- 05 Oct, 2019 40 commits
-
-
Guoqing Jiang authored
[ Upstream commit 062f5b2a ] When a disk is added to array, the following path is called in mdadm. Manage_subdevs -> sysfs_freeze_array -> Manage_add -> sysfs_set_str(&info, NULL, "sync_action","idle") Then from kernel side, Manage_add invokes the path (add_new_disk -> validate_super = super_1_validate) to set In_sync flag. Since In_sync means "device is in_sync with rest of array", and the new added disk need to resync thread to help the synchronization of data. And md_reap_sync_thread would call spare_active to set In_sync for the new added disk finally. So don't set In_sync if array is in frozen. Signed-off-by:
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guoqing Jiang authored
[ Upstream commit 0d8ed0e9 ] When add one disk to array, the md_reap_sync_thread is responsible to activate the spare and set In_sync flag for the new member in spare_active(). But if raid1 has one member disk A, and disk B is added to the array. Then we offline A before all the datas are synchronized from A to B, obviously B doesn't have the latest data as A, but B is still marked with In_sync flag. So let's not call spare_active under the condition, otherwise B is still showed with 'U' state which is not correct. Signed-off-by:
-
Yufen Yu authored
[ Upstream commit eeba6809 ] When write bio return error, it would be added to conf->retry_list and wait for raid1d thread to retry write and acknowledge badblocks. In narrow_write_error(), the error bio will be split in the unit of badblock shift (such as one sector) and raid1d thread issues them one by one. Until all of the splited bio has finished, raid1d thread can go on processing other things, which is time consuming. But, there is a scene for error handling that is not necessary. When the device has been set faulty, flush_bio_list() may end bios in pending_bio_list with error status. Since these bios has not been issued to the device actually, error handlding to retry write and acknowledge badblocks make no sense. Even without that scene, when the device is faulty, badblocks info can not be written out to the device. Thus, we also no need to handle the error IO. Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit b99286b0 ] The commit d5370f75 ("arm64: prefetch: add alternative pattern for CPUs without a prefetcher") introduced MIDR_IS_CPU_MODEL_RANGE() to be used in has_no_hw_prefetch() with rv_min=0 which generates a compilation warning from GCC, In file included from ./arch/arm64/include/asm/cache.h:8, from ./include/linux/cache.h:6, from ./include/linux/printk.h:9, from ./include/linux/kernel.h:15, from ./include/linux/cpumask.h:10, from arch/arm64/kernel/cpufeature.c:11: arch/arm64/kernel/cpufeature.c: In function 'has_no_hw_prefetch': ./arch/arm64/include/asm/cputype.h:59:26: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] _model == (model) && rv >= (rv_min) && rv <= (rv_max); \ ^~ arch/arm64/kernel/cpufeature.c:889:9: note: in expansion of macro 'MIDR_IS_CPU_MODEL_RANGE' return MIDR_IS_CPU_MODEL_RANGE(midr, MIDR_THUNDERX, ^~~~~~~~~~~~~~~~~~~~~~~ Fix it by converting MIDR_IS_CPU_MODEL_RANGE to a static inline function. Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Kuninori Morimoto authored
[ Upstream commit 06e8f5c8 ] ADG is using clk_get_rate() under atomic context, thus, we might have scheduling issue. To avoid this issue, we need to get/keep clk rate under non atomic context. We need to handle ADG as special device at Renesas Sound driver. From SW point of view, we want to impletent it as rsnd_mod_ops :: prepare, but it makes code just complicate. To avoid complicated code/patch, this patch adds new clk_rate[] array, and keep clk IN rate when rsnd_adg_clk_enable() was called. Reported-by:
