commit c4a30537 upstream.

Caller (generic PCI code) already do proper locking so no need to add
another one here.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7601/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 48dc5fb3 upstream.

The driver reads a value from hfa384x_from_bap(), which may fail,
and then assigns the value to a local variable. gcc detects that
in in the failure case, the 'rlen' variable now contains
uninitialized data:

In file included from ../drivers/net/wireless/intersil/hostap/hostap_pci.c:220:0:
drivers/net/wireless/intersil/hostap/hostap_hw.c: In function 'hfa384x_get_rid':
drivers/net/wireless/intersil/hostap/hostap_hw.c:842:5: warning: 'rec' may be used uninitialized in this function [-Wmaybe-uninitialized]
  if (le16_to_cpu(rec.len) == 0) {

This restructures the function as suggested by Russell King, to
make it more readable and get more reliable error handling, by
handling each failure mode using a goto.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 769105aa upstream.

The loop for measuring the square wave periods over some cycles is
refactored to be more easily readable. This includes avoiding a
"by-hand-implemented" for loop with a "real" one and adding some
comments.

Furthermore the following compiler warning is avoided by this patch:
drivers/misc/ioc4.c: In function ‘ioc4_probe’:
drivers/misc/ioc4.c:194:16: warning: ‘start’ may be used uninitialized
in this function [-Wmaybe-uninitialized]
  period = (end - start) /
                ^
drivers/misc/ioc4.c:148:11: note: ‘start’ was declared here
  uint64_t start, end, period;
           ^
Signed-off-by: Richard Leitner <dev@g0hl1n.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 57e7c8ce upstream.

When CONFIG_PCI_MSI is disabled, we get warnings about unused functions
in the vxge driver:

drivers/net/ethernet/neterion/vxge/vxge-main.c:2121:13: warning: 'adaptive_coalesce_tx_interrupts' defined but not used [-Wunused-function]
drivers/net/ethernet/neterion/vxge/vxge-main.c:2149:13: warning: 'adaptive_coalesce_rx_interrupts' defined but not used [-Wunused-function]

We could add another #ifdef here, but it's nicer to avoid those warnings
for good by converting the existing #ifdef to if(IS_ENABLED()), which has
the same effect but provides better compile-time coverage in general,
and lets the compiler understand better when the function is intentionally
unused.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a4f642a8 upstream.

The nozomi wireless data driver has its own helper function to
transfer data from a FIFO, doing an extra byte swap on big-endian
architectures, presumably to bring the data back into byte-serial
order after readw() or readl() perform their implicit byteswap.

This helper function is used in the receive_data() function to
first read the length into a 32-bit variable, which causes
a compile-time warning:

drivers/tty/nozomi.c: In function 'receive_data':
drivers/tty/nozomi.c:857:9: warning: 'size' may be used uninitialized in this function [-Wmaybe-uninitialized]

The problem is that gcc is unsure whether the data was actually
read or not. We know that it is at this point, so we can replace
it with a single readl() to shut up that warning.

I am leaving the byteswap in there, to preserve the existing
behavior, even though this seems fishy: Reading the length of
the data into a cpu-endian variable should normally not use
a second byteswap on big-endian systems, unless the hardware
is aware of the CPU endianess.

There appears to be a lot more confusion about endianess in this
driver, so it probably has not worked on big-endian systems in
a long time, if ever, and I have no way to test it. It's well
possible that this driver has not been used by anyone in a while,
the last patch that looks like it was tested on the hardware is
from 2008.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 22f44150 upstream.

gcc-5.0 gained a new warning in the fwsignal portion of the brcmfmac
driver:

drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c: In function 'brcmf_fws_txs_process':
drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized]

This is a false positive, and marking the brcmf_fws_hanger_poppkt function
as 'static inline' makes the warning go away. I have checked the object
file output and while a little code gets moved around, the size of
the binary remains identical.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 97c7134a upstream.

