- 01 May, 2024 4 commits
-
-
Vitaly Lifshits authored
This is a partial revert of commit 6dbdd4de ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems"). The referenced commit used usleep_range inside the PHY access routines, which are sometimes called from an atomic context. This can lead to a kernel panic in some scenarios, such as cable disconnection and reconnection on vPro systems. Solve this by changing the usleep_range calls back to udelay. Fixes: 6dbdd4de ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems") Cc: stable@vger.kernel.org Reported-by:
Jérôme Carretero <cJ@zougloub.eu> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218740 Closes: https://lore.kernel.org/lkml/a7eb665c74b5efb5140e6979759ed243072cb24a.camel@zougloub.eu/Co-developed-by:
Sasha Neftin <sasha.neftin@intel.com> Signed-off-by:
Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by:
Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240429171040.1152516-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Marek Behún authored
The Topaz family (88E6141 and 88E6341) only support 256 Forwarding Information Tables. Fixes: a75961d0 ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341") Fixes: 1558727a ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141") Signed-off-by:
Marek Behún <kabel@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240429133832.9547-1-kabel@kernel.orgSigned-off-by:
-
Sebastian Andrzej Siewior authored
The selftest for the driver sends a dummy packet and checks if the packet will be received properly as it should be. The regular TX path and the selftest can use the same network queue so locking is required and was missing in the selftest path. This was addressed in the commit cited below. Unfortunately locking the TX queue requires BH to be disabled which is not the case in selftest path which is invoked in process context. Lockdep should be complaining about this. Use __netif_tx_lock_bh() for TX queue locking. Fixes: c650e048 ("cxgb4: Fix race between loopback and normal Tx path") Reported-by:
"John B. Wyatt IV" <jwyatt@redhat.com> Closes: https://lore.kernel.org/all/Zic0ot5aGgR-V4Ks@thinkpad2021/Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20240429091147.YWAaal4v@linutronix.deSigned-off-by:
-
Yunsheng Lin authored
rxrpc_alloc_data_txbuf() may be called with data_align being zero in none_alloc_txbuf() and rxkad_alloc_txbuf(), data_align is supposed to be an order-based alignment value, but zero is not a valid order-based alignment value, and '~(data_align - 1)' doesn't result in a valid mask-based alignment value for __page_frag_alloc_align(). Fix it by passing a valid order-based alignment value in none_alloc_txbuf() and rxkad_alloc_txbuf(). Also use page_frag_alloc_align() expecting an order-based alignment value in rxrpc_alloc_data_txbuf() to avoid doing the alignment converting operation and to catch possible invalid alignment value in the future. Remove the 'if (data_align)' checking too, as it is always true for a valid order-based alignment value. Fixes: 6b253646 ("rxrpc: Fix use of changed alignment param to page_frag_alloc_align()") Fixes: 49489bb0 ("rxrpc: Do zerocopy using MSG_SPLICE_PAGES and page frags") CC: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Acked-by:
David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20240428111640.27306-1-linyunsheng@huawei.comSigned-off-by:
-
- 29 Apr, 2024 13 commits
-
-
David S. Miller authored
Guillaume Nault says: ==================== vxlan: Fix vxlan counters. Like most virtual devices, vxlan needs special care when updating its netdevice counters. This is done in patch 1. Patch 2 just adds a missing VNI counter update (found while working on patch 1). ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
VXLAN stores per-VNI statistics using vxlan_vnifilter_count(). These statistics were not updated when arp_reduce() failed its pskb_may_pull() call. Use vxlan_vnifilter_count() to update the VNI counter when that happens. Fixes: 4095e0e1 ("drivers: vxlan: vnifilter: per vni stats") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Guillaume Nault authored
VXLAN devices update their stats locklessly. Therefore these counters should either be stored in per-cpu data structures or the updates should be done using atomic increments. Since the net_device_core_stats infrastructure is already used in vxlan_rcv(), use it for the other rx_dropped and tx_dropped counter updates. Update the other counters atomically using DEV_STATS_INC(). Fixes: d342894c ("vxlan: virtual extensible lan") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David S. Miller authored
Asbjørn Sloth Tønnesen says: ==================== net: qede: avoid overruling error codes This series fixes the qede driver, so that qede_parse_flow_attr() and it's subfunctions doesn't get their error codes overruled (ie. turning -EOPNOTSUPP into -EINVAL). --- I have two more patches along the same lines, but they are not yet causing any issues, so I have them destined for net-next. (those are for qede_flow_spec_validate_unused() and qede_flow_parse_ports().) After that I have a series for converting to extack + the final one for validating control flags. ==================== Signed-off-by: -
Asbjørn Sloth Tønnesen authored
When calling qede_parse_actions() then the return code was only used for a non-zero check, and then -EINVAL was returned. qede_parse_actions() can currently fail with: * -EINVAL * -EOPNOTSUPP This patch changes the code to use the actual return code, not just return -EINVAL. The blaimed commit broke the implicit assumption that only -EINVAL would ever be returned. Only compile tested. Fixes: 319a1d19 ("flow_offload: check for basic action hw stats type") Signed-off-by:
Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by:
-
Asbjørn Sloth Tønnesen authored
In qede_flow_spec_to_rule(), when calling qede_parse_flow_attr() then the return code was only used for a non-zero check, and then -EINVAL was returned. qede_parse_flow_attr() can currently fail with: * -EINVAL * -EOPNOTSUPP * -EPROTONOSUPPORT This patch changes the code to use the actual return code, not just return -EINVAL. The blaimed commit introduced qede_flow_spec_to_rule(), and this call to qede_parse_flow_attr(), it looks like it just duplicated how it was already used. Only compile tested. Fixes: 37c5d3ef ("qede: use ethtool_rx_flow_rule() to remove duplicated parser code") Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
In qede_add_tc_flower_fltr(), when calling qede_parse_flow_attr() then the return code was only used for a non-zero check, and then -EINVAL was returned. qede_parse_flow_attr() can currently fail with: * -EINVAL * -EOPNOTSUPP * -EPROTONOSUPPORT This patch changes the code to use the actual return code, not just return -EINVAL. The blaimed commit introduced these functions. Only compile tested. Fixes: 2ce9c93e ("qede: Ingress tc flower offload (drop action) support.") Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Explicitly set 'rc' (return code), before jumping to the unlock and return path. By not having any code depend on that 'rc' remains at it's initial value of -EINVAL, then we can re-use 'rc' for the return code of function calls in subsequent patches. Only compile tested. Signed-off-by:
-
Jakub Kicinski authored
Donald has been contributing to YNL a lot. Let's create a dedicated MAINTAINERS entry and add make his involvement official :) Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Signed-off-by:
-
David S. Miller authored
Doug Berger says: ==================== net: bcmgenet: protect contended accesses Some registers may be modified by parallel execution contexts and require protections to prevent corruption. A review of the driver revealed the need for these additional protections. ==================== Signed-off-by: -
Doug Berger authored
The UMAC_CMD register is written from different execution contexts and has insufficient synchronization protections to prevent possible corruption. Of particular concern are the acceses from the phy_device delayed work context used by the adjust_link call and the BH context that may be used by the ndo_set_rx_mode call. A spinlock is added to the driver to protect contended register accesses (i.e. reg_lock) and it is used to synchronize accesses to UMAC_CMD. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Cc: stable@vger.kernel.org Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
-
Doug Berger authored
The ndo_set_rx_mode function is synchronized with the netif_addr_lock spinlock and BHs disabled. Since this function is also invoked directly from the driver the same synchronization should be applied. Fixes: 72f96347 ("net: bcmgenet: set Rx mode before starting netif") Cc: stable@vger.kernel.org Signed-off-by:
-
Doug Berger authored
The EXT_RGMII_OOB_CTRL register can be written from different contexts. It is predominantly written from the adjust_link handler which is synchronized by the phydev->lock, but can also be written from a different context when configuring the mii in bcmgenet_mii_config(). The chances of contention are quite low, but it is conceivable that adjust_link could occur during resume when WoL is enabled so use the phydev->lock synchronizer in bcmgenet_mii_config() to be sure. Fixes: afe3f907 ("net: bcmgenet: power on MII block for all MII modes") Cc: stable@vger.kernel.org Signed-off-by:
-
- 27 Apr, 2024 1 commit
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2024-04-26 We've added 12 non-merge commits during the last 22 day(s) which contain a total of 14 files changed, 168 insertions(+), 72 deletions(-). The main changes are: 1) Fix BPF_PROBE_MEM in verifier and JIT to skip loads from vsyscall page, from Puranjay Mohan. 2) Fix a crash in XDP with devmap broadcast redirect when the latter map is in process of being torn down, from Toke Høiland-Jørgensen. 3) Fix arm64 and riscv64 BPF JITs to properly clear start time for BPF program runtime stats, from Xu Kuohai. 4) Fix a sockmap KCSAN-reported data race in sk_psock_skb_ingress_enqueue, from Jason Xing. 5) Fix BPF verifier error message in resolve_pseudo_ldimm64, from Anton Protopopov. 6) Fix missing DEBUG_INFO_BTF_MODULES Kconfig menu item, from Andrii Nakryiko. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Test PROBE_MEM of VSYSCALL_ADDR on x86-64 bpf, x86: Fix PROBE_MEM runtime load check bpf: verifier: prevent userspace memory access xdp: use flags field to disambiguate broadcast redirect arm32, bpf: Reimplement sign-extension mov instruction riscv, bpf: Fix incorrect runtime stats bpf, arm64: Fix incorrect runtime stats bpf: Fix a verifier verbose message bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue MAINTAINERS: bpf: Add Lehui and Puranjay as riscv64 reviewers MAINTAINERS: Update email address for Puranjay Mohan bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition ==================== Link: https://lore.kernel.org/r/20240426224248.26197-1-daniel@iogearbox.netSigned-off-by:
-
- 26 Apr, 2024 11 commits
-
-
David Howells authored
Fix extract_user_to_sg() so that it will break out of the loop if iov_iter_extract_pages() returns 0 rather than looping around forever. [Note that I've included two fixes lines as the function got moved to a different file and renamed] Fixes: 85dd2c8f ("netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator") Fixes: f5f82cd1 ("Move netfs_extract_iter_to_sg() to lib/scatterlist.c") Signed-off-by:
-
Alexei Starovoitov authored
Puranjay Mohan says: ==================== bpf: prevent userspace memory access V5: https://lore.kernel.org/bpf/20240324185356.59111-1-puranjay12@gmail.com/ Changes in V6: - Disable the verifier's instrumentation in x86-64 and update the JIT to take care of vsyscall page in addition to userspace addresses. - Update bpf_testmod to test for vsyscall addresses. V4: https://lore.kernel.org/bpf/20240321124640.8870-1-puranjay12@gmail.com/ Changes in V5: - Use TASK_SIZE_MAX + PAGE_SIZE, VSYSCALL_ADDR as userspace boundary in x86-64 JIT. - Added Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> V3: https://lore.kernel.org/bpf/20240321120842.78983-1-puranjay12@gmail.com/ Changes in V4: - Disable this feature on architectures that don't define CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE. - By doing the above, we don't need anything explicitly for s390x. V2: https://lore.kernel.org/bpf/20240321101058.68530-1-puranjay12@gmail.com/ Changes in V3: - Return 0 from bpf_arch_uaddress_limit() in disabled case because it returns u64. - Modify the check in verifier to no do instrumentation when uaddress_limit is 0. V1: https://lore.kernel.org/bpf/20240320105436.4781-1-puranjay12@gmail.com/ Changes in V2: - Disable this feature on s390x. With BPF_PROBE_MEM, BPF allows de-referencing an untrusted pointer. To thwart invalid memory accesses, the JITs add an exception table entry for all such accesses. But in case the src_reg + offset is a userspace address, the BPF program might read that memory if the user has mapped it. x86-64 JIT already instruments the BPF_PROBE_MEM based loads with checks to skip loads from userspace addresses, but is doesn't check for vsyscall page because it falls in the kernel address space but is considered a userspace page. The second patch in this series fixes the x86-64 JIT to also skip loads from the vsyscall page. The last patch updates the bpf_testmod so this address can be checked as part of the selftests. Other architectures don't have the complexity of the vsyscall address and just need to skip loads from the userspace. To make this more scalable and robust, the verifier is updated in the first patch to instrument BPF_PROBE_MEM to skip loads from the userspace addresses. ==================== Link: https://lore.kernel.org/r/20240424100210.11982-1-puranjay@kernel.orgSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Puranjay Mohan authored
The vsyscall is a legacy API for fast execution of system calls. It maps a page at address VSYSCALL_ADDR into the userspace program. This address is in the top 10MB of the address space: ffffffffff600000 - ffffffffff600fff | 4 kB | legacy vsyscall ABI The last commit fixes the x86-64 BPF JIT to skip accessing addresses in this memory region. Add this address to bpf_testmod_return_ptr() so we can make sure that it is fixed. After this change and without the previous commit, subprogs_extable selftest will crash the kernel. Signed-off-by:
Puranjay Mohan <puranjay@kernel.org> Link: https://lore.kernel.org/r/20240424100210.11982-4-puranjay@kernel.orgSigned-off-by:
-
Puranjay Mohan authored
When a load is marked PROBE_MEM - e.g. due to PTR_UNTRUSTED access - the address being loaded from is not necessarily valid. The BPF jit sets up exception handlers for each such load which catch page faults and 0 out the destination register. If the address for the load is outside kernel address space, the load will escape the exception handling and crash the kernel. To prevent this from happening, the emits some instruction to verify that addr is > end of userspace addresses. x86 has a legacy vsyscall ABI where a page at address 0xffffffffff600000 is mapped with user accessible permissions. The addresses in this page are considered userspace addresses by the fault handler. Therefore, a BPF program accessing this page will crash the kernel. This patch fixes the runtime checks to also check that the PROBE_MEM address is below VSYSCALL_ADDR. Example BPF program: SEC("fentry/tcp_v4_connect") int BPF_PROG(fentry_tcp_v4_connect, struct sock *sk) { *(volatile unsigned long *)&sk->sk_tsq_flags; return 0; } BPF Assembly: 0: (79) r1 = *(u64 *)(r1 +0) 1: (79) r1 = *(u64 *)(r1 +344) 2: (b7) r0 = 0 3: (95) exit x86-64 JIT ========== BEFORE AFTER ------ ----- 0: nopl 0x0(%rax,%rax,1) 0: nopl 0x0(%rax,%rax,1) 5: xchg %ax,%ax 5: xchg %ax,%ax 7: push %rbp 7: push %rbp 8: mov %rsp,%rbp 8: mov %rsp,%rbp b: mov 0x0(%rdi),%rdi b: mov 0x0(%rdi),%rdi ------------------------------------------------------------------------------- f: movabs $0x100000000000000,%r11 f: movabs $0xffffffffff600000,%r10 19: add $0x2a0,%rdi 19: mov %rdi,%r11 20: cmp %r11,%rdi 1c: add $0x2a0,%r11 23: jae 0x0000000000000029 23: sub %r10,%r11 25: xor %edi,%edi 26: movabs $0x100000000a00000,%r10 27: jmp 0x000000000000002d 30: cmp %r10,%r11 29: mov 0x0(%rdi),%rdi 33: ja 0x0000000000000039 --------------------------------\ 35: xor %edi,%edi 2d: xor %eax,%eax \ 37: jmp 0x0000000000000040 2f: leave \ 39: mov 0x2a0(%rdi),%rdi 30: ret \-------------------------------------------- 40: xor %eax,%eax 42: leave 43: ret Signed-off-by: -
Puranjay Mohan authored
With BPF_PROBE_MEM, BPF allows de-referencing an untrusted pointer. To thwart invalid memory accesses, the JITs add an exception table entry for all such accesses. But in case the src_reg + offset is a userspace address, the BPF program might read that memory if the user has mapped it. Make the verifier add guard instructions around such memory accesses and skip the load if the address falls into the userspace region. The JITs need to implement bpf_arch_uaddress_limit() to define where the userspace addresses end for that architecture or TASK_SIZE is taken as default. The implementation is as follows: REG_AX = SRC_REG if(offset) REG_AX += offset; REG_AX >>= 32; if (REG_AX <= (uaddress_limit >> 32)) DST_REG = 0; else DST_REG = *(size *)(SRC_REG + offset); Comparing just the upper 32 bits of the load address with the upper 32 bits of uaddress_limit implies that the values are being aligned down to a 4GB boundary before comparison. The above means that all loads with address <= uaddress_limit + 4GB are skipped. This is acceptable because there is a large hole (much larger than 4GB) between userspace and kernel space memory, therefore a correctly functioning BPF program should not access this 4GB memory above the userspace. Let's analyze what this patch does to the following fentry program dereferencing an untrusted pointer: SEC("fentry/tcp_v4_connect") int BPF_PROG(fentry_tcp_v4_connect, struct sock *sk) { *(volatile long *)sk; return 0; } BPF Program before | BPF Program after ------------------ | ----------------- 0: (79) r1 = *(u64 *)(r1 +0) 0: (79) r1 = *(u64 *)(r1 +0) ----------------------------------------------------------------------- 1: (79) r1 = *(u64 *)(r1 +0) --\ 1: (bf) r11 = r1 ----------------------------\ \ 2: (77) r11 >>= 32 2: (b7) r0 = 0 \ \ 3: (b5) if r11 <= 0x8000 goto pc+2 3: (95) exit \ \-> 4: (79) r1 = *(u64 *)(r1 +0) \ 5: (05) goto pc+1 \ 6: (b7) r1 = 0 \-------------------------------------- 7: (b7) r0 = 0 8: (95) exit As you can see from above, in the best case (off=0), 5 extra instructions are emitted. Now, we analyze the same program after it has gone through the JITs of ARM64 and RISC-V architectures. We follow the single load instruction that has the untrusted pointer and see what instrumentation has been added around it. x86-64 JIT ========== JIT's Instrumentation (upstream) --------------------- 0: nopl 0x0(%rax,%rax,1) 5: xchg %ax,%ax 7: push %rbp 8: mov %rsp,%rbp b: mov 0x0(%rdi),%rdi --------------------------------- f: movabs $0x800000000000,%r11 19: cmp %r11,%rdi 1c: jb 0x000000000000002a 1e: mov %rdi,%r11 21: add $0x0,%r11 28: jae 0x000000000000002e 2a: xor %edi,%edi 2c: jmp 0x0000000000000032 2e: mov 0x0(%rdi),%rdi --------------------------------- 32: xor %eax,%eax 34: leave 35: ret The x86-64 JIT already emits some instructions to protect against user memory access. This patch doesn't make any changes for the x86-64 JIT. ARM64 JIT ========= No Intrumentation Verifier's Instrumentation (upstream) (This patch) ----------------- -------------------------- 0: add x9, x30, #0x0 0: add x9, x30, #0x0 4: nop 4: nop 8: paciasp 8: paciasp c: stp x29, x30, [sp, #-16]! c: stp x29, x30, [sp, #-16]! 10: mov x29, sp 10: mov x29, sp 14: stp x19, x20, [sp, #-16]! 14: stp x19, x20, [sp, #-16]! 18: stp x21, x22, [sp, #-16]! 18: stp x21, x22, [sp, #-16]! 1c: stp x25, x26, [sp, #-16]! 1c: stp x25, x26, [sp, #-16]! 20: stp x27, x28, [sp, #-16]! 20: stp x27, x28, [sp, #-16]! 24: mov x25, sp 24: mov x25, sp 28: mov x26, #0x0 28: mov x26, #0x0 2c: sub x27, x25, #0x0 2c: sub x27, x25, #0x0 30: sub sp, sp, #0x0 30: sub sp, sp, #0x0 34: ldr x0, [x0] 34: ldr x0, [x0] -------------------------------------------------------------------------------- 38: ldr x0, [x0] ----------\ 38: add x9, x0, #0x0 -----------------------------------\\ 3c: lsr x9, x9, #32 3c: mov x7, #0x0 \\ 40: cmp x9, #0x10, lsl #12 40: mov sp, sp \\ 44: b.ls 0x0000000000000050 44: ldp x27, x28, [sp], #16 \\--> 48: ldr x0, [x0] 48: ldp x25, x26, [sp], #16 \ 4c: b 0x0000000000000054 4c: ldp x21, x22, [sp], #16 \ 50: mov x0, #0x0 50: ldp x19, x20, [sp], #16 \--------------------------------------- 54: ldp x29, x30, [sp], #16 54: mov x7, #0x0 58: add x0, x7, #0x0 58: mov sp, sp 5c: autiasp 5c: ldp x27, x28, [sp], #16 60: ret 60: ldp x25, x26, [sp], #16 64: nop 64: ldp x21, x22, [sp], #16 68: ldr x10, 0x0000000000000070 68: ldp x19, x20, [sp], #16 6c: br x10 6c: ldp x29, x30, [sp], #16 70: add x0, x7, #0x0 74: autiasp 78: ret 7c: nop 80: ldr x10, 0x0000000000000088 84: br x10 There are 6 extra instructions added in ARM64 in the best case. This will become 7 in the worst case (off != 0). RISC-V JIT (RISCV_ISA_C Disabled) ========== No Intrumentation Verifier's Instrumentation (upstream) (This patch) ----------------- -------------------------- 0: nop 0: nop 4: nop 4: nop 8: li a6, 33 8: li a6, 33 c: addi sp, sp, -16 c: addi sp, sp, -16 10: sd s0, 8(sp) 10: sd s0, 8(sp) 14: addi s0, sp, 16 14: addi s0, sp, 16 18: ld a0, 0(a0) 18: ld a0, 0(a0) --------------------------------------------------------------- 1c: ld a0, 0(a0) --\ 1c: mv t0, a0 --------------------------\ \ 20: srli t0, t0, 32 20: li a5, 0 \ \ 24: lui t1, 4096 24: ld s0, 8(sp) \ \ 28: sext.w t1, t1 28: addi sp, sp, 16 \ \ 2c: bgeu t1, t0, 12 2c: sext.w a0, a5 \ \--> 30: ld a0, 0(a0) 30: ret \ 34: j 8 \ 38: li a0, 0 \------------------------------ 3c: li a5, 0 40: ld s0, 8(sp) 44: addi sp, sp, 16 48: sext.w a0, a5 4c: ret There are 7 extra instructions added in RISC-V. Fixes: 80083428 ("bpf, arm64: Add BPF exception tables") Reported-by:Breno Leitao <leitao@debian.org> Suggested-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20240424100210.11982-2-puranjay@kernel.orgSigned-off-by:
-
David Bauer authored
Drop the flow-hash of the skb when forwarding to the L2TP netdev. This avoids the L2TP qdisc from using the flow-hash from the outer packet, which is identical for every flow within the tunnel. This does not affect every platform but is specific for the ethernet driver. It depends on the platform including L4 information in the flow-hash. One such example is the Mediatek Filogic MT798x family of networking processors. Fixes: d9e31d17 ("l2tp: Add L2TP ethernet pseudowire support") Acked-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
David Bauer <mail@david-bauer.net> Reviewed-by:
Paolo Abeni <pabeni@redhat.com>
-
Kuniyuki Iwashima authored
syzbot triggered various splats (see [0] and links) by a crafted GSO packet of VIRTIO_NET_HDR_GSO_UDP layering the following protocols: ETH_P_8021AD + ETH_P_NSH + ETH_P_IPV6 + IPPROTO_UDP NSH can encapsulate IPv4, IPv6, Ethernet, NSH, and MPLS. As the inner protocol can be Ethernet, NSH GSO handler, nsh_gso_segment(), calls skb_mac_gso_segment() to invoke inner protocol GSO handlers. nsh_gso_segment() does the following for the original skb before calling skb_mac_gso_segment() 1. reset skb->network_header 2. save the original skb->{mac_heaeder,mac_len} in a local variable 3. pull the NSH header 4. resets skb->mac_header 5. set up skb->mac_len and skb->protocol for the inner protocol. and does the following for the segmented skb 6. set ntohs(ETH_P_NSH) to skb->protocol 7. push the NSH header 8. restore skb->mac_header 9. set skb->mac_header + mac_len to skb->network_header 10. restore skb->mac_len There are two problems in 6-7 and 8-9. (a) After 6 & 7, skb->data points to the NSH header, so the outer header (ETH_P_8021AD in this case) is stripped when skb is sent out of netdev. Also, if NSH is encapsulated by NSH + Ethernet (so NSH-Ethernet-NSH), skb_pull() in the first nsh_gso_segment() will make skb->data point to the middle of the outer NSH or Ethernet header because the Ethernet header is not pulled by the second nsh_gso_segment(). (b) While restoring skb->{mac_header,network_header} in 8 & 9, nsh_gso_segment() does not assume that the data in the linear buffer is shifted. However, udp6_ufo_fragment() could shift the data and change skb->mac_header accordingly as demonstrated by syzbot. If this happens, even the restored skb->mac_header points to the middle of the outer header. It seems nsh_gso_segment() has never worked with outer headers so far. At the end of nsh_gso_segment(), the outer header must be restored for the segmented skb, instead of the NSH header. To do that, let's calculate the outer header position relatively from the inner header and set skb->{data,mac_header,protocol} properly. [0]: BUG: KMSAN: uninit-value in ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline] BUG: KMSAN: uninit-value in ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] BUG: KMSAN: uninit-value in ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668 ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668 ipvlan_start_xmit+0x5c/0x1a0 drivers/net/ipvlan/ipvlan_main.c:222 __netdev_start_xmit include/linux/netdevice.h:4989 [inline] netdev_start_xmit include/linux/netdevice.h:5003 [inline] xmit_one net/core/dev.c:3547 [inline] dev_hard_start_xmit+0x244/0xa10 net/core/dev.c:3563 __dev_queue_xmit+0x33ed/0x51c0 net/core/dev.c:4351 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook mm/slub.c:3819 [inline] slab_alloc_node mm/slub.c:3860 [inline] __do_kmalloc_node mm/slub.c:3980 [inline] __kmalloc_node_track_caller+0x705/0x1000 mm/slub.c:4001 kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582 __alloc_skb+0x352/0x790 net/core/skbuff.c:651 skb_segment+0x20aa/0x7080 net/core/skbuff.c:4647 udp6_ufo_fragment+0xcab/0x1150 net/ipv6/udp_offload.c:109 ipv6_gso_segment+0x14be/0x2ca0 net/ipv6/ip6_offload.c:152 skb_mac_gso_segment+0x3e8/0x760 net/core/gso.c:53 nsh_gso_segment+0x6f4/0xf70 net/nsh/nsh.c:108 skb_mac_gso_segment+0x3e8/0x760 net/core/gso.c:53 __skb_gso_segment+0x4b0/0x730 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x107f/0x1930 net/core/dev.c:3628 __dev_queue_xmit+0x1f28/0x51c0 net/core/dev.c:4343 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 1 PID: 5101 Comm: syz-executor421 Not tainted 6.8.0-rc5-syzkaller-00297-gf2e367d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Fixes: c411ed85 ("nsh: add GSO support") Reported-and-tested-by: syzbot+42a0dc856239de4de60e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=42a0dc856239de4de60e Reported-and-tested-by: syzbot+c298c9f0e46a3c86332b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c298c9f0e46a3c86332b Link: https://lore.kernel.org/netdev/20240415222041.18537-1-kuniyu@amazon.com/Signed-off-by:Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240424023549.21862-1-kuniyu@amazon.comSigned-off-by:
-
Jakub Kicinski authored
Bui Quang Minh says: ==================== Ensure the copied buf is NUL terminated (part) I found that some drivers contains an out-of-bound read pattern like this kern_buf = memdup_user(user_buf, count); ... sscanf(kern_buf, ...); The sscanf can be replaced by some other string-related functions. This pattern can lead to out-of-bound read of kern_buf in string-related functions. This series fix the above issue by replacing memdup_user with memdup_user_nul. v1: https://lore.kernel.org/r/20240422-fix-oob-read-v1-0-e02854c30174@gmail.com ==================== Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-0-f1f1b53a10f4@gmail.comSigned-off-by:
-
Bui Quang Minh authored
We try to access count + 1 byte from userspace with memdup_user(buffer, count + 1). However, the userspace only provides buffer of count bytes and only these count bytes are verified to be okay to access. To ensure the copied buffer is NUL terminated, we use memdup_user_nul instead. Fixes: 3a2eb515 ("octeontx2-af: Fix an off by one in rvu_dbg_qsize_write()") Signed-off-by:
Bui Quang Minh <minhquangbui99@gmail.com> Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-6-f1f1b53a10f4@gmail.comSigned-off-by:
-
Bui Quang Minh authored
Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user. Fixes: 7afc5dbd ("bna: Add debugfs interface.") Signed-off-by:
-
Bui Quang Minh authored
Currently, we allocate a count-sized kernel buffer and copy count bytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user. Fixes: 96a9a934 ("ice: configure FW logging") Fixes: 73671c31 ("ice: enable FW logging") Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
-
- 25 Apr, 2024 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, wireless and bluetooth. Nothing major, regression fixes are mostly in drivers, two more of those are flowing towards us thru various trees. I wish some of the changes went into -rc5, we'll try to keep an eye on frequency of PRs from sub-trees. Also disproportional number of fixes for bugs added in v6.4, strange coincidence. Current release - regressions: - igc: fix LED-related deadlock on driver unbind - wifi: mac80211: small fixes to recent clean up of the connection process - Revert "wifi: iwlwifi: bump FW API to 90 for BZ/SC devices", kernel doesn't have all the code to deal with that version, yet - Bluetooth: - set power_ctrl_enabled on NULL returned by gpiod_get_optional() - qca: fix invalid device address check, again - eth: ravb: fix registered interrupt names Current release - new code bugs: - wifi: mac80211: check EHT/TTLM action frame length Previous releases - regressions: - fix sk_memory_allocated_{add|sub} for architectures where __this_cpu_{add|sub}* are not IRQ-safe - dsa: mv88e6xx: fix link setup for 88E6250 Previous releases - always broken: - ip: validate dev returned from __in_dev_get_rcu(), prevent possible null-derefs in a few places - switch number of for_each_rcu() loops using call_rcu() on the iterator to for_each_safe() - macsec: fix isolation of broadcast traffic in presence of offload - vxlan: drop packets from invalid source address - eth: mlxsw: trap and ACL programming fixes - eth: bnxt: PCIe error recovery fixes, fix counting dropped packets - Bluetooth: - lots of fixes for the command submission rework from v6.4 - qca: fix NULL-deref on non-serdev suspend Misc: - tools: ynl: don't ignore errors in NLMSG_DONE messages" * tag 'net-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc(). net: b44: set pause params only when interface is up tls: fix lockless read of strp->msg_ready in ->poll dpll: fix dpll_pin_on_pin_register() for multiple parent pins net: ravb: Fix registered interrupt names octeontx2-af: fix the double free in rvu_npc_freemem() net: ethernet: ti: am65-cpts: Fix PTPv1 message type on TX packets ice: fix LAG and VF lock dependency in ice_reset_vf() iavf: Fix TC config comparison with existing adapter TC config i40e: Report MFS in decimal base instead of hex i40e: Do not use WQ_MEM_RECLAIM flag for workqueue net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns() net/mlx5e: Advertise mlx5 ethernet driver updates sk_buff md_dst for MACsec macsec: Detect if Rx skb is macsec-related for offloading devices that update md_dst ethernet: Add helper for assigning packet type when dest address does not match device address macsec: Enable devices to advertise whether they update sk_buff md_dst during offloads net: phy: dp83869: Fix MII mode failure netfilter: nf_tables: honor table dormant flag from netdev release event path eth: bnxt: fix counting packets discarded due to OOM and netpoll igc: Fix LED-related deadlock on driver unbind ... -
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: - Revert some backchannel fixes that went into v6.9-rc * tag 'nfsd-6.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: Revert "NFSD: Convert the callback workqueue to use delayed_work" Revert "NFSD: Reschedule CB operations when backchannel rpc_clnt is shut down"
