Merge tag 'at91-defconfig-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig

AT91 defconfig for 6.2 #2

It contains:
- updates for defconfigs to use the new CONFIG_VIDEO_MICROCHIP_ISC,
  CONFIG_VIDEO_MICROCHIP_XISC config flags that replaced the
  CONFIG_VIDEO_ATMEL_ISC, CONFIG_VIDEO_ATMEL_XISC. Drivers under
  CONFIG_VIDEO_ATMEL_* were moved to staging and considered deprecated.

* tag 'at91-defconfig-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: configs: multi_v7: switch to new MICROCHIP_ISC driver
  ARM: configs: sama5/7: switch to new MICROCHIP_ISC driver

Link: https://lore.kernel.org/r/20221125142736.385654-1-claudiu.beznea@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the Qualcomm SM6115 / SM4250 TLMM pinctrl and GCC clock drivers.
They need to be builtin to ensure that the UART is allowed to probe
before user space needs a console.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221128200834.1776868-1-bhupesh.sharma@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The ATMEL_ISC and ATMEL_XISC have been deprecated and moved to staging.
Use the new MICROCHIP_ISC/MICROCHIP_XISC symbols which are the
replacement drivers.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221125130646.454084-2-eugen.hristev@microchip.com

The ATMEL_ISC and ATMEL_XISC have been deprecated and moved to staging.
Use the new MICROCHIP_ISC/MICROCHIP_XISC symbols which are the
replacement drivers.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221125130646.454084-1-eugen.hristev@microchip.com

Merge tag 'qcom-defconfig-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig

Qualcomm ARM defconfig updates

This enables remaining Qualcomm TLMM pinctrl drivers in the
qcom_defconfig.

* tag 'qcom-defconfig-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: qcom_defconfig: enable rest of ARMv7 SoCs pinctrl drivers

Link: https://lore.kernel.org/r/20221122203452.1855254-1-andersson@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-defconfig-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig

Qualcomm ARM64 defconfig updates for 6.2

This enables more Qualcomm TLMM pinctrl drivers, and the Qualcomm crypto
drivers.

It makes the SC7180 and SM8450 interconnect drivers builtin, in order to
ensure that a console will be registered before init needs it.

* tag 'qcom-arm64-defconfig-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: defconfig: build-in Qualcomm SC7180 and SM8450 interconnects
  arm64: defconfig: Enable Qualcomm QCE crypto
  arm64: defconfig: enable rest of Qualcomm ARMv8 SoCs pinctrl drivers

Merge tag 'ti-k3-config-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/defconfig

arm64: TI K3 defconfig updates for v6.2

* Enable TI_TFP410 DVI bridge as module for J721e-sk platform

* tag 'ti-k3-config-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  arm64: defconfig: Enable TI_TFP410 DVI bridge

Link: https://lore.kernel.org/r/20221122190233.63o3tjtkimlimgtq@armrestSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.1-next-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig

- enable missing drivers for to boot from MT8183 based chromebooks

* tag 'v6.1-next-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: defconfig: Enable missing configs for mt8183-jacuzzi-juniper

Link: https://lore.kernel.org/r/610edfca-0a3a-fd41-5208-71978866be4f@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-defconfig-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig

i.MX defconfig change for 6.2:

- Enable Renesas 9-series PCIe clock generator, SNVS LPGRP and i.MX8MP
  interconnect driver support in arm64 defconfig.
- Enable Silergy SY7636A EPD PMIC, CYTTSP5 touchscreen and USB GPIO
  extcon support in imx_v6_v7_defconfig.

* tag 'imx-defconfig-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: defconfig: Add Renesas 9-series PCIe clock generator
  ARM: imx_v6_v7_defconfig: Enable the cyttsp5 touchscreen
  ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a
  ARM: imx_v6_v7_defconfig: Enable USB GPIO extcon support
  arm64: defconfig: enable i.mx 8m plus specific interconnect support
  arm64: defconfig: enable snvs lpgpr support

Link: https://lore.kernel.org/r/20221119125733.32719-6-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-6.2-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig

arm64: tegra: Default configuration updates for v6.2-rc1

This enables several audio-related options, as well as the Tegra186
timer and hardware timestamping engine drivers.

