Sort the exception table at build-time rather than during boot.

Microblaze is the same case as AARCH64 that's why EM_MICROBLAZE
conditional check was added to allow cross-compilation on machines which
are not running the latest libc-dev.

Inspired by AARCH64 commit adace895 ("arm64: extable: sort the
exception table at build time").
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

  drivers/staging/comedi/drivers/das6402.c: In function 'intr_handler':
  drivers/staging/comedi/drivers/das6402.c:164:3: error: implicit declaration of function 'outw_p' [-Werror=implicit-function-declaration]
  drivers/staging/speakup/speakup_dtlk.c: In function 'synth_probe':
  drivers/staging/speakup/speakup_dtlk.c:362:2: error: implicit declaration of function 'inw_p' [-Werror=implicit-function-declaration]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull UDF & jbd fixes from Jan Kara:
 "A cleanup of JBD log messages and UDF fix of a lockdep warning"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix lockdep warning from udf_symlink()
  jbd: Revise KERN_EMERG error messages

The associative array code creates unnecessary and potentially
problematic global variable 'status'.  Remove it since never used.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull fuse update from Miklos Szeredi:
 "This contains a fix for a potential use-after-module-unload bug
  noticed by Al and caching improvements for read-only fuse filesystems
  by Andrew Gallagher"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: support clients that don't implement 'open'
  fuse: don't invalidate attrs when not using atime
  fuse: fix SetPageUptodate() condition in STORE
  fuse: fix pipe_buf_operations

Pull f2fs updates from Jaegeuk Kim:
 "In this round, a couple of sysfs entries were introduced to tune the
  f2fs at runtime.

  In addition, f2fs starts to support inline_data and improves the
  read/write performance in some workloads by refactoring bio-related
  flows.

  This patch-set includes the following major enhancement patches.
   - support inline_data
   - refactor bio operations such as merge operations and rw type
     assignment
   - enhance the direct IO path
   - enhance bio operations
   - truncate a node page when it becomes obsolete
   - add sysfs entries: small_discards, max_victim_search, and
     in-place-update
   - add a sysfs entry to control max_victim_search

  The other bug fixes are as follows.
   - fix a bug in truncate_partial_nodes
   - avoid warnings during sparse and build process
   - fix error handling flows
   - fix potential bit overflows

  And, there are a bunch of cleanups"

* tag 'for-f2fs-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (95 commits)
  f2fs: drop obsolete node page when it is truncated
  f2fs: introduce NODE_MAPPING for code consistency
  f2fs: remove the orphan block page array
  f2fs: add help function META_MAPPING
  f2fs: move a branch for code redability
  f2fs: call mark_inode_dirty to flush dirty pages
  f2fs: clean checkpatch warnings
  f2fs: missing REQ_META and REQ_PRIO when sync_meta_pages(META_FLUSH)
  f2fs: avoid f2fs_balance_fs call during pageout
  f2fs: add delimiter to seperate name and value in debug phrase
  f2fs: use spinlock rather than mutex for better speed
  f2fs: move alloc new orphan node out of lock protection region
  f2fs: move grabing orphan pages out of protection region
  f2fs: remove the needless parameter of f2fs_wait_on_page_writeback
  f2fs: update documents and a MAINTAINERS entry
  f2fs: add a sysfs entry to control max_victim_search
  f2fs: improve write performance under frequent fsync calls
  f2fs: avoid to read inline data except first page
  f2fs: avoid to left uninitialized data in page when read inline data
  f2fs: fix truncate_partial_nodes bug
  ...

Pull xfs update from Ben Myers:
 "This is primarily bug fixes, many of which you already have.  New
  stuff includes a series to decouple the in-memory and on-disk log
  format, helpers in the area of inode clusters, and i_version handling.

  We decided to try to use more topic branches this release, so there
  are some merge commits in there on account of that.  I'm afraid I
  didn't do a good job of putting meaningful comments in the first
  couple of merges.  Sorry about that.  I think I have the hang of it
  now.

  For 3.14-rc1 there are fixes in the areas of remote attributes,
  discard, growfs, memory leaks in recovery, directory v2, quotas, the
  MAINTAINERS file, allocation alignment, extent list locking, and in
  xfs_bmapi_allocate.  There are cleanups in xfs_setsize_buftarg,
  removing unused macros, quotas, setattr, and freeing of inode
  clusters.  The in-memory and on-disk log format have been decoupled, a
  common helper to calculate the number of blocks in an inode cluster
  has been added, and handling of i_version has been pulled into the
  filesystems that use it.

   - cleanup in xfs_setsize_buftarg
   - removal of remaining unused flags for vop toss/flush/flushinval
   - fix for memory corruption in xfs_attrlist_by_handle
   - fix for out-of-date comment in xfs_trans_dqlockedjoin
   - fix for discard if range length is less than one block
   - fix for overrun of agfl buffer using growfs on v4 superblock
     filesystems
   - pull i_version handling out into the filesystems that use it
   - don't leak recovery items on error
   - fix for memory leak in xfs_dir2_node_removename
   - several cleanups for quotas
   - fix bad assertion in xfs_qm_vop_create_dqattach
   - cleanup for xfs_setattr_mode, and add xfs_setattr_time
   - fix quota assert in xfs_setattr_nonsize
   - fix an infinite loop when turning off group/project quota before
     user quota
   - fix for temporary buffer allocation failure in xfs_dir2_block_to_sf
     with large directory block sizes
   - fix Dave's email address in MAINTAINERS
   - cleanup calculation of freed inode cluster blocks
   - fix alignment of initial file allocations to match filesystem
     geometry
   - decouple in-memory and on-disk log format
   - introduce a common helper to calculate the number of filesystem
     blocks in an inode cluster
   - fixes for extent list locking
   - fix for off-by-one in xfs_attr3_rmt_verify
   - fix for missing destroy_work_on_stack in xfs_bmapi_allocate"

* tag 'xfs-for-linus-v3.14-rc1' of git://oss.sgi.com/xfs/xfs: (51 commits)
  xfs: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
  xfs: fix off-by-one error in xfs_attr3_rmt_verify
  xfs: assert that we hold the ilock for extent map access
  xfs: use xfs_ilock_attr_map_shared in xfs_attr_list_int
  xfs: use xfs_ilock_attr_map_shared in xfs_attr_get
  xfs: use xfs_ilock_data_map_shared in xfs_qm_dqiterate
  xfs: use xfs_ilock_data_map_shared in xfs_qm_dqtobp
  xfs: take the ilock around xfs_bmapi_read in xfs_zero_remaining_bytes
  xfs: reinstate the ilock in xfs_readdir
  xfs: add xfs_ilock_attr_map_shared
  xfs: rename xfs_ilock_map_shared
  xfs: remove xfs_iunlock_map_shared
  xfs: no need to lock the inode in xfs_find_handle
  xfs: use xfs_icluster_size_fsb in xfs_imap
  xfs: use xfs_icluster_size_fsb in xfs_ifree_cluster
  xfs: use xfs_icluster_size_fsb in xfs_ialloc_inode_init
  xfs: use xfs_icluster_size_fsb in xfs_bulkstat
  xfs: introduce a common helper xfs_icluster_size_fsb
  xfs: get rid of XFS_IALLOC_BLOCKS macros
  xfs: get rid of XFS_INODE_CLUSTER_SIZE macros
  ...

Pull module updates from Rusty Russell.

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: Add missing newline in printk call.
  module: fix coding style
  export: declare ksymtab symbols
  module.h: Remove unnecessary semicolon
  params: improve standard definitions
  Add Documentation/module-signing.txt file

Pull virtio update from Rusty Russell:
 "A few simple fixes.  Quiet cycle"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  drivers: virtio: Mark function virtballoon_migratepage() as static in virtio_balloon.c
  virtio-scsi: Fix hotcpu_notifier use-after-free with virtscsi_freeze
  virtio: pci: remove unnecessary pci_set_drvdata()

Pull Xen updates from Konrad Rzeszutek Wilk:
 "Two major features that Xen community is excited about:

  The first is event channel scalability by David Vrabel - we switch
  over from an two-level per-cpu bitmap of events (IRQs) - to an FIFO
  queue with priorities.  This lets us be able to handle more events,
  have lower latency, and better scalability.  Good stuff.

  The other is PVH by Mukesh Rathor.  In short, PV is a mode where the
  kernel lets the hypervisor program page-tables, segments, etc.  With
  EPT/NPT capabilities in current processors, the overhead of doing this
  in an HVM (Hardware Virtual Machine) container is much lower than the
  hypervisor doing it for us.

  In short we let a PV guest run without doing page-table, segment,
  syscall, etc updates through the hypervisor - instead it is all done
  within the guest container.  It is a "hybrid" PV - hence the 'PVH'
  name - a PV guest within an HVM container.

