- 25 May, 2023 2 commits
-
-
Chris Mi authored
The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad7 ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by:
Chris Mi <cmi@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Reviewed-by:
Vlad Buslov <vladbu@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Chris Mi authored
Move set_encap_dests() and clean_encap_dests() to the tunnel encap dedicated file. And rename them to mlx5e_tc_tun_encap_dests_set() and mlx5e_tc_tun_encap_dests_unset(). No functional change in this patch. It is needed in the next patch. Signed-off-by:
-
- 24 May, 2023 7 commits
-
-
Gavrilov Ilia authored
optlen is fetched without checking whether there is more than one byte to parse. It can lead to out-of-bounds access. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c61a4043 ("[IPV6]: Find option offset by type.") Signed-off-by:
Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-fixes-2023-05-22 This series provides bug fixes for the mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: -
Arınç ÜNAL authored
The commit c6d96df9 ("net: ethernet: mtk_eth_soc: drop generic vlan rx offload, only use DSA untagging") makes VLAN RX offloading to be only used on the SoCs without the MTK_NETSYS_V2 ability (which are not just MT7621 and MT7622). The commit disables the proper handling of special tagged (DSA) frames, added with commit 87e3df49 ("net-next: ethernet: mediatek: add CDM able to recognize the tag for DSA"), for non MTK_NETSYS_V2 SoCs when it finds a MAC that does not use DSA. So if the other MAC uses DSA, the CDMQ component transmits DSA tagged frames to the CPU improperly. This issue can be observed on frames with TCP, for example, a TCP speed test using iperf3 won't work. The commit disables the proper handling of special tagged (DSA) frames because it assumes that these SoCs don't use more than one MAC, which is wrong. Although I made Frank address this false assumption on the patch log when they sent the patch on behalf of Felix, the code still made changes with this assumption. Therefore, the proper handling of special tagged (DSA) frames must be kept enabled in all circumstances as it doesn't affect non DSA tagged frames. Hardware DSA untagging, introduced with the commit 2d7605a7 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging"), and VLAN RX offloading are operations on the two CDM components of the frame engine, CDMP and CDMQ, which connect to Packet DMA (PDMA) and QoS DMA (QDMA) and are between the MACs and the CPU. These operations apply to all MACs of the SoC so if one MAC uses DSA and the other doesn't, the hardware DSA untagging operation will cause the CDMP component to transmit non DSA tagged frames to the CPU improperly. Since the VLAN RX offloading feature configuration was dropped, VLAN RX offloading can only be used along with hardware DSA untagging. So, for the case above, we need to disable both features and leave it to the CPU, therefore software, to untag the DSA and VLAN tags. So the correct way to handle this is: For all SoCs: Enable the proper handling of special tagged (DSA) frames (MTK_CDMQ_IG_CTRL). For non MTK_NETSYS_V2 SoCs: Enable hardware DSA untagging (MTK_CDMP_IG_CTRL). Enable VLAN RX offloading (MTK_CDMP_EG_CTRL). When a non MTK_NETSYS_V2 SoC MAC does not use DSA: Disable hardware DSA untagging (MTK_CDMP_IG_CTRL). Disable VLAN RX offloading (MTK_CDMP_EG_CTRL). Fixes: c6d96df9 ("net: ethernet: mtk_eth_soc: drop generic vlan rx offload, only use DSA untagging") Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by:
-
Jakub Kicinski authored
We had a good run, but after 4 weeks of use we heard someone asking about pw-bot commands. Let's explain its existence in the docs. It's not a complete documentation but hopefully it's enough for the casual contributor. The project and scope are in flux so the details would likely become out of date, if we were to document more in depth. Link: https://lore.kernel.org/all/20230522140057.GB18381@nucnuc.mle/Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230522230903.1853151-1-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Pratyush Yadav authored
Commit 50749f2d ("tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.") added a call to skb_orphan_frags_rx() to fix leaks with zerocopy skbs. But it ended up adding a leak of its own. When skb_orphan_frags_rx() fails, the function just returns, leaking the skb it just cloned. Free it before returning. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Fixes: 50749f2d ("tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.") Signed-off-by:
Pratyush Yadav <ptyadav@amazon.de> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230522153020.32422-1-ptyadav@amazon.deSigned-off-by:
-
Sebastian Andrzej Siewior authored
The driver's interrupt service routine is requested with the IRQF_NO_THREAD if MSI is available. This means that the routine is invoked in hardirq context even on PREEMPT_RT. The routine itself is relatively short and schedules a worker, performs register access and schedules NAPI. On PREEMPT_RT, scheduling NAPI from hardirq results in waking ksoftirqd for further processing so using NAPI threads with this driver is highly recommended since it NULL routes the threaded-IRQ efforts. Adding rtl_hw_aspm_clkreq_enable() to the ISR is problematic on PREEMPT_RT because the function uses spinlock_t locks which become sleeping locks on PREEMPT_RT. The locks are only used to protect register access and don't nest into other functions or locks. They are also not used for unbounded period of time. Therefore it looks okay to convert them to raw_spinlock_t. Convert the three locks which are used from the interrupt service routine to raw_spinlock_t. Fixes: e1ed3e4d ("r8169: disable ASPM during NAPI poll") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20230522134121.uxjax0F5@linutronix.deSigned-off-by:
-
Yunsheng Lin authored
