Replace "/sys/kernel/debug/habanalabs/hl<n>/..." with
"/sys/kernel/debug/accel/<n>/...".
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Replace "/sys/class/habanalabs/hl<n>/..." with
"/sys/class/accel/accel<n>/device/...".
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Register the compute device as an accel device, and remove the creation
of the habanalabs compute char device.

The IOCTLs in this patch are still handled by the current driver
handler. Moving to DRM IOCTL handling requires moving the IOCTLs
numbers to a specific range, so it will be handled in subsequent
patches.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

User gets notification for every engine error report, but he still
lacks the exact engine information. Hence, we allow user to query
for the exact engine reported an error.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

After being notified about certain errors, user is expected to finish
his post-errors actions and to release the device within some timeout,
after which is deice is being reset.
The default timeout value is 5 sec, which in some case is not enough for
a user application to collect debug data.
Increase the default value to 30 sec.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

It is possible for FW to request reserved space in dram.
If the device supports this option, it will retrieve the size from the
f/w and will reserve it.

Currently we add the common code infrastructure to support it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

If we are initializing the kernel context when we have a Gaudi2 device,
we don't need to do any late initializing of that context with
specific Gaudi2 code.
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The soft reset has transitioned to CPUCP packet instead of plain
register write and is about to be removed from the struct cpu_dyn_regs.
As a preparation for removing the gic_host_soft_rst_irq field from
struct cpu_dyn_regs, switch to use the plain macro - this keeps the
backward compatibility.
Signed-off-by: Igor Grinberg <igrinberg@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

As TPC kernels now must use those registers we unsecure them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The F/W dynamically allocates one of the PSOC scratchpad registers for
the engine cores, so they can raise events towards the F/W.
To allow the engine cores to access this register, this register must be
non-secured.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The module loads firmware so add MODULE_FIRMWARE macros to provide that
information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Now that the driver core allows for struct class to be in read-only
memory, move the accel_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.

Cc: dri-devel@lists.freedesktop.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Add dump of an error reported from f/w during boot time.
This error indicates a failure with setting temperature threshold.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

If scrubbing memory after user released device has failed it means
the device is in a bad state and should be reset.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>

Our simulator supports idle check so no need anymore to check if pdev
exists.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>

When the driver needs to abort waiters for interrupts, for cases
such as critical events that occur and driver need to do hard reset,
in such scenario the driver will complete the fence to wake up the
waiting thread, and will set the fence error indication.
The return value of the completion API will be greater than 0
since it will return the timeout, but as this indicates successful
completion, the driver should mark it as aborted.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Protect against concurrency of user requesting to register a timestamp
offset (where the driver fills the timestamp when the command submission
has finished executing) to a specific user interrupt ID. The
protection is basically to allow only one timestamp registration
request to be handled at a time.

This is needed because the user can decide to re-use a timestamp
offset (register an already registered offset, to a different
interrupt ID). This means the request will cause the timestamp node to
move from one interrupt list to another interrupt list. In such
scenario, without proper protection, we could end up adding the same
node twice to the interrupts wait lists.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Every time an FD is returned to the user, the driver adds
a corresponding private structure to the list.
Yet, it's still a list of private structures rather than of FDs.
Remove, as well, an unnecessary comment.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Because we might still be using related resources, decrementing PID's
reference count should be done at later stages of the device release.
A good place is right after the representing private structure is
removed from LKD's list.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

As part of driver teardown, we attempt to kill all user processes.
It shouldn't fail, but if it does we want to print the error code that
the kapi returned to us.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The preboot used to statically allocate memory for the comms descriptor
on the device memory when driver requested the descriptor information.
Now preboot moved to dynamic memory allocation where it wants to check
the size the driver expects vs. what the f/w expects.
Note there are no backward compatibility issues as older f/w versions
simply ignore this value.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Implement razwi handling for arc farm and add it to arc farm sei
event handler.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Because in this case we have only a single possible cause, we can
safely stop fetching the cause from firmware.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

hl_device_status() returns the status of an acquired device.
If a device is going down (following an rmmod cmd),
it should be marked as an unusable/malfunctioning device, and
hence should not be acquired.
However, since this was not the case so far (i.e., a device going
down would inaccurately return 'in reset' status allowing the user
to acquire the device) it introduced a bug where as part of a reset
flow, the driver could not kill processes that have not run yet, and
since those processes aren't blocked from reacquiring a device,
we get eventually a new flow of a driver attempting to kill all
processes in a list that can't be ever really empty.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

It is useful for debug to know which user process have acquired the
device.
Add this info to the relevant debug print, in addition to the already
printed user context's ASID.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

When an ioctl fails, it is useful to know what is the task command name
and the full ioctl request code, in addition to the task pid and the
ioctl number.
Add the additional information to the relevant debug error prints.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In order for user to be aware of undefined opcode events, we must
store all relevant information and notify user about the failure.
The user will fetch the stored info via info ioctl.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

If hl_device_cond_reset() is called while a reset is already pending but
hasn't started, the reset request will be dropped.
If the flags of the new request are more severe, e.g. a hard reset while
the pending reset is a compute reset, the eventual reset won't be
suitable for the device status.

To prevent such cases, update the pending reset flags with the new
requests flags before the requests are dropped.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

When a H/W event is received while a user is registered to events, no
immediate hard reset will happen, and instead the user will be notified
and will have some time to handle it and eventually release the
device, after which the reset will be done.
If a user, as part of the handling and as part of the cleanup steps
towards releasing the device, unregisters from receiving those events,
and at that time an adjacent H/W event is received, it will be assumed
that the user is not registered to events and thus an immediate hard
reset is required.