  The major benefits are less code to deal with - for example we only
  use one function from the the pv_mmu_ops (which has 39 function
  calls); faster performance for syscall (no context switches into the
  hypervisor); less traps on various operations; etc.

  It is still being baked - the ABI is not yet set in stone.  But it is
  pretty awesome and we are excited about it.

  Lastly, there are some changes to ARM code - you should get a simple
  conflict which has been resolved in #linux-next.

  In short, this pull has awesome features.

  Features:
   - FIFO event channels.  Key advantages: support for over 100,000
     events (2^17), 16 different event priorities, improved fairness in
     event latency through the use of FIFOs.
   - Xen PVH support.  "It’s a fully PV kernel mode, running with
     paravirtualized disk and network, paravirtualized interrupts and
     timers, no emulated devices of any kind (and thus no qemu), no BIOS
     or legacy boot — but instead of requiring PV MMU, it uses the HVM
     hardware extensions to virtualize the pagetables, as well as system
     calls and other privileged operations." (from "The
     Paravirtualization Spectrum, Part 2: From poles to a spectrum")

  Bug-fixes:
   - Fixes in balloon driver (refactor and make it work under ARM)
   - Allow xenfb to be used in HVM guests.
   - Allow xen_platform_pci=0 to work properly.
   - Refactors in event channels"

* tag 'stable/for-linus-3.14-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (52 commits)
  xen/pvh: Set X86_CR0_WP and others in CR0 (v2)
  MAINTAINERS: add git repository for Xen
  xen/pvh: Use 'depend' instead of 'select'.
  xen: delete new instances of __cpuinit usage
  xen/fb: allow xenfb initialization for hvm guests
  xen/evtchn_fifo: fix error return code in evtchn_fifo_setup()
  xen-platform: fix error return code in platform_pci_init()
  xen/pvh: remove duplicated include from enlighten.c
  xen/pvh: Fix compile issues with xen_pvh_domain()
  xen: Use dev_is_pci() to check whether it is pci device
  xen/grant-table: Force to use v1 of grants.
  xen/pvh: Support ParaVirtualized Hardware extensions (v3).
  xen/pvh: Piggyback on PVHVM XenBus.
  xen/pvh: Piggyback on PVHVM for grant driver (v4)
  xen/grant: Implement an grant frame array struct (v3).
  xen/grant-table: Refactor gnttab_init
  xen/grants: Remove gnttab_max_grant_frames dependency on gnttab_init.
  xen/pvh: Piggyback on PVHVM for event channels (v2)
  xen/pvh: Update E820 to work with PVH (v2)
  xen/pvh: Secondary VCPU bringup (non-bootup CPUs)
  ...

Pull KVM updates from Paolo Bonzini:
 "First round of KVM updates for 3.14; PPC parts will come next week.

  Nothing major here, just bugfixes all over the place.  The most
  interesting part is the ARM guys' virtualized interrupt controller
  overhaul, which lets userspace get/set the state and thus enables
  migration of ARM VMs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits)
  kvm: make KVM_MMU_AUDIT help text more readable
  KVM: s390: Fix memory access error detection
  KVM: nVMX: Update guest activity state field on L2 exits
  KVM: nVMX: Fix nested_run_pending on activity state HLT
  KVM: nVMX: Clean up handling of VMX-related MSRs
  KVM: nVMX: Add tracepoints for nested_vmexit and nested_vmexit_inject
  KVM: nVMX: Pass vmexit parameters to nested_vmx_vmexit
  KVM: nVMX: Leave VMX mode on clearing of feature control MSR
  KVM: VMX: Fix DR6 update on #DB exception
  KVM: SVM: Fix reading of DR6
  KVM: x86: Sync DR7 on KVM_SET_DEBUGREGS
  add support for Hyper-V reference time counter
  KVM: remove useless write to vcpu->hv_clock.tsc_timestamp
  KVM: x86: fix tsc catchup issue with tsc scaling
  KVM: x86: limit PIT timer frequency
  KVM: x86: handle invalid root_hpa everywhere
  kvm: Provide kvm_vcpu_eligible_for_directed_yield() stub
  kvm: vfio: silence GCC warning
  KVM: ARM: Remove duplicate include
  arm/arm64: KVM: relax the requirements of VMA alignment for THP
  ...

