- 06 Dec, 2016 11 commits
-
-
Jeff Mahoney authored
Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Jeff Mahoney authored
Signed-off-by:
-
Jeff Mahoney authored
We track the node sizes per-root, but they never vary from the values in the superblock. This patch messes with the 80-column style a bit, but subsequent patches to factor out root->fs_info into a convenience variable fix it up again. Signed-off-by:
-
Jeff Mahoney authored
The io_ctl->root member was only being used to access root->fs_info. Signed-off-by:
-
Jeff Mahoney authored
Signed-off-by:
-
Jeff Mahoney authored
The root is never used. We substitute extent_root in for the reada_find_extent call, since it's only ever used to obtain the node size. This call site will be changed to use fs_info in a later patch. Signed-off-by:
-
Jeff Mahoney authored
The root member is never used except for obtaining an fs_info pointer. Signed-off-by:
-
Jeff Mahoney authored
Even though a separate root is passed in, we're still operating on the extent root. Let's use that for the trace point. Signed-off-by:
-
Jeff Mahoney authored
btrfs_init_new_device only uses the root passed in via the ioctl to start the transaction. Nothing else that happens is related to whatever root the user used to initiate the ioctl. We can drop the root requirement and just use fs_info->dev_root instead. Signed-off-by:
-
Jeff Mahoney authored
There are many functions that are always called with the same root argument. Rather than passing the same root every time, we can pass an fs_info pointer instead and have the function get the root pointer itself. Signed-off-by:
-
Jeff Mahoney authored
There are 11 functions that accept a root parameter and immediately overwrite it. We can pass those an fs_info pointer instead. Signed-off-by:
-
- 30 Nov, 2016 29 commits
-
-
David Sterba authored
-
Wang Xiaoguang authored
This issue was found when I tried to delete a heavily reflinked file, when deleting such files, other transaction operation will not have a chance to make progress, for example, start_transaction() will blocked in wait_current_trans(root) for long time, sometimes it even triggers soft lockups, and the time taken to delete such heavily reflinked file is also very large, often hundreds of seconds. Using perf top, it reports that: PerfTop: 7416 irqs/sec kernel:99.8% exact: 0.0% [4000Hz cpu-clock], (all, 4 CPUs) --------------------------------------------------------------------------------------- 84.37% [btrfs] [k] __btrfs_run_delayed_refs.constprop.80 11.02% [kernel] [k] delay_tsc 0.79% [kernel] [k] _raw_spin_unlock_irq 0.78% [kernel] [k] _raw_spin_unlock_irqrestore 0.45% [kernel] [k] do_raw_spin_lock 0.18% [kernel] [k] __slab_alloc It seems __btrfs_run_delayed_refs() took most cpu time, after some debug work, I found it's select_delayed_ref() causing this issue, for a delayed head, in our case, it'll be full of BTRFS_DROP_DELAYED_REF nodes, but select_delayed_ref() will firstly try to iterate node list to find BTRFS_ADD_DELAYED_REF nodes, obviously it's a disaster in this case, and waste much time. To fix this issue, we introduce a new ref_add_list in struct btrfs_delayed_ref_head, then in select_delayed_ref(), if this list is not empty, we can directly use nodes in this list. With this patch, it just took about 10~15 seconds to delte the same file. Now using perf top, it reports that: PerfTop: 2734 irqs/sec kernel:99.5% exact: 0.0% [4000Hz cpu-clock], (all, 4 CPUs) ---------------------------------------------------------------------------------------- 20.74% [kernel] [k] _raw_spin_unlock_irqrestore 16.33% [kernel] [k] __slab_alloc 5.41% [kernel] [k] lock_acquired 4.42% [kernel] [k] lock_acquire 4.05% [kernel] [k] lock_release 3.37% [kernel] [k] _raw_spin_unlock_irq For normal files, this patch also gives help, at least we do not need to iterate whole list to found BTRFS_ADD_DELAYED_REF nodes. Signed-off-by:Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Tested-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by:
-
Qu Wenruo authored