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Benjamin Tissoires: - A couple of i2c-hid fixes (Kenny Levinsen & Nam Cao) - A config issue with mcp-2221 when CONFIG_IIO is not enabled (Abdelrahman Morsy) - A dev_err fix in intel-ish-hid (Zhang Lixu) - A couple of mouse fixes for both nintendo and Logitech-dj (Nuno Pereira and Yaraslau Furman) - I'm changing my main kernel email address as it's way simpler for me than the Red Hat one (Benjamin Tissoires) * tag 'for-linus-2024042501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: mcp-2221: cancel delayed_work only when CONFIG_IIO is enabled HID: logitech-dj: allow mice to use all types of reports HID: i2c-hid: Revert to await reset ACK before reading report descriptor HID: nintendo: Fix N64 controller being identified as mouse MAINTAINERS: update Benjamin's email address HID: intel-ish-hid: ipc: Fix dev_err usage with uninitialized dev->devc HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains two Netfilter/IPVS fixes for net: Patch #1 fixes SCTP checksumming for IPVS with gso packets, from Ismael Luceno. Patch #2 honor dormant flag from netdev event path to fix a possible double hook unregistration. * tag 'nf-24-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: honor table dormant flag from netdev release event path ipvs: Fix checksumming on GSO of SCTP packets ==================== Link: https://lore.kernel.org/r/20240425090149.1359547-1-pablo@netfilter.orgSigned-off-by:
-
Kuniyuki Iwashima authored
syzbot reported a lockdep splat regarding unix_gc_lock and unix_state_lock(). One is called from recvmsg() for a connected socket, and another is called from GC for TCP_LISTEN socket. So, the splat is false-positive. Let's add a dedicated lock class for the latter to suppress the splat. Note that this change is not necessary for net-next.git as the issue is only applied to the old GC impl. [0]: WARNING: possible circular locking dependency detected 6.9.0-rc5-syzkaller-00007-g4d200843 #0 Not tainted ----------------------------------------------------- kworker/u8:1/11 is trying to acquire lock: ffff88807cea4e70 (&u->lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff88807cea4e70 (&u->lock){+.+.}-{2:2}, at: __unix_gc+0x40e/0xf70 net/unix/garbage.c:302 but task is already holding lock: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: __unix_gc+0x117/0xf70 net/unix/garbage.c:261 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (unix_gc_lock){+.+.}-{2:2}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] unix_notinflight+0x13d/0x390 net/unix/garbage.c:140 unix_detach_fds net/unix/af_unix.c:1819 [inline] unix_destruct_scm+0x221/0x350 net/unix/af_unix.c:1876 skb_release_head_state+0x100/0x250 net/core/skbuff.c:1188 skb_release_all net/core/skbuff.c:1200 [inline] __kfree_skb net/core/skbuff.c:1216 [inline] kfree_skb_reason+0x16d/0x3b0 net/core/skbuff.c:1252 kfree_skb include/linux/skbuff.h:1262 [inline] manage_oob net/unix/af_unix.c:2672 [inline] unix_stream_read_generic+0x1125/0x2700 net/unix/af_unix.c:2749 unix_stream_splice_read+0x239/0x320 net/unix/af_unix.c:2981 do_splice_read fs/splice.c:985 [inline] splice_file_to_pipe+0x299/0x500 fs/splice.c:1295 do_splice+0xf2d/0x1880 fs/splice.c:1379 __do_splice fs/splice.c:1436 [inline] __do_sys_splice fs/splice.c:1652 [inline] __se_sys_splice+0x331/0x4a0 fs/splice.c:1634 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (&u->lock){+.+.}-{2:2}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __unix_gc+0x40e/0xf70 net/unix/garbage.c:302 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa10/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(unix_gc_lock); lock(&u->lock); lock(unix_gc_lock); lock(&u->lock); *** DEADLOCK *** 3 locks held by kworker/u8:1/11: #0: ffff888015089148 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline] #0: ffff888015089148 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x17c0 kernel/workqueue.c:3335 #1: ffffc90000107d00 (unix_gc_work){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline] #1: ffffc90000107d00 (unix_gc_work){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x17c0 kernel/workqueue.c:3335 #2: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #2: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: __unix_gc+0x117/0xf70 net/unix/garbage.c:261 stack backtrace: CPU: 0 PID: 11 Comm: kworker/u8:1 Not tainted 6.9.0-rc5-syzkaller-00007-g4d200843 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: events_unbound __unix_gc Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __unix_gc+0x40e/0xf70 net/unix/garbage.c:302 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa10/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Fixes: 47d8ac01 ("af_unix: Fix garbage collector racing against connect()") Reported-and-tested-by: syzbot+fa379358c28cc87cc307@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=fa379358c28cc87cc307Signed-off-by:
-
Peter Münster authored
b44_free_rings() accesses b44::rx_buffers (and ::tx_buffers) unconditionally, but b44::rx_buffers is only valid when the device is up (they get allocated in b44_open(), and deallocated again in b44_close()), any other time these are just a NULL pointers. So if you try to change the pause params while the network interface is disabled/administratively down, everything explodes (which likely netifd tries to do). Link: https://github.com/openwrt/openwrt/issues/13789 Fixes: 1da177e4 (Linux-2.6.12-rc2) Cc: stable@vger.kernel.org Reported-by:
Peter Münster <pm@a16n.net> Suggested-by:
Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by:
Vaclav Svoboda <svoboda@neng.cz> Tested-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/87y192oolj.fsf@a16n.netSigned-off-by:
-
Sabrina Dubroca authored
