- 11 Mar, 2020 6 commits
-
-
Masami Hiramatsu authored
[ Upstream commit e4add247 ] optimize_kprobe() and unoptimize_kprobe() cancels if a given kprobe is on the optimizing_list or unoptimizing_list already. However, since the following commit: f66c0447 ("kprobes: Set unoptimized flag after unoptimizing code") modified the update timing of the KPROBE_FLAG_OPTIMIZED, it doesn't work as expected anymore. The optimized_kprobe could be in the following states: - [optimizing]: Before inserting jump instruction op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [optimized]: jump inserted op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is empty. - [unoptimizing]: Before removing jump instruction (including unused optprobe) op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [unoptimized]: jump removed op.kp->flags doesn't have KPROBE_FLAG_OPTIMIZED and op->list is empty. Current code mis-expects [unoptimizing] state doesn't have KPROBE_FLAG_OPTIMIZED, and that can cause incorrect results. To fix this, introduce optprobe_queued_unopt() to distinguish [optimizing] and [unoptimizing] states and fixes the logic in optimize_kprobe() and unoptimize_kprobe(). [ mingo: Cleaned up the changelog and the code a bit. ] Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Fixes: f66c0447 ("kprobes: Set unoptimized flag after unoptimizing code") Link: https://lkml.kernel.org/r/157840814418.7181.13478003006386303481.stgit@devnote2Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nathan Chancellor authored
[ Upstream commit 4ca501d6 ] Clang warns: ../drivers/infiniband/core/security.c:351:41: warning: converting the enum constant to a boolean [-Wint-in-bool-context] if (!(qp_attr_mask & (IB_QP_PKEY_INDEX || IB_QP_PORT)) && qp_pps) { ^ 1 warning generated. A bitwise OR should have been used instead. Fixes: 1dd01788 ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list") Link: https://lore.kernel.org/r/20200217204318.13609-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/889Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
[ Upstream commit 801b67f3 ] When port is part of the modify mask, then we should take it from the qp_attr and not from the old pps. Same for PKEY. Otherwise there are panics in some configurations: RIP: 0010:get_pkey_idx_qp_list+0x50/0x80 [ib_core] Code: c7 18 e8 13 04 30 ef 0f b6 43 06 48 69 c0 b8 00 00 00 48 03 85 a0 04 00 00 48 8b 50 20 48 8d 48 20 48 39 ca 74 1a 0f b7 73 04 <66> 39 72 10 75 08 eb 10 66 39 72 10 74 0a 48 8b 12 48 39 ca 75 f2 RSP: 0018:ffffafb3480932f0 EFLAGS: 00010203 RAX: ffff98059ababa10 RBX: ffff980d926e8cc0 RCX: ffff98059ababa30 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff98059ababa28 RBP: ffff98059b940000 R08: 00000000000310c0 R09: ffff97fe47c07480 R10: 0000000000000036 R11: 0000000000000200 R12: 0000000000000071 R13: ffff98059b940000 R14: ffff980d87f948a0 R15: 0000000000000000 FS: 00007f88deb31740(0000) GS:ffff98059f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000853e26001 CR4: 00000000001606e0 Call Trace: port_pkey_list_insert+0x3d/0x1b0 [ib_core] ? kmem_cache_alloc_trace+0x215/0x220 ib_security_modify_qp+0x226/0x3a0 [ib_core] _ib_modify_qp+0xcf/0x390 [ib_core] ipoib_init_qp+0x7f/0x200 [ib_ipoib] ? rvt_modify_port+0xd0/0xd0 [rdmavt] ? ib_find_pkey+0x99/0xf0 [ib_core] ipoib_ib_dev_open_default+0x1a/0x200 [ib_ipoib] ipoib_ib_dev_open+0x96/0x130 [ib_ipoib] ipoib_open+0x44/0x130 [ib_ipoib] __dev_open+0xd1/0x160 __dev_change_flags+0x1ab/0x1f0 dev_change_flags+0x23/0x60 do_setlink+0x328/0xe30 ? __nla_validate_parse+0x54/0x900 __rtnl_newlink+0x54e/0x810 ? __alloc_pages_nodemask+0x17d/0x320 ? page_fault+0x30/0x50 ? _cond_resched+0x15/0x30 ? kmem_cache_alloc_trace+0x1c8/0x220 rtnl_newlink+0x43/0x60 rtnetlink_rcv_msg+0x28f/0x350 ? kmem_cache_alloc+0x1fb/0x200 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x24d/0x2d0 ? rtnl_calcit.isra.31+0x120/0x120 netlink_rcv_skb+0xcb/0x100 netlink_unicast+0x1e0/0x340 netlink_sendmsg+0x317/0x480 ? __check_object_size+0x48/0x1d0 sock_sendmsg+0x65/0x80 ____sys_sendmsg+0x223/0x260 ? copy_msghdr_from_user+0xdc/0x140 ___sys_sendmsg+0x7c/0xc0 ? skb_dequeue+0x57/0x70 ? __inode_wait_for_writeback+0x75/0xe0 ? fsnotify_grab_connector+0x45/0x80 ? __dentry_kill+0x12c/0x180 __sys_sendmsg+0x58/0xa0 do_syscall_64+0x5b/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f88de467f10 Link: https://lore.kernel.org/r/20200227125728.100551-1-leon@kernel.org Cc: <stable@vger.kernel.org> Fixes: 1dd01788 ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list") Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 98c5f7d4 ] We are still experiencing some packet loss with the existing advanced congestion buffering (ACB) settings with the IMP port configured for 2Gb/sec, so revert to conservative link speeds that do not produce packet loss until this is resolved. Fixes: 8f1880cb ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec") Fixes: de34d708 ("net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hui Wang authored
[ Upstream commit c37c0ab0 ] Need to chain the THINKPAD_ACPI, otherwise the mute led will not work. Fixes: d2cd795c ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen") Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200219052306.24935-1-hui.wang@canonical.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Yazen Ghannam authored
[ Upstream commit 466503d6 ] The following commit introduced a warning on error reports without a non-zero grain value. 3724ace5 ("EDAC/mc: Fix grain_bits calculation") The amd64_edac_mod module does not provide a value, so the warning will be given on the first reported memory error. Set the grain per DIMM to cacheline size (64 bytes). This is the current recommendation. Fixes: 3724ace5 ("EDAC/mc: Fix grain_bits calculation") Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191022203448.13962-7-Yazen.Ghannam@amd.comSigned-off-by:
-
- 05 Mar, 2020 34 commits
-
-
Greg Kroah-Hartman authored
-
Paul Moore authored
[ Upstream commit 75612528 ] This patch ensures that we always check the netlink payload length in audit_receive_msg() before we take any action on the payload itself. Cc: stable@vger.kernel.org Reported-by: syzbot+399c44bf1f43b8747403@syzkaller.appspotmail.com Reported-by: syzbot+e4b12d8d202701f08b6d@syzkaller.appspotmail.com Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
David Rientjes authored
commit f42f2552 upstream. If thp defrag setting "defer" is used and a newline is *not* used when writing to the sysfs file, this is interpreted as the "defer+madvise" option. This is because we do prefix matching and if five characters are written without a newline, the current code ends up comparing to the first five bytes of the "defer+madvise" option and using that instead. Use the more appropriate sysfs_streq() that handles the trailing newline for us. Since this doubles as a nice cleanup, do it in enabled_store() as well. The current implementation relies on prefix matching: the number of bytes compared is either the number of bytes written or the length of the option being compared. With a newline, "defer\n" does not match "defer+"madvise"; without a newline, however, "defer" is considered to match "defer+madvise" (prefix matching is only comparing the first five bytes). End result is that writing "defer" is broken unless it has an additional trailing character. This means that writing "madv" in the past would match and set "madvise". With strict checking, that no longer is the case but it is unlikely anybody is currently doing this. Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2001171411020.56385@chino.kir.corp.google.com Fixes: 21440d7e ("mm, thp: add new defer+madvise defrag option") Signed-off-by:
David Rientjes <rientjes@google.com> Suggested-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wei Yang authored
