- 21 Apr, 2015 25 commits
-
-
Herbert Xu authored
This patch adds a crypto_alg_extsize helper that can be used by algorithm types such as pcompress and shash. Signed-off-by:Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
Initialising the RNG in drbg_kcapi_init is a waste of precious entropy because all users will immediately seed the RNG after the allocation. In fact, all users should seed the RNG before using it. So there is no point in doing the seeding in drbg_kcapi_init. This patch removes the initial seeding and the user must seed the RNG explicitly (as they all currently do). This patch also changes drbg_kcapi_reset to allow reseeding. That is, if you call it after a successful initial seeding, then it will not reset the internal state of the DRBG before mixing the new input and entropy. If you still wish to reset the internal state, you can always free the DRBG and allocate a new one. Finally this patch removes locking from drbg_uninstantiate because it's now only called from the destruction path which must not be executed in parallel with normal operations. Signed-off-by:
Stephan Mueller <smueller@chronox.de>
-
Herbert Xu authored
As we moved the mutex init out of drbg_instantiate and into cra_init we need to explicitly initialise the mutex in drbg_healthcheck_sanity. Signed-off-by:
-
Stephan Mueller authored
As the DRBG does not operate on shadow copies of the DRBG instance any more, the cipher handles only need to be allocated once during initalization time and deallocated during uninstantiate time. Signed-off-by:
-
Stephan Mueller authored
The creation of a shadow copy is intended to only hold a short term lock. But the drawback is that parallel users have a very similar DRBG state which only differs by a high-resolution time stamp. The DRBG will now hold a long term lock. Therefore, the lock is changed to a mutex which implies that the DRBG can only be used in process context. The lock now guards the instantiation as well as the entire DRBG generation operation. Therefore, multiple callers are fully serialized when generating a random number. As the locking is changed to use a long-term lock to avoid such similar DRBG states, the entire creation and maintenance of a shadow copy can be removed. Signed-off-by:
-
Stephan Mueller authored
The drbg_generate returns 0 in success case. That means that drbg_generate_long will always only generate drbg_max_request_bytes at most. Longer requests will be truncated to drbg_max_request_bytes. Reported-by:
-
LEROY Christophe authored
This patch updates the documentation by including SEC1 into SEC2/3 doc Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
LEROY Christophe authored
We add a specific compatible for SEC1, to handle the differences between SEC1 and SEC2+ Signed-off-by:
-
LEROY Christophe authored
SEC1 bugs on 0 data hash, so we submit an already padded block representing 0 data Signed-off-by:
-
LEROY Christophe authored
SEC1 doesn't support scatter/gather, SEC1 doesn't handle link tables. Therefore, for SEC1 we have to do it by SW. For that, we reserve space at the end of the extended descriptor, in lieu of the space reserved for the link tables on SEC2, and we perform sg_copy() when preparing the descriptors We also adapt the max buffer size which is only 32k on SEC1 while it is 64k on SEC2+ Signed-off-by:
-
LEROY Christophe authored
This patch adapts the interrupts handling and reset function for SEC1. On SEC1, registers are almost similar to SEC2+, but bits are sometimes located at different places. So we need to define TALITOS1 and TALITOS2 versions of some fields, and manage according to whether it is SEC1 or SEC2. On SEC1, only one interrupt vector is dedicated to the SEC, so only interrupt_4ch is needed. On SEC1, interrupts are enabled by clearing related bits in IMR, while on SEC2, interrupts are enabled by seting the bits in IMR. SEC1 also performs parity verification in the DES Unit. We have to disable this feature because the test vectors provided in the kernel have parity errors. In reset functions, only SEC2 supports continuation after error. For SEC1, we have to reset in all cases. For errors handling, SEC2+ names have been kept, but displayed text have been amended to reflect exact meaning on SEC1. Signed-off-by:
-
LEROY Christophe authored
SEC 1.0, 1.2 and 2.x+ have different EU base addresses, so we need to define pointers for each EU in the driver private data structure. The proper address is set by the probe function depending on the SEC type, in order to provide access to the proper address. Signed-off-by:
-
LEROY Christophe authored
SEC1 descriptor is a bit different to SEC2+ descriptor. talitos_submit() will have to copy hdr field into hdr1 field and send the descriptor starting at hdr1 up to next_desc. For SEC2, it remains unchanged and next_desc is just ignored. Signed-off-by:
-
LEROY Christophe authored