tls_sk_poll is called without locking the socket, and needs to read strp->msg_ready (via tls_strp_msg_ready). Convert msg_ready to a bool and use READ_ONCE/WRITE_ONCE where needed. The remaining reads are only performed when the socket is locked. Fixes: 121dca78 ("tls: suppress wakeups unless we have a full record") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/0b7ee062319037cf86af6b317b3d72f7bfcd2e97.1713797701.git.sd@queasysnail.netSigned-off-by:
-
Arkadiusz Kubalewski authored
In scenario where pin is registered with multiple parent pins via dpll_pin_on_pin_register(..), all belonging to the same dpll device. A second call to dpll_pin_on_pin_unregister(..) would cause a call trace, as it tries to use already released registration resources (due to fix introduced in b446631f). In this scenario pin was registered twice, so resources are not yet expected to be release until each registered pin/pin pair is unregistered. Currently, the following crash/call trace is produced when ice driver is removed on the system with installed E810T NIC which includes dpll device: WARNING: CPU: 51 PID: 9155 at drivers/dpll/dpll_core.c:809 dpll_pin_ops+0x20/0x30 RIP: 0010:dpll_pin_ops+0x20/0x30 Call Trace: ? __warn+0x7f/0x130 ? dpll_pin_ops+0x20/0x30 dpll_msg_add_pin_freq+0x37/0x1d0 dpll_cmd_pin_get_one+0x1c0/0x400 ? __nlmsg_put+0x63/0x80 dpll_pin_event_send+0x93/0x140 dpll_pin_on_pin_unregister+0x3f/0x100 ice_dpll_deinit_pins+0xa1/0x230 [ice] ice_remove+0xf1/0x210 [ice] Fix by adding a parent pointer as a cookie when creating a registration, also when searching for it. For the regular pins pass NULL, this allows to create separated registration for each parent the pin is registered with. Fixes: b446631f ("dpll: fix dpll_xa_ref_*_del() for multiple registrations") Signed-off-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240424101636.1491424-1-arkadiusz.kubalewski@intel.comSigned-off-by:
-
Geert Uytterhoeven authored
As interrupts are now requested from ravb_probe(), before calling register_netdev(), ndev->name still contains the template "eth%d", leading to funny names in /proc/interrupts. E.g. on R-Car E3: 89: 0 0 GICv2 93 Level eth%d:ch22:multi 90: 0 3 GICv2 95 Level eth%d:ch24:emac 91: 0 23484 GICv2 71 Level eth%d:ch0:rx_be 92: 0 0 GICv2 72 Level eth%d:ch1:rx_nc 93: 0 13735 GICv2 89 Level eth%d:ch18:tx_be 94: 0 0 GICv2 90 Level eth%d:ch19:tx_nc Worse, on platforms with multiple RAVB instances (e.g. R-Car V4H), all interrupts have similar names. Fix this by using the device name instead, like is done in several other drivers: 89: 0 0 GICv2 93 Level e6800000.ethernet:ch22:multi 90: 0 1 GICv2 95 Level e6800000.ethernet:ch24:emac 91: 0 28578 GICv2 71 Level e6800000.ethernet:ch0:rx_be 92: 0 0 GICv2 72 Level e6800000.ethernet:ch1:rx_nc 93: 0 14044 GICv2 89 Level e6800000.ethernet:ch18:tx_be 94: 0 0 GICv2 90 Level e6800000.ethernet:ch19:tx_nc Rename the local variable dev_name, as it shadows the dev_name() function, and pre-initialize it, to simplify the code. Fixes: 32f012b8 ("net: ravb: Move getting/requesting IRQs in the probe() method") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by:
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S Link: https://lore.kernel.org/r/cde67b68adf115b3cf0b44c32334ae00b2fbb321.1713944647.git.geert+renesas@glider.beSigned-off-by:
-
Su Hui authored
Clang static checker(scan-build) warning： drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c:line 2184, column 2 Attempt to free released memory. npc_mcam_rsrcs_deinit() has released 'mcam->counters.bmap'. Deleted this redundant kfree() to fix this double free problem. Fixes: dd784287 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs") Signed-off-by:
Su Hui <suhui@nfschina.com> Reviewed-by:
Geetha sowjanya <gakula@marvell.com> Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by:
Hariprasad Kelam <hkelam@marvell.com> Link: https://lore.kernel.org/r/20240424022724.144587-1-suhui@nfschina.comSigned-off-by:
-
Jason Reeder authored
The CPTS, by design, captures the messageType (Sync, Delay_Req, etc.) field from the second nibble of the PTP header which is defined in the PTPv2 (1588-2008) specification. In the PTPv1 (1588-2002) specification the first two bytes of the PTP header are defined as the versionType which is always 0x0001. This means that any PTPv1 packets that are tagged for TX timestamping by the CPTS will have their messageType set to 0x0 which corresponds to a Sync message type. This causes issues when a PTPv1 stack is expecting a Delay_Req (messageType: 0x1) timestamp that never appears. Fix this by checking if the ptp_class of the timestamped TX packet is PTP_CLASS_V1 and then matching the PTP sequence ID to the stored sequence ID in the skb->cb data structure. If the sequence IDs match and the packet is of type PTPv1 then there is a chance that the messageType has been incorrectly stored by the CPTS so overwrite the messageType stored by the CPTS with the messageType from the skb->cb data structure. This allows the PTPv1 stack to receive TX timestamps for Delay_Req packets which are necessary to lock onto a PTP Leader. Signed-off-by:
Jason Reeder <jreeder@ti.com> Signed-off-by:
Ravi Gunasekaran <r-gunasekaran@ti.com> Tested-by:
Ed Trexel <ed.trexel@hp.com> Fixes: f6bd5952 ("net: ethernet: ti: introduce am654 common platform time sync driver") Link: https://lore.kernel.org/r/20240424071626.32558-1-r-gunasekaran@ti.comSigned-off-by:
-