Commit 2ae83bf9 ("[CIFS] Fix setting time before epoch (negative
time values)") changed "u64 t" to "s64 t", which makes do_div() complain
about a pointer signedness mismatch:

      CC      fs/cifs/netmisc.o
    In file included from ./arch/mips/include/asm/div64.h:12:0,
                     from include/linux/kernel.h:124,
                     from include/linux/list.h:8,
                     from include/linux/wait.h:6,
                     from include/linux/net.h:23,
                     from fs/cifs/netmisc.c:25:
    fs/cifs/netmisc.c: In function ‘cifs_NTtimeToUnix’:
    include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast [enabled by default]
      (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \
                                ^
    fs/cifs/netmisc.c:941:22: note: in expansion of macro ‘do_div’
       ts.tv_nsec = (long)do_div(t, 10000000) * 100;

Introduce a temporary "u64 abs_t" variable to fix this.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6ac75368 upstream.

gcc-5.0 warns about a potential uninitialized variable use in nfsd:

fs/nfsd/nfs4state.c: In function 'nfsd4_process_open2':
fs/nfsd/nfs4state.c:3781:3: warning: 'old_deny_bmap' may be used uninitialized in this function [-Wmaybe-uninitialized]
   reset_union_bmap_deny(old_deny_bmap, stp);
   ^
fs/nfsd/nfs4state.c:3760:16: note: 'old_deny_bmap' was declared here
  unsigned char old_deny_bmap;
                ^

This is a false positive, the code path that is warned about cannot
actually be reached.

This adds an initialization for the variable to make the warning go
away.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit be513698 upstream.

There are certain places where the code uses .set mips32 or .set mips64
or .set arch=r4000. In preparation of MIPS R6 support, and in order to
use as less #ifdefs as possible, we define new macros to set similar
annotations for MIPS R6.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2f5281ba upstream.

cpmac_start_xmit() used the max() macro on skb->len (an unsigned int)
and ETH_ZLEN (a signed int literal). This led to the following compiler
warning:

  In file included from include/linux/list.h:8:0,
                   from include/linux/module.h:9,
                   from drivers/net/ethernet/ti/cpmac.c:19:
  drivers/net/ethernet/ti/cpmac.c: In function 'cpmac_start_xmit':
  include/linux/kernel.h:748:17: warning: comparison of distinct pointer
  types lacks a cast
    (void) (&_max1 == &_max2);  \
                   ^
  drivers/net/ethernet/ti/cpmac.c:560:8: note: in expansion of macro 'max'
    len = max(skb->len, ETH_ZLEN);
          ^

On top of this, it assigned the result of the max() macro to a signed
integer whilst all further uses of it result in it being cast to varying
widths of unsigned integer.

Fix this up by using max_t to ensure the comparison is performed as
unsigned integers, and for consistency change the type of the len
variable to unsigned int.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 90cae1fe upstream.

As a part of memory initialisation the architecture passes an array to
free_area_init_nodes() which specifies the max PFN of each memory zone.
This array is not necessarily monotonic (due to unused zones) so this
array is parsed to build monotonic lists of the min and max PFN for each
zone.  ZONE_MOVABLE is special cased here as its limits are managed by
the mm subsystem rather than the architecture.  Unfortunately, this
special casing is broken when ZONE_MOVABLE is the not the last zone in
the zone list.  The core of the issue is:

	if (i == ZONE_MOVABLE)
		continue;
	arch_zone_lowest_possible_pfn[i] =
		arch_zone_highest_possible_pfn[i-1];

As ZONE_MOVABLE is skipped the lowest_possible_pfn of the next zone will
be set to zero.  This patch fixes this bug by adding explicitly tracking
where the next zone should start rather than relying on the contents
arch_zone_highest_possible_pfn[].

Thie is low priority.  To get bitten by this you need to enable a zone
that appears after ZONE_MOVABLE in the zone_type enum.  As far as I can
tell this means running a kernel with ZONE_DEVICE or ZONE_CMA enabled,
so I can't see this affecting too many people.

