KOE TX26D202VM0BWA panel spec indicates the DE signal is active high in
timing chart, so add DISPLAY_FLAGS_DE_HIGH flag in display timing flags.
This aligns display_timing with panel_desc.

Fixes: 8a070524 ("drm/panel: simple: Add support for KOE TX26D202VM0BWA panel")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240624015612.341983-1-victor.liu@nxp.comSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624015612.341983-1-victor.liu@nxp.com

Only export struct fb_info.fix.smem_start if that is required by the
user and the memory does not come from vmalloc().

Setting struct fb_info.fix.smem_start breaks systems where DMA
memory is backed by vmalloc address space. An example error is
shown below.

[    3.536043] ------------[ cut here ]------------
[    3.540716] virt_to_phys used for non-linear address: 000000007fc4f540 (0xffff800086001000)
[    3.552628] WARNING: CPU: 4 PID: 61 at arch/arm64/mm/physaddr.c:12 __virt_to_phys+0x68/0x98
[    3.565455] Modules linked in:
[    3.568525] CPU: 4 PID: 61 Comm: kworker/u12:5 Not tainted 6.6.23-06226-g4986cc3e1b75-dirty #250
[    3.577310] Hardware name: NXP i.MX95 19X19 board (DT)
[    3.582452] Workqueue: events_unbound deferred_probe_work_func
[    3.588291] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.595233] pc : __virt_to_phys+0x68/0x98
[    3.599246] lr : __virt_to_phys+0x68/0x98
[    3.603276] sp : ffff800083603990
[    3.677939] Call trace:
[    3.680393]  __virt_to_phys+0x68/0x98
[    3.684067]  drm_fbdev_dma_helper_fb_probe+0x138/0x238
[    3.689214]  __drm_fb_helper_initial_config_and_unlock+0x2b0/0x4c0
[    3.695385]  drm_fb_helper_initial_config+0x4c/0x68
[    3.700264]  drm_fbdev_dma_client_hotplug+0x8c/0xe0
[    3.705161]  drm_client_register+0x60/0xb0
[    3.709269]  drm_fbdev_dma_setup+0x94/0x148

Additionally, DMA memory is assumed to by contiguous in physical
address space, which is not guaranteed by vmalloc().

Resolve this by checking the module flag drm_leak_fbdev_smem when
DRM allocated the instance of struct fb_info. Fbdev-dma then only
sets smem_start only if required (via FBINFO_HIDE_SMEM_START). Also
guarantee that the framebuffer is not located in vmalloc address
space.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Peng Fan (OSS) <peng.fan@oss.nxp.com>
Closes: https://lore.kernel.org/dri-devel/20240604080328.4024838-1-peng.fan@oss.nxp.com/Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/dri-devel/CAMuHMdX3N0szUvt1VTbroa2zrT1Nye_VzPb5qqCZ7z5gSm7HGw@mail.gmail.com/
Fixes: a51c7663 ("drm/fb-helper: Consolidate CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v6.4+
Link: https://patchwork.freedesktop.org/patch/msgid/20240617152843.11886-1-tzimmermann@suse.de

Roll -rc3 and current drm/fixes in.

This will also unstuck our for-next branch.
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Since the debugfs functions have no-op stubs for CONFIG_DEBUG_FS=n,
the compiler will optimize the rest away since they are no longer referenced.

The benefit of removing the conditional compilation is that the build
is actually tested for both CONFIG_DEBUG_FS configuration values.
Assuming most developers have it enabled, CONFIG_DEBUG_FS=n is not tested
much and may fail the build due to the conditional compilation.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606120842.1377267-1-pengfuyuan@kylinos.cnSigned-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Core Changes:
- Xe Maintainers update to MAINTAINERS file.

Driver Changes:
- Use correct forcewake assertions.
- Assert that VRAM provisioning is only done on DGFX.
- Flush render caches before user-fence signalling on all engines.
- Move the disable_c6 call since it was sometimes never called.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZmrXV0FoBb8M0c6J@fedora

Merge tag 'exynos-drm-fixes-for-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

Regression fix
- Fix an regression issue by adding 640x480 fallback mode
  for Exynos HDMI driver.