Pull trivial tree updates from Jiri Kosina:
 "Usual rocket science stuff from trivial.git"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  neighbour.h: fix comment
  sched: Fix warning on make htmldocs caused by wait.h
  slab: struct kmem_cache is protected by slab_mutex
  doc: Fix typo in USB Gadget Documentation
  of/Kconfig: Spelling s/one/once/
  mkregtable: Fix sscanf handling
  lp5523, lp8501: comment improvements
  thermal: rcar: comment spelling
  treewide: fix comments and printk msgs
  IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart()
  Documentation: update /proc/uptime field description
  Documentation: Fix size parameter for snprintf
  arm: fix comment header and macro name
  asm-generic: uaccess: Spelling s/a ny/any/
  mtd: onenand: fix comment header
  doc: driver-model/platform.txt: fix a typo
  drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text
  doc: Fix typo (acces_process_vm -> access_process_vm)
  treewide: Fix typos in printk
  drivers/gpu/drm/qxl/Kconfig: reformat the help text
  ...

Pull HID updates from Jiri Kosina:

 - quite some work on hid-sony driver in order to have DualShock 4
   device properly supported, from Frank Praznik

 - fixed support for suspending I2C conntected devices, from Mika
   Westerberg

 - regression fix for 0xff05 usage on Microsoft Ergonomy, from Jiri
   Kosina

 - support for Synaptics HD touchscreen, from AceLan Kao

 - workaround for USB 3.0 problem for logitech-dj connected devices,
   from Benjamin Tisssoires

 - support for Logitech Dual Action pads, from Vitaly Katraew

 - quite a few other assorted fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits)
  HID: sony: Use colors for the Dualshock 4 LED names
  HID: sony: Add annotated HID descriptor for the Dualshock 4
  HID: sony: Cache the output report for the Dualshock 4
  HID: sony: Map gyroscopes and accelerometers to axes
  HID: sony: Fix spacing in the device definitions.
  HID: sony: Use standard output reports instead of raw reports to send data to the Dualshock 4.
  HID: sony: Use separate identifiers for USB and Bluetooth connected Dualshock 4 controllers.
  HID: hid-holtek-mouse: add new a070 mouse
  HID: hid-sensor-hub: Fix buggy report descriptors
  HID: logitech-dj: Fix USB 3.0 issue
  HID: sony: Rename worker function
  HID: sony: Add LED controls for the Dualshock 4
  HID: sony: Add force-feedback support for the Dualshock 4
  HID: hidraw: make comment more accurate and nicer
  HID: sony: fix error return code
  HID: input: fix input sysfs path for hid devices
  HID: debug: add labels for some new buttons
  HID: remove SIS entries from hid_have_special_driver[]
  HID: microsoft: no fallthrough in MS ergonomy 0xff05 usage
  HID: add support for SiS multitouch panel in the touch monitor LG 23ET83V
  ...

Pull device-mapper changes from Mike Snitzer:
 "A lot of attention was paid to improving the thin-provisioning
  target's handling of metadata operation failures and running out of
  space.  A new 'error_if_no_space' feature was added to allow users to
  error IOs rather than queue them when either the data or metadata
  space is exhausted.

  Additional fixes/features include:
   - a few fixes to properly support thin metadata device resizing
   - a solution for reliably waiting for a DM device's embedded kobject
     to be released before destroying the device
   - old dm-snapshot is updated to use the dm-bufio interface to take
     advantage of readahead capabilities that improve snapshot
     activation
   - new dm-cache target tunables to control how quickly data is
     promoted to the cache (fast) device
   - improved write efficiency of cluster mirror target by combining
     userspace flush and mark requests"

* tag 'dm-3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits)
  dm log userspace: allow mark requests to piggyback on flush requests
  dm space map metadata: fix bug in resizing of thin metadata
  dm cache: add policy name to status output
  dm thin: fix pool feature parsing
  dm sysfs: fix a module unload race
  dm snapshot: use dm-bufio prefetch
  dm snapshot: use dm-bufio
  dm snapshot: prepare for switch to using dm-bufio
  dm snapshot: use GFP_KERNEL when initializing exceptions
  dm cache: add block sizes and total cache blocks to status output
  dm btree: add dm_btree_find_lowest_key
  dm space map metadata: fix extending the space map
  dm space map common: make sure new space is used during extend
  dm: wait until embedded kobject is released before destroying a device
  dm: remove pointless kobject comparison in dm_get_from_kobject
  dm snapshot: call destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
  dm cache policy mq: introduce three promotion threshold tunables
  dm cache policy mq: use list_del_init instead of list_del + INIT_LIST_HEAD
  dm thin: fix set_pool_mode exposed pool operation races
  dm thin: eliminate the no_free_space flag
  ...