I only noticed this because I've been fiddling with ZONE_DEVICE on
powerpc and 4.6 broke my test kernel.  This bug, in conjunction with the
changes in Taku Izumi's kernelcore=mirror patch (d91749c1) and
powerpc being the odd architecture which initialises max_zone_pfn[] to
~0ul instead of 0 caused all of system memory to be placed into
ZONE_DEVICE at boot, followed a panic since device memory cannot be used
for kernel allocations.  I've already submitted a patch to fix the
powerpc specific bits, but I figured this should be fixed too.

Link: http://lkml.kernel.org/r/1462435033-15601-1-git-send-email-oohall@gmail.comSigned-off-by: Oliver O'Halloran <oohall@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 509fca89 upstream.

Unused after commit 71684406 ("iommu/vt-d: Detach domain *only*
from attached iommus").  Reported by 0-day builder.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c7757074 upstream.

The brand new GCC 5.1.0 warns by default on using a boolean in the
switch condition. This results in the following warning:

fs/nfs/nfs4proc.c: In function 'nfs4_proc_get_rootfh':
fs/nfs/nfs4proc.c:3100:10: warning: switch condition has boolean value [-Wswitch-bool]
  switch (auth_probe) {
          ^

This code was obviously using switch to make use of the fall-through
semantics (without the usual comment, though).
Rewrite that code using if statements to avoid the warning and make
the code a bit more readable on the way.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 86038c5e upstream.

Both Linus (most recent) and Steve (a while ago) reported that perf
related callbacks have massive stack bloat.

The problem is that software events need a pt_regs in order to
properly report the event location and unwind stack. And because we
could not assume one was present we allocated one on stack and filled
it with minimal bits required for operation.

Now, pt_regs is quite large, so this is undesirable. Furthermore it
turns out that most sites actually have a pt_regs pointer available,
making this even more onerous, as the stack space is pointless waste.

This patch addresses the problem by observing that software events
have well defined nesting semantics, therefore we can use static
per-cpu storage instead of on-stack.

Linus made the further observation that all but the scheduler callers
of perf_sw_event() have a pt_regs available, so we change the regular
perf_sw_event() to require a valid pt_regs (where it used to be
optional) and add perf_sw_event_sched() for the scheduler.

We have a scheduler specific call instead of a more generic _noregs()
like construct because we can assume non-recursion from the scheduler
and thereby simplify the code further (_noregs would have to put the
recursion context call inline in order to assertain which __perf_regs
element to use).

One last note on the implementation of perf_trace_buf_prepare(); we
allow .regs = NULL for those cases where we already have a pt_regs
pointer available and do not need another.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/20141216115041.GW3337@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5b235dc2 upstream.

Somehow the wrong version of the patch to remove the use of custom
gpio.h on mips has been merged. This patch add the missing fixes for a
build error on jz4740 because linux/gpio.h doesn't provide any machine
specfics definitions anymore.
Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11089/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips-gcc-5.3 warns about correct code on linux-3.18 and earlier:

In file included from ../include/linux/blkdev.h:4:0,
                 from ../drivers/md/dm-bufio.h:12,
                 from ../drivers/md/dm-bufio.c:9:
../drivers/md/dm-bufio.c: In function 'alloc_buffer':
../include/linux/sched.h:1975:56: warning: 'noio_flag' may be used uninitialized in this function [-Wmaybe-uninitialized]
  current->flags = (current->flags & ~PF_MEMALLOC_NOIO) | flags;
                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
../drivers/md/dm-bufio.c:325:11: note: 'noio_flag' was declared here

The warning disappeared on later kernels with this commit: be0c37c9
("MIPS: Rearrange PTE bits into fixed positions.")  I assume this only
happened because it changed some inlining decisions.

On 3.18.y, we can shut up the warning by adding an extra initialization.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc warns about a bug in 3.18.y:

drivers/usb/gadget/legacy/inode.c:648:10: warning: 'value' may be used

This is caused by the backport of f01d35a1 from 4.0 to 3.18:
c81fc59b gadgetfs: use-after-free in ->aio_read()

The backported patch was buggy, but the mainline code was rewritten
in a larger patch directly following this one in a way that fixed the
bug.

For stable, we should need only a one-line change to make sure we
return an proper error code. It is very unlikely that anybody ever
ran into the out-of-memory case here in practice, but the compiler
is right in theory.