Bug fix
- Fix a memory leak by ensuring the duplicated EDID is properly freed in the get_modes function.

Code cleanup
- Remove redundant driver owner initialization since platform_driver_register() sets it automatically.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610073839.37430-1-inki.dae@samsung.com

disable c6 called in guc_pc_fini_hw is unreachable.

GuC PC init returns earlier if skip_guc_pc is true and never
registers the finish call thus making disable_c6 unreachable.

move this call to gt idle.

v2: rebase
v3: add fixes tag (Himal)

Fixes: 975e4a37 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606100842.956072-3-riana.tauro@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 6800e63c)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Tests show that user fence signalling requires kind of write barrier,
otherwise not all writes performed by the workload will be available
to userspace. It is already done for render and compute, we need it
also for the rest: video, gsc, copy.

Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605-fix_user_fence_posted-v3-2-06e7932f784a@intel.com
(cherry picked from commit 3ad7d18c)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

The Local Memory (aka VRAM) is only available on DGFX platforms.
We shouldn't attempt to provision VFs with LMEM or attempt to
update the LMTT on non-DGFX platforms. Add missing asserts that
would enforce that and fix release code that could crash on iGFX
due to uninitialized LMTT.

Fixes: 0698ff57 ("drm/xe/pf: Update the LMTT when freeing VF GT config")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607153155.1592-1-michal.wajdeczko@intel.com
(cherry picked from commit b321cb83)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

The rc6 registers used in disable_c6 function belong
to the GT forcewake domain. Hence change the forcewake
assertion to check GT forcewake domain.

v2: add fixes tag (Himal)

Fixes: 975e4a37 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606100842.956072-2-riana.tauro@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 21b70855)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.

This driver users the component model and shutdown happens in the base
driver. The "drvdata" for this driver will always be valid if
shutdown() is called and as of commit 2a073968
("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a
noop") we don't need to confirm that "drm" is non-NULL.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611102744.v2.1.I2b014f90afc4729b6ecc7b5ddd1f6dedcea4625b@changeid

Based on grepping through the source code, this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time.
This is important because drm_atomic_helper_shutdown() will cause
panels to get disabled cleanly which may be important for their power
sequencing.  Future changes will remove any custom powering off in
individual panel drivers so the DRM drivers need to start getting this
right.

The fact that we should call drm_atomic_helper_shutdown() in the case of
OS shutdown comes straight out of the kernel doc "driver instance
overview" in drm_drv.c.

[geert: shmob_drm_remove() already calls drm_atomic_helper_shutdown]
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230901164111.RFT.15.Iaf638a1d4c8b3c307a6192efabb4cbb06b195f15@changeid
[geert: s/drm_helper_force_disable_all/drm_atomic_helper_shutdown/]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/17c6a5a668e5975f871b77fb1fca6711a0799d9e.1718176895.git.geert+renesas@glider.be

'init_exec' is unused since
commit cb75d97e ("drm/nouveau: implement devinit subdev, and new
init table parser")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517232617.230767-1-linux@treblig.org

If the card doesn't have display hardware, hpd_work and hpd_lock are
left uninitialized which causes BUG when attempting to schedule hpd_work
on runtime PM resume.

Fix it by adding headless flag to DRM and skip any hpd if it's set.

Fixes: ae1aadb1 ("nouveau: don't fail driver load if no display hw present.")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/337Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607221032.25918-1-anarsoul@gmail.com

This happens when the amdgpu_bo_release_notify running
before amdgpu_ttm_set_buffer_funcs_status set the buffer
funcs to enabled.

check the buffer funcs enablement before calling the fill
buffer memory.

v2:(Christian)
  - Apply it only for GEM buffers and since GEM buffers are only
    allocated/freed while the driver is loaded we never run into
    the issue to clear with buffer funcs disabled.

v3:(Mario)
  - drop the stable tag as this will presumably go into a
    -fixes PR for 6.10

Log snip:
*ERROR* Trying to clear memory with ring turned off.
RIP: 0010:amdgpu_bo_release_notify+0x201/0x220 [amdgpu]

Fixes: a68c7eaa ("drm/amdgpu: Enable clear page functionality")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Richard Gong <richard.gong@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610180401.9540-1-Arunpravin.PaneerSelvam@amd.com

Device managed panel bridge wrappers are created by calling to
drm_panel_bridge_add_typed() and registering a release handler for
clean-up when the device gets unbound.