Pull SCSI updates from James Bottomley:
 "This patch set is a lot of driver updates for qla4xxx, bfa, hpsa,
  qla2xxx.  It also removes the aic7xxx_old driver (which has been
  deprecated for nearly a decade) and adds support for deadlines in
  error handling"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (75 commits)
  [SCSI] hpsa: allow SCSI mid layer to handle unit attention
  [SCSI] hpsa: do not require board "not ready" status after hard reset
  [SCSI] hpsa: enable unit attention reporting
  [SCSI] hpsa: rename scsi prefetch field
  [SCSI] hpsa: use workqueue instead of kernel thread for lockup detection
  [SCSI] ipr: increase dump size in ipr driver
  [SCSI] mac_scsi: Fix crash on out of memory
  [SCSI] st: fix enlarge_buffer
  [SCSI] qla1280: Annotate timer on stack so object debug does not complain
  [SCSI] qla4xxx: Update driver version to 5.04.00-k3
  [SCSI] qla4xxx: Recreate chap data list during get chap operation
  [SCSI] qla4xxx: Add support for ISCSI_PARAM_LOCAL_IPADDR sysfs attr
  [SCSI] libiscsi: Add local_ipaddr parameter in iscsi_conn struct
  [SCSI] scsi_transport_iscsi: Export ISCSI_PARAM_LOCAL_IPADDR attr for iscsi_connection
  [SCSI] qla4xxx: Add host statistics support
  [SCSI] scsi_transport_iscsi: Add host statistics support
  [SCSI] qla4xxx: Added support for Diagnostics MBOX command
  [SCSI] bfa: Driver version upgrade to 3.2.23.0
  [SCSI] bfa: change FC_ELS_TOV to 20sec
  [SCSI] bfa: Observed auto D-port mode instead of manual
  ...

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.14 merge window:

  Resource management
    - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
    - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
    - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
    - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
    - Enforce bus address limits in resource allocation (Yinghai Lu)
    - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
    - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)

  PCI device hotplug
    - Major rescan/remove locking update (Rafael J. Wysocki)
    - Make ioapic builtin only (not modular) (Yinghai Lu)
    - Fix release/free issues (Yinghai Lu)
    - Clean up pciehp (Bjorn Helgaas)
    - Announce pciehp slot info during enumeration (Bjorn Helgaas)

  MSI
    - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
    - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
    - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
    - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
    - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)

  SR-IOV
    - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)

  Virtualization
    - Add support for save/restore of extended capabilities (Alex Williamson)
    - Add Virtual Channel to save/restore support (Alex Williamson)
    - Never treat a VF as a multifunction device (Alex Williamson)
    - Add pci_try_reset_function(), et al (Alex Williamson)

  AER
    - Ignore non-PCIe error sources (Betty Dall)
    - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
    - Consolidate HEST error source parsers (Bjorn Helgaas)
    - Add a TLP header print helper (Borislav Petkov)

  Freescale i.MX6
    - Remove unnecessary code (Fabio Estevam)
    - Make reset-gpio optional (Marek Vasut)
    - Report "link up" only after link training completes (Marek Vasut)
    - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
    - Fix PCIe startup code (Richard Zhu)

  Marvell MVEBU
    - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
    - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
    - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
    - Support a bridge with no IO port window (Jason Gunthorpe)
    - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
    - Remove redundant of_match_ptr (Sachin Kamat)
    - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)

  NVIDIA Tegra
    - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)

  Renesas R-Car
    - Add runtime PM support (Valentine Barshak)
    - Fix rcar_pci_probe() return value check (Wei Yongjun)

  Synopsys DesignWare
    - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
    - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
    - Fix missing MSI IRQs (Harro Haan)
    - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
    - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
    - Whitespace cleanup (Jingoo Han)

  EISA
    - Call put_device() if device_register() fails (Levente Kurusa)
    - Revert EISA initialization breakage ((Bjorn Helgaas)

  Miscellaneous
    - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
    - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
    - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
    - Use dev_is_pci() to identify PCI devices (Yijing Wang)
    - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
    - Update documentation 00-INDEX (Erik Ekman)"

* tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits)
  Revert "EISA: Initialize device before its resources"
  Revert "EISA: Log device resources in dmesg"
  vfio-pci: Use pci "try" reset interface
  PCI: Check parent kobject in pci_destroy_dev()
  xen/pcifront: Use global PCI rescan-remove locking
  powerpc/eeh: Use global PCI rescan-remove locking
  PCI: Fix pci_check_and_unmask_intx() comment typos
  PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
  MPT / PCI: Use pci_stop_and_remove_bus_device_locked()
  platform / x86: Use global PCI rescan-remove locking
  PCI: hotplug: Use global PCI rescan-remove locking
  pcmcia: Use global PCI rescan-remove locking
  ACPI / hotplug / PCI: Use global PCI rescan-remove locking
  ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug
  PCI: Add global pci_lock_rescan_remove()
  PCI: Cleanup pci.h whitespace
  PCI: Reorder so actual code comes before stubs
  PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
  ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
  PCI: Make local functions static
  ...

Pull tracing updates from Steven Rostedt:
 "This pull request has a new feature to ftrace, namely the trace event
  triggers by Tom Zanussi.  A trigger is a way to enable an action when
  an event is hit.  The actions are:

   o  trace on/off - enable or disable tracing
   o  snapshot     - save the current trace buffer in the snapshot
   o  stacktrace   - dump the current stack trace to the ringbuffer
   o  enable/disable events - enable or disable another event

  Namhyung Kim added updates to the tracing uprobes code.  Having the
  uprobes add support for fetch methods.

  The rest are various bug fixes with the new code, and minor ones for
  the old code"

* tag 'trace-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (38 commits)
  tracing: Fix buggered tee(2) on tracing_pipe
  tracing: Have trace buffer point back to trace_array
  ftrace: Fix synchronization location disabling and freeing ftrace_ops
  ftrace: Have function graph only trace based on global_ops filters
  ftrace: Synchronize setting function_trace_op with ftrace_trace_function
  tracing: Show available event triggers when no trigger is set
  tracing: Consolidate event trigger code
  tracing: Fix counter for traceon/off event triggers
  tracing: Remove double-underscore naming in syscall trigger invocations
  tracing/kprobes: Add trace event trigger invocations
  tracing/probes: Fix build break on !CONFIG_KPROBE_EVENT
  tracing/uprobes: Add @+file_offset fetch method
  uprobes: Allocate ->utask before handler_chain() for tracing handlers
  tracing/uprobes: Add support for full argument access methods
  tracing/uprobes: Fetch args before reserving a ring buffer
  tracing/uprobes: Pass 'is_return' to traceprobe_parse_probe_arg()
  tracing/probes: Implement 'memory' fetch method for uprobes
  tracing/probes: Add fetch{,_size} member into deref fetch method
  tracing/probes: Move 'symbol' fetch method to kprobes
  tracing/probes: Implement 'stack' fetch method for uprobes
  ...

If a node page is trucated, we'd better drop the page in the node_inode's page
cache for better memory footprint.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

open/release operations require userspace transitions to keep track
of the open count and to perform any FS-specific setup.  However,
for some purely read-only FSs which don't need to perform any setup
at open/release time, we can avoid the performance overhead of
calling into userspace for open/release calls.

This patch adds the necessary support to the fuse kernel modules to prevent
open/release operations from hitting in userspace. When the client returns
ENOSYS, we avoid sending the subsequent release to userspace, and also
remember this so that future opens also don't trigger a userspace
operation.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

Various read operations (e.g. readlink, readdir) invalidate the cached
attrs for atime changes.  This patch adds a new function
'fuse_invalidate_atime', which checks for a read-only super block and
avoids the attr invalidation in that case.
Signed-off-by: Andrew Gallagher <andrewjcg@fb.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

As noticed by Coverity the "num != 0" condition never triggers.  Instead it
should check for a complete page.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

Having this struct in module memory could Oops when if the module is
unloaded while the buffer still persists in a pipe.

Since sock_pipe_buf_ops is essentially the same as fuse_dev_pipe_buf_steal
merge them into nosteal_pipe_buf_ops (this is the same as
default_pipe_buf_ops except stealing the page from the buffer is not
allowed).
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: stable@vger.kernel.org

Merge branches 'for-3.13/upstream-fixes', 'for-3.14/i2c-hid', 'for-3.14/sensor-hub', 'for-3.14/sony' and 'for-3.14/upstream' into for-linus

This patch adds NODE_MAPPING which is similar as META_MAPPING introduced by
Gu Zheng.

Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

As the orphan_blocks may be max to 504, so it is not security
and rigorous to store such a large array in the kernel stack
as Dan Carpenter said.
In fact, grab_meta_page has locked the page in the page cache,
and we can use find_get_page() to fetch the page safely in the
downstream, so we can remove the page array directly.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Introduce help function META_MAPPING() to get the cache meta blocks'
address space.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch moves a function in f2fs_delete_entry for code readability.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

If a dentry page is updated, we should call mark_inode_dirty to add the inode
into the dirty list, so that its dentry pages are flushed to the disk.
Otherwise, the inode can be evicted without flush.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Missing "@" in include/linux/wait.h cause "make htmldocs" failed
with following warning messages.

Warning(/home/iida/Repo/linux-next//include/linux/wait.h:304):
No description found for parameter 'cmd1'
Warning(/home/iida/Repo/linux-next//include/linux/wait.h:304):
No description found for parameter 'cmd2'
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

In the cluster evironment, cluster write has poor performance because
userspace_flush() has to contact a userspace program (cmirrord) for
clear/mark/flush requests.  But both mark and flush requests require
cmirrord to communicate the message to all the cluster nodes for each
flush call.  This behaviour is really slow.

To address this we now merge mark and flush requests together to reduce
the kernel-userspace-kernel time.  We allow a new directive,
"integrated_flush" that can be used to instruct the kernel log code to
combine flush and mark requests when directed by userspace.  If not
directed by userspace (due to an older version of the userspace code
perhaps), the kernel will function as it did previously - preserving
backwards compatibility.  Additionally, flush requests are performed
lazily when only clear requests exist.
Signed-off-by: Dongmao Zhang <dmzhang@suse.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Merge first patch-bomb from Andrew Morton:

 - a couple of misc things

 - inotify/fsnotify work from Jan

 - ocfs2 updates (partial)

 - about half of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits)
  mm/migrate: remove unused function, fail_migrate_page()
  mm/migrate: remove putback_lru_pages, fix comment on putback_movable_pages
  mm/migrate: correct failure handling if !hugepage_migration_support()
  mm/migrate: add comment about permanent failure path
  mm, page_alloc: warn for non-blockable __GFP_NOFAIL allocation failure
  mm: compaction: reset scanner positions immediately when they meet
  mm: compaction: do not mark unmovable pageblocks as skipped in async compaction
  mm: compaction: detect when scanners meet in isolate_freepages
  mm: compaction: reset cached scanner pfn's before reading them
  mm: compaction: encapsulate defer reset logic
  mm: compaction: trace compaction begin and end
  memcg, oom: lock mem_cgroup_print_oom_info
  sched: add tracepoints related to NUMA task migration
  mm: numa: do not automatically migrate KSM pages
  mm: numa: trace tasks that fail migration due to rate limiting
  mm: numa: limit scope of lock for NUMA migrate rate limiting
  mm: numa: make NUMA-migrate related functions static
  lib/show_mem.c: show num_poisoned_pages when oom
  mm/hwpoison: add '#' to hwpoison_inject
  mm/memblock: use WARN_ONCE when MAX_NUMNODES passed as input parameter
  ...

Pull libata updates from Tejun Heo:
 "Support for some new embedded controllers.

  A couple late (<= a week) fixes have stable cc'd and one patch ("SATA:
  MV: Add support for the optional PHYs") got committed yesterday
  because otherwise the resulting kernel would fail boot on an embedded
  board due to interdependent changes in its platform tree.

  Other than that, nothing too noteworthy"

* 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  SATA: MV: Add support for the optional PHYs
  sata-highbank: Remove unnecessary ahci_platform.h include
  libata: disable LPM for some WD SATA-I devices
  ARM: mvebu: update the SATA compatible string for Armada 370/XP
  ata: sata_mv: fix disk hotplug for Armada 370/XP SoCs
  ata: sata_mv: introduce compatible string "marvell, armada-370-sata"
  ata: pata_samsung_cf: Remove unused macros
  ata: pata_samsung_cf: Use devm_ioremap_resource()
  ata: pata_samsung_cf: Merge pata_samsung_cf.h into pata_samsung_cf.c
  ata: pata_samsung_cf: Move plat/regs-ata.h to drivers/ata
  drivers: ata: Mark the function as static in libahci.c
  drivers: ata: Mark the function ahci_init_interrupts() as static in ahci.c
  ahci: imx: fix the error handling in imx_ahci_probe()
  ahci: imx: ahci_imx_softreset() can be static
  ahci: imx: Add i.MX53 support
  ahci: imx: Pull out the clock enable/disable calls
  libata, dt: Document sata_rcar bindings
  sata_rcar: Add R-Car Gen2 SATA PHY support
  ahci: mcp89: enter AHCI mode under Apple BIOS emulation
  ata: libata-eh: Remove unnecessary snprintf arithmetic

Pull cgroup updates from Tejun Heo:
 "The bulk of changes are cleanups and preparations for the upcoming
  kernfs conversion.