Fixes: c81fc59b ("gadgetfs: use-after-free in ->aio_read()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We had an incorrect backport of
45912431 ("clk: at91: usb: propagate rate modification to the parent clk")
that was fixed incorrectly in linux-3.18.y by
76723e7e ("clk: at91: usb: fix determine_rate prototype")

as shown by this warning:

drivers/clk/at91/clk-usb.c:155:20: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
drivers/clk/at91/clk-usb.c:193:20: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]

This should fix it properly.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7d9e8f71 upstream.

Generally, taking an unexpected exception should be a fatal event, and
bad_mode is intended to cater for this. However, it should be possible
to contain unexpected synchronous exceptions from EL0 without bringing
the kernel down, by sending a SIGILL to the task.

We tried to apply this approach in commit 9955ac47 ("arm64:
don't kill the kernel on a bad esr from el0"), by sending a signal for
any bad_mode call resulting from an EL0 exception.

However, this also applies to other unexpected exceptions, such as
SError and FIQ. The entry paths for these exceptions branch to bad_mode
without configuring the link register, and have no kernel_exit. Thus, if
we take one of these exceptions from EL0, bad_mode will eventually
return to the original user link register value.

This patch fixes this by introducing a new bad_el0_sync handler to cater
for the recoverable case, and restoring bad_mode to its original state,
whereby it calls panic() and never returns. The recoverable case
branches to bad_el0_sync with a bl, and returns to userspace via the
usual ret_to_user mechanism.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 9955ac47 ("arm64: don't kill the kernel on a bad esr from el0")
Reported-by: Mark Salter <msalter@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8b3405e3 upstream.

In kvm_free_stage2_pgd() we don't hold the kvm->mmu_lock while calling
unmap_stage2_range() on the entire memory range for the guest. This could
cause problems with other callers (e.g, munmap on a memslot) trying to
unmap a range. And since we have to unmap the entire Guest memory range
holding a spinlock, make sure we yield the lock if necessary, after we
unmap each PUD range.

Fixes: commit d5d8184d ("KVM: ARM: Memory virtualization setup")
Cc: Paolo Bonzini <pbonzin@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[ Avoid vCPU starvation and lockup detector warnings ]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 29f72ce3 upstream.

MCA bank 3 is reserved on systems pre-Fam17h, so it didn't have a name.
However, MCA bank 3 is defined on Fam17h systems and can be accessed
using legacy MSRs. Without a name we get a stack trace on Fam17h systems
when trying to register sysfs files for bank 3 on kernels that don't
recognize Scalable MCA.

Call MCA bank 3 "decode_unit" since this is what it represents on
Fam17h. This will allow kernels without SMCA support to see this bank on
Fam17h+ and prevent the stack trace. This will not affect older systems
since this bank is reserved on them, i.e. it'll be ignored.

Tested on AMD Fam15h and Fam17h systems.

  WARNING: CPU: 26 PID: 1 at lib/kobject.c:210 kobject_add_internal
  kobject: (ffff88085bb256c0): attempted to be registered with empty name!
  ...
  Call Trace:
   kobject_add_internal
   kobject_add
   kobject_create_and_add
   threshold_create_device
   threshold_init_device
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1490102285-3659-1-git-send-email-Yazen.Ghannam@amd.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9e1ba4f2 upstream.

If we set a kprobe on a 'stdu' instruction on powerpc64, we see a kernel
OOPS:

  Bad kernel stack pointer cd93c840 at c000000000009868
  Oops: Bad kernel stack pointer, sig: 6 [#1]
  ...
  GPR00: c000001fcd93cb30 00000000cd93c840 c0000000015c5e00 00000000cd93c840
  ...
  NIP [c000000000009868] resume_kernel+0x2c/0x58
  LR [c000000000006208] program_check_common+0x108/0x180

On a 64-bit system when the user probes on a 'stdu' instruction, the kernel does
not emulate actual store in emulate_step() because it may corrupt the exception
frame. So the kernel does the actual store operation in exception return code
i.e. resume_kernel().

resume_kernel() loads the saved stack pointer from memory using lwz, which only
loads the low 32-bits of the address, causing the kernel crash.