Since the memory for this bridge is also managed and linked to the panel
device, the release function should not try to free that memory.
Moreover, the call to devm_kfree() inside drm_panel_bridge_remove() will
fail in this case and emit a warning because the panel bridge resource
is no longer on the device resources list (it has been removed from
there before the call to release handlers).

Fixes: 67022227 ("drm/bridge: Add a devm_ allocator for panel bridge.")
Signed-off-by: Adam Miotk <adam.miotk@arm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610102739.139852-1-adam.miotk@arm.com

komeda_pipeline_get_state() may return an error-valued pointer, thus
check the pointer for negative or null value before dereferencing.

Fixes: 502932a0 ("drm/komeda: Add the initial scaler support for CORE")
Signed-off-by: Amjad Ouled-Ameur <amjad.ouled-ameur@arm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610102056.40406-1-amjad.ouled-ameur@arm.com

Similar to the other Aya Neo devices this one features
again a portrait screen, here with a native resolution
of 1600x2560.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240310220401.895591-1-tjakobi@math.uni-bielefeld.de

The duplicated EDID is never freed. Fix it.

Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Core in platform_driver_register() already sets the .owner, so driver
does not need to.  Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

When reading EDID fails and driver reports no modes available, the DRM
core adds an artificial 1024x786 mode to the connector. Unfortunately
some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not
able to drive such mode, so report a safe 640x480 mode instead of nothing
in case of the EDID reading failure.

This fixes the following issue observed on Trats2 board since commit
13d5b040 ("drm/exynos: do not return negative values from .get_modes()"):

[drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops)
exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops)
exynos-dsi 11c80000.dsi: [drm:samsung_dsim_host_attach] Attached s6e8aa0 device (lanes:4 bpp:24 mode-flags:0x10b)
exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops)
exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops)
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
exynos-hdmi 12d00000.hdmi: [drm:hdmiphy_enable.part.0] *ERROR* PLL could not reach steady state
panel-samsung-s6e8aa0 11c80000.dsi.0: ID: 0xa2, 0x20, 0x8c
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
------------[ cut here ]------------
WARNING: CPU: 1 PID: 11 at drivers/gpu/drm/drm_atomic_helper.c:1682 drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
[CRTC:70:crtc-1] vblank wait timed out
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u16:0 Not tainted 6.9.0-rc5-next-20240424 #14913
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x68/0x88
 dump_stack_lvl from __warn+0x7c/0x1c4
 __warn from warn_slowpath_fmt+0x11c/0x1a8
 warn_slowpath_fmt from drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
 drm_atomic_helper_wait_for_vblanks.part.0 from drm_atomic_helper_commit_tail_rpm+0x7c/0x8c
 drm_atomic_helper_commit_tail_rpm from commit_tail+0x9c/0x184
 commit_tail from drm_atomic_helper_commit+0x168/0x190
 drm_atomic_helper_commit from drm_atomic_commit+0xb4/0xe0
 drm_atomic_commit from drm_client_modeset_commit_atomic+0x23c/0x27c
 drm_client_modeset_commit_atomic from drm_client_modeset_commit_locked+0x60/0x1cc
 drm_client_modeset_commit_locked from drm_client_modeset_commit+0x24/0x40
 drm_client_modeset_commit from __drm_fb_helper_restore_fbdev_mode_unlocked+0x9c/0xc4
 __drm_fb_helper_restore_fbdev_mode_unlocked from drm_fb_helper_set_par+0x2c/0x3c
 drm_fb_helper_set_par from fbcon_init+0x3d8/0x550
 fbcon_init from visual_init+0xc0/0x108
 visual_init from do_bind_con_driver+0x1b8/0x3a4
 do_bind_con_driver from do_take_over_console+0x140/0x1ec
 do_take_over_console from do_fbcon_takeover+0x70/0xd0
 do_fbcon_takeover from fbcon_fb_registered+0x19c/0x1ac
 fbcon_fb_registered from register_framebuffer+0x190/0x21c
 register_framebuffer from __drm_fb_helper_initial_config_and_unlock+0x350/0x574
 __drm_fb_helper_initial_config_and_unlock from exynos_drm_fbdev_client_hotplug+0x6c/0xb0
 exynos_drm_fbdev_client_hotplug from drm_client_register+0x58/0x94
 drm_client_register from exynos_drm_bind+0x160/0x190
 exynos_drm_bind from try_to_bring_up_aggregate_device+0x200/0x2d8
 try_to_bring_up_aggregate_device from __component_add+0xb0/0x170
 __component_add from mixer_probe+0x74/0xcc
 mixer_probe from platform_probe+0x5c/0xb8
 platform_probe from really_probe+0xe0/0x3d8
 really_probe from __driver_probe_device+0x9c/0x1e4
 __driver_probe_device from driver_probe_device+0x30/0xc0
 driver_probe_device from __device_attach_driver+0xa8/0x120
 __device_attach_driver from bus_for_each_drv+0x80/0xcc
 bus_for_each_drv from __device_attach+0xac/0x1fc
 __device_attach from bus_probe_device+0x8c/0x90
 bus_probe_device from deferred_probe_work_func+0x98/0xe0
 deferred_probe_work_func from process_one_work+0x240/0x6d0
 process_one_work from worker_thread+0x1a0/0x3f4
 worker_thread from kthread+0x104/0x138
 kthread from ret_from_fork+0x14/0x28
Exception stack(0xf0895fb0 to 0xf0895ff8)
...
irq event stamp: 82357
hardirqs last  enabled at (82363): [<c01a96e8>] vprintk_emit+0x308/0x33c
hardirqs last disabled at (82368): [<c01a969c>] vprintk_emit+0x2bc/0x33c
softirqs last  enabled at (81614): [<c0101644>] __do_softirq+0x320/0x500
softirqs last disabled at (81609): [<c012dfe0>] __irq_exit_rcu+0x130/0x184
---[ end trace 0000000000000000 ]---
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [CRTC:70:crtc-1] commit wait timed out
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [CONNECTOR:74:HDMI-A-1] commit wait timed out
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [PLANE:56:plane-5] commit wait timed out
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC

Cc: stable@vger.kernel.org
Fixes: 13d5b040 ("drm/exynos: do not return negative values from .get_modes()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Merge tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Update copies of kernel headers, which resulted in support for the
   new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC
   prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector,
   'map_shadow_stack' syscall for x86-32.

 - Revert perf.data record memory allocation optimization that ended up
   causing a regression, work is being done to re-introduce it in the
   next merge window.

 - Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
   interrupting the build.

* tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
  Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
  tools headers arm64: Sync arm64's cputype.h with the kernel sources
  tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL
  tools headers UAPI: Update i915_drm.h with the kernel sources
  tools headers UAPI: Sync kvm headers with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall
  perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION
  perf beauty: Update copy of linux/socket.h with the kernel sources
  tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync linux/stat.h with the kernel sources

Pull EDAC fixes from Borislav Petkov:

 - Convert PCI core error codes to proper error numbers since latter get
   propagated all the way up to the module loading functions

* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/igen6: Convert PCIBIOS_* return codes to errnos
  EDAC/amd64: Convert PCIBIOS_* return codes to errnos

Pull clk fix from Stephen Boyd:
 "One fix for the SiFive PRCI clocks so that the device boots again.