Commit 62b99540 (btrfs: relocation: Fix leaking qgroups numbers on data extents) only fixes the problem partly. The previous fix is to trace all new data extents at transaction commit time when balance finishes. However balance is not done in a large transaction, every path replacement can happen in its own transaction. This makes the fix useless if transaction commits during relocation. For example: relocate_block_group() |-merge_reloc_roots() | |- merge_reloc_root() | |- btrfs_start_transaction() <- Trans X | |- replace_path() <- Cause leak | |- btrfs_end_transaction_throttle() <- Trans X commits here | | Leak not fixed | | | |- btrfs_start_transaction() <- Trans Y | |- replace_path() <- Cause leak | |- btrfs_end_transaction_throttle() <- Trans Y ends | but not committed |-btrfs_join_transaction() <- Still trans Y |-qgroup_fix() <- Only fixes data leak | in trans Y |-btrfs_commit_transaction() <- Trans Y commits In that case, qgroup fixup can only fix data leak in trans Y, data leak in trans X is out of fix. So the correct fix should happen in the same transaction of replace_path(). This patch fixes it by tracing both subtrees of tree block swap, so it can fix the problem and ensure all leaking and fix are in the same transaction, so no leak again. Reported-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-and-Tested-by:
-
Qu Wenruo authored
Move account_shared_subtree() to qgroup.c and rename it to btrfs_qgroup_trace_subtree(). Do the same thing for account_leaf_items() and rename it to btrfs_qgroup_trace_leaf_items(). Since all these functions are only for qgroup, move them to qgroup.c and export them is more appropriate. Signed-off-by:
-
Qu Wenruo authored
Rename btrfs_qgroup_insert_dirty_extent(_nolock) to btrfs_qgroup_trace_extent(_nolock), according to the new reserve/trace/account naming schema. Signed-off-by:
-
Qu Wenruo authored
Add explaination how btrfs qgroups work. Qgroup is split into 3 main phrases: 1) Reserve To ensure qgroup doesn't exceed its limit 2) Trace To info qgroup to trace which extent 3) Account Calculate qgroup number change for each traced extent. This should save quite some time for new developers. Signed-off-by:
-
Christoph Hellwig authored
And remove the bogus check for a NULL return value from kmap, which can't happen. While we're at it: I don't think that kmapping up to 256 will work without deadlocks on highmem machines, a better idea would be to use vm_map_ram to map all of them into a single virtual address range. Incidentally that would also simplify the code a lot. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Christoph Hellwig authored
Rework the loop a little bit to use the generic bio_for_each_segment_all helper for iterating over the bio. Signed-off-by:
-
Christoph Hellwig authored
Use the bvec offset and len members to prepare for multipage bvecs. Signed-off-by:
-
Christoph Hellwig authored
Instead of using bi_vcnt to calculate it. Signed-off-by:
-
Christoph Hellwig authored
Use bio_for_each_segment_all to iterate over the segments instead. This requires a bit of reshuffling so that we only lookup up the ordered item once inside the bio_for_each_segment_all loop. Signed-off-by:
-
Christoph Hellwig authored
Just use bio_for_each_segment_all to iterate over all segments. Signed-off-by:
-
Christoph Hellwig authored
Just use bio_for_each_segment_all to iterate over all segments. Signed-off-by:
-
Christoph Hellwig authored
Pass the full bio to the decompression routines and use bio iterators to iterate over the data in the bio. Signed-off-by:
-
Jeff Mahoney authored
This fixes the WARN_ON on BTRFS_I(inode)->reserved_extents in btrfs_destroy_inode and the WARN_ON on nonzero delalloc bytes on umount with qgroups enabled. I was able to reproduce this by setting up a small (~500kb) quota limit and writing a file one byte at a time until I hit the limit. The warnings would all hit on umount. The root cause is that we would reserve a block-sized range in both the reservation and the quota in btrfs_check_data_free_space, but if we encountered a problem (like e.g. EDQUOT), we would only release the single byte in the qgroup reservation. That caused an iotree state split, which increased the number of outstanding extents, in turn disallowing releasing the metadata reservation. Signed-off-by:
-
Josef Bacik authored
At this point we will have dropped extent entries from the file, so if we fail to insert the new hole entries then we are leaving the fs in a corrupt state (albeit an easily fixed one). Abort the transaciton if this happens so we can avoid corrupting the fs. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Josef Bacik authored