commit cb829624 upstream. The page could be a tail page, if this is the case, this BUG_ON will never be triggered. Link: http://lkml.kernel.org/r/20200110032610.26499-1-richardw.yang@linux.intel.com Fixes: e9b61f19 ("thp: reintroduce split_huge_page()") Signed-off-by:
Wei Yang <richardw.yang@linux.intel.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Matteo Croce authored
commit 78e06cf4 upstream. In the flowtable documentation there is a missing semicolon, the command as is would give this error: nftables.conf:5:27-33: Error: syntax error, unexpected devices, expecting newline or semicolon hook ingress priority 0 devices = { br0, pppoe-data }; ^^^^^^^ nftables.conf:4:12-13: Error: invalid hook (null) flowtable ft { ^^ Fixes: 19b351f1 ("netfilter: add flowtable documentation") Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Xin Long authored
commit cf3e204a upstream. info->key.tp_src and tp_dst are __be16, when using nla_put_be16() to dump them, htons() is not needed, so remove it in this patch. Fixes: af308b94 ("netfilter: nf_tables: add tunnel support") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Florian Fainelli authored
commit e1ff6fc2 upstream. At the time the brcmstb_thermal driver and its binding were merged, the DT binding did not make the coefficients properties a mandatory one, therefore all users of the brcmstb_thermal driver out there have a non functional implementation with zero coefficients. Even if these properties were provided, the formula used for computation is incorrect. The coefficients are entirely process specific (right now, only 28nm is supported) and not board or SoC specific, it is therefore appropriate to hard code them in the driver given the compatibility string we are probed with which has to be updated whenever a new process is introduced. We remove the existing coefficients definition since subsequent patches are going to add support for a new process and will introduce new coefficients as well. Fixes: 9e03cf1b ("thermal: add brcmstb AVS TMON driver") Signed-off-by:
Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200114190607.29339-2-f.fainelli@gmail.comSigned-off-by:
-
Sean Christopherson authored
commit 208050da upstream. Remove a bogus clearing of apf.msr_val from kvm_arch_vcpu_destroy(). apf.msr_val is only set to a non-zero value by kvm_pv_enable_async_pf(), which is only reachable by kvm_set_msr_common(), i.e. by writing MSR_KVM_ASYNC_PF_EN. KVM does not autonomously write said MSR, i.e. can only be written via KVM_SET_MSRS or KVM_RUN. Since KVM_SET_MSRS and KVM_RUN are vcpu ioctls, they require a valid vcpu file descriptor. kvm_arch_vcpu_destroy() is only called if KVM_CREATE_VCPU fails, and KVM declares KVM_CREATE_VCPU successful once the vcpu fd is installed and thus visible to userspace. Ergo, apf.msr_val cannot be non-zero when kvm_arch_vcpu_destroy() is called. Fixes: 344d9588 ("KVM: Add PV MSR to enable asynchronous page faults delivery.") Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sean Christopherson authored
commit 9d979c7e upstream. x86 does not load its MMU until KVM_RUN, which cannot be invoked until after vCPU creation succeeds. Given that kvm_arch_vcpu_destroy() is called if and only if vCPU creation fails, it is impossible for the MMU to be loaded. Note, the bogus kvm_mmu_unload() call was added during an unrelated refactoring of vCPU allocation, i.e. was presumably added as an opportunstic "fix" for a perceived leak. Fixes: fb3f0f51 ("KVM: Dynamically allocate vcpus") Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 3f777403 upstream. We need to set actions->ms.map since 599a2f38 ("perf hists browser: Check sort keys before hot key actions"), as in that patch we bail out if map is NULL. Reviewed-by:
Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 599a2f38 ("perf hists browser: Check sort keys before hot key actions") Link: https://lkml.kernel.org/n/tip-wp1ssoewy6zihwwexqpohv0j@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Uwe Kleine-König authored
commit c7cb3a1d upstream. This was found by coccicheck: drivers/pwm/pwm-omap-dmtimer.c:304:2-8: ERROR: missing put_device; call of_find_device_by_node on line 255, but without a corresponding object release within this function. Reported-by:
Markus Elfring <elfring@users.sourceforge.net> Fixes: 6604c655 ("pwm: Add PWM driver for OMAP using dual-mode timers") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Masami Hiramatsu authored
commit f66c0447 upstream. Set the unoptimized flag after confirming the code is completely unoptimized. Without this fix, when a kprobe hits the intermediate modified instruction (the first byte is replaced by an INT3, but later bytes can still be a jump address operand) while unoptimizing, it can return to the middle byte of the modified code, which causes an invalid instruction exception in the kernel. Usually, this is a rare case, but if we put a probe on the function call while text patching, it always causes a kernel panic as below: # echo p text_poke+5 > kprobe_events # echo 1 > events/kprobes/enable # echo 0 > events/kprobes/enable invalid opcode: 0000 [#1] PREEMPT SMP PTI RIP: 0010:text_poke+0x9/0x50 Call Trace: arch_unoptimize_kprobe+0x22/0x28 arch_unoptimize_kprobes+0x39/0x87 kprobe_optimizer+0x6e/0x290 process_one_work+0x2a0/0x610 worker_thread+0x28/0x3d0 ? process_one_work+0x610/0x610 kthread+0x10d/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x3a/0x50 text_poke() is used for patching the code in optprobes. This can happen even if we blacklist text_poke() and other functions, because there is a small time window during which we show the intermediate code to other CPUs. [ mingo: Edited the changelog. ] Tested-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Christophe JAILLET authored
commit 5a44c71c upstream. 'alloc_etherdev_mqs()' expects first 'tx', then 'rx'. The semantic here looks reversed. Reorder the arguments passed to 'alloc_etherdev_mqs()' in order to keep the correct semantic. In fact, this is a no-op because both XGENE_NUM_[RT]X_RING are 8. Fixes: 107dec27 ("drivers: net: xgene: Add support for multiple queues") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Ravi Bangoria authored
commit 57ddf091 upstream. Commit 0aa802a7 ("perf stat: Get rid of extra clock display function") introduced scale and unit for clock events. Thus, perf_stat__update_shadow_stats() now saves scaled values of clock events in msecs, instead of original nsecs. But while calculating values of shadow stats we still consider clock event values in nsecs. This results in a wrong shadow stat values. Ex, # ./perf stat -e task-clock,cycles ls <SNIP> 2.60 msec task-clock:u # 0.877 CPUs utilized 2,430,564 cycles:u # 1215282.000 GHz Fix this by saving original nsec values for clock events in perf_stat__update_shadow_stats(). After patch: # ./perf stat -e task-clock,cycles ls <SNIP> 3.14 msec task-clock:u # 0.839 CPUs utilized 3,094,528 cycles:u # 0.985 GHz Suggested-by:
Jiri Olsa <jolsa@redhat.com> Reported-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by:
-
Ravi Bangoria authored
commit eb08d006 upstream. We already have function to check if a given event is either SW_CPU_CLOCK or SW_TASK_CLOCK. Utilize it. Signed-off-by:
-
Vincent Guittot authored
commit 039ae8bc upstream. This re-applies the commit reverted here: commit c40f7d74 ("sched/fair: Fix infinite loop in update_blocked_averages() by reverting a9e7f654") I.e. now that cfs_rq can be safely removed/added in the list, we can re-apply: commit a9e7f654 ("sched/fair: Fix O(nr_cgroups) in load balance path") Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: sargun@sargun.me Cc: tj@kernel.org Cc: xiexiuqi@huawei.com Cc: xiezhipeng1@huawei.com Link: https://lkml.kernel.org/r/1549469662-13614-3-git-send-email-vincent.guittot@linaro.orgSigned-off-by:
-
Vincent Guittot authored
commit 31bc6aea upstream. Removing a cfs_rq from rq->leaf_cfs_rq_list can break the parent/child ordering of the list when it will be added back. In order to remove an empty and fully decayed cfs_rq, we must remove its children too, so they will be added back in the right order next time. With a normal decay of PELT, a parent will be empty and fully decayed if all children are empty and fully decayed too. In such a case, we just have to ensure that the whole branch will be added when a new task is enqueued. This is default behavior since : commit f6783319 ("sched/fair: Fix insertion in rq->leaf_cfs_rq_list") In case of throttling, the PELT of throttled cfs_rq will not be updated whereas the parent will. This breaks the assumption made above unless we remove the children of a cfs_rq that is throttled. Then, they will be added back when unthrottled and a sched_entity will be enqueued. As throttled cfs_rq are now removed from the list, we can remove the associated test in update_blocked_averages(). Signed-off-by:
-
Sean Christopherson authored
commit fcfbc617 upstream. When reading/writing using the guest/host cache, check for a bad hva before checking for a NULL memslot, which triggers the slow path for handing cross-page accesses. Because the memslot is nullified on error by __kvm_gfn_to_hva_cache_init(), if the bad hva is encountered after crossing into a new page, then the kvm_{read,write}_guest() slow path could potentially write/access the first chunk prior to detecting the bad hva. Arguably, performing a partial access is semantically correct from an architectural perspective, but that behavior is certainly not intended. In the original implementation, memslot was not explicitly nullified and therefore the partial access behavior varied based on whether the memslot itself was null, or if the hva was simply bad. The current behavior was introduced as a seemingly unintentional side effect in commit f1b9dd5e ("kvm: Disallow wraparound in kvm_gfn_to_hva_cache_init"), which justified the change with "since some callers don't check the return code from this function, it sit seems prudent to clear ghc->memslot in the event of an error". Regardless of intent, the partial access is dependent on _not_ checking the result of the cache initialization, which is arguably a bug in its own right, at best simply weird. Fixes: 8f964525 ("KVM: Allow cross page reads and writes from cached translations.") Cc: Jim Mattson <jmattson@google.com> Cc: Andrew Honig <ahonig@google.com> Signed-off-by:
-
Tom Lendacky authored
commit 52918ed5 upstream. The KVM MMIO support uses bit 51 as the reserved bit to cause nested page faults when a guest performs MMIO. The AMD memory encryption support uses a CPUID function to define the encryption bit position. Given this, it is possible that these bits can conflict. Use svm_hardware_setup() to override the MMIO mask if memory encryption support is enabled. Various checks are performed to ensure that the mask is properly defined and rsvd_bits() is used to generate the new mask (as was done prior to the change that necessitated this patch). Fixes: 28a1f3ac ("kvm: x86: Set highest physical address bits in non-present/reserved SPTEs") Suggested-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Brian Norris authored
commit 1c9f329b upstream. Commit 7afb94da ("mwifiex: update set_mac_address logic") fixed the only user of this function, partly because the author seems to have noticed that, as written, it's on the borderline between highly misleading and buggy. Anyway, no sense in keeping dead code around: let's drop it. Fixes: 7afb94da ("mwifiex: update set_mac_address logic") Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Brian Norris authored