  This driver was registering clkdev lookups that were always going to
  be useless. This wasn't a problem until clkdev started returning an
  error in these cases, causing this driver to fail probe, and thus boot
  to fail because clks are essential for most drivers. The fix is
  simple, don't use clkdev because this is a DT based system where
  clkdev isn't used"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sifive: Do not register clkdevs for PRCI clocks

Pull smb client fixes from Steve French:
 "Two small smb3 client fixes:

   - fix deadlock in umount

   - minor cleanup due to netfs change"

* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Don't advance the I/O iterator before terminating subrequest
  smb: client: fix deadlock in smb2_find_smb_tcon()

Pull HID fixes from Benjamin Tissoires:

 - fix potential read out of bounds in hid-asus (Andrew Ballance)

 - fix endian-conversion on little endian systems in intel-ish-hid (Arnd
   Bergmann)

 - A couple of new input event codes (Aseda Aboagye)

 - errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
   (Christophe JAILLET), hid-logitech-dj (José Expósito)

 - current leakage fix while the device is in suspend on a i2c-hid
   laptop (Johan Hovold)

 - other assorted smaller fixes and device ID / quirk entry additions

* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for ELAN touchscreens 2F2C and 4116
  HID: i2c-hid: elan: fix reset suspend current leakage
  dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
  dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
  dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
  input: Add support for "Do Not Disturb"
  input: Add event code for accessibility key
  hid: asus: asus_report_fixup: fix potential read out of bounds
  HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
  HID: intel-ish-hid: fix endian-conversion
  HID: nintendo: Fix an error handling path in nintendo_hid_probe()
  HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
  HID: core: remove unnecessary WARN_ON() in implement()
  HID: nvidia-shield: Add missing check for input_ff_create_memless
  HID: intel-ish-hid: Fix build error for COMPILE_TEST

Merge tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the initial state of the save button in 'make gconfig'

 - Improve the Kconfig documentation

 - Fix a Kconfig bug regarding property visibility

 - Fix build breakage for systems where 'sed' is not installed in /bin

 - Fix a false warning about missing MODULE_DESCRIPTION()

* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
  kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
  kconfig: remove wrong expr_trans_bool()
  kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
  kconfig: doc: fix a typo in the note about 'imply'
  kconfig: gconf: give a proper initial state to the Save button
  kconfig: remove unneeded code for user-supplied values being out of range

Pull media fixes from Mauro Carvalho Chehab:

 - fixes for the new ipu6 driver (and related fixes to mei csi driver)

 - fix a double debugfs remove logic at mgb4 driver

 - a documentation fix

* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: intel/ipu6: add csi2 port sanity check in notifier bound
  media: intel/ipu6: update the maximum supported csi2 port number to 6
  media: mei: csi: Warn less verbosely of a missing device fwnode
  media: mei: csi: Put the IPU device reference
  media: intel/ipu6: fix the buffer flags caused by wrong parentheses
  media: intel/ipu6: Fix an error handling path in isys_probe()
  media: intel/ipu6: Move isys_remove() close to isys_probe()
  media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
  media: Documentation: v4l: Fix ACTIVE route flag
  media: mgb4: Fix double debugfs remove

Pull irq fixes from Ingo Molnar:

 - Fix possible memory leak the riscv-intc irqchip driver load failures

 - Fix boot crash in the sifive-plic irqchip driver caused by recently
   changed boot initialization order

 - Fix race condition in the gic-v3-its irqchip driver

* tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
  irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
  irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails

Pull x86 fixes from Ingo Molnar:
 "Miscellaneous fixes:

   - Fix kexec() crash if call depth tracking is enabled

   - Fix SMN reads on inaccessible registers on certain AMD systems"

* tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/amd_nb: Check for invalid SMN reads
  x86/kexec: Fix bug with call depth tracking

Pull perf event fix from Ingo Molnar:
 "Fix race between perf_event_free_task() and perf_event_release_kernel()
  that can result in missed wakeups and hung tasks"

* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix missing wakeup when waiting for context reference

Pull locking doc fix from Ingo Molnar:
 "Fix typos in the kerneldoc of some of the atomic APIs"

* tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: scripts: fix ${atomic}_sub_and_test() kerneldoc

Merge tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "14 hotfixes, 6 of which are cc:stable.

  All except the nilfs2 fix affect MM and all are singletons - see the
  chagelogs for details"

* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
  mm: fix xyz_noprof functions calling profiled functions
  codetag: avoid race at alloc_slab_obj_exts
  mm/hugetlb: do not call vma_add_reservation upon ENOMEM
  mm/ksm: fix ksm_zero_pages accounting
  mm/ksm: fix ksm_pages_scanned accounting
  kmsan: do not wipe out origin when doing partial unpoisoning
  vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
  mm: page_alloc: fix highatomic typing in multi-block buddies
  nilfs2: fix potential kernel bug due to lack of writeback flag waiting
  memcg: remove the lockdep assert from __mod_objcg_mlstate()
  mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
  mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
  mm: drop the 'anon_' prefix for swap-out mTHP counters

Pull gpio fixes from Bartosz Golaszewski:

 - interrupt handling and Kconfig fixes for gpio-tqmx86

 - add a buffer for storing output values in gpio-tqmx86 as reading back
   the registers always returns the input values

 - add missing MODULE_DESCRIPTION()s to several GPIO drivers

* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: add missing MODULE_DESCRIPTION() macros
  gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
  gpio: tqmx86: store IRQ trigger type and unmask status separately
  gpio: tqmx86: introduce shadow register for GPIO output value
  gpio: tqmx86: fix typo in Kconfig label

Pull block fixes from Jens Axboe:

 - Fix for null_blk block size validation (Andreas)

 - NVMe pull request via Keith:
      - Use reserved tags for special fabrics operations (Chunguang)
      - Persistent Reservation status masking fix (Weiwen)

* tag 'block-6.10-20240607' of git://git.kernel.dk/linux:
  null_blk: fix validation of block size
  nvme: fix nvme_pr_* status code parsing
  nvme-fabrics: use reserved tag for reg read/write command

Pull io_uring fixes from Jens Axboe:

 - Fix a locking order issue with setting max async thread workers
   (Hagar)

 - Fix for a NULL pointer dereference for failed async flagged requests
   using ring provided buffers. This doesn't affect the current kernel,
   but it does affect older kernels, and is being queued up for 6.10
   just to make the stable process easier (me)

 - Fix for NAPI timeout calculations for how long to busy poll, and
   subsequently how much to sleep post that if a wait timeout is passed
   in (me)

 - Fix for a regression in this release cycle, where we could end up
   using a partially unitialized match value for io-wq (Su)

* tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux:
  io_uring: fix possible deadlock in io_register_iowq_max_workers()
  io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()
  io_uring/napi: fix timeout calculation
  io_uring: check for non-NULL file pointer in io_file_can_poll()

Pull btrfs fixes from David Sterba:

 - fix handling of folio private changes.

   The private value holds pointer to our extent buffer structure
   representing a metadata range. Release and create of the range was
   not properly synchronized when updating the private bit which ended
   up in double folio_put, leading to all sorts of breakage

 - fix a crash, reported as duplicate key in metadata, but caused by a
   race of fsync and size extending write. Requires prealloc target
   range + fsync and other conditions (log tree state, timing)

 - fix leak of qgroup extent records after transaction abort

* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: protect folio::private when attaching extent buffer folios
  btrfs: fix leak of qgroup extent records after transaction abort
  btrfs: fix crash on racing fsync and size-extending write into prealloc

Pull nfsd fix from Chuck Lever:

 - Fix an occasional memory overwrite caused by a fix added in 6.10

* tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Fix loop termination condition in gss_free_in_token_pages()

Pull RISC-V fixes from Palmer Dabbelt:

 - Another fix to avoid allocating pages that overlap with ERR_PTR,
   which manifests on rv32

 - A revert for the badaccess patch I incorrectly picked up an early
   version of

* tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Revert "riscv: mm: accelerate pagefault when badaccess"
  riscv: fix overlap of allocated page and PTR_ERR