page_pool_ring_[un]lock() use in_softirq() to decide which spin lock variant to use, and when they are called in the context with in_softirq() being false, spin_lock_bh() is called in page_pool_ring_lock() while spin_unlock() is called in page_pool_ring_unlock(), because spin_lock_bh() has disabled the softirq in page_pool_ring_lock(), which causes inconsistency for spin lock pair calling. This patch fixes it by returning in_softirq state from page_pool_producer_lock(), and use it to decide which spin lock variant to use in page_pool_producer_unlock(). As pool->ring has both producer and consumer lock, so rename it to page_pool_producer_[un]lock() to reflect the actual usage. Also move them to page_pool.c as they are only used there, and remove the 'inline' as the compiler may have better idea to do inlining or not. Fixes: 78862447 ("net: page_pool: Add bulk support for ptr_ring") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/r/20230522031714.5089-1-linyunsheng@huawei.comSigned-off-by:
-
- 23 May, 2023 21 commits
-
-
Nicolas Dichtel authored
With a raw socket bound to IPPROTO_RAW (ie with hdrincl enabled), the protocol field of the flow structure, build by raw_sendmsg() / rawv6_sendmsg()), is set to IPPROTO_RAW. This breaks the ipsec policy lookup when some policies are defined with a protocol in the selector. For ipv6, the sin6_port field from 'struct sockaddr_in6' could be used to specify the protocol. Just accept all values for IPPROTO_RAW socket. For ipv4, the sin_port field of 'struct sockaddr_in' could not be used without breaking backward compatibility (the value of this field was never checked). Let's add a new kind of control message, so that the userland could specify which protocol is used. Fixes: 1da177e4 ("Linux-2.6.12-rc2") CC: stable@vger.kernel.org Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20230522120820.1319391-1-nicolas.dichtel@6wind.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Horatiu Vultur authored
It was noticing that after a while when unloading/loading the driver and sending traffic through the switch, it would stop working. It would stop forwarding any traffic and the only way to get out of this was to do a power cycle of the board. The root cause seems to be that the switch core is initialized twice. Apparently initializing twice the switch core disturbs the pointers in the queue systems in the HW, so after a while it would stop sending the traffic. Unfortunetly, it is not possible to use a reset of the switch here, because the reset line is connected to multiple devices like MDIO, SGPIO, FAN, etc. So then all the devices will get reseted when the network driver will be loaded. So the fix is to check if the core is initialized already and if that is the case don't initialize it again. Fixes: db8bcaad ("net: lan966x: add the basic lan966x driver") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
-
Shay Drory authored
After the cited patch, mlx5_irq xarray index can be different then mlx5_irq MSIX table index. Fix it by storing both mlx5_irq xarray index and MSIX table index. Fixes: 3354822c ("net/mlx5: Use dynamic msix vectors allocation") Signed-off-by:
Shay Drory <shayd@nvidia.com> Reviewed-by:
Eli Cohen <elic@nvidia.com> Signed-off-by:
-
Shay Drory authored
The cited patch deny the user of changing the affinity of mlx5 irqs, which break backward compatibility. Hence, allow the user to change the affinity of mlx5 irqs. Fixes: bbac70c7 ("net/mlx5: Use newer affinity descriptor") Signed-off-by:
-
Shay Drory authored
Whenever a shutdown is invoked, free irqs only and keep mlx5_irq synthetic wrapper intact in order to avoid use-after-free on system shutdown. for example: ================================================================== BUG: KASAN: use-after-free in _find_first_bit+0x66/0x80 Read of size 8 at addr ffff88823fc0d318 by task kworker/u192:0/13608 CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1 Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_report+0x170/0x473 ? _find_first_bit+0x66/0x80 kasan_report+0xad/0x130 ? _find_first_bit+0x66/0x80 _find_first_bit+0x66/0x80 mlx5e_open_channels+0x3c5/0x3a10 [mlx5_core] ? console_unlock+0x2fa/0x430 ? _raw_spin_lock_irqsave+0x8d/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x80 ? preempt_count_add+0x7d/0x150 ? __wake_up_klogd.part.0+0x7d/0xc0 ? vprintk_emit+0xfe/0x2c0 ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core] ? dev_attr_show.cold+0x35/0x35 ? devlink_health_do_dump.part.0+0x174/0x340 ? devlink_health_report+0x504/0x810 ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] ? process_one_work+0x680/0x1050 mlx5e_safe_switch_params+0x156/0x220 [mlx5_core] ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core] ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core] mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core] ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0 devlink_health_reporter_recover+0xa6/0x1f0 devlink_health_report+0x2f7/0x810 ? vsnprintf+0x854/0x15e0 mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core] ? newidle_balance+0x9b7/0xe30 ? psi_group_change+0x6a7/0xb80 ? mutex_lock+0x96/0xf0 ? __mutex_lock_slowpath+0x10/0x10 mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] process_one_work+0x680/0x1050 worker_thread+0x5a0/0xeb0 ? process_one_work+0x1050/0x1050 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Freed by task 1: kasan_save_stack+0x23/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x169/0x1d0 slab_free_freelist_hook+0xd2/0x190 __kmem_cache_free+0x1a1/0x2f0 irq_pool_free+0x138/0x200 [mlx5_core] mlx5_irq_table_destroy+0xf6/0x170 [mlx5_core] mlx5_core_eq_free_irqs+0x74/0xf0 [mlx5_core] shutdown+0x194/0x1aa [mlx5_core] pci_device_shutdown+0x75/0x120 device_shutdown+0x35c/0x620 kernel_restart+0x60/0xa0 __do_sys_reboot+0x1cb/0x2c0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x4b/0xb5 The buggy address belongs to the object at ffff88823fc0d300 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 24 bytes inside of 192-byte region [ffff88823fc0d300, ffff88823fc0d3c0) The buggy address belongs to the physical page: page:0000000010139587 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x23fc0c head:0000000010139587 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004ca00 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88823fc0d200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88823fc0d280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff88823fc0d300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88823fc0d380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88823fc0d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== general protection fault, probably for non-canonical address 0xdffffc005c40d7ac: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: probably user-memory-access in range [0x00000002e206bd60-0x00000002e206bd67] CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1 Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] RIP: 0010:__alloc_pages+0x141/0x5c0 Call Trace: <TASK> ? sysvec_apic_timer_interrupt+0xa0/0xc0 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __alloc_pages_slowpath.constprop.0+0x1ec0/0x1ec0 ? _raw_spin_unlock_irqrestore+0x3d/0x80 __kmalloc_large_node+0x80/0x120 ? kvmalloc_node+0x4e/0x170 __kmalloc_node+0xd4/0x150 kvmalloc_node+0x4e/0x170 mlx5e_open_channels+0x631/0x3a10 [mlx5_core] ? console_unlock+0x2fa/0x430 ? _raw_spin_lock_irqsave+0x8d/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x80 ? preempt_count_add+0x7d/0x150 ? __wake_up_klogd.part.0+0x7d/0xc0 ? vprintk_emit+0xfe/0x2c0 ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core] ? dev_attr_show.cold+0x35/0x35 ? devlink_health_do_dump.part.0+0x174/0x340 ? devlink_health_report+0x504/0x810 ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] ? process_one_work+0x680/0x1050 mlx5e_safe_switch_params+0x156/0x220 [mlx5_core] ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core] ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core] mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core] ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0 devlink_health_reporter_recover+0xa6/0x1f0 devlink_health_report+0x2f7/0x810 ? vsnprintf+0x854/0x15e0 mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core] ? newidle_balance+0x9b7/0xe30 ? psi_group_change+0x6a7/0xb80 ? mutex_lock+0x96/0xf0 ? __mutex_lock_slowpath+0x10/0x10 mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] process_one_work+0x680/0x1050 worker_thread+0x5a0/0xeb0 ? process_one_work+0x1050/0x1050 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:__alloc_pages+0x141/0x5c0 Code: e0 39 a3 96 89 e9 b8 22 01 32 01 83 e1 0f 48 89 fa 01 c9 48 c1 ea 03 d3 f8 83 e0 03 89 44 24 6c 48 b8 00 00 00 00 00 fc ff df <80> 3c 02 00 0f 85 fc 03 00 00 89 e8 4a 8b 14 f5 e0 39 a3 96 4c 89 RSP: 0018:ffff888251f0f438 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff1104a3e1e8b RCX: 0000000000000000 RDX: 000000005c40d7ac RSI: 0000000000000003 RDI: 00000002e206bd60 RBP: 0000000000052dc0 R08: ffff8882b0044218 R09: ffff8882b0045e8a R10: fffffbfff300fefc R11: ffff888167af4000 R12: 0000000000000003 R13: 0000000000000000 R14: 00000000696c7070 R15: ffff8882373f4380 FS: 0000000000000000(0000) GS:ffff88bf2be80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005641d031eee8 CR3: 0000002e7ca14000 CR4: 0000000000350ee0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x11000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]---] Reported-by:Frederick Lawler <fred@cloudflare.com> Link: https://lore.kernel.org/netdev/be5b9271-7507-19c5-ded1-fa78f1980e69@cloudflare.comSigned-off-by:
-
Shay Drory authored
From one hand, mlx5 driver is allowing to probe PFs in parallel. From the other hand, devcom, which is a share resource between PFs, is registered without any lock. This might resulted in memory problems. Hence, use the global mlx5_dev_list_lock in order to serialize devcom registration. Fixes: fadd59fc ("net/mlx5: Introduce inter-device communication mechanism") Signed-off-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
-
Shay Drory authored
In case devcom allocation is failed, mlx5 is always freeing the priv. However, this priv might have been allocated by a different thread, and freeing it might lead to use-after-free bugs. Fix it by freeing the priv only in case it was allocated by the running thread. Fixes: fadd59fc ("net/mlx5: Introduce inter-device communication mechanism") Signed-off-by:
-
Shay Drory authored
devcom events are sent to all registered component. Following the cited patch, it is possible for two components, e.g.: two eswitches, to send devcom events, while both components are registered. This means eswitch layer will do double un/pairing, which is double allocation and free of resources, even though only one un/pairing is needed. flow example: cpu0 cpu1 ---- ---- mlx5_devlink_eswitch_mode_set(dev0) esw_offloads_devcom_init() mlx5_devcom_register_component(esw0) mlx5_devlink_eswitch_mode_set(dev1) esw_offloads_devcom_init() mlx5_devcom_register_component(esw1) mlx5_devcom_send_event() mlx5_devcom_send_event() Hence, check whether the eswitches are already un/paired before free/allocation of resources. Fixes: 09b27846 ("net: devlink: enable parallel ops on netlink interface") Signed-off-by: -
Paul Blakey authored
Cited patch is using the eswitch object mapping pool while in nic mode where it isn't initialized. This results in the trace below [0]. Fix that by using either nic or eswitch object mapping pool depending if eswitch is enabled or not. [0]: [ 826.446057] ================================================================== [ 826.446729] BUG: KASAN: slab-use-after-free in mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.447515] Read of size 8 at addr ffff888194485830 by task tc/6233 [ 826.448243] CPU: 16 PID: 6233 Comm: tc Tainted: G W 6.3.0-rc6+ #1 [ 826.448890] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 826.449785] Call Trace: [ 826.450052] <TASK> [ 826.450302] dump_stack_lvl+0x33/0x50 [ 826.450650] print_report+0xc2/0x610 [ 826.450998] ? __virt_addr_valid+0xb1/0x130 [ 826.451385] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.451935] kasan_report+0xae/0xe0 [ 826.452276] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.452829] mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.453368] ? __kmalloc_node+0x5a/0x120 [ 826.453733] esw_add_restore_rule+0x20f/0x270 [mlx5_core] [ 826.454288] ? mlx5_eswitch_add_send_to_vport_meta_rule+0x260/0x260 [mlx5_core] [ 826.455011] ? mutex_unlock+0x80/0xd0 [ 826.455361] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.455862] ? mapping_add+0x2cb/0x440 [mlx5_core] [ 826.456425] mlx5e_tc_action_miss_mapping_get+0x139/0x180 [mlx5_core] [ 826.457058] ? mlx5e_tc_update_skb_nic+0xb0/0xb0 [mlx5_core] [ 826.457636] ? __kasan_kmalloc+0x77/0x90 [ 826.458000] ? __kmalloc+0x57/0x120 [ 826.458336] mlx5_tc_ct_flow_offload+0x325/0xe40 [mlx5_core] [ 826.458916] ? ct_kernel_enter.constprop.0+0x48/0xa0 [ 826.459360] ? mlx5_tc_ct_parse_action+0xf0/0xf0 [mlx5_core] [ 826.459933] ? mlx5e_mod_hdr_attach+0x491/0x520 [mlx5_core] [ 826.460507] ? mlx5e_mod_hdr_get+0x12/0x20 [mlx5_core] [ 826.461046] ? mlx5e_tc_attach_mod_hdr+0x154/0x170 [mlx5_core] [ 826.461635] mlx5e_configure_flower+0x969/0x2110 [mlx5_core] [ 826.462217] ? _raw_spin_lock_bh+0x85/0xe0 [ 826.462597] ? __mlx5e_add_fdb_flow+0x750/0x750 [mlx5_core] [ 826.463163] ? kasan_save_stack+0x2e/0x40 [ 826.463534] ? down_read+0x115/0x1b0 [ 826.463878] ? down_write_killable+0x110/0x110 [ 826.464288] ? tc_setup_action.part.0+0x9f/0x3b0 [ 826.464701] ? mlx5e_is_uplink_rep+0x4c/0x90 [mlx5_core] [ 826.465253] ? mlx5e_tc_reoffload_flows_work+0x130/0x130 [mlx5_core] [ 826.465878] tc_setup_cb_add+0x112/0x250 [ 826.466247] fl_hw_replace_filter+0x230/0x310 [cls_flower] [ 826.466724] ? fl_hw_destroy_filter+0x1a0/0x1a0 [cls_flower] [ 826.467212] fl_change+0x14e1/0x2030 [cls_flower] [ 826.467636] ? sock_def_readable+0x89/0x120 [ 826.468019] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.468509] ? kasan_unpoison+0x23/0x50 [ 826.468873] ? get_random_u16+0x180/0x180 [ 826.469244] ? __radix_tree_lookup+0x2b/0x130 [ 826.469640] ? fl_get+0x7b/0x140 [cls_flower] [ 826.470042] ? fl_mask_put+0x200/0x200 [cls_flower] [ 826.470478] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.470973] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.471427] tc_new_tfilter+0x644/0x1050 [ 826.471795] ? tc_get_tfilter+0x860/0x860 [ 826.472170] ? __thaw_task+0x130/0x130 [ 826.472525] ? arch_stack_walk+0x98/0xf0 [ 826.472892] ? cap_capable+0x9f/0xd0 [ 826.473235] ? security_capable+0x47/0x60 [ 826.473608] rtnetlink_rcv_msg+0x1d5/0x550 [ 826.473985] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.474383] ? __stack_depot_save+0x35/0x4c0 [ 826.474779] ? kasan_save_stack+0x2e/0x40 [ 826.475149] ? kasan_save_stack+0x1e/0x40 [ 826.475518] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.475939] ? task_work_add+0x77/0x1c0 [ 826.476305] netlink_rcv_skb+0xe0/0x210 [ 826.476661] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.477057] ? netlink_ack+0x7c0/0x7c0 [ 826.477412] ? rhashtable_jhash2+0xef/0x150 [ 826.477796] ? _copy_from_iter+0x105/0x770 [ 826.484386] netlink_unicast+0x346/0x490 [ 826.484755] ? netlink_attachskb+0x400/0x400 [ 826.485145] ? kernel_text_address+0xc2/0xd0 [ 826.485535] netlink_sendmsg+0x3b0/0x6c0 [ 826.485902] ? kernel_text_address+0xc2/0xd0 [ 826.486296] ? netlink_unicast+0x490/0x490 [ 826.486671] ? iovec_from_user.part.0+0x7a/0x1a0 [ 826.487083] ? netlink_unicast+0x490/0x490 [ 826.487461] sock_sendmsg+0x73/0xc0 [ 826.487803] ____sys_sendmsg+0x364/0x380 [ 826.488186] ? import_iovec+0x7/0x10 [ 826.488531] ? kernel_sendmsg+0x30/0x30 [ 826.488893] ? __copy_msghdr+0x180/0x180 [ 826.489258] ? kasan_save_stack+0x2e/0x40 [ 826.489629] ? kasan_save_stack+0x1e/0x40 [ 826.490002] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.490424] ? __call_rcu_common.constprop.0+0x46/0x580 [ 826.490876] ___sys_sendmsg+0xdf/0x140 [ 826.491231] ? copy_msghdr_from_user+0x110/0x110 [ 826.491649] ? fget_raw+0x120/0x120 [ 826.491988] ? ___sys_recvmsg+0xd9/0x130 [ 826.492355] ? folio_batch_add_and_move+0x80/0xa0 [ 826.492776] ? _raw_spin_lock+0x7a/0xd0 [ 826.493137] ? _raw_spin_lock+0x7a/0xd0 [ 826.493500] ? _raw_read_lock_irq+0x30/0x30 [ 826.493880] ? kasan_set_track+0x21/0x30 [ 826.494249] ? kasan_save_free_info+0x2a/0x40 [ 826.494650] ? do_sys_openat2+0xff/0x270 [ 826.495016] ? __fget_light+0x1b5/0x200 [ 826.495377] ? __virt_addr_valid+0xb1/0x130 [ 826.495763] __sys_sendmsg+0xb2/0x130 [ 826.496118] ? __sys_sendmsg_sock+0x20/0x20 [ 826.496501] ? __x64_sys_rseq+0x2e0/0x2e0 [ 826.496874] ? do_user_addr_fault+0x276/0x820 [ 826.497273] ? fpregs_assert_state_consistent+0x52/0x60 [ 826.497727] ? exit_to_user_mode_prepare+0x30/0x120 [ 826.498158] do_syscall_64+0x3d/0x90 [ 826.498502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.498949] RIP: 0033:0x7f9b67f4f887 [ 826.499294] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 826.500742] RSP: 002b:00007fff5d1a5498 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 826.501395] RAX: ffffffffffffffda RBX: 0000000064413ce6 RCX: 00007f9b67f4f887 [ 826.501975] RDX: 0000000000000000 RSI: 00007fff5d1a5500 RDI: 0000000000000003 [ 826.502556] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 826.503135] R10: 00007f9b67e08708 R11: 0000000000000246 R12: 0000000000000001 [ 826.503714] R13: 0000000000000001 R14: 00007fff5d1a9800 R15: 0000000000485400 [ 826.504304] </TASK> [ 826.504753] Allocated by task 3764: [ 826.505090] kasan_save_stack+0x1e/0x40 [ 826.505453] kasan_set_track+0x21/0x30 [ 826.505810] __kasan_kmalloc+0x77/0x90 [ 826.506164] __mlx5_create_flow_table+0x16d/0xbb0 [mlx5_core] [ 826.506742] esw_offloads_enable+0x60d/0xfb0 [mlx5_core] [ 826.507292] mlx5_eswitch_enable_locked+0x4d3/0x680 [mlx5_core] [ 826.507885] mlx5_devlink_eswitch_mode_set+0x2a3/0x580 [mlx5_core] [ 826.508513] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.508969] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.509427] genl_rcv_msg+0x28d/0x3e0 [ 826.509772] netlink_rcv_skb+0xe0/0x210 [ 826.510133] genl_rcv+0x24/0x40 [ 826.510448] netlink_unicast+0x346/0x490 [ 826.510810] netlink_sendmsg+0x3b0/0x6c0 [ 826.511179] sock_sendmsg+0x73/0xc0 [ 826.511519] __sys_sendto+0x18d/0x220 [ 826.511867] __x64_sys_sendto+0x72/0x80 [ 826.512232] do_syscall_64+0x3d/0x90 [ 826.512576] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.513220] Freed by task 5674: [ 826.513535] kasan_save_stack+0x1e/0x40 [ 826.513893] kasan_set_track+0x21/0x30 [ 826.514245] kasan_save_free_info+0x2a/0x40 [ 826.514629] ____kasan_slab_free+0x11a/0x1b0 [ 826.515021] __kmem_cache_free+0x14d/0x280 [ 826.515399] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.515907] mlx5_destroy_flow_table+0x119/0x630 [mlx5_core] [ 826.516481] esw_offloads_steering_cleanup+0xe7/0x150 [mlx5_core] [ 826.517084] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.517632] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.518225] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.518834] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.519286] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.519748] genl_rcv_msg+0x28d/0x3e0 [ 826.520101] netlink_rcv_skb+0xe0/0x210 [ 826.520458] genl_rcv+0x24/0x40 [ 826.520771] netlink_unicast+0x346/0x490 [ 826.521137] netlink_sendmsg+0x3b0/0x6c0 [ 826.521505] sock_sendmsg+0x73/0xc0 [ 826.521842] __sys_sendto+0x18d/0x220 [ 826.522191] __x64_sys_sendto+0x72/0x80 [ 826.522554] do_syscall_64+0x3d/0x90 [ 826.522894] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.523540] Last potentially related work creation: [ 826.523969] kasan_save_stack+0x1e/0x40 [ 826.524331] __kasan_record_aux_stack+0x9f/0xb0 [ 826.524739] insert_work+0x30/0x130 [ 826.525078] __queue_work+0x34b/0x690 [ 826.525426] queue_work_on+0x48/0x50 [ 826.525766] __rhashtable_remove_fast_one+0x4af/0x4d0 [mlx5_core] [ 826.526365] del_sw_flow_group+0x1b5/0x270 [mlx5_core] [ 826.526898] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.527407] esw_offloads_steering_cleanup+0xd3/0x150 [mlx5_core] [ 826.528009] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.528616] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.529218] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.529823] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.530276] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.530733] genl_rcv_msg+0x28d/0x3e0 [ 826.531079] netlink_rcv_skb+0xe0/0x210 [ 826.531439] genl_rcv+0x24/0x40 [ 826.531755] netlink_unicast+0x346/0x490 [ 826.532123] netlink_sendmsg+0x3b0/0x6c0 [ 826.532487] sock_sendmsg+0x73/0xc0 [ 826.532825] __sys_sendto+0x18d/0x220 [ 826.533175] __x64_sys_sendto+0x72/0x80 [ 826.533533] do_syscall_64+0x3d/0x90 [ 826.533877] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.534521] The buggy address belongs to the object at ffff888194485800 which belongs to the cache kmalloc-512 of size 512 [ 826.535506] The buggy address is located 48 bytes inside of freed 512-byte region [ffff888194485800, ffff888194485a00) [ 826.536666] The buggy address belongs to the physical page: [ 826.537138] page:00000000d75841dd refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x194480 [ 826.537915] head:00000000d75841dd order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 826.538595] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 826.539089] raw: 0200000000010200 ffff888100042c80 ffffea0004523800 dead000000000002 [ 826.539755] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 826.540417] page dumped because: kasan: bad access detected [ 826.541095] Memory state around the buggy address: [ 826.541519] ffff888194485700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542149] ffff888194485780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542773] >ffff888194485800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.543400] ^ [ 826.543822] ffff888194485880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.544452] ffff888194485900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.545079] ================================================================== Fixes: 67027828 ("net/mlx5e: TC, Set CT miss to the specific ct action instance") Signed-off-by:Paul Blakey <paulb@nvidia.com> Reviewed-by:
-
Rahul Rameshbabu authored
Check in the mlx5e_ptp_poll_ts_cq context if the ptp tx sq should be woken up. Before change, the ptp tx sq may never wake up if the ptp tx ts skb fifo is full when mlx5e_poll_tx_cq checks if the queue should be woken up. Fixes: 1880bc4e ("net/mlx5e: Add TX port timestamp support") Signed-off-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Vlad Buslov authored
Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.619471] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.620021] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.620564] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.621125] tc_setup_cb_add+0xd4/0x200 [ 164.621531] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.622047] fl_change+0xc95/0x18a0 [cls_flower] [ 164.622500] tc_new_tfilter+0x3fc/0xd20 [ 164.622906] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.623324] netlink_rcv_skb+0x54/0x100 [ 164.623727] netlink_unicast+0x190/0x250 [ 164.624138] netlink_sendmsg+0x245/0x4a0 [ 164.624544] sock_sendmsg+0x38/0x60 [ 164.624919] ____sys_sendmsg+0x1d0/0x1e0 [ 164.625340] ___sys_sendmsg+0x80/0xc0 [ 164.625731] __sys_sendmsg+0x51/0x90 [ 164.626117] do_syscall_64+0x3d/0x90 [ 164.626502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.626995] other info that might help us debug this: [ 164.627725] Possible unsafe locking scenario: [ 164.628268] CPU0 CPU1 [ 164.628683] ---- ---- [ 164.629098] lock(&comp->sem); [ 164.629421] lock(&esw->offloads.encap_tbl_lock); [ 164.630066] lock(&comp->sem); [ 164.630555] lock(&esw->offloads.encap_tbl_lock); [ 164.630993] *** DEADLOCK *** [ 164.631575] 3 locks held by handler1/3456: [ 164.631962] #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 164.632703] #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 164.633552] #2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.634435] stack backtrace: [ 164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1 [ 164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 164.636340] Call Trace: [ 164.636616] <TASK> [ 164.636863] dump_stack_lvl+0x47/0x70 [ 164.637217] check_noncircular+0xfe/0x110 [ 164.637601] __lock_acquire+0x159e/0x26e0 [ 164.637977] ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core] [ 164.638472] lock_acquire+0xc2/0x2a0 [ 164.638828] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.639339] ? lock_is_held_type+0x98/0x110 [ 164.639728] __mutex_lock+0x92/0xcd0 [ 164.640074] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.640576] ? __lock_acquire+0x382/0x26e0 [ 164.640958] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641468] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641965] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.642454] ? lock_release+0xbf/0x240 [ 164.642819] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.643318] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.643835] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.644340] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.644862] ? lock_acquire+0xc2/0x2a0 [ 164.645219] tc_setup_cb_add+0xd4/0x200 [ 164.645588] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.646067] fl_change+0xc95/0x18a0 [cls_flower] [ 164.646488] tc_new_tfilter+0x3fc/0xd20 [ 164.646861] ? tc_del_tfilter+0x810/0x810 [ 164.647236] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.647621] ? rtnl_setlink+0x160/0x160 [ 164.647982] netlink_rcv_skb+0x54/0x100 [ 164.648348] netlink_unicast+0x190/0x250 [ 