To prevent such an unwanted immediate reset, modify the driver to
perform it if the user is not registered to events AND we don't already
have a pending reset for a previous H/W event.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

drm/i915 feature pull for v6.7:

Features and functionality:
- Early Xe2 LPD / Lunarlake (LNL) display enabling (Lucas, Matt, Gustavo,
  Stanislav, Luca, Clint, Juha-Pekka, Balasubramani, Ravi)
- Plenty of various DSC improvements and fixes (Ankit)
- Add DSC PPS state readout and verification (Suraj)
- Improve fastsets for VRR, LRR and M/N updates (Ville)
- Use connector->ddc to create (non-DP MST) connector sysfs ddc symlinks (Ville)
- Various DSB improvements, load LUTs using DSB (Ville)
- Improve shared link bandwidth management, starting with FDI (Imre)
- Optimize get param ioctl for PXP status (Alan)
- Remove DG2 pre-production hardware workarounds (Matt)
- Add more RPL P/U PCI IDs (Dnyaneshwar)
- Add new DG2-G12 stepping (Swati)
- Add PSR sink error status to debugfs (Jouni)
- Add DP enhanced framing to crtc state checker (Ville)

Refactoring and cleanups:
- Simplify TileY/Tile4 tiling selftest enumeration (Matt)
- Remove some unused power domain code (Gustavo)
- Check stepping of display IP version rather than MTL platform (Matt)
- DP audio compute config cleanups (Vinod)
- SDVO cleanups and refactoring, more robust failure handling (Ville)
- Color register definition and readout cleanups (Jani)
- Reduce header interdependencies for frontbuffer tracking (Jani)
- Continue replacing struct edid with struct drm_edid (Jani)
- Use source physical address instead of EDID for CEC (Jani)
- Clean up Type-C port lane count functions (Luca)
- Clean up DSC PPS register definitions and readout (Jani)
- Stop using GEM_BUG_ON()/GEM_WARN_ON() in display code (Jani)
- Move more of the display probe to display code (Jani)
- Remove redundant runtime suspended state flag (Jouni)
- Move display info printing to display code (Balasubramani)
- Frontbuffer tracking improvements (Jouni)
- Add trailing newlines to debug logging (Jim Cromie)
- Separate display workarounds from clock gating init (Matt)
- Reduce dmesg log spamming for combo PHY, PLL state, FEC, DP MST (Ville, Imre)

Fixes:
- Fix hotplug poll detect loops via suspend/resume (Imre)
- Fix hotplug detect for forced connectors (Imre)
- Fix DSC first_line_bpg_offset calculation (Suraj)
- Fix debug prints for SDP CRC16 (Arun)
- Fix PXP runtime resume (Alan)
- Fix cx0 PHY lane handling (Gustavo)
- Fix frontbuffer tracking locking in debugfs (Juha-Pekka)
- Fix SDVO detect on some models (Ville)
- Fix SDP split configuration for DP MST (Vinod)
- Fix AUX usage and reads for HDCP on DP MST (Suraj)
- Fix PSR workaround (Jouni)
- Fix redundant AUX power get/put in DP force (Imre)
- Fix ICL DSI TCLK POST by letting hardware handle it (William)
- Fix IRQ reset for XE LP+ (Gustavo)
- Fix h/vsync_end instead of h/vtotal in VBT (Ville)
- Fix C20 PHY msgbus timeout issues (Gustavo)
- Fix pre-TGL FEC pipe A vs. DDI A mixup (Ville)
- Fix FEC state readout for DP MST (Ville)

DRM subsystem core changes:
- Assume sink supports 8 bpc when DSC is supported (Ankit)
- Add drm_edid_is_digital() helper (Jani)
- Parse source physical address from EDID (Jani)
- Add function to attach CEC without EDID (Jani)
- Reorder connector sysfs/debugfs remove (Ville)
- Register connector sysfs ddc symlink later (Ville)

Media subsystem changes:
- Add comments about CEC source physical address usage (Jani)

Merges:
- Backmerge drm-next to get v6.6-rc1 (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>

# Conflicts:
#	drivers/gpu/drm/i915/i915_drv.h
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87r0mhi7a6.fsf@intel.com

Merge tag 'drm-intel-gt-next-2023-09-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Driver Changes:

Fixes/improvements/new stuff:

- Fix TLB-Invalidation seqno store [mtl] (Alan Previn)
- Force a reset on internal GuC error [guc] (John Harrison)
- Define GSC fw [gsc] (Daniele Ceraolo Spurio)
- Update workaround 14016712196 [dg2/mtl] (Tejas Upadhyay)
- Mark requests for GuC virtual engines to avoid use-after-free (Andrzej Hajda)
- Add Wa_14015150844 [dg2/mtl] (Shekhar Chauhan)
- Prevent error pointer dereference (Dan Carpenter)
- Add Wa_18022495364 [tgl,adl,rpl] (Dnyaneshwar Bhadane)
- Fix GuC PMU by moving execlist stats initialization to execlist specific setup (Umesh Nerlige Ramappa)
- Fix PXP firmware load [pxp/mtl] (Alan Previn)
- Fix execution/context state of PXP contexts (Alan Previn)
- Limit the length of an sg list to the requested length (Matthew Wilcox)
- Fix reservation address in ggtt_reserve_guc_top [guc] (Javier Pello)
- Add Wa_18028616096 [dg2] (Shekhar Chauhan)
- Get runtime pm in busyness worker only if already active [guc/pmu] (Umesh Nerlige Ramappa)
- Don't set PIPE_CONTROL_FLUSH_L3 for aux inval (Nirmoy Das)

Future platform enablement:

- Fix and consolidate some workaround checks, make others IP version based [mtl] (Matt Roper)
- Replace Meteorlake subplatforms with IP version checks (Matt Roper)
- Adding DeviceID for Arrowlake-S under MTL [mtl] (Nemesa Garg)
- Run relