- 22 Oct, 2020 4 commits
-
-
Maxime Ripard authored
If the DSI driver is the last to probe, component_add will try to run all the bind callbacks straight away and return the error code. However, since we depend on a power domain, we're pretty much guaranteed to be in that case on the BCM2711, and are just lucky on the previous SoCs since the v3d also depends on that power domain and is further in the probe order. In that case, the DSI host will not stick around in the system: the DSI bind callback will be executed, will not find any DSI device attached and will return EPROBE_DEFER, and we will then remove the DSI host and ask to be probed later on. But since that host doesn't stick around, DSI devices like the RaspberryPi touchscreen whose probe is not linked to the DSI host (unlike the usual DSI devices that will be probed through the call to mipi_dsi_host_register) cannot attach to the DSI host, and we thus end up in a situation where the DSI host cannot probe because the panel hasn't probed yet, and the panel cannot probe because the DSI host hasn't yet. In order to break this cycle, let's wait until there's a DSI device that attaches to the DSI host to register the component and allow to progress further. Acked-by:
Eric Anholt <eric@anholt.net> Suggested-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200707101912.571531-1-maxime@cerno.tech
-
Simon Ser authored
User-space should avoid parsing EDIDs for metadata already exposed via other KMS interfaces and properties. For instance, user-space should not try to extract a list of modes from the EDID: the kernel might mutate the mode list (because of link capabilities or quirks for instance). Other metadata not exposed by KMS can be parsed by user-space. This includes for instance monitor identification (make/model/serial) and supported color-spaces. v2: add short explanation why user-space shouldn't do this (Brian) Signed-off-by:
Simon Ser <contact@emersion.fr> Suggested-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Brian Starkey <brian.starkey@arm.com> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/V_APW3gKRhljvcmT28tGV3JkP7qW9Z7h45I-s2wiJvYhaaveCpYpg3tztZPsZVV2KV1NC7rUx08IUUgCJXzdRrWCsEGB0czq4ZozpdyVFLs=@emersion.fr
-
Dave Airlie authored
The move notify callback is only used in one place, this should be removed in the future, but for now just rename it to the use case which is to notify the driver that the GPU memory is to be deleted. Drivers can be cleaned up after this separately. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201021044031.1752624-2-airlied@gmail.com
-
Dave Airlie authored
Removed unused parameter. Reviewed-by:
-
- 21 Oct, 2020 8 commits
-
-
Daniel Vetter authored
It's the only ioctl handler purely for legacy drivers that didn't have this yet. Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Dave Airlie authored
This moves the call to tt binding into the driver move, and drops the driver callback. Reviewed-by:
-
Dave Airlie authored
The drivers now do this in the move callback. move_notify is still needed in the destroy path. Reviewed-by:
-
Dave Airlie authored
This show the remaining bind callback, which my next series of patches will aim to remove. Reviewed-by:
-
Dave Airlie authored
The drivers now control this, so drop unbinding. Reviewed-by:
-
Dave Airlie authored
This moves the to system move into the drivers, and moves all the unbinds in the move path under driver control Note: radeon/nouveau already wait so don't duplicate it. Reviewed-by:
-
Dave Airlie authored
resource free already sets the domain to system, and old_mem isn't really needed. Reviewed-by:
-
Dave Airlie authored
This just gives the driver control over some of the bind paths. Reviewed-by:
-
- 20 Oct, 2020 3 commits
-
-
Matteo Franchin authored
Add ABGR format with 10-bit components packed in 64-bit per pixel. This format can be used to handle VK_FORMAT_R10X6G10X6B10X6A10X6_UNORM_4PACK16 on little-endian architectures. Signed-off-by:
Matteo Franchin <matteo.franchin@arm.com> Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201012164043.23630-1-matteo.franchin@arm.com
-
Robin Murphy authored
Since commit 9495b7e9 ("driver core: platform: Initialize dma_parms for platform devices"), struct platform_device already provides a dma_parms structure, so we can save allocating another one. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Reviewed-by:
James Qian Wang <james.qian.wang@arm.com> [replaced DMA_BIT_MASK(32) with U32_MAX] Signed-off-by:
-
Daniel Vetter authored
Hooray for generic fbdev support, making this a oneliner. We just needed to fix preferred_depth fixed and the vmap support added first. This is useful for testing fbdev testcases in igt. Right now we only have a simple one in the fbdev testcases, which passes both info and mmap subtests. v2: Augment commit message as suggested by Melissa. Acked-by:
Melissa Wen <melissa.srw@gmail.com> Signed-off-by:
-
- 19 Oct, 2020 12 commits
-
-
Dave Airlie authored
The apis to move old/new are in place everywhere so this is no longer needed. Reviewed-by:
-
Dave Airlie authored
Uninline ttm_bo_move_ttm. Eventually want to unhook the unbind out. Reviewed-by:
Ben Skeggs <bskeggs@redhat.com> Reviewed-by:
-
Dave Airlie authored
In all 3 drivers there is a case where the driver knows the bo is in SYSTEM so don't call the api that checks that. Reviewed-by:
-
Dave Airlie authored
Reviewed-by:
-
Dave Airlie authored
This factors out the code to setup non-system tt. The same code was used twice in the move paths. Reviewed-by:
-
Neil Armstrong authored
This adds support for the TDO TL070WSH30 TFT-LCD panel module. The panel has a 1024×600 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200915121912.4347-5-narmstrong@baylibre.com
-
Neil Armstrong authored
This add the bindings for the 1024x600 TFT LCD TL070WSH30 DSI panel to panel-simple-dsi. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200915121912.4347-4-narmstrong@baylibre.com
-
Neil Armstrong authored
Simple DSI panels can also have a reset GPIO signal in addition/instead of an enable GPIO signal. This adds an optional reset-gpios property. Signed-off-by:
-
Neil Armstrong authored
Shanghai Top Display Optolelectronics Co., Ltd is a display manufacturer from Shanghai. Web site of the company: http://www.shtdo.com/Signed-off-by:
-
Dave Airlie authored
This isn't really used anymore, if drivers needs it later, just add back an inline wrapper. Reviewed-by:
-
Tian Tao authored
Consistently Use the same style of variable type in hibmc_drm_drv.c and hibmc_drm_drv.h. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Acked-by:
-
Tian Tao authored
Consistently Use the same style of variable type in hibmc_drm_de.c. Signed-off-by:
-
- 17 Oct, 2020 13 commits
-
-
Bernard Zhao authored
In function via_mem_alloc`s error branch, DRM_ERROR is protected in the mutex_lock(&dev->struct_mutex) area. >From the code, we see that DRM_ERROR is just an error log print without any struct element, there is no need to protect this. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
-
Krzysztof Kozlowski authored
platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: 179c02fe ("drm/tve200: Add new driver for TVE200") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: 5fc537bf ("drm/mcde: Add new driver for ST-Ericsson MCDE") Signed-off-by:
-
Jagan Teki authored
Add panel timings for YTC700TLAG-05-201C 7" TFT LCD panel from Yes Optoelectronics Co.,Ltd. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
-
Jagan Teki authored
Add dt-bindings for YTC700TLAG-05-201C 7" TFT LCD panel from Yes Optoelectronics Co.,Ltd. Signed-off-by:
-
Jagan Teki authored
Add vendor dt-bindings for Yes Optoelectronics Co.,Ltd. Signed-off-by:
-
Jason Yan authored
Eliminate the following coccicheck warning: drivers/video/fbdev/fsl-diu-fb.c:1428:5-8: Unneeded variable: "res". Return "0" on line 1450 Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Acked-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Jason Yan authored
Eliminate the following coccicheck warning: drivers/video/fbdev/sis/sis_accel.h:143:72-73: Unneeded semicolon drivers/video/fbdev/sis/sis_accel.h:144:72-73: Unneeded semicolon drivers/video/fbdev/sis/sis_accel.h:145:72-73: Unneeded semicolon drivers/video/fbdev/sis/sis_accel.h:273:75-76: Unneeded semicolon drivers/video/fbdev/sis/sis_accel.h:274:75-76: Unneeded semicolon drivers/video/fbdev/sis/sis_accel.h:275:73-74: Unneeded semicolon drivers/video/fbdev/sis/sis_accel.h:276:75-76: Unneeded semicolon Reported-by:
-
Jason Yan authored
This eliminates the following sparse warning: drivers/gpu/drm/panel/panel-sitronix-st7703.c:156:26: warning: symbol 'jh057n00900_panel_desc' was not declared. Should it be static? Reported-by:
Guido Günther <agx@sigxcpu.org> [Use static const] Signed-off-by:
-
Jason Yan authored
This eliminates the following sparse warning: drivers/gpu/drm/bridge/adv7511/adv7511_audio.c:58:5: warning: symbol 'adv7511_hdmi_hw_params' was not declared. Should it be static? Reported-by:
-
Jason Yan authored
This eliminates the following sparse warning: drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c:527:5: warning: symbol 'analogix_dp_start_aux_transaction' was not declared. Should it be static? Reported-by:
-
Liu Shixin authored
Simplify the return expression. Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Signed-off-by:
-
Liu Shixin authored
Simplify the return expression. Signed-off-by:
-