talitos descriptor is slightly different for SEC1 and SEC2+, so lets the helper function that fills the descriptor take into account the type of SEC. Signed-off-by:
-
LEROY Christophe authored
We add a new feature in the features field, to mark compatible "fsl,sec1.0" We also define a helper function called has_ftr_sec1() to help functions quickly determine if they are running on SEC1 or SEC2+. When only SEC1 or SEC2 is compiled in, has_ftr_sec1() return trivial corresponding value. If both are compiled in, feature field is checked. Signed-off-by:
-
LEROY Christophe authored
This patch adds a CONFIG option to select SEC1, SEC2+ or both. Signed-off-by:
-
LEROY Christophe authored
This patch enhances the talitos_desc struct with fields for SEC1. SEC1 has only one header field, and has a 'next_desc' field in addition. This mixed descriptor will continue to fit SEC2, and for SEC1 we will recopy hdr value into hdr1 value in talitos_submit() Signed-off-by:
-
LEROY Christophe authored
This patch adds a helper function for reads and writes of the len param of the talitos descriptor. This will help implement SEC1 later. Signed-off-by:
-
LEROY Christophe authored
map_single_talitos_ptr() is always called with extent == 0, so lets remove this unused parameter Signed-off-by:
-
LEROY Christophe authored
j_extent field is specific to SEC2 so we add a helper function to clear it so that SEC1 can redefine that function as nop Signed-off-by:
-
LEROY Christophe authored
Linux CodyingStyle recommends to use short variables for local variables. ptr is just good enough for those 3 lines functions. It helps keep single lines shorter than 80 characters. Signed-off-by:
-
LEROY Christophe authored
This patch refactors the handling of the input and output data that is quite similar in several functions Signed-off-by:
-
LEROY Christophe authored
Do use zero_entry value to init the descriptors ptrs to zero instead of writing 0 in each field Signed-off-by:
-
Stephan Mueller authored
The buffer uses for temporary data must be cleared entirely. In AES192 the used buffer is drbg_statelen(drbg) + drbg_blocklen(drbg) as documented in the comment above drbg_ctr_df. This patch ensures that the temp buffer is completely wiped. Signed-off-by:
-
Colin Ian King authored
backlog is not initialised so in the case where cpg->eng_st != ENGINE_IDLE it is never initialised and hence which could lead to an illegal memory dereference in the statement: backlog->complete(backlog, -EINPROGRESS); Discovered with cppcheck static analsys: [drivers/crypto/mv_cesa.c:616]: (error) Uninitialized variable: backlog Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 16 Apr, 2015 1 commit
-
-
Herbert Xu authored
Commit 9c521a20 ("crypto: api - remove instance when test failed") tried to grab a module reference count before the module was even set. Worse, it then goes on to free the module reference count after it is set so you quickly end up with a negative module reference count which prevents people from using any instances belonging to that module. This patch moves the module initialisation before the reference count. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 15 Apr, 2015 14 commits
-
-
Linus Torvalds authored
Merge second patchbomb from Andrew Morton: - the rest of MM - various misc bits - add ability to run /sbin/reboot at reboot time - printk/vsprintf changes - fiddle with seq_printf() return value * akpm: (114 commits) parisc: remove use of seq_printf return value lru_cache: remove use of seq_printf return value tracing: remove use of seq_printf return value cgroup: remove use of seq_printf return value proc: remove use of seq_printf return value s390: remove use of seq_printf return value cris fasttimer: remove use of seq_printf return value cris: remove use of seq_printf return value openrisc: remove use of seq_printf return value ARM: plat-pxa: remove use of seq_printf return value nios2: cpuinfo: remove use of seq_printf return value microblaze: mb: remove use of seq_printf return value ipc: remove use of seq_printf return value rtc: remove use of seq_printf return value power: wakeup: remove use of seq_printf return value x86: mtrr: if: remove use of seq_printf return value linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK MAINTAINERS: CREDITS: remove Stefano Brivio from B43 .mailmap: add Ricardo Ribalda CREDITS: add Ricardo Ribalda Delgado ... -
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
Joe Perches <joe@perches.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Miscellanea: o Remove unused return value from trace_lookup_stack Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Miscellanea: o Coalesce formats, realign arguments Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, (as it is here, it doesn't return # of chars emitted) will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
Michal Simek <monstr@monstr.eu> Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