commit 70e5b8f4 upstream. Before commit 1e58252e ("mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame()"), mwifiex_process_tdls_action_frame() already had too many magic numbers. But this commit just added a ton more, in the name of checking for buffer overflows. That seems like a really bad idea. Let's make these magic numbers a little less magic, by (a) factoring out 'pos[1]' as 'ie_len' (b) using 'sizeof' on the appropriate source or destination fields where possible, instead of bare numbers (c) dropping redundant checks, per below. Regarding redundant checks: the beginning of the loop has this: if (pos + 2 + pos[1] > end) break; but then individual 'case's include stuff like this: if (pos > end - 3) return; if (pos[1] != 1) return; Note that the second 'return' (validating the length, pos[1]) combined with the above condition (ensuring 'pos + 2 + length' doesn't exceed 'end'), makes the first 'return' (whose 'if' can be reworded as 'pos > end - pos[1] - 2') redundant. Rather than unwind the magic numbers there, just drop those conditions. Fixes: 1e58252e ("mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame()") Signed-off-by:
-
Aleksa Sarai authored
commit 2b98149c upstream. It's over-zealous to return hard errors under RCU-walk here, given that a REF-walk will be triggered for all other cases handling ".." under RCU. The original purpose of this check was to ensure that if a rename occurs such that a directory is moved outside of the bind-mount which the resolution started in, it would be detected and blocked to avoid being able to mess with paths outside of the bind-mount. However, triggering a new REF-walk is just as effective a solution. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Fixes: 397d425d ("vfs: Test for and handle paths that are unreachable from their mnt_root") Suggested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Aleksa Sarai <cyphar@cyphar.com> Signed-off-by:
-
Arthur Kiyanovski authored
commit 470793a7 upstream. As the name suggests ETH_RSS_HASH_NO_CHANGE is received upon changing the key or indirection table using ethtool while keeping the same hash function. Also add a function for retrieving the current hash function from the ena-com layer. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
Saeed Bshara <saeedb@amazon.com> Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
Ursula Braun authored
commit 369537c9 upstream. Just SMCR requires a CLC Peer ID, but not SMCD. The field should be zero for SMCD. Fixes: c758dfdd ("net/smc: add SMC-D support in CLC messages") Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Pavel Belous authored
commit 380ec5b9 upstream. Code inspection found that in case of mapping error we do return current 'ret' value. But beside error, it is used to count number of descriptors allocated for the packet. In that case map_skb function could return '1'. Changing it to return zero (number of mapped descriptors for skb) Fixes: 018423e9 ("net: ethernet: aquantia: Add ring support code") Signed-off-by:
Pavel Belous <pbelous@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by:
-
Pavel Belous authored
commit a4980919 upstream. skb->len is used to calculate statistics after xmit invocation. Under a stress load it may happen that skb will be xmited, rx interrupt will come and skb will be freed, all before xmit function is even returned. Eventually, skb->len will access unallocated area. Moving stats calculation into tx_clean routine. Fixes: 018423e9 ("net: ethernet: aquantia: Add ring support code") Reported-by:
Christophe Vu-Brugier <cvubrugier@fastmail.fm> Signed-off-by:
-
Nikolay Aleksandrov authored