   - cgroup_event mechanism which is and will be used only by memcg is
     moved to memcg.

   - pidlist handling is updated so that it can be served by seq_file.

     Also, the list is not sorted if sane_behavior.  cgroup
     documentation explicitly states that the file is not sorted but it
     has been for quite some time.

   - All cgroup file handling now happens on top of seq_file.  This is
     to prepare for kernfs conversion.  In addition, all operations are
     restructured so that they map 1-1 to kernfs operations.

   - Other cleanups and low-pri fixes"

* 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (40 commits)
  cgroup: trivial style updates
  cgroup: remove stray references to css_id
  doc: cgroups: Fix typo in doc/cgroups
  cgroup: fix fail path in cgroup_load_subsys()
  cgroup: fix missing unlock on error in cgroup_load_subsys()
  cgroup: remove for_each_root_subsys()
  cgroup: implement for_each_css()
  cgroup: factor out cgroup_subsys_state creation into create_css()
  cgroup: combine css handling loops in cgroup_create()
  cgroup: reorder operations in cgroup_create()
  cgroup: make for_each_subsys() useable under cgroup_root_mutex
  cgroup: css iterations and css_from_dir() are safe under cgroup_mutex
  cgroup: unify pidlist and other file handling
  cgroup: replace cftype->read_seq_string() with cftype->seq_show()
  cgroup: attach cgroup_open_file to all cgroup files
  cgroup: generalize cgroup_pidlist_open_file
  cgroup: unify read path so that seq_file is always used
  cgroup: unify cgroup_write_X64() and cgroup_write_string()
  cgroup: remove cftype->read(), ->read_map() and ->write()
  hugetlb_cgroup: convert away from cftype->read()
  ...

Pull percpu changes from Tejun Heo:
 "Two trivial changes - addition of WARN_ONCE() in lib/percpu-refcount.c
  and use of VMALLOC_TOTAL instead of END - START in percpu.c"

* 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: use VMALLOC_TOTAL instead of VMALLOC_END - VMALLOC_START
  percpu-refcount: Add a WARN() for ref going negative

Pull workqueue update from Tejun Heo:
 "Just one patch to add destroy_work_on_stack() annotations to help
  debugobj debugging"

* 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()

Pull dlm update from David Teigland:
 "A single change to speed up recovery times when using SCTP
  connections"

* tag 'dlm-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: set zero linger time on sctp socket

Pull GFS2 updates from Steven Whitehouse:
 "The main topics this time are allocation, in the form of Bob's
  improvements when searching resource groups and several updates to
  quotas which should increase scalability.  The quota changes follow on
  from those in the last merge window, and there will likely be further
  work to come in this area in due course.

  There are also a few patches which help to improve efficiency of
  adding entries into directories, and clean up some of that code.

  One on-disk change is included this time, which is to write some
  additional information which should be useful to fsck and also
  potentially for debugging.

  Other than that, its just a few small random bug fixes and clean ups"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (24 commits)
  GFS2: revert "GFS2: d_splice_alias() can't return error"
  GFS2: Small cleanup
  GFS2: Don't use ENOBUFS when ENOMEM is the correct error code
  GFS2: Fix kbuild test robot reported warning
  GFS2: Move quota bitmap operations under their own lock
  GFS2: Clean up quota slot allocation
  GFS2: Only run logd and quota when mounted read/write
  GFS2: Use RCU/hlist_bl based hash for quotas
  GFS2: No need to invalidate pages for a dio read
  GFS2: Add initialization for address space in super block
  GFS2: Add hints to directory leaf blocks
  GFS2: For exhash conversion, only one block is needed
  GFS2: Increase i_writecount during gfs2_setattr_chown
  GFS2: Remember directory insert point
  GFS2: Consolidate transaction blocks calculation for dir add
  GFS2: Add directory addition info structure
  GFS2: Use only a single address space for rgrps
  GFS2: Use range based functions for rgrp sync/invalidation
  GFS2: Remove test which is always true
  GFS2: Remove gfs2_quota_change_host structure
  ...

fail_migrate_page() isn't used anywhere, so remove it.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>