164.648722] netlink_sendmsg+0x245/0x4a0 [ 164.649090] sock_sendmsg+0x38/0x60 [ 164.649434] ____sys_sendmsg+0x1d0/0x1e0 [ 164.649804] ? copy_msghdr_from_user+0x6d/0xa0 [ 164.650213] ___sys_sendmsg+0x80/0xc0 [ 164.650563] ? lock_acquire+0xc2/0x2a0 [ 164.650926] ? lock_acquire+0xc2/0x2a0 [ 164.651286] ? __fget_files+0x5/0x190 [ 164.651644] ? find_held_lock+0x2b/0x80 [ 164.652006] ? __fget_files+0xb9/0x190 [ 164.652365] ? lock_release+0xbf/0x240 [ 164.652723] ? __fget_files+0xd3/0x190 [ 164.653079] __sys_sendmsg+0x51/0x90 [ 164.653435] do_syscall_64+0x3d/0x90 [ 164.653784] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.654229] RIP: 0033:0x7f378054f8bd [ 164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48 [ 164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd [ 164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014 [ 164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c [ 164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0 [ 164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540 Fixes: f9d196bd ("net/mlx5e: Use correct eswitch for stack devices with lag") Signed-off-by: -
Roi Dayan authored
Fix spacing for the error and also the correct error code pointer. Fixes: c9b9dcb4 ("net/mlx5: Move device memory management to mlx5_core") Signed-off-by:
-
Vlad Buslov authored
With introduction of post action infrastructure most of the users of encap attribute had been modified in order to obtain the correct attribute by calling mlx5e_tc_get_encap_attr() helper instead of assuming encap action is always on default attribute. However, the cited commit didn't modify mlx5e_invalidate_encap() which prevents it from destroying correct modify header action which leads to a warning [0]. Fix the issue by using correct attribute. [0]: Feb 21 09:47:35 c-237-177-40-045 kernel: WARNING: CPU: 17 PID: 654 at drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:684 mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: RIP: 0010:mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: Call Trace: Feb 21 09:47:35 c-237-177-40-045 kernel: <TASK> Feb 21 09:47:35 c-237-177-40-045 kernel: mlx5e_tc_fib_event_work+0x8e3/0x1f60 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: ? mlx5e_take_all_encap_flows+0xe0/0xe0 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: ? lock_downgrade+0x6d0/0x6d0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: process_one_work+0x7c2/0x1310 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? pwq_dec_nr_in_flight+0x230/0x230 Feb 21 09:47:35 c-237-177-40-045 kernel: ? rwlock_bug.part.0+0x90/0x90 Feb 21 09:47:35 c-237-177-40-045 kernel: worker_thread+0x59d/0xec0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? __kthread_parkme+0xd9/0x1d0 Fixes: 8300f225 ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by:
-
Yevgeny Kliteynik authored
SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB (loopback), and FL (force-loopback) QP is preferred for performance. FL is available when RoCE is enabled or disabled based on RoCE caps. This patch adds reading of FL capability from HCA caps in addition to the existing reading from RoCE caps, thus fixing the case where we didn't have loopback enabled when RoCE was disabled. Fixes: 7304d603 ("net/mlx5: DR, Add support for force-loopback QP") Signed-off-by:
Itamar Gozlan <igozlan@nvidia.com> Signed-off-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by:
-
Erez Shitrit authored
When calculating crc for hash index we use the function crc32 that calculates for little-endian (LE) arch. Then we convert it to network endianness using htonl(), but it's wrong to do the conversion in BE archs since the crc32 value is already LE. The solution is to switch the bytes from the crc result for all types of arc. Fixes: 40416d8e ("net/mlx5: DR, Replace CRC32 implementation to use kernel lib") Signed-off-by:
Erez Shitrit <erezsh@nvidia.com> Reviewed-by:
Alex Vesker <valex@nvidia.com> Signed-off-by:
-
Shay Drory authored
In case user switch a device from switchdev mode to legacy mode, mlx5 first unpair the E-switch and afterwards unload the uplink vport. From the other hand, in case user remove or reload a device, mlx5 first unload the uplink vport and afterwards unpair the E-switch. The latter is causing a bug[1], hence, handle pairing of E-switch as part of uplink un/load APIs. [1] In case VF_LAG is used, every tc fdb flow is duplicated to the peer esw. However, the original esw keeps a pointer to this duplicated flow, not the peer esw. e.g.: if user create tc fdb flow over esw0, the flow is duplicated over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated flow. During module unload while a peer tc fdb flow is still offloaded, in case the first device to be removed is the peer device (esw1 in the example above), the peer net-dev is destroyed, and so the mlx5e_priv is memset to 0. Afterwards, the peer device is trying to unpair himself from the original device (esw0 in the example above). Unpair API invoke the original device to clear peer flow from its eswitch (esw0), but the peer flow, which is stored over the original eswitch (esw0), is trying to use the peer mlx5e_priv, which is memset to 0 and result in bellow kernel-oops. [ 157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60 [ 157.964662 ] #PF: supervisor read access in kernel mode [ 157.965123 ] #PF: error_code(0x0000) - not-present page [ 157.965582 ] PGD 0 P4D 0 [ 157.965866 ] Oops: 0000 [#1] SMP [ 157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core] [ 157.976164 ] Call Trace: [ 157.976437 ] <TASK> [ 157.976690 ] __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core] [ 157.977230 ] mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core] [ 157.977767 ] mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core] [ 157.984653 ] mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core] [ 157.985212 ] mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core] [ 157.985714 ] esw_offloads_disable+0x5a/0x110 [mlx5_core] [ 157.986209 ] mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core] [ 157.986757 ] mlx5_eswitch_disable+0x51/0x80 [mlx5_core] [ 157.987248 ] mlx5_unload+0x2a/0xb0 [mlx5_core] [ 157.987678 ] mlx5_uninit_one+0x5f/0xd0 [mlx5_core] [ 157.988127 ] remove_one+0x64/0xe0 [mlx5_core] [ 157.988549 ] pci_device_remove+0x31/0xa0 [ 157.988933 ] device_release_driver_internal+0x18f/0x1f0 [ 157.989402 ] driver_detach+0x3f/0x80 [ 157.989754 ] bus_remove_driver+0x70/0xf0 [ 157.990129 ] pci_unregister_driver+0x34/0x90 [ 157.990537 ] mlx5_cleanup+0xc/0x1c [mlx5_core] [ 157.990972 ] __x64_sys_delete_module+0x15a/0x250 [ 157.991398 ] ? exit_to_user_mode_prepare+0xea/0x110 [ 157.991840 ] do_syscall_64+0x3d/0x90 [ 157.992198 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 04de7dda ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Fixes: 1418ddd9 ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG") Signed-off-by:
-
Shay Drory authored
DEVX can issue a general command, which is not used by mlx5 driver. In case such command is failed, mlx5 is trying to collect the failure data, However, mlx5 doesn't create a storage for this command, since mlx5 doesn't use it. This lead to array-index-out-of-bounds error. Fix it by checking whether the command is known before collecting the failure data. Fixes: 34f46ae0 ("net/mlx5: Add command failures data to debugfs") Signed-off-by:
-
Chuck Lever authored
sock->file = sock_alloc_file(sock, O_NONBLOCK, NULL); ^^^^ ^^^^ sock_alloc_file() calls release_sock() on error but the left hand side of the assignment dereferences "sock". This isn't the bug and I didn't report this earlier because there is an assert that it doesn't fail. net/handshake/handshake-test.c:221 handshake_req_submit_test4() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:233 handshake_req_submit_test4() warn: 'req' was already freed. net/handshake/handshake-test.c:254 handshake_req_submit_test5() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:290 handshake_req_submit_test6() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:321 handshake_req_cancel_test1() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:355 handshake_req_cancel_test2() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:367 handshake_req_cancel_test2() warn: 'req' was already freed. net/handshake/handshake-test.c:395 handshake_req_cancel_test3() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:407 handshake_req_cancel_test3() warn: 'req' was already freed. net/handshake/handshake-test.c:451 handshake_req_destroy_test1() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:463 handshake_req_destroy_test1() warn: 'req' was already freed. Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Fixes: 88232ec1 ("net/handshake: Add Kunit tests for the handshake consumer API") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/168451609436.45209.15407022385441542980.stgit@oracle-102.nfsv4bat.orgSigned-off-by:
-
Chuck Lever authored
The "handshake_req_alloc excessive privsize" kunit test is intended to check what happens when the maximum privsize is exceeded. The WARN_ON_ONCE_GFP at mm/page_alloc.c:4744 can be disabled safely for this test. Reported-by:
Linux Kernel Functional Testing <lkft@linaro.org> Fixes: 88232ec1 ("net/handshake: Add Kunit tests for the handshake consumer API") Signed-off-by:
-
Christophe JAILLET authored
Should tc589_config() fail, some resources need to be released as already done in the remove function. Fixes: 15b99ac1 ("[PATCH] pcmcia: add return value to _config() functions") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
-
Christophe JAILLET authored
If an error occures after calling nv_mgmt_acquire_sema(), it should be undone with a corresponding nv_mgmt_release_sema() call. Add it in the error handling path of the probe as already done in the remove function. Fixes: cac1c52c ("forcedeth: mgmt unit interface") Signed-off-by:
Zhu Yanjun <zyjzyj2000@gmail.com> Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
- 22 May, 2023 1 commit
-
-
Xin Long authored
When doing plpmtu probe, the probe size is growing every time when it receives the ACK during the Search state until the probe fails. When the failure occurs, pl.probe_high is set and it goes to the Complete state. However, if the link pmtu is huge, like 65535 in loopback_dev, the probe eventually keeps using SCTP_MAX_PLPMTU as the probe size and never fails. Because of that, pl.probe_high can not be set, and the plpmtu probe can never go to the Complete state. Fix it by setting pl.probe_high to SCTP_MAX_PLPMTU when the probe size grows to SCTP_MAX_PLPMTU in sctp_transport_pl_recv(). Also, not allow the probe size greater than SCTP_MAX_PLPMTU in the Complete state. Fixes: b87641af ("sctp: do state transition when a probe succeeds on HB ACK recv path") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
- 20 May, 2023 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix compiler warnings on btnxpuart - Fix potential double free on hci_conn_unlink - Fix UAF on hci_conn_hash_flush * tag 'for-net-2023-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: btnxpuart: Fix compiler warnings Bluetooth: Unlink CISes when LE disconnects in hci_conn_del Bluetooth: Fix UAF in hci_conn_hash_flush again Bluetooth: Refcnt drop must be placed last in hci_conn_unlink Bluetooth: Fix potential double free caused by hci_conn_unlink ==================== Link: https://lore.kernel.org/r/20230519233056.2024340-1-luiz.dentz@gmail.comSigned-off-by:
-
Taehee Yoo authored
When the virtual interface's feature is updated, it synchronizes the updated feature for its own lower interface. This propagation logic should be worked as the iteration, not recursively. But it works recursively due to the netdev notification unexpectedly. This problem occurs when it disables LRO only for the team and bonding interface type. team0 | +------+------+-----+-----+ | | | | | team1 team2 team3 ... team200 If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE event to its own lower interfaces(team1 ~ team200). It is worked by netdev_sync_lower_features(). So, the NETDEV_FEAT_CHANGE notification logic of each lower interface work iteratively. But generated NETDEV_FEAT_CHANGE event is also sent to the upper interface too. upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own lower interfaces again. lower and upper interfaces receive this event and generate this event again and again. So, the stack overflow occurs. But it is not the infinite loop issue. Because the netdev_sync_lower_features() updates features before generating the NETDEV_FEAT_CHANGE event. Already synchronized lower interfaces skip notification logic. So, it is just the problem that iteration logic is changed to the recursive unexpectedly due to the notification mechanism. Reproducer: ip link add team0 type team ethtool -K team0 lro on for i in {1..200} do ip link add team$i master team0 type team ethtool -K team$i lro on done ethtool -K team0 lro off In order to fix it, the notifier_ctx member of bonding/team is introduced. Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack") Signed-off-by:Taehee Yoo <ap420073@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.comSigned-off-by:
-
- 19 May, 2023 7 commits
-
-
Neeraj Sanjay Kale authored
This fixes the follwing compiler warning reported by kernel test robot: drivers/bluetooth/btnxpuart.c:1332:34: warning: unused variable 'nxpuart_of_match_table' [-Wunused-const-variable] Signed-off-by:
Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305161345.eClvTYQ9-lkp@intel.com/Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Ruihan Li authored
Currently, hci_conn_del calls hci_conn_unlink for BR/EDR, (e)SCO, and CIS connections, i.e., everything except LE connections. However, if (e)SCO connections are unlinked when BR/EDR disconnects, CIS connections should also be unlinked when LE disconnects. In terms of disconnection behavior, CIS and (e)SCO connections are not too different. One peculiarity of CIS is that when CIS connections are disconnected, the CIS handle isn't deleted, as per [BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 4, Part E] 7.1.6 Disconnect command: All SCO, eSCO, and CIS connections on a physical link should be disconnected before the ACL connection on the same physical connection is disconnected. If it does not, they will be implicitly disconnected as part of the ACL disconnection. ... Note: As specified in Section 7.7.5, on the Central, the handle for a CIS remains valid even after disconnection and, therefore, the Host can recreate a disconnected CIS at a later point in time using the same connection handle. Since hci_conn_link invokes both hci_conn_get and hci_conn_hold, hci_conn_unlink should perform both hci_conn_put and hci_conn_drop as well. However, currently it performs only hci_conn_put. This patch makes hci_conn_unlink call hci_conn_drop as well, which simplifies the logic in hci_conn_del a bit and may benefit future users of hci_conn_unlink. But it is noted that this change additionally implies that hci_conn_unlink can queue disc_work on conn itself, with the following call stack: hci_conn_unlink(conn) [conn->parent == NULL] -> hci_conn_unlink(child) [child->parent == conn] -> hci_conn_drop(child->parent) -> queue_delayed_work(&conn->disc_work) Queued disc_work after hci_conn_del can be spurious, so during the process of hci_conn_del, it is necessary to make the call to cancel_delayed_work(&conn->disc_work) after invoking hci_conn_unlink. Signed-off-by:Ruihan Li <lrh2000@pku.edu.cn> Co-developed-by:
-
Ruihan Li authored
Commit 06149746 ("Bluetooth: hci_conn: Add support for linking multiple hcon") reintroduced a previously fixed bug [1] ("KASAN: slab-use-after-free Read in hci_conn_hash_flush"). This bug was originally fixed by commit 5dc7d23e ("Bluetooth: hci_conn: Fix possible UAF"). The hci_conn_unlink function was added to avoid invalidating the link traversal caused by successive hci_conn_del operations releasing extra connections. However, currently hci_conn_unlink itself also releases extra connections, resulted in the reintroduced bug. This patch follows a more robust solution for cleaning up all connections, by repeatedly removing the first connection until there are none left. This approach does not rely on the inner workings of hci_conn_del and ensures proper cleanup of all connections. Meanwhile, we need to make sure that hci_conn_del never fails. Indeed it doesn't, as it now always returns zero. To make this a bit clearer, this patch also changes its return type to void. Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-bluetooth/000000000000aa920505f60d25ad@google.com/ Fixes: 06149746 ("Bluetooth: hci_conn: Add support for linking multiple hcon") Signed-off-by:
-
Ruihan Li authored
If hci_conn_put(conn->parent) reduces conn->parent's reference count to zero, it can immediately deallocate conn->parent. At the same time, conn->link->list has its head in conn->parent, causing use-after-free problems in the latter list_del_rcu(&conn->link->list). This problem can be easily solved by reordering the two operations, i.e., first performing the list removal with list_del_rcu and then decreasing the refcnt with hci_conn_put. Reported-by:
Luiz Augusto von Dentz <luiz.dentz@gmail.com> Closes: https://lore.kernel.org/linux-bluetooth/CABBYNZ+1kce8_RJrLNOXd_8=Mdpb=2bx4Nto-hFORk=qiOkoCg@mail.gmail.com/ Fixes: 06149746 ("Bluetooth: hci_conn: Add support for linking multiple hcon") Signed-off-by:
-
Ruihan Li authored
The hci_conn_unlink function is being called by hci_conn_del, which means it should not call hci_conn_del with the input parameter conn again. If it does, conn may have already been released when hci_conn_unlink returns, leading to potential UAF and double-free issues. This patch resolves the problem by modifying hci_conn_unlink to release only conn's child links when necessary, but never release conn itself. Reported-by: syzbot+690b90b14f14f43f4688@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-bluetooth/000000000000484a8205faafe216@google.com/ Fixes: 06149746 ("Bluetooth: hci_conn: Add support for linking multiple hcon") Signed-off-by:
-
Shenwei Wang authored
Two dma_wmb() are added in the XDP TX path to ensure proper ordering of descriptor and buffer updates: 1. A dma_wmb() is added after updating the last BD to make sure the updates to rest of the descriptor are visible before transferring ownership to FEC. 2. A dma_wmb() is also added after updating the bdp to ensure these updates are visible before updating txq->bd.cur. 3. Start the xmit of the frame immediately right after configuring the tx descriptor. Fixes: 6d6b39f1 ("net: fec: add initial XDP support") Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by:
Wei Fang <wei.fang@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
I would like to be copied on new patches submitted on this driver. I am relatively familiar with the code, having practically maintained it for a while. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by:
-