Fix this by loading the 64-bit value instead.

Fixes: be96f633 ("powerpc: Split out instruction analysis part of emulate_step()")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
[mpe: Change log massage, add stable tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9cd9a21c upstream.

In commit 6afaf8a4 ("UBI: flush wl before clearing update marker") I
managed to trigger and fix a similar bug. Now here is another version of
which I assumed it wouldn't matter back then but it turns out UBI has a
check for it and will error out like this:

|ubi0 warning: validate_vid_hdr: inconsistent used_ebs
|ubi0 error: validate_vid_hdr: inconsistent VID header at PEB 592

All you need to trigger this is? "ubiupdatevol /dev/ubi0_0 file" + a
powercut in the middle of the operation.
ubi_start_update() sets the update-marker and puts all EBs on the erase
list. After that userland can proceed to write new data while the old EB
aren't erased completely. A powercut at this point is usually not that
much of a tragedy. UBI won't give read access to the static volume
because it has the update marker. It will most likely set the corrupted
flag because it misses some EBs.
So we are all good. Unless the size of the image that has been written
differs from the old image in the magnitude of at least one EB. In that
case UBI will find two different values for `used_ebs' and refuse to
attach the image with the error message mentioned above.

So in order not to get in the situation, the patch will ensure that we
wait until everything is removed before it tries to write any data.
The alternative would be to detect such a case and remove all EBs at the
attached time after we processed the volume-table and see the
update-marker set. The patch looks bigger and I doubt it is worth it
since usually the write() will wait from time to time for a new EB since
usually there not that many spare EB that can be used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9f327845 upstream.

Currently for DDR50 card, it need tuning in default. We meet tuning fail
issue for DDR50 card and some data CRC error when DDR50 sd card works.

This is because the default pad I/O drive strength can't make sure DDR50
card work stable. So increase the pad I/O drive strength for DDR50 card,
and use pins_100mhz.

This fixes DDR50 card support for IMX since DDR50 tuning was enabled from
commit 9faac7b9 ("mmc: sdhci: enable tuning for DDR50")
Tested-and-reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fe8c470a upstream.

gcc -O2 cannot always prove that the loop in acpi_power_get_inferred_state()
is enterered at least once, so it assumes that cur_state might not get
initialized:

drivers/acpi/power.c: In function 'acpi_power_get_inferred_state':
drivers/acpi/power.c:222:9: error: 'cur_state' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This sets the variable to zero at the start of the loop, to ensure that
there is well-defined behavior even for an empty list. This gets rid of
the warning.

The warning first showed up when the -Os flag got removed in a bug fix
patch in linux-4.11-rc5.

I would suggest merging this addon patch on top of that bug fix to avoid
introducing a new warning in the stable kernels.

Fixes: 61b79e16 (ACPI: Fix incompatibility with mcount-based function graph tracing)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 704de489 upstream.

Temporary got a Lifebook E547 into my hands and noticed the touchpad
only works after running:

	echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled

Add it to the list of machines that need this workaround.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a8f60d1f upstream.

On heavy paging with KSM I see guest data corruption. Turns out that
KSM will add pages to its tree, where the mapping return true for
pte_unused (or might become as such later).  KSM will unmap such pages
and reinstantiate with different attributes (e.g. write protected or
special, e.g. in replace_page or write_protect_page)). This uncovered
a bug in our pagetable handling: We must remove the unused flag as
soon as an entry becomes present again.
Signed-of-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a0918f1c upstream.

STATUS_BAD_NETWORK_NAME can be received during node failover,
causing the flag to be set and making the reconnect thread
always unsuccessful, thereafter.

Once the only place where it is set is removed, the remaining
bits are rendered moot.

Removing it does not prevent "mount" from failing when a non
existent share is passed.

What happens when the share really ceases to exist while the
share is mounted is undefined now as much as it was before.
Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 62a6cfdd upstream.

commit 4fcd1813 ("Fix reconnect to not defer smb3 session reconnect
long after socket reconnect") added support for Negotiate requests to
be initiated by echo calls.