In order to do hole punching we have a block reserve to hold the reservation we need to drop the extents in our range. Since we could end up dropping a lot of extents we set rsv->failfast so we can just loop around again and drop the remaining of the range. Unfortunately we unconditionally fill the hole extents in and start from the last extent we encountered, which we may or may not have dropped. So this can result in overlapping file extent entries, which can be tripped over in a variety of ways, either by hitting BUG_ON(!ret) in fill_holes() after the search, or in btrfs_set_item_key_safe() in btrfs_drop_extent() at a later time by an unrelated task. Fix this by only setting drop_end to the last extent we did actually drop. This way our holes are filled in properly for the range that we did drop, and the rest of the range that remains to be dropped is actually dropped. Thanks, Signed-off-by:
-
Jeff Mahoney authored
If we process the last item in the leaf and hit an I/O error while reading the next leaf, we return -EIO without having adjusted the position. Since we have emitted dirents, getdents() will return the byte count to the user instead of the error. Subsequent callers will emit the last successful dirent again, and return -EIO again, with the same result. Callers loop forever. Instead, if we always increment ctx->pos after emitting or skipping the dirent, we'll be sure that we won't hit the same one again. When we go to process the next leaf, we won't have emitted any dirents and the -EIO will be returned to the user properly. We also don't need to track if we've emitted a dirent already or if we've changed the position yet. Signed-off-by:
-
Jeff Mahoney authored
Commit 3de4586c (Btrfs: Allow subvolumes and snapshots anywhere in the directory tree) introduced the current system of placing snapshots in the directory tree. It also introduced the behavior of creating the snapshot and then creating the directory entries for it. We've kept this code around for compatibility reasons, but it turns out that no file systems with the old tree_root based snapshots can be mounted on newer (>= 2009) kernels anyway. About a month after the above commit, commit 2a7108ad (Btrfs: rev the disk format for the inode compat and csum selection changes) landed, changing the superblock magic number. As a result, we know that we'll never encounter tree_root-based dirents or have to deal with skipping our own snapshot dirents. Since that also means that we're now only iterating over DIR_INDEX items, which only contain one directory entry per leaf item, we don't need to loop over the leaf item contents anymore either. Signed-off-by:
-
Nick Terrell authored
If zlib_inflateInit2 fails, the input page is never unmapped. Add a call to kunmap when it fails. Signed-off-by:
Nick Terrell <nickrterrell@gmail.com> Reviewed-by:
-
David Sterba authored
The balance status item contains currently known filter values, but the stripes filter was unintentionally not among them. This would mean, that interrupted and automatically restarted balance does not apply the stripe filters. Fixes: dee32d0a CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Christophe JAILLET authored
'btrfs_iget()' can not return NULL, so this test can be removed. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
-
Domagoj Tršan authored
csum member of struct btrfs_super_block has array type of u8. It makes sense that function btrfs_csum_final should be also declared to accept u8 *. I changed the declaration of method void btrfs_csum_final(u32 crc, char *result); to void btrfs_csum_final(u32 crc, u8 *result); Signed-off-by:
Domagoj Tršan <domagoj.trsan@gmail.com> [ changed cast to u8 at several call sites ] Signed-off-by:
-
Liu Bo authored
If we have |0--hole--4095||4096--preallocate--12287| instead of using preallocated space, a 8K direct write will just create a new 8K extent and it'll end up with |0--new extent--8191||8192--preallocate--12287| It's because we find a hole em and then go to create a new 8K extent directly without adjusting @len. Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Shailendra Verma authored
There is no need to call kfree() if memdup_user() fails, as no memory was allocated and the error in the error-valued pointer should be returned. Signed-off-by:
Shailendra Verma <shailendra.v@samsung.com> [ edit subject ] Signed-off-by:
-
David Sterba authored
Using copy_extent_buffer is suitable for copying betwenn buffers from an arbitrary offset and deals with page boundaries. This is not necessary when doing a full extent_buffer-to-extent_buffer copy. We can utilize the copy_page helper as well. Signed-off-by: -
David Sterba authored
The only memset we do is to 0, so sink the parameter to the function and simplify all calls. Rename the function to reflect the behaviour. Signed-off-by: -
David Sterba authored
The copy_page is usually optimized and can be faster than memcpy. Signed-off-by: -
David Sterba authored
Signed-off-by:
-