commit 3a20773b upstream. Since nl_groups is a u32 we can't bind more groups via ->bind (netlink_bind) call, but netlink has supported more groups via setsockopt() for a long time and thus nlk->ngroups could be over 32. Recently I added support for per-vlan notifications and increased the groups to 33 for NETLINK_ROUTE which exposed an old bug in the netlink_bind() code causing out-of-bounds access on archs where unsigned long is 32 bits via test_bit() on a local variable. Fix this by capping the maximum groups in netlink_bind() to BITS_PER_TYPE(u32), effectively capping them at 32 which is the minimum of allocated groups and the maximum groups which can be bound via netlink_bind(). CC: Christophe Leroy <christophe.leroy@c-s.fr> CC: Richard Guy Briggs <rgb@redhat.com> Fixes: 4f520900 ("netlink: have netlink per-protocol bind function return an error code.") Reported-by:
Erhard F. <erhard_f@mailbox.org> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Alexandra Winter authored
commit 6f3846f0 upstream. When getting or setting VNICC parameters, the error code EOPNOTSUPP should have precedence over EBUSY. EBUSY is used because vnicc feature and bridgeport feature are mutually exclusive, which is a temporary condition. Whereas EOPNOTSUPP indicates that the HW does not support all or parts of the vnicc feature. This issue causes the vnicc sysfs params to show 'blocked by bridgeport' for HW that does not support VNICC at all. Fixes: caa1f0b1 ("s390/qeth: add VNICC enable/disable support") Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Peter Chen authored
commit ca4b43c1 upstream. To work properly on every architectures and compilers, the enum value needs to be specific numbers. Suggested-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/1580537624-10179-1-git-send-email-peter.chen@nxp.comSigned-off-by:
-
Haiyang Zhang authored
commit f6f13c12 upstream. When netvsc_attach() is called by operations like changing MTU, etc., an extra wakeup may happen while netvsc_attach() calling rndis_filter_device_add() which sends rndis messages when queue is stopped in netvsc_detach(). The completion message will wake up queue 0. We can reproduce the issue by changing MTU etc., then the wake_queue counter from "ethtool -S" will increase beyond stop_queue counter: stop_queue: 0 wake_queue: 1 The issue causes queue wake up, and counter increment, no other ill effects in current code. So we didn't see any network problem for now. To fix this, initialize tx_disable to true, and set it to false when the NIC is ready to be attached or registered. Fixes: 7b2ee50c ("hv_netvsc: common detach logic") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Tina Zhang authored
commit 3eb55e6f upstream. ALL_ENGINES reset doesn't clobber display with the current gvt-g supported platforms. Thus ALL_ENGINES reset shouldn't reset the display engine registers emulated by gvt-g. This fixes guest warning like [ 14.622026] [drm] Initialized i915 1.6.0 20200114 for 0000:00:03.0 on minor 0 [ 14.967917] fbcon: i915drmfb (fb0) is primary device [ 25.100188] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] E RROR [CRTC:51:pipe A] flip_done timed out [ 25.100860] -----------[ cut here ]----------- [ 25.100861] pll on state mismatch (expected 0, found 1) [ 25.101024] WARNING: CPU: 1 PID: 30 at drivers/gpu/drm/i915/display/intel_dis play.c:14382 verify_single_dpll_state.isra.115+0x28f/0x320 [i915] [ 25.101025] Modules linked in: intel_rapl_msr intel_rapl_common kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i915 aesni_intel cr ypto_simd cryptd glue_helper cec rc_core video drm_kms_helper joydev drm input_l eds i2c_algo_bit serio_raw fb_sys_fops syscopyarea sysfillrect sysimgblt mac_hid qemu_fw_cfg sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 e1000 psmouse i2c_piix4 pata_acpi floppy [ 25.101052] CPU: 1 PID: 30 Comm: kworker/u4:1 Not tainted 5.5.0+ #1 [ 25.101053] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1 .12.1-0-ga5cab58 04/01/2014 [ 25.101055] Workqueue: events_unbound async_run_entry_fn [ 25.101092] RIP: 0010:verify_single_dpll_state.isra.115+0x28f/0x320 [i915] [ 25.101093] Code: e0 d9 ff e9 a3 fe ff ff 80 3d e9 c2 11 00 00 44 89 f6 48 c7 c7 c0 9d 88 c0 75 3b e8 eb df d9 ff e9 c7 fe ff ff e8 d1 e0 ae c4 <0f> 0b e9 7a fe ff ff 80 3d