To avoid delays in calling echo after a reconnect, I added the patch
introduced by the commit b8c60012 ("Call echo service immediately
after socket reconnect").

This has however caused a regression with cifs shares which do not have
support for echo calls to trigger Negotiate requests. On connections
which need to call Negotiation, the echo calls trigger an error which
triggers a reconnect which in turn triggers another echo call. This
results in a loop which is only broken when an operation is performed on
the cifs share. For an idle share, it can DOS a server.

The patch uses the smb_operation can_echo() for cifs so that it is
called only if connection has been already been setup.

kernel bz: 194531
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 78f7a45d upstream.

I noticed that reading the snapshot file when it is empty no longer gives a
status. It suppose to show the status of the snapshot buffer as well as how
to allocate and use it. For example:

 ># cat snapshot
 # tracer: nop
 #
 #
 # * Snapshot is allocated *
 #
 # Snapshot commands:
 # echo 0 > snapshot : Clears and frees snapshot buffer
 # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
 #                      Takes a snapshot of the main buffer.
 # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
 #                      (Doesn't have to be '2' works with any number that
 #                       is not a '0' or '1')

But instead it just showed an empty buffer:

 ># cat snapshot
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 0/0   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |

What happened was that it was using the ring_buffer_iter_empty() function to
see if it was empty, and if it was, it showed the status. But that function
was returning false when it was empty. The reason was that the iter header
page was on the reader page, and the reader page was empty, but so was the
buffer itself. The check only tested to see if the iter was on the commit
page, but the commit page was no longer pointing to the reader page, but as
all pages were empty, the buffer is also.

Fixes: 651e22f2 ("ring-buffer: Always reset iterator to reader page")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit df62db5b upstream.

Currently the snapshot trigger enables the probe and then allocates the
snapshot. If the probe triggers before the allocation, it could cause the
snapshot to fail and turn tracing off. It's best to allocate the snapshot
buffer first, and then enable the trigger. If something goes wrong in the
enabling of the trigger, the snapshot buffer is still allocated, but it can
also be freed by the user by writting zero into the snapshot buffer file.

Also add a check of the return status of alloc_snapshot().

Fixes: 77fd5c15 ("tracing: Add snapshot trigger to function probes")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c9f838d1 upstream.

This fixes CVE-2017-7472.

Running the following program as an unprivileged user exhausts kernel
memory by leaking thread keyrings:

	#include <keyutils.h>

	int main()
	{
		for (;;)
			keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_THREAD_KEYRING);
	}

Fix it by only creating a new thread keyring if there wasn't one before.
To make things more consistent, make install_thread_keyring_to_cred()
and install_process_keyring_to_cred() both return 0 if the corresponding
keyring is already present.

Fixes: d84f4f99 ("CRED: Inaugurate COW credentials")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c1644fe0 upstream.

This fixes CVE-2017-6951.

Userspace should not be able to do things with the "dead" key type as it
doesn't have some of the helper functions set upon it that the kernel
needs.  Attempting to use it may cause the kernel to crash.

Fix this by changing the name of the type to ".dead" so that it's rejected
up front on userspace syscalls by key_get_type_from_user().

Though this doesn't seem to affect recent kernels, it does affect older
ones, certainly those prior to:

	commit c06cfb08
	Author: David Howells <dhowells@redhat.com>
	Date:   Tue Sep 16 17:36:06 2014 +0100
	KEYS: Remove key_type::match in favour of overriding default by match_preparse

which went in before 3.18-rc1.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ee8f844e upstream.

This fixes CVE-2016-9604.

Keyrings whose name begin with a '.' are special internal keyrings and so
userspace isn't allowed to create keyrings by this name to prevent
shadowing.  However, the patch that added the guard didn't fix
KEYCTL_JOIN_SESSION_KEYRING.  Not only can that create dot-named keyrings,
it can also subscribe to them as a session keyring if they grant SEARCH
permission to the user.

This, for example, allows a root process to set .builtin_trusted_keys as
its session keyring, at which point it has full access because now the
possessor permissions are added.  This permits root to add extra public
keys, thereby bypassing module verification.