Leon Kong <Leon.KONG@cn.bosch.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 8faa1cf6 ] Smatch complains about the cast of a u32 pointer to unsigned long: drivers/edac/altera_edac.c:1878 altr_edac_a10_irq_handler() warn: passing casted pointer '&irq_status' to 'find_first_bit()' This code wouldn't work on a 64 bit big endian system because it would read past the end of &irq_status. [ bp: massage. ] Fixes: 13ab8448 ("EDAC, altera: Add ECC Manager IRQ controller support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Thor Thayer <thor.thayer@linux.intel.com> Cc: James Morse <james.morse@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190624134717.GA1754@mwandaSigned-off-by:
-
chenzefeng authored
[ Upstream commit c5e5c48c ] The function free_module in file kernel/module.c as follow: void free_module(struct module *mod) { ...... module_arch_cleanup(mod); ...... module_arch_freeing_init(mod); ...... } Both module_arch_cleanup and module_arch_freeing_init function would free the mod->arch.init_unw_table, which cause double free. Here, set mod->arch.init_unw_table = NULL after remove the unwind table to avoid double free. Signed-off-by:
chenzefeng <chenzefeng2@huawei.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Ard van Breemen authored
[ Upstream commit 1b34121d ] The Linux kernel assumes that get_endpoint(alts,0) and get_endpoint(alts,1) are eachothers feedback endpoints. To reassure that validity it will test bsynchaddress to comply with that assumption. But if the bsyncaddress is 0 (invalid), it will flag that as a wrong assumption and return an error. Fix: Skip the test if bSynchAddress is 0. Note: those with a valid bSynchAddress should have a code quirck added. Signed-off-by:
Ard van Breemen <ard@kwaak.net> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Vinod Koul authored
[ Upstream commit f7ccc7a3 ] Qcom Socinfo driver can be built as a module, so export these two APIs. Tested-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Vaishali Thakkar <vaishali.thakkar@linaro.org> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit ab1cbdf1 ] The driver needs to check the endpoint types, too, as opposed to the number of endpoints. This also requires moving the check earlier. Reported-by: syzbot+01a77b82edaa374068e1@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Robert Richter authored
[ Upstream commit 3724ace5 ] The grain in EDAC is defined as "minimum granularity for an error report, in bytes". The following calculation of the grain_bits in edac_mc is wrong: grain_bits = fls_long(e->grain) + 1; Where grain_bits is defined as: grain = 1 << grain_bits Example: grain = 8 # 64 bit (8 bytes) grain_bits = fls_long(8) + 1 grain_bits = 4 + 1 = 5 grain = 1 << grain_bits grain = 1 << 5 = 32 Replace it with the correct calculation: grain_bits = fls_long(e->grain - 1); The example gives now: grain_bits = fls_long(8 - 1) grain_bits = fls_long(7) grain_bits = 3 grain = 1 << 3 = 8 Also, check if the hardware reports a reasonable grain != 0 and fallback with a warning to 1 byte granularity otherwise. [ bp: massage a bit. ] Signed-off-by:
Robert Richter <rrichter@marvell.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 2127c01b ] In build_adc_controls(), there is an if statement on line 773 to check whether ak->adc_info is NULL: if (! ak->adc_info || ! ak->adc_info[mixer_ch].switch_name) When ak->adc_info is NULL, it is used on line 792: knew.name = ak->adc_info[mixer_ch].selector_name; Thus, a possible null-pointer dereference may occur. To fix this bug, referring to lines 773 and 774, ak->adc_info and ak->adc_info[mixer_ch].selector_name are checked before being used. This bug is found by a static analysis tool STCheck written by us. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit dd65f7e1 ] The last fallback of CORB/RIRB communication error recovery is to turn on the single command mode, and this last resort usually means that something is really screwed up. Instead of a normal dev_err(), show the error more clearly with dev_WARN() with the caller stack trace. Also, show the bus-reset fallback also as an error, too. Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 2640da4c ] If the APIC was already enabled on entry of setup_local_APIC() then disabling it soft via the SPIV register makes a lot of sense. That masks all LVT entries and brings it into a well defined state. Otherwise previously enabled LVTs which are not touched in the setup function stay unmasked and might surprise the just booting kernel. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190722105219.068290579@linutronix.deSigned-off-by:
-
Grzegorz Halat authored
[ Upstream commit 747d5a1b ] A reboot request sends an IPI via the reboot vector and waits for all other CPUs to stop. If one or more CPUs are in critical regions with interrupts disabled then the IPI is not handled on those CPUs and the shutdown hangs if native_stop_other_cpus() is called with the wait argument set. Such a situation can happen when one CPU was stopped within a lock held section and another CPU is trying to acquire that lock with interrupts disabled. There are other scenarios which can cause such a lockup as well. In theory the shutdown should be attempted by an NMI IPI after the timeout period elapsed. Though the wait loop after sending the reboot vector IPI prevents this. It checks the wait request argument and the timeout. If wait is set, which is true for sys_reboot() then it won't fall through to the NMI shutdown method after the timeout period has finished. This was an oversight when the NMI shutdown mechanism was added to handle the 'reboot IPI is not working' situation. The mechanism was added to deal with stuck panic shutdowns, which do not have the wait request set, so the 'wait request' case was probably not considered. Remove the wait check from the post reboot vector IPI wait loop and enforce that the wait loop in the NMI fallback path is invoked even if NMI IPIs are disabled or the registration of the NMI handler fails. That second wait loop will then hang if not all CPUs shutdown and the wait argument is set. [ tglx: Avoid the hard to parse line break in the NMI fallback path, add comments and massage the changelog ] Fixes: 7d007d21 ("x86/reboot: Use NMI to assist in shutting down if IRQ fails") Signed-off-by:
Grzegorz Halat <ghalat@redhat.com> Signed-off-by:
-
Juri Lelli authored
[ Upstream commit 59d06cea ] If a task happens to be throttled while the CPU it was running on gets hotplugged off, the bandwidth associated with the task is not correctly migrated with it when the replenishment timer fires (offline_migration). Fix things up, for this_bw, running_bw and total_bw, when replenishment timer fires and task is migrated (dl_task_offline_migration()). Tested-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by:
Juri Lelli <juri.lelli@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit cc8bf191 ] In course of developing shorthand based IPI support issues with the function which tries to clear eventually pending ISR bits in the local APIC were observed. 1) O-day testing triggered the WARN_ON() in apic_pending_intr_clear(). This warning is emitted when the function fails to clear pending ISR bits or observes pending IRR bits which are not delivered to the CPU after the stale ISR bit(s) are ACK'ed. Unfortunately the function only emits a WARN_ON() and fails to dump the IRR/ISR content. That's useless for debugging. Feng added spot on debug printk's which revealed that the stale IRR bit belonged to the APIC timer interrupt vector, but adding ad hoc debug code does not help with sporadic failures in the field. Rework the loop so the full IRR/ISR contents are saved and on failure dumped. 2) The loop termination logic is interesting at best. If the machine has no TSC or cpu_khz is not known yet it tries 1 million times to ack stale IRR/ISR bits. What? With TSC it uses the TSC to calculate the loop termination. It takes a timestamp at entry and terminates the loop when: (rdtsc() - start_timestamp) >= (cpu_hkz << 10) That's roughly one second. Both methods are problematic. The APIC has 256 vectors, which means that in theory max. 256 IRR/ISR bits can be set. In practice this is impossible and the chance that more than a few bits are set is close to zero. With the pure loop based approach the 1 million retries are complete overkill. With TSC this can terminate too early in a guest which is running on a heavily loaded host even with only a couple of IRR/ISR bits set. The