c0 c2 11 00 00 8d 71 41 89 c2 48 c7 c7 [ 25.101093] RSP: 0018:ffffb1de80107878 EFLAGS: 00010286 [ 25.101094] RAX: 0000000000000000 RBX: ffffb1de80107884 RCX: 0000000000000007 [ 25.101095] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff94fdfdd19740 [ 25.101095] RBP: ffffb1de80107938 R08: 0000000d6bfdc7b4 R09: 000000000000002b [ 25.101096] R10: ffff94fdf82dc000 R11: 0000000000000225 R12: 00000000000001f8 [ 25.101096] R13: ffff94fdb3ca6a90 R14: ffff94fdb3ca0000 R15: 0000000000000000 [ 25.101097] FS: 0000000000000000(0000) GS:ffff94fdfdd00000(0000) knlGS:00000 00000000000 [ 25.101098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.101098] CR2: 00007fbc3e2be9c8 CR3: 000000003339a003 CR4: 0000000000360ee0 [ 25.101101] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 25.101101] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 25.101102] Call Trace: [ 25.101139] intel_atomic_commit_tail+0xde4/0x1520 [i915] [ 25.101141] ? flush_workqueue_prep_pwqs+0xfa/0x130 [ 25.101142] ? flush_workqueue+0x198/0x3c0 [ 25.101174] intel_atomic_commit+0x2ad/0x320 [i915] [ 25.101209] drm_atomic_commit+0x4a/0x50 [drm] [ 25.101220] drm_client_modeset_commit_atomic+0x1c4/0x200 [drm] [ 25.101231] drm_client_modeset_commit_force+0x47/0x170 [drm] [ 25.101250] drm_fb_helper_restore_fbdev_mode_unlocked+0x4e/0xa0 [drm_kms_hel per] [ 25.101255] drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper] [ 25.101287] intel_fbdev_set_par+0x1a/0x40 [i915] [ 25.101289] ? con_is_visible+0x2e/0x60 [ 25.101290] fbcon_init+0x378/0x600 [ 25.101292] visual_init+0xd5/0x130 [ 25.101296] do_bind_con_driver+0x217/0x430 [ 25.101297] do_take_over_console+0x7d/0x1b0 [ 25.101298] do_fbcon_takeover+0x5c/0xb0 [ 25.101299] fbcon_fb_registered+0x199/0x1a0 [ 25.101301] register_framebuffer+0x22c/0x330 [ 25.101306] __drm_fb_helper_initial_config_and_unlock+0x31a/0x520 [drm_kms_h elper] [ 25.101311] drm_fb_helper_initial_config+0x35/0x40 [drm_kms_helper] [ 25.101341] intel_fbdev_initial_config+0x18/0x30 [i915] [ 25.101342] async_run_entry_fn+0x3c/0x150 [ 25.101343] process_one_work+0x1fd/0x3f0 [ 25.101344] worker_thread+0x34/0x410 [ 25.101346] kthread+0x121/0x140 [ 25.101346] ? process_one_work+0x3f0/0x3f0 [ 25.101347] ? kthread_park+0x90/0x90 [ 25.101350] ret_from_fork+0x35/0x40 [ 25.101351] --[ end trace b5b47d44cd998ba1 ]-- Fixes: 6294b61b ("drm/i915/gvt: add missing display part reset for vGPU reset") Signed-off-by:
Tina Zhang <tina.zhang@intel.com> Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Tina Zhang authored
commit b549c252 upstream. Deleting dmabuf item's list head after releasing its container can lead to KASAN-reported issue: BUG: KASAN: use-after-free in __list_del_entry_valid+0x15/0xf0 Read of size 8 at addr ffff88818a4598a8 by task kworker/u8:3/13119 So fix this issue by puting deleting dmabuf_objs ahead of releasing its container. Fixes: dfb6ae4e ("drm/i915/gvt: Handle orphan dmabuf_objs") Signed-off-by:
-
Wolfram Sang authored
commit 9e661ced upstream. The printout for txabrt is way too talkative and is highly annoying with scanning programs like 'i2cdetect'. Reduce it to the minimum, the rest can be gained by I2C core debugging and datasheet information. Also, make it a debug printout, it won't help the regular user. Fixes: ba92222e ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780") Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Tested-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 54498e80 upstream. Factor out 100 from the equation and do 32-bit arithmetic (3 * clk_mhz / 10) instead of 64-bit. Notice that clk_mhz is MHz, so the multiplication will never wrap 32 bits and there is no need for div_u64(). Addresses-Coverity: 1458369 ("Unintentional integer overflow") Fixes: 0560ad57 ("i2c: altera: Add Altera I2C Controller driver") Suggested-by:
David Laight <David.Laight@ACULAB.COM> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by:
-
