Add quirks for two HP G11 laptops that use a Realtek HDA codec combined with four CS35L56 amplifiers using SPI. The CS35L56 driver uses the component binding interface, so uses the same setup code as the CS35L41 quirks. Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20240125123301.41692-1-rf@opensource.cirrus.comSigned-off-by:
-
Richard Fitzgerald authored
Move the generic parts of the hda_component implementation into a new hda_component module. This will allow other HDA codecs to add support for the component binding API without duplicating all the code. Signed-off-by:
Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/20240124112607.77614-3-rf@opensource.cirrus.comSigned-off-by:
-
Richard Fitzgerald authored
Slightly re-work the code around cs35l41_generic_fixup() and the component binding search so that it can be re-used for other amps that use the component binding mechanism. The match string is stored in struct scodec_dev_name instead of hardcoding it in the match function. The tas2781 does not use the amp index as part of the driver name match. But its match format string does not include a field for the index, so snprintf() would safely ignore the p->index argument. Because of this there is no need for a special match function for this case, the CS35L41 code can be re-used. Signed-off-by:
-
- 24 Jan, 2024 6 commits
-
-
Takashi Iwai authored
The quirk table entries should be put in the USB ID order, but some entries have been put in random places. Re-sort them. Fixes: bf990c10 ("ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue") Fixes: fd28941c ("ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless") Fixes: dfd5fe19 ("ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum610 Wireless") Fixes: 4a63e68a ("ALSA: usb-audio: Fix microphone sound on Nexigo webcam.") Fixes: 7822baa8 ("ALSA: usb-audio: add quirk for RODE NT-USB+") Fixes: 4fb7c24f ("ALSA: usb-audio: Add quirk for Fiero SC-01") Fixes: 2307a0e1 ("ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)") Link: https://lore.kernel.org/r/20240124155307.16996-1-tiwai@suse.deSigned-off-by:
-
Sean Young authored
The RODE NT-USB+ is marketed as a professional usb microphone, however the usb audio interface is a mess: [ 1.130977] usb 1-5: new full-speed USB device number 2 using xhci_hcd [ 1.503906] usb 1-5: config 1 has an invalid interface number: 5 but max is 4 [ 1.503912] usb 1-5: config 1 has no interface number 4 [ 1.519689] usb 1-5: New USB device found, idVendor=19f7, idProduct=0035, bcdDevice= 1.09 [ 1.519695] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.519697] usb 1-5: Product: RØDE NT-USB+ [ 1.519699] usb 1-5: Manufacturer: RØDE [ 1.519700] usb 1-5: SerialNumber: 1D773A1A [ 8.327495] usb 1-5: 1:1: cannot get freq at ep 0x82 [ 8.344500] usb 1-5: 1:2: cannot get freq at ep 0x82 [ 8.365499] usb 1-5: 2:1: cannot get freq at ep 0x2 Add QUIRK_FLAG_GET_SAMPLE_RATE to work around the broken sample rate get. I have asked Rode support to fix it, but they show no interest. Signed-off-by:
Sean Young <sean@mess.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240124151524.23314-1-sean@mess.orgSigned-off-by:
-
Alexander Tsoy authored
Audio control requests that sets sampling frequency sometimes fail on this card. Adding delay between control messages eliminates that problem. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217601 Cc: <stable@vger.kernel.org> Signed-off-by:
-
Li RongQing authored
virtqueue_enable_cb() will call virtqueue_poll() which will check if queue is broken at beginning, so remove the virtqueue_is_broken() call Signed-off-by:
Li RongQing <lirongqing@baidu.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Link: https://lore.kernel.org/r/20240124120834.49410-1-lirongqing@baidu.comSigned-off-by:
-
Jacob Siverskog authored
fix typo in midi fallback log. Signed-off-by:
Jacob Siverskog <jacob@teenage.engineering> Fixes: ff49d1df ("ALSA: usb-audio: USB MIDI 2.0 UMP support") Link: https://lore.kernel.org/r/20240124101827.35433-1-jacob@teenage.engineeringSigned-off-by:
-
Kailang Yang authored
SSID 0x0c0d platform. It can't mute speaker when HP plugged. This patch add quirk to fill speaker pin verbtable. And disable speaker passthrough. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/38b82976a875451d833d514cee34ff6a@realtek.comSigned-off-by:
-
- 23 Jan, 2024 1 commit
-
-
Alexander Tsoy authored
Since commit 086b957c ("ALSA: usb-audio: Skip the clock selector inquiry for single connections") we are already skipping clock selector inquiry if only one clock source is connected, but we are still sending a set request. Lets skip that too. This should fix errors when setting a sample rate on devices that don't have any controls present within the clock selector. An example of such device is the new revision of MOTU M Series (07fd:000b): AudioControl Interface Descriptor: bLength 8 bDescriptorType 36 bDescriptorSubtype 11 (CLOCK_SELECTOR) bClockID 1 bNrInPins 1 baCSourceID(0) 2 bmControls 0x00 iClockSelector 0 Perhaps we also should check if clock selectors are readable and writeable like we already do for clock sources, but this is out of scope of this patch. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217601Signed-off-by:
-