reason is that after acknowledging the highest priority ISR bit, pending IRRs must get serviced first before the next round of acknowledge can take place as the APIC (real and virtualized) does not honour EOI without a preceeding interrupt on the CPU. And every APIC read/write takes a VMEXIT if the APIC is virtualized. While trying to reproduce the issue 0-day reported it was observed that the guest was scheduled out long enough under heavy load that it terminated after 8 iterations. Make the loop terminate after 512 iterations. That's plenty enough in any case and does not take endless time to complete. Signed-off-by:
-
Juri Lelli authored
[ Upstream commit a07db5c0 ] On !CONFIG_RT_GROUP_SCHED configurations it is currently not possible to move RT tasks between cgroups to which CPU controller has been attached; but it is oddly possible to first move tasks around and then make them RT (setschedule to FIFO/RR). E.g.: # mkdir /sys/fs/cgroup/cpu,cpuacct/group1 # chrt -fp 10 $$ # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks bash: echo: write error: Invalid argument # chrt -op 0 $$ # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks # chrt -fp 10 $$ # cat /sys/fs/cgroup/cpu,cpuacct/group1/tasks 2345 2598 # chrt -p 2345 pid 2345's current scheduling policy: SCHED_FIFO pid 2345's current scheduling priority: 10 Also, as Michal noted, it is currently not possible to enable CPU controller on unified hierarchy with !CONFIG_RT_GROUP_SCHED (if there are any kernel RT threads in root cgroup, they can't be migrated to the newly created CPU controller's root in cgroup_update_dfl_csses()). Existing code comes with a comment saying the "we don't support RT-tasks being in separate groups". Such comment is however stale and belongs to pre-RT_GROUP_SCHED times. Also, it doesn't make much sense for !RT_GROUP_ SCHED configurations, since checks related to RT bandwidth are not performed at all in these cases. Make moving RT tasks between CPU controller groups viable by removing special case check for RT (and DEADLINE) tasks. Signed-off-by:
Michal Koutný <mkoutny@suse.com> Reviewed-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: rostedt@goodmis.org Link: https://lkml.kernel.org/r/20190719063455.27328-1-juri.lelli@redhat.comSigned-off-by:
-
Vincent Guittot authored
[ Upstream commit f6cad8df ] The load_balance() has a dedicated mecanism to detect when an imbalance is due to CPU affinity and must be handled at parent level. In this case, the imbalance field of the parent's sched_group is set. The description of sg_imbalanced() gives a typical example of two groups of 4 CPUs each and 4 tasks each with a cpumask covering 1 CPU of the first group and 3 CPUs of the second group. Something like: { 0 1 2 3 } { 4 5 6 7 } * * * * But the load_balance fails to fix this UC on my octo cores system made of 2 clusters of quad cores. Whereas the load_balance is able to detect that the imbalanced is due to CPU affinity, it fails to fix it because the imbalance field is cleared before letting parent level a chance to run. In fact, when the imbalance is detected, the load_balance reruns without the CPU with pinned tasks. But there is no other running tasks in the situation described above and everything looks balanced this time so the imbalance field is immediately cleared. The imbalance field should not be cleared if there is no other task to move when the imbalance is detected. Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
-
Paul E. McKenney authored
