- 25 Jun, 2015 34 commits
-
-
Kirill A. Shutemov authored
On mlock(2) we trigger COW on private writable VMA to avoid faults in future. mm/gup.c: 840 long populate_vma_page_range(struct vm_area_struct *vma, 841 unsigned long start, unsigned long end, int *nonblocking) 842 { ... 855 * We want to touch writable mappings with a write fault in order 856 * to break COW, except for shared mappings because these don't COW 857 * and we would not want to dirty them for nothing. 858 */ 859 if ((vma->vm_flags & (VM_WRITE | VM_SHARED)) == VM_WRITE) 860 gup_flags |= FOLL_WRITE; But we miss this case when we make VM_LOCKED VMA writeable via mprotect(2). The test case: #define _GNU_SOURCE #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #include <sys/resource.h> #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> #define PAGE_SIZE 4096 int main(int argc, char **argv) { struct rusage usage; long before; char *p; int fd; /* Create a file and populate first page of page cache */ fd = open("/tmp", O_TMPFILE | O_RDWR, S_IRUSR | S_IWUSR); write(fd, "1", 1); /* Create a *read-only* *private* mapping of the file */ p = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_PRIVATE, fd, 0); /* * Since the mapping is read-only, mlock() will populate the mapping * with PTEs pointing to page cache without triggering COW. */ mlock(p, PAGE_SIZE); /* * Mapping became read-write, but it's still populated with PTEs * pointing to page cache. */ mprotect(p, PAGE_SIZE, PROT_READ | PROT_WRITE); getrusage(RUSAGE_SELF, &usage); before = usage.ru_minflt; /* Trigger COW: fault in mlock()ed VMA. */ *p = 1; getrusage(RUSAGE_SELF, &usage); printf("faults: %ld\n", usage.ru_minflt - before); return 0; } $ ./test faults: 1 Let's fix it by triggering populating of VMA in mprotect_fixup() on this condition. We don't care about population error as we don't in other similar cases i.e. mremap. [akpm@linux-foundation.org: tweak comment text] Signed-off-by:Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Kosina authored
khugepaged_do_scan() checks in every iteration whether freezing(current) is true, and in such case breaks out of the loop, which causes try_to_freeze() to be called immediately afterwards in khugepaged_wait_work(). If nothing else, this causes unnecessary freezing(current) test, and also makes the way khugepaged enters freezer a bit less obvious than necessary. Let's just try to freeze directly, instead of splitting it into two (directly adjacent) phases. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Andi Kleen authored
All the items mentioned here have been either addressed, or were not really needed. So just remove the comment. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Andi Kleen authored
Here's another comment fix for hwpoison. It describes the "guiding principle" on when to add new memory error recovery code. Signed-off-by:
-
Rasmus Villemoes authored
The first is a keyboard-off-by-one, the other two the ordinary mathy kind. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
-
Daniel Sanders authored
This patch moves the initialization of the size_index table slightly earlier so that the first few kmem_cache_node's can be safely allocated when KMALLOC_MIN_SIZE is large. There are currently two ways to generate indices into kmalloc_caches (via kmalloc_index() and via the size_index table in slab_common.c) and on some arches (possibly only MIPS) they potentially disagree with each other until create_kmalloc_caches() has been called. It seems that the intention is that the size_index table is a fast equivalent to kmalloc_index() and that create_kmalloc_caches() patches the table to return the correct value for the cases where kmalloc_index()'s if-statements apply. The failing sequence was: * kmalloc_caches contains NULL elements * kmem_cache_init initialises the element that 'struct kmem_cache_node' will be allocated to. For 32-bit Mips, this is a 56-byte struct and kmalloc_index returns KMALLOC_SHIFT_LOW (7). * init_list is called which calls kmalloc_node to allocate a 'struct kmem_cache_node'. * kmalloc_slab selects the kmem_caches element using size_index[size_index_elem(size)]. For MIPS, size is 56, and the expression returns 6. * This element of kmalloc_caches is NULL and allocation fails. * If it had not already failed, it would have called create_kmalloc_caches() at this point which would have changed size_index[size_index_elem(size)] to 7. I don't believe the bug to be LLVM specific but GCC doesn't normally encounter the problem. I haven't been able to identify exactly what GCC is doing better (probably inlining) but it seems that GCC is managing to optimize to the point that it eliminates the problematic allocations. This theory is supported by the fact that GCC can be made to fail in the same way by changing inline, __inline, __inline__, and __always_inline in include/linux/compiler-gcc.h such that they don't actually inline things. Signed-off-by:
Daniel Sanders <daniel.sanders@imgtec.com> Acked-by:
Pekka Enberg <penberg@kernel.org> Acked-by:
-
Gavin Guo authored
The slub_debug=PU,kmalloc-xx cannot work because in the create_kmalloc_caches() the s->name is created after the create_kmalloc_cache() is called. The name is NULL in the create_kmalloc_cache() so the kmem_cache_flags() would not set the slub_debug flags to the s->flags. The fix here set up a kmalloc_names string array for the initialization purpose and delete the dynamic name creation of kmalloc_caches. [akpm@linux-foundation.org: s/kmalloc_names/kmalloc_info/, tweak comment text] Signed-off-by:
Gavin Guo <gavin.guo@canonical.com> Acked-by:
-
Akinobu Mita authored
This replaces the plain loop over the sglist array with for_each_sg() macro which consists of sg_next() function calls. Since xtensa doesn't select ARCH_HAS_SG_CHAIN, it is not necessary to use for_each_sg() in order to loop over each sg element. But this can help find problems with drivers that do not properly initialize their sg tables when CONFIG_DEBUG_SG is enabled. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Chris Metcalf authored
Allowing watchdog threads to be parked means that we now have the opportunity of actually seeing persistent parked threads in the output of /proc/<pid>/stat and /proc/<pid>/status. The existing code reported such threads as "Running", which is kind-of true if you think of the case where we park them as part of taking cpus offline. But if we allow parking them indefinitely, "Running" is pretty misleading, so we report them as "Sleeping" instead. We could simply report them with a new string, "Parked", but it feels like it's a bit risky for userspace to see unexpected new values; the output is already documented in Documentation/filesystems/proc.txt, and it seems like a mistake to change that lightly. The scheduler does report parked tasks with a "P" in debugging output from sched_show_task() or dump_cpu_task(), but that's a different API. Similarly, the trace_ctxwake_* routines report a "P" for parked tasks, but again, different API. This change seemed slightly cleaner than updating the task_state_array to have additional rows. TASK_DEAD should be subsumed by the exit_state bits; TASK_WAKEKILL is just a modifier; and TASK_WAKING can very reasonably be reported as "Running" (as it is now). Only TASK_PARKED shows up with unreasonable output here. Signed-off-by:
Chris Metcalf <cmetcalf@ezchip.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
-
Chris Metcalf authored
Change the default behavior of watchdog so it only runs on the housekeeping cores when nohz_full is enabled at build and boot time. Allow modifying the set of cores the watchdog is currently running on with a new kernel.watchdog_cpumask sysctl. In the current system, the watchdog subsystem runs a periodic timer that schedules the watchdog kthread to run. However, nohz_full cores are designed to allow userspace application code running on those cores to have 100% access to the CPU. So the watchdog system prevents the nohz_full application code from being able to run the way it wants to, thus the motivation to suppress the watchdog on nohz_full cores, which this patchset provides by default. However, if we disable the watchdog globally, then the housekeeping cores can't benefit from the watchdog functionality. So we allow disabling it only on some cores. See Documentation/lockup-watchdogs.txt for more information. [jhubbard@nvidia.com: fix a watchdog crash in some configurations] Signed-off-by:
Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
-
Chris Metcalf authored
This patch series allows the watchdog to run by default only on the housekeeping cores when nohz_full is in effect; this seems to be a good compromise short of turning it off completely (since the nohz_full cores can't tolerate a watchdog). To provide customizability, we add /proc/sys/kernel/watchdog_cpumask so that the set of cores running the watchdog can be tuned to different values after bootup. To implement this customizability, we add a new smpboot_update_cpumask_percpu_thread() API to the smpboot_thread subsystem that lets us park or unpark "unwanted" threads. And now that threads can be parked for long periods of time, we tweak the /proc/<pid>/stat and /proc/<pid>/status code so parked threads aren't reported as running, which is otherwise confusing. This patch (of 3): This change allows some cores to be excluded from running the smp_hotplug_thread tasks. The following commit to update kernel/watchdog.c to use this functionality is the motivating example, and more information on the motivation is provided there. A new smp_hotplug_thread field is introduced, "cpumask", which is cpumask field managed by the smpboot subsystem that indicates whether or not the given smp_hotplug_thread should run on that core; the cpumask is checked when deciding whether to unpark the thread. To limit the cpumask to less than cpu_possible, you must call smpboot_update_cpumask_percpu_thread() after registering. Signed-off-by:
-
Akinobu Mita authored
This replaces the plain loop over the sglist array with for_each_sg() macro which consists of sg_next() function calls. Since sparc does select ARCH_HAS_SG_CHAIN, it is necessary to use for_each_sg() in order to loop over each sg element. This also help find problems with drivers that do not properly initialize their sg tables when CONFIG_DEBUG_SG is enabled. Signed-off-by:
-
Akinobu Mita authored
This replaces the plain loop over the sglist array with for_each_sg() macro which consists of sg_next() function calls. Since parisc doesn't select ARCH_HAS_SG_CHAIN, it is not necessary to use for_each_sg() in order to loop over each sg element. But this can help find problems with drivers that do not properly initialize their sg tables when CONFIG_DEBUG_SG is enabled. Signed-off-by:
-
Joseph Qi authored
Some functions are only used locally, so mark them as static. Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Fabian Frederick authored
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Fabian Frederick authored
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by:
-
Fabian Frederick authored
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by:
-
Joseph Qi authored
contig_blocks gotten from ocfs2_extent_map_get_blocks cannot be compared with clusters_to_alloc. So convert it to clusters first. Signed-off-by:
Weiwei Wang <wangww631@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Xue jiufei authored
ocfs2_abort_trigger() use bh->b_assoc_map to get sb. But there's no function to set bh->b_assoc_map in ocfs2, it will trigger NULL pointer dereference while calling this function. We can get sb from bh->b_bdev->bd_super instead of b_assoc_map. [akpm@linux-foundation.org: update comment, per Joseph] Signed-off-by:
joyce.xue <xuejiufei@huawei.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
alex chen authored
Signed-off-by:
Alex Chen <alex.chen@huawei.com> Reviewed-by:
-
WeiWei Wang authored
In ocfs2 direct read/write, OCFS2_IOCB_SEM lock type is used to protect inode->i_alloc_sem rw semaphore lock in the earlier kernel version. However, in the latest kernel, inode->i_alloc_sem rw semaphore lock is not used at all, so OCFS2_IOCB_SEM lock type needs to be removed. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Joseph Qi authored
jbd2_journal_dirty_metadata may fail. Currently it cannot take care of non zero return value and just BUG in ocfs2_journal_dirty. This patch is aborting the handle and journal instead of BUG. Signed-off-by:
-
Xue jiufei authored
ocfs2_rotate_tree_left() calls __ocfs2_rotate_tree_left() for left rotation while non-rightmost path containing an empty extent in the leaf block. __ocfs2_rotate_tree_left() returns -EAGAIN if right subtree having an empty extent and pass the empty_extent_path to caller. The caller ocfs2_rotate_tree_left() will restart rotation from the returned path. It will trigger the BUG_ON(!ocfs2_is_empty_extent) when the et on disk is as follows: eb0 is the leaf block of path(say path_a) passed to ocfs2_rotate_tree_left, which has an empty rec[0]. eb1 is the leaf block of path(say path_b) that just right to path_a, which has no empty record. eb2 is the leaf block of path(say path_c) that just right to path_b, which has an empty rec[0]. And path_c is also the rightmost path. Now we want to remove the empty rec[0] in eb0: ocfs2_rotate_tree_left: -> call __ocfs2_rotate_tree_left with path_a as its input *path* -> call ocfs2_rotate_subtree_left with path_a as its input *left_path* and path_b as its input *right_path*. it will move rec[0] in eb1 to eb0, and rec[0] in eb0 is not empty now. -> continue to call ocfs2_rotate_subtree_left with path_b as its input *left_path* and path_c as its input *right_path*, and return -EAGAIN because eb2 has an empty rec[0] -> call __ocfs2_rotate_tree_left with path_c as it input, rotate all records in eb2 to left and return 0. -> call __ocfs2_rotate_tree_left with path_a as its input, and triggers the BUG_ON(!ocfs2_is_empty_extent) as the rec[0] in eb0 is not empty. So the BUG_ON() should be removed and return 0 if rec[0] is no longer an empty extent. Signed-off-by: -
Xue jiufei authored
ocfs2_figure_merge_contig_type() still returns CONTIG_NONE when some error occurs which will cause an unpredictable error. So return a proper errno when ocfs2_figure_merge_contig_type() fails. Signed-off-by:
-