This also affects kexec and IMA.

This can be tested by (as root):

	keyctl session .builtin_trusted_keys
	keyctl add user a a @s
	keyctl list @s

which on my test box gives me:

	2 keys in keyring:
	180010936: ---lswrv     0     0 asymmetric: Build time autogenerated kernel key: ae3d4a31b82daa8e1a75b49dc2bba949fd992a05
	801382539: --alswrv     0     0 user: a


Fix this by rejecting names beginning with a '.' in the keyctl.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
cc: linux-ima-devel@lists.sourceforge.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 474c9015 upstream.

gcc-7 has an "optimization" pass that completely screws up, and
generates the code expansion for the (impossible) case of calling
ilog2() with a zero constant, even when the code gcc compiles does not
actually have a zero constant.

And we try to generate a compile-time error for anybody doing ilog2() on
a constant where that doesn't make sense (be it zero or negative).  So
now gcc7 will fail the build due to our sanity checking, because it
created that constant-zero case that didn't actually exist in the source
code.

There's a whole long discussion on the kernel mailing about how to work
around this gcc bug.  The gcc people themselevs have discussed their
"feature" in

   https://gcc.gnu.org/bugzilla/show_bug.cgi?id=72785

but it's all water under the bridge, because while it looked at one
point like it would be solved by the time gcc7 was released, that was
not to be.

So now we have to deal with this compiler braindamage.

And the only simple approach seems to be to just delete the code that
tries to warn about bad uses of ilog2().

So now "ilog2()" will just return 0 not just for the value 1, but for
any non-positive value too.

It's not like I can recall anybody having ever actually tried to use
this function on any invalid value, but maybe the sanity check just
meant that such code never made it out in public.
Reported-by: Laura Abbott <labbott@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>,
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b884a190 upstream.

The rapf copy loops in the Meta usercopy code is missing some extable
entries for HTP cores with unaligned access checking enabled, where
faults occur on the instruction immediately after the faulting access.

Add the fixup labels and extable entries for these cases so that corner
case user copy failures don't cause kernel crashes.

Fixes: 373cd784 ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2c0b1df8 upstream.

The fixup code to rewind the source pointer in
__asm_copy_from_user_{32,64}bit_rapf_loop() always rewound the source by
a single unit (4 or 8 bytes), however this is insufficient if the fault
didn't occur on the first load in the loop, as the source pointer will
have been incremented but nothing will have been stored until all 4
register [pairs] are loaded.

Read the LSM_STEP field of TXSTATUS (which is already loaded into a
register), a bit like the copy_to_user versions, to determine how many
iterations of MGET[DL] have taken place, all of which need rewinding.

Fixes: 373cd784 ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fd40eee1 upstream.

The fixup code for the copy_to_user rapf loops reads TXStatus.LSM_STEP
to decide how far to rewind the source pointer. There is a special case
for the last execution of an MGETL/MGETD, since it leaves LSM_STEP=0
even though the number of MGETLs/MGETDs attempted was 4. This uses ADDZ
which is conditional upon the Z condition flag, but the AND instruction
which masked the TXStatus.LSM_STEP field didn't set the condition flags
based on the result.

Fix that now by using ANDS which does set the flags, and also marking
the condition codes as clobbered by the inline assembly.

Fixes: 373cd784 ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 563ddc10 upstream.

Currently we try to zero the destination for a failed read from userland
in fixup code in the usercopy.c macros. The rest of the destination
buffer is then zeroed from __copy_user_zeroing(), which is used for both
copy_from_user() and __copy_from_user().

Unfortunately we fail to zero in the fixup code as D1Ar1 is set to 0
before the fixup code entry labels, and __copy_from_user() shouldn't even
be zeroing the rest of the buffer.

Move the zeroing out into copy_from_user() and rename
__copy_user_zeroing() to raw_copy_from_user() since it no longer does
any zeroing. This also conveniently matches the name needed for
RAW_COPY_USER support in a later patch.

Fixes: 373cd784 ("metag: Memory handling")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>