[ Upstream commit 84ec3a07 ] time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaint The TASKS03 and TREE04 rcutorture scenarios produce the following lockdep complaint: WARNING: inconsistent lock state 5.2.0-rc1+ #513 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. migration/1/14 [HC0[0]:SC0[0]:HE1:SE1] takes: (____ptrval____) (tick_broadcast_lock){?...}, at: tick_broadcast_offline+0xf/0x70 {IN-HARDIRQ-W} state was registered at: lock_acquire+0xb0/0x1c0 _raw_spin_lock_irqsave+0x3c/0x50 tick_broadcast_switch_to_oneshot+0xd/0x40 tick_switch_to_oneshot+0x4f/0xd0 hrtimer_run_queues+0xf3/0x130 run_local_timers+0x1c/0x50 update_process_times+0x1c/0x50 tick_periodic+0x26/0xc0 tick_handle_periodic+0x1a/0x60 smp_apic_timer_interrupt+0x80/0x2a0 apic_timer_interrupt+0xf/0x20 _raw_spin_unlock_irqrestore+0x4e/0x60 rcu_nocb_gp_kthread+0x15d/0x590 kthread+0xf3/0x130 ret_from_fork+0x3a/0x50 irq event stamp: 171 hardirqs last enabled at (171): [<ffffffff8a201a37>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (170): [<ffffffff8a201a53>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (0): [<ffffffff8a264ee0>] copy_process.part.56+0x650/0x1cb0 softirqs last disabled at (0): [<0000000000000000>] 0x0 [...] To reproduce, run the following rcutorture test: $ tools/testing/selftests/rcutorture/bin/kvm.sh --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TASKS03 TREE04" It turns out that tick_broadcast_offline() was an innocent bystander. After all, interrupts are supposed to be disabled throughout take_cpu_down(), and therefore should have been disabled upon entry to tick_offline_cpu() and thus to tick_broadcast_offline(). This suggests that one of the CPU-hotplug notifiers was incorrectly enabling interrupts, and leaving them enabled on return. Some debugging code showed that the culprit was sched_cpu_dying(). It had irqs enabled after return from sched_tick_stop(). Which in turn had irqs enabled after return from cancel_delayed_work_sync(). Which is a wrapper around __cancel_work_timer(). Which can sleep in the case where something else is concurrently trying to cancel the same delayed work, and as Thomas Gleixner pointed out on IRC, sleeping is a decidedly bad idea when you are invoked from take_cpu_down(), regardless of the state you leave interrupts in upon return. Code inspection located no reason why the delayed work absolutely needed to be canceled from sched_tick_stop(): The work is not bound to the outgoing CPU by design, given that the whole point is to collect statistics without disturbing the outgoing CPU. This commit therefore simply drops the cancel_delayed_work_sync() from sched_tick_stop(). Instead, a new ->state field is added to the tick_work structure so that the delayed-work handler function sched_tick_remote() can avoid reposting itself. A cpu_is_offline() check is also added to sched_tick_remote() to avoid mucking with the state of an offlined CPU (though it does appear safe to do so). The sched_tick_start() and sched_tick_stop() functions also update ->state, and sched_tick_start() also schedules the delayed work if ->state indicates that it is not already in flight. Signed-off-by:
Paul E. McKenney <paulmck@linux.ibm.com> [ paulmck: Apply Peter Zijlstra and Frederic Weisbecker atomics feedback. ] Signed-off-by:
Frederic Weisbecker <frederic@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190625165238.GJ26519@linux.ibm.comSigned-off-by:
-
Fabio Estevam authored
[ Upstream commit 8791a102 ] The power down and reset GPIO are optional, but the return value from devm_gpiod_get_optional() needs to be checked and propagated in the case of error, so that probe deferral can work. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Luke Nowakowski-Krijger authored
[ Upstream commit d4a6a953 ] Add hdpvr device num check and error handling We need to increment the device count atomically before we checkout a device to make sure that we do not reach the max count, otherwise we get out-of-bounds errors as reported by syzbot. Reported-and-tested-by: syzbot+aac8d0d7205f112045d2@syzkaller.appspotmail.com Signed-off-by:
Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Wen Yang authored
[ Upstream commit da79bf41 ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/media/platform/exynos4-is/fimc-is.c:813:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/fimc-is.c:870:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/fimc-is.c:885:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/media-dev.c:545:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 541, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/media-dev.c:528:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 499, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/media-dev.c:534:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 499, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Signed-off-by:
-
Sean Young authored
[ Upstream commit 5dd4b89d ] The rc-mm protocol can't be decoded by the mtk-cir since the de-glitch filter removes pulses/spaces shorter than 294 microseconds. Tested on a BananaPi R2. Signed-off-by:
Sean Wang <sean.wang@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 765bb861 ] When CONFIG_DVB_DIB9000 is disabled, we can still compile code that now fails to link against dibx000_i2c_set_speed: drivers/media/usb/dvb-usb/dib0700_devices.o: In function `dib01x0_pmu_update.constprop.7': dib0700_devices.c:(.text.unlikely+0x1c9c): undefined reference to `dibx000_i2c_set_speed' The call sites are both through dib01x0_pmu_update(), which gets passed an 'i2c' pointer from dib9000_get_i2c_master(), which has returned NULL. Checking this pointer seems to be a good idea anyway, and it avoids the link failure in most cases. Sean Young found another case that is not fixed by that, where certain gcc versions leave an unused function in place that causes the link error, but adding an explict IS_ENABLED() check also solves this. Fixes: b7f54910 ("V4L/DVB (4647): Added module for DiB0700 based devices") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Nick Stoughton authored
[ Upstream commit ed2abfeb ] Firmware files are in ASCII, using 2 hex characters per byte. The maximum length of a firmware string is therefore 16 (commands) * 2 (bytes per command) * 2 (characters per byte) = 64 Fixes: ff45262a ("leds: add new LP5562 LED driver") Signed-off-by:
Nick Stoughton <nstoughton@logitech.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 72503b25 ] During enabling of the RPi 4, we found out that the driver doesn't provide a helpful error message in case setting DMA mask fails. So add one. Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/1563297318-4900-1-git-send-email-wahrenst@gmx.netSigned-off-by:
-
Stephen Boyd authored
[ Upstream commit 6e37ccf7 ] We need to use the proper types and convert between physical addresses and dma addresses here to avoid mismatch warnings. This is especially important on systems with a different size for dma addresses and physical addresses. Otherwise, we get the following warning: drivers/firmware/qcom_scm.c: In function "qcom_scm_assign_mem": drivers/firmware/qcom_scm.c:469:47: error: passing argument 3 of "dma_alloc_coherent" from incompatible pointer type [-Werror=incompatible-pointer-types] We also fix the size argument to dma_free_coherent() because that size doesn't need to be aligned after it's already aligned on the allocation size. In fact, dma debugging expects the same arguments to be passed to both the allocation and freeing sides of the functions so changing the size is incorrect regardless. Reported-by:
Ian Jackson <ian.jackson@citrix.com> Cc: Ian Jackson <ian.jackson@citrix.com> Cc: Julien Grall <julien.grall@arm.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> Tested-by:
-
Oleksandr Suvorov authored
[ Upstream commit b6319b06 ] If VDDA != VDDIO and any of them is greater than 3.1V, charge pump source can be assigned automatically [1]. [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdfSigned-off-by:
Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by:
Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by:
-
Oleksandr Suvorov authored
[ Upstream commit 631bc8f0 ] To enable "zero cross detect" for ADC/HP, change HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole CHIP_ANA_CTRL register. Signed-off-by:
-
Lucas Stach authored
[ Upstream commit b7e814de ] Both the supplies and reset GPIO might need a probe deferral for the resource to be available. Don't print a error message in that case, as it is a normal operating condition. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
Andrew F. Davis <afd@ti.com> Link: https://lore.kernel.org/r/20190719143637.2018-1-l.stach@pengutronix.deSigned-off-by:
-
Axel Lin authored
[ Upstream commit 1e2cc8c5 ] According to the datasheet https://www.ti.com/lit/ds/symlink/lm3632a.pdf Table 20. VPOS Bias Register Field Descriptions VPOS[5:0] Sets the Positive Display Bias (LDO) Voltage (50 mV per step) 000000: 4 V 000001: 4.05 V 000010: 4.1 V .................... 011101: 5.45 V 011110: 5.5 V (Default) 011111: 5.55 V .................... 100111: 5.95 V 101000: 6 V Note: Codes 101001 to 111111 map to 6 V The LM3632_LDO_VSEL_MAX should be 0b101000 (0x28), so the maximum voltage can match the datasheet. Fixes: 3a8d1a73 ("regulator: add LM363X driver") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20190626132632.32629-1-axel.lin@ingics.comSigned-off-by:
-
Chris Wilson authored
[ Upstream commit caa8422d ] I was looking at <4> [241.835158] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [241.835181] CPU: 1 PID: 214 Comm: kworker/1:3 Tainted: G U 5.2.0-CI-CI_DRM_6509+ #1 <4> [241.835199] Hardware name: Dell Inc. OptiPlex 745 /0GW726, BIOS 2.3.1 05/21/2007 <4> [241.835234] Workqueue: events snd_hdac_bus_process_unsol_events [snd_hda_core] <4> [241.835256] RIP: 0010:input_handle_event+0x16d/0x5e0 <4> [241.835270] Code: 48 8b 93 58 01 00 00 8b 52 08 89 50 04 8b 83 f8 06 00 00 48 8b 93 00 07 00 00 8d 70 01 48 8d 04 c2 83 e1 08 89 b3 f8 06 00 00 <66> 89 28 66 44 89 60 02 44 89 68 04 8b 93 f8 06 00 00 0f 84 fd fe <4> [241.835304] RSP: 0018:ffffc9000019fda0 EFLAGS: 00010046 <4> [241.835317] RAX: 6b6b6b6ec6c6c6c3 RBX: ffff8880290fefc8 RCX: 0000000000000000 <4> [241.835332] RDX: 000000006b6b6b6b RSI: 000000006b6b6b6c RDI: 0000000000000046 <4> [241.835347] RBP: 0000000000000005 R08: 0000000000000000 R09: 0000000000000001 <4> [241.835362] R10: ffffc9000019faa0 R11: 0000000000000000 R12: 0000000000000004 <4> [241.835377] R13: 0000000000000000 R14: ffff8880290ff1d0 R15: 0000000000000293 <4> [241.835392] FS: 0000000000000000(0000) GS:ffff88803de80000(0000) knlGS:0000000000000000 <4> [241.835409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [241.835422] CR2: 00007ffe9a99e9b7 CR3: 000000002f588000 CR4: 00000000000006e0 <4> [241.835436] Call Trace: <4> [241.835449] input_event+0x45/0x70 <4> [241.835464] snd_jack_report+0xdc/0x100 <4> [241.835490] snd_hda_jack_report_sync+0x83/0xc0 [snd_hda_codec] <4> [241.835512] snd_hdac_bus_process_unsol_events+0x5a/0x70 [snd_hda_core] <4> [241.835530] process_one_work+0x245/0x610 which has the hallmarks of a worker queued from interrupt after it was supposedly cancelled (note the POISON_FREE), and I could not see where the interrupt would be flushed on shutdown so added the likely suspects. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111174Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit 8572cea1 ] In nfp_flower_spawn_phy_reprs, in the for loop over eth_tbl if any of intermediate allocations or initializations fail memory is leaked. requiered releases are added. Fixes: b9452452 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ori Nimron authored
[ Upstream commit 3a359798 ] When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked first. Signed-off-by:
Ori Nimron <orinimron123@gmail.com> Signed-off-by:
-
Ori Nimron authored
[ Upstream commit e69dbd46 ] When creating a raw AF_IEEE802154 socket, CAP_NET_RAW needs to be checked first. Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Ori Nimron authored
[ Upstream commit 0614e2b7 ] When creating a raw AF_AX25 socket, CAP_NET_RAW needs to be checked first. Signed-off-by:
-
Ori Nimron authored
[ Upstream commit 6cc03e8a ] When creating a raw AF_APPLETALK socket, CAP_NET_RAW needs to be checked first. Signed-off-by:
-
Ori Nimron authored
[ Upstream commit b91ee4aa ] When creating a raw AF_ISDN socket, CAP_NET_RAW needs to be checked first. Signed-off-by:
-
Bodong Wang authored
[ Upstream commit d19a79ee ] Add the device ID of upcoming BlueField-2 integrated ConnectX-6 Dx network controller. Its VFs will be using the generic VF device ID: 0x101e "ConnectX Family mlx5Gen Virtual Function". Fixes: 2e9d3e83 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by:
Bodong Wang <bodong@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