Joseph Qi authored
__dlm_wait_on_lockres_flags_set() is declared but not implemented and used. So remove it. Signed-off-by:
-
Daeseok Youn authored
The use of 'status' in __ocfs2_add_entry() can return wrong value. Some functions' return value in __ocfs2_add_entry(), i.e ocfs2_journal_access_di() is saved to 'status'. But 'status' is not used in 'bail' label for returning result of __ocfs2_add_entry(). So use retval instead of status. Signed-off-by:
Daeseok Youn <daeseok.youn@gmail.com> Reviewed-by:
-
Joseph Qi authored
Once dio crashed it will leave an entry in orphan dir. And orphan scan will take care of the clean up. There is a tiny race case that the same entry will be truncated twice and then trigger the BUG in ocfs2_del_inode_from_orphan. Signed-off-by:
-
Andrew Morton authored
raw_smp_processor_id() is the means of avoiding the runtime preemptibility check. [akpm@linux-foundation.org: fix printk warning] Cc: Joe Perches <joe@perches.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Joe Perches authored
Using a function for __mlog_printk instead of a macro reduces the object size of built-in.o by about 190KB, or ~18% overall (x86-64 defconfig with all ocfs2 options) $ size fs/ocfs2/built-in.o* text data bss dec hex filename 870954 118471 134408 1123833 1125f9 fs/ocfs2/built-in.o,new 1064081 118071 134408 1316560 1416d0 fs/ocfs2/built-in.o.old Miscellanea: - Move the used-once __mlog_cpu_guess statement expression macro to the masklog.c file above the use in __mlog_printk function - Simplify the mlog macro moving the and/or logic and level code into __mlog_printk [akpm@linux-foundation.org: export __mlog_printk() to other ocfs2 modules] Signed-off-by:Joe Perches <joe@perches.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Fabian Frederick authored
config_item_init() is only used in item.c Signed-off-by:
-
Pekka Enberg authored
Use kvfree() instead of open-coding it. Signed-off-by:
-
Nikolay Borisov authored
should_send_event is no longer part of struct fsnotify_ops, so remove it. Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Akinobu Mita authored
This replaces the plain loop over the sglist array with for_each_sg() macro which consists of sg_next() function calls. Since powerpc does select ARCH_HAS_SG_CHAIN, it is necessary to use for_each_sg() in order to loop over each sg element. This also help find problems with drivers that do not properly initialize their sg tables when CONFIG_DEBUG_SG is enabled. Signed-off-by:
-
Akinobu Mita authored
This replaces the plain loop over the sglist array with for_each_sg() macro which consists of sg_next() function calls. Since metag doesn't select ARCH_HAS_SG_CHAIN, it is not necessary to use for_each_sg() in order to loop over each sg element. But this can help find problems with drivers that do not properly initialize their sg tables when CONFIG_DEBUG_SG is enabled. Signed-off-by:
-
- 24 Jun, 2015 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 updates from Catalin Marinas: "Mostly refactoring/clean-up: - CPU ops and PSCI (Power State Coordination Interface) refactoring following the merging of the arm64 ACPI support, together with handling of Trusted (secure) OS instances - Using fixmap for permanent FDT mapping, removing the initial dtb placement requirements (within 512MB from the start of the kernel image). This required moving the FDT self reservation out of the memreserve processing - Idmap (1:1 mapping used for MMU on/off) handling clean-up - Removing flush_cache_all() - not safe on ARM unless the MMU is off. Last stages of CPU power down/up are handled by firmware already - "Alternatives" (run-time code patching) refactoring and support for immediate branch patching, GICv3 CPU interface access - User faults handling clean-up And some fixes: - Fix for VDSO building with broken ELF toolchains - Fix another case of init_mm.pgd usage for user mappings (during ASID roll-over broadcasting) - Fix for FPSIMD reloading after CPU hotplug - Fix for missing syscall trace exit - Workaround for .inst asm bug - Compat fix for switching the user tls tpidr_el0 register" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (42 commits) arm64: use private ratelimit state along with show_unhandled_signals arm64: show unhandled SP/PC alignment faults arm64: vdso: work-around broken ELF toolchains in Makefile arm64: kernel: rename __cpu_suspend to keep it aligned with arm arm64: compat: print compat_sp instead of sp arm64: mm: Fix freeing of the wrong memmap entries with !SPARSEMEM_VMEMMAP arm64: entry: fix context tracking for el0_sp_pc arm64: defconfig: enable memtest arm64: mm: remove reference to tlb.S from comment block arm64: Do not attempt to use init_mm in reset_context() arm64: KVM: Switch vgic save/restore to alternative_insn arm64: alternative: Introduce feature for GICv3 CPU interface arm64: psci: fix !CONFIG_HOTPLUG_CPU build warning arm64: fix bug for reloading FPSIMD state after CPU hotplug. arm64: kernel thread don't need to save fpsimd context. arm64: fix missing syscall trace exit arm64: alternative: Work around .inst assembler bugs arm64: alternative: Merge alternative-asm.h into alternative.h arm64: alternative: Allow immediate branch as alternative instruction arm64: Rework alternate sequence for ARM erratum 845719 ... -