* tag 'tegra-for-6.2-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: defconfig: Enable HTE config
  arm64: defconfig: Enable Tegra186 timer support
  arm64: defconfig: Enable SND_ALOOP
  arm64: defconfig: Enable couple of audio codecs

Link: https://lore.kernel.org/r/20221119012025.3968358-8-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-riscv-defconfig-for-v6.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig

Renesas RISC-V defconfig updates for v6.2

  - Enable support for the Renesas RZ/Five SoC and the RZ/Five SMARC EVK
    board in the risc-v defconfig.

* tag 'renesas-riscv-defconfig-for-v6.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  riscv: configs: defconfig: Enable Renesas RZ/Five SoC

Link: https://lore.kernel.org/r/cover.1668788928.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-defconfig-for-v6.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig

Renesas ARM defconfig updates for v6.2

  - Enable support for Renesas R-Car S4-8 Spider Ethernet devices in the
    arm64 defconfig.

* tag 'renesas-arm-defconfig-for-v6.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: defconfig: Enable Renesas R-Car S4-8 Spider Ethernet devices

Link: https://lore.kernel.org/r/cover.1668788920.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the USB Type-C UCSI, and the STM32G0 UCSI drivers as modules, since
used on STM32MP13 board.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20221117103931.26174-1-alexandre.torgue@foss.st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Enable Renesas "Ethernet Switch", Ethernet SERDES and Marvell 10G PHY
drivers to be used by NFS root on the Renesas Spider board.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221118120953.1186392-4-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Enable the PL110 DRM driver, used by the spear600.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Refresh the defconfig to follow the changes made over the year.
I ensure important options have not gone away.
I drop the gpio sysfs config as it is useless to keep it alone without
CONFIG_EXPERT.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-defconfig-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig

AT91 defconfig for 6.2

It contains:
- sama7 defconfig refresh (done with make savedefconfig)
- update sama7 defconfig with OTPC support
- update sama7 defconfig with thermal management support

* tag 'at91-defconfig-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: configs: at91: sama7: add config for thermal management
  ARM: configs: at91: sama7: add config for microchip otpc
  ARM: configs: at91: sama7: use make savedefconfig

Link: https://lore.kernel.org/r/20221110115422.180893-1-claudiu.beznea@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Enable HTE core and tegra HTE provider by default as built in
module.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable missing configs in the arm64 defconfig to get all devices probing
on the mt8183-kukui-jacuzzi-juniper machine.

The devices enabled are: ATH10K SDIO wireless adapter, Elan touchscreen,
cr50 TPM, MediaTek SPI controller, JPEG video decoder, ANX7625 DSI/DPI
to DP bridge (used for the internal display), MT8183 sound cards, SCP
co-processor, MediaTek Global Command Engine (controlled by CMDQ
driver), MediaTek Smart Voltage Scaling (SVS) engine, CCI frequency
and voltage scaling, AUXADC thermal sensors.

All symbols are enabled as modules with the exception of SPI, which is
enabled as builtin since on some platforms like mt8195-cherry, the
ChromeOS Embedded Controller is connected through SPI and it is
responsible for the regulators powering the MMC controller used for the
SD card, and thus SPI support is required for booting.

By enabling the support for all of this machine's devices on the
defconfig we make it effortless to test the relevant hardware both by
developers as well as CI systems like KernelCI.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221109195012.1231059-1-nfraprado@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

MBa8MPxL (with TQMa8MPQL attached) needs this driver for PCIe reference
clock generation. Add it do default config.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enable Renesas RZ/Five SoC config in defconfig. It allows the default
upstream kernel to boot on RZ/Five SMARC EVK board.

Alongside enable SERIAL_SH_SCI config so that the serial driver used by
RZ/Five SoC is built-in.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221028165921.94487-8-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The imx6/7 based devices Remarkable 2, Kobo Clara HD, Kobo Libra H2O,
Tolino Shine 3, Tolino Vision 5 all contain a Cypress TT2100
touchscreen so enable the corresponding driver.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enable Tegra186 timer support which is needed for Tegra186, Tegra194 and
Tegra234 devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

On Qualcomm SC7180 and SM8450 SocS, the typical debug console serial
port is part of GENI Serial Engine QUP Wrapper Controller which uses
interconnects.  This means that without interconnect drivers, the serial
might not probe.  Without serial console, the root might not be mounted
by initramfs:

  + REASON=No init found. Try passing init= bootarg. PS1=(initramfs
  ...
  (initramfs) run-init -c /dev/console -n /root /sbin/init
  run-init: opening console: No such file or directory

This means that interconnect drivers on these Qualcomm SoCs cannot be
modules and must be built-in to mount rootfs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221021032702.1340963-1-krzysztof.kozlowski@linaro.org

Now that the QCE crypto block is supported on several
Qualcomm SoCs upstream, enable the same as a module in the
arm64 defconfig.

Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220921045602.1462007-5-bhupesh.sharma@linaro.org

Enable TI_TFP410 DPI to DVI bridge. This is required to enable HDMI
output on j721e-sk platform.
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221103180845.17076-1-r-ravikumar@ti.com

Add config flags for thermal management.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221026124114.985876-10-claudiu.beznea@microchip.com

Add config flag for Microchip OTPC.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221026124114.985876-9-claudiu.beznea@microchip.com

Use make savedefconfig on sama7_defconfig.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221026124114.985876-8-claudiu.beznea@microchip.com

Enable the silergy,sy7636a and silergy,sy7636a-regulator for the
reMarkable2.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enable generic PCM loopback driver.

On NVIDIA Jetson platforms, customers use this to loop data between
container based applications and host OS.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable RT5640 and TAS2552 audio codec drivers.

NVIDIA Jetson platforms have 40-pin GPIO expanders where custom
audio cards can be connected. Support for above codecs is typically
required. Also NVIDIA Jetson AGX Orin platform has RT5640 as onboard
codec. To support these enable driver build for these codecs.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable USB GPIO extcon support aka CONFIG_EXTCON_USB_GPIO as e.g. used
on Colibri iMX6 and Colibri iMX7 for USB device/host role switching.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pull kvm fixes from Paolo Bonzini:
 "RISC-V:

   - Fix compilation without RISCV_ISA_ZICBOM

   - Fix kvm_riscv_vcpu_timer_pending() for Sstc

  ARM:

   - Fix a bug preventing restoring an ITS containing mappings for very
     large and very sparse device topology

   - Work around a relocation handling error when compiling the nVHE
     object with profile optimisation

   - Fix for stage-2 invalidation holding the VM MMU lock for too long
     by limiting the walk to the largest block mapping size

   - Enable stack protection and branch profiling for VHE

   - Two selftest fixes

  x86:

   - add compat implementation for KVM_X86_SET_MSR_FILTER ioctl

  selftests:

   - synchronize includes between include/uapi and tools/include/uapi"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  tools: include: sync include/api/linux/kvm.h
  KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
  KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
  kvm: Add support for arch compat vm ioctls
  RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
  RISC-V: Fix compilation without RISCV_ISA_ZICBOM
  KVM: arm64: vgic: Fix exit condition in scan_its_table()
  KVM: arm64: nvhe: Fix build with profile optimization
  KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
  KVM: arm64: selftests: Fix multiple versions of GIC creation
  KVM: arm64: Enable stack protection and branch profiling for VHE
  KVM: arm64: Limit stage2_apply_range() batch size to largest block
  KVM: arm64: Work out supported block level at compile time

This reverts commit 72a95859.

It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver.  Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.

Fixes: 72a95859 ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch") added
a new entry to the uts_kern_table[] array, but didn't update the
UTS_PROC_xyz enumerators of older entries, breaking anything that used
them.

Which is admittedly not many cases: it's really just the two uses of
uts_proc_notify() in kernel/sys.c.  But apparently journald-systemd
actually uses this to detect hostname changes.
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Fixes: bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch")
Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Cc: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull perf fixes from Borislav Petkov:

 - Fix raw data handling when perf events are used in bpf

 - Rework how SIGTRAPs get delivered to events to address a bunch of
   problems with it. Add a selftest for that too

* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  bpf: Fix sample_flags for bpf_perf_event_output
  selftests/perf_events: Add a SIGTRAP stress test with disables
  perf: Fix missing SIGTRAPs

Pull scheduler fixes from Borislav Petkov:

 - Adjust code to not trip up CFI

 - Fix sched group cookie matching

* tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Introduce struct balance_callback to avoid CFI mismatches
  sched/core: Fix comparison in sched_group_cookie_match()

Pull objtool fix from Borislav Petkov:

 - Fix ORC stack unwinding when GCOV is enabled

* tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fix unreliable stack dump with gcov