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull first batch of KVM updates from Paolo Bonzini: "The bulk of the changes here is for x86. And for once it's not for silicon that no one owns: these are really new features for everyone. Details: - ARM: several features are in progress but missed the 4.2 deadline. So here is just a smattering of bug fixes, plus enabling the VFIO integration. - s390: Some fixes/refactorings/optimizations, plus support for 2GB pages. - x86: * host and guest support for marking kvmclock as a stable scheduler clock. * support for write combining. * support for system management mode, needed for secure boot in guests. * a bunch of cleanups required for the above * support for virtualized performance counters on AMD * legacy PCI device assignment is deprecated and defaults to "n" in Kconfig; VFIO replaces it On top of this there are also bug fixes and eager FPU context loading for FPU-heavy guests. - Common code: Support for multiple address spaces; for now it is used only for x86 SMM but the s390 folks also have plans" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits) KVM: s390: clear floating interrupt bitmap and parameters KVM: x86/vPMU: Enable PMU handling for AMD PERFCTRn and EVNTSELn MSRs KVM: x86/vPMU: Implement AMD vPMU code for KVM KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch KVM: x86/vPMU: introduce kvm_pmu_msr_idx_to_pmc KVM: x86/vPMU: reorder PMU functions KVM: x86/vPMU: whitespace and stylistic adjustments in PMU code KVM: x86/vPMU: use the new macros to go between PMC, PMU and VCPU KVM: x86/vPMU: introduce pmu.h header KVM: x86/vPMU: rename a few PMU functions KVM: MTRR: do not map huge page for non-consistent range KVM: MTRR: simplify kvm_mtrr_get_guest_memory_type KVM: MTRR: introduce mtrr_for_each_mem_type KVM: MTRR: introduce fixed_mtrr_addr_* functions KVM: MTRR: sort variable MTRRs KVM: MTRR: introduce var_mtrr_range KVM: MTRR: introduce fixed_mtrr_segment table KVM: MTRR: improve kvm_mtrr_get_guest_memory_type KVM: MTRR: do not split 64 bits MSR content KVM: MTRR: clean up mtrr default type ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linuxLinus Torvalds authored
Pull powerpc updates from Michael Ellerman: - disable the 32-bit vdso when building LE, so we can build with a 64-bit only toolchain. - EEH fixes from Gavin & Richard. - enable the sys_kcmp syscall from Laurent. - sysfs control for fastsleep workaround from Shreyas. - expose OPAL events as an irq chip by Alistair. - MSI ops moved to pci_controller_ops by Daniel. - fix for kernel to userspace backtraces for perf from Anton. - merge pseries and pseries_le defconfigs from Cyril. - CXL in-kernel API from Mikey. - OPAL prd driver from Jeremy. - fix for DSCR handling & tests from Anshuman. - Powernv flash mtd driver from Cyril. - dynamic DMA Window support on powernv from Alexey. - LLVM clang fixes & workarounds from Anton. - reworked version of the patch to abort syscalls when transactional. - fix the swap encoding to support 4TB, from Aneesh. - various fixes as usual. - Freescale updates from Scott: Highlights include more 8xx optimizations, an e6500 hugetlb optimization, QMan device tree nodes, t1024/t1023 support, and various fixes and cleanup. * tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits) cxl: Fix typo in debug print cxl: Add CXL_KERNEL_API config option powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma() powerpc/mm: Change the swap encoding in pte. powerpc/mm: PTE_RPN_MAX is not used, remove the same powerpc/tm: Abort syscalls in active transactions powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off powerpc/include: Add opal-prd to installed uapi headers powerpc/powernv: fix construction of opal PRD messages powerpc/powernv: Increase opal-irqchip initcall priority powerpc: Make doorbell check preemption safe powerpc/powernv: pnv_init_idle_states() should only run on powernv macintosh/nvram: Remove as unused powerpc: Don't use gcc specific options on clang powerpc: Don't use -mno-strict-align on clang powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it powerpc: Only use -mabi=altivec if toolchain supports it powerpc: Fix duplicate const clang warning in user access code vfio: powerpc/spapr: Support Dynamic DMA windows vfio: powerpc/spapr: Register memory and define IOMMU v2 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Martin Schwidefsky: "Pretty boring for a merge window pull. One change in behaviour is the patch for dasd driver, the module which provides the diagnose discipline is now loaded automatically. The SCLP code got a nice cleanup, a new global structure replaces a bunch of accessor functions. And a couple of random, small improvements" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: improve handling of hotplug event 0x301 s390/setup: fix DMA_API_DEBUG warnings s390/zcrypt: remove obsolete __constant s390/keyboard: avoid off-by-one when using strnlen_user() s390/sclp: pass timeout as HZ independent value s390/mm: s/specifiation/specification/, s/an specification/a specification/ s390/sclp: Use DECLARE_BITMAP s390/dasd: Enable automatic loading of dasd_diag_mod s390/sclp: move sclp_facilities into "struct sclp" s390/sclp: get rid of sclp_get_mtid() and sclp_get_mtid_max() s390/sclp: unify basic sclp access by exposing "struct sclp" s390/sclp: prepare smp_fill_possible_mask for global "struct sclp"
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull Microblaze updates from Michal Simek: - some PCI fixups - add new MB versions - sparse fixups * tag 'microblaze-4.2-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze/PCI: Remove unnecessary struct pci_dev declaration microblaze/PCI: Remove unnecessary pci_bus_find_capability() declaration microblaze/PCI: Remove unused declarations microblaze: Label local function static microblaze: Add missing release version code
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU updates from Joerg Roedel: "This time with bigger changes than usual: - A new IOMMU driver for the ARM SMMUv3. This IOMMU is pretty different from SMMUv1 and v2 in that it is configured through in-memory structures and not through the MMIO register region. The ARM SMMUv3 also supports IO demand paging for PCI devices with PRI/PASID capabilities, but this is not implemented in the driver yet. - Lots of cleanups and device-tree support for the Exynos IOMMU driver. This is part of the effort to bring Exynos DRM support upstream. - Introduction of default domains into the IOMMU core code. The rationale behind this is to move functionalily out of the IOMMU drivers to common code to get to a unified behavior between different drivers. The patches here introduce a default domain for iommu-groups (isolation groups). A device will now always be attached to a domain, either the default domain or another domain handled by the device driver. The IOMMU drivers have to be modified to make use of that feature. So long the AMD IOMMU driver is converted, with others to follow. - Patches for the Intel VT-d drvier to fix DMAR faults that happen when a kdump kernel boots. When the kdump kernel boots it re-initializes the IOMMU hardware, which destroys all mappings from the crashed kernel. As this happens before the endpoint devices are re-initialized, any in-flight DMA causes a DMAR fault. These faults cause PCI master aborts, which some devices can't handle properly and go into an undefined state, so that the device driver in the kdump kernel fails to initialize them and the dump fails. This is now fixed by copying over the mapping structures (only context tables and interrupt remapping tables) from the old kernel and keep the old mappings in place until the device driver of the new kernel takes over. This emulates the the behavior without an IOMMU to the best degree possible. - A couple of other small fixes and cleanups" * tag 'iommu-updates-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (69 commits) iommu/amd: Handle large pages correctly in free_pagetable iommu/vt-d: Don't disable IR when it was previously enabled iommu/vt-d: Make sure copied over IR entries are not reused iommu/vt-d: Copy IR table from old kernel when in kdump mode iommu/vt-d: Set IRTA in intel_setup_irq_remapping iommu/vt-d: Disable IRQ remapping in intel_prepare_irq_remapping iommu/vt-d: Move QI initializationt to intel_setup_irq_remapping iommu/vt-d: Move EIM detection to intel_prepare_irq_remapping iommu/vt-d: Enable Translation only if it was previously disabled iommu/vt-d: Don't disable translation prior to OS handover iommu/vt-d: Don't copy translation tables if RTT bit needs to be changed iommu/vt-d: Don't do early domain assignment if kdump kernel iommu/vt-d: Allocate si_domain in init_dmars() iommu/vt-d: Mark copied context entries iommu/vt-d: Do not re-use domain-ids from the old kernel iommu/vt-d: Copy translation tables from old kernel iommu/vt-d: Detect pre enabled translation iommu/vt-d: Make root entry visible for hardware right after allocation iommu/vt-d: Init QI before root entry is allocated iommu/vt-d: Cleanup log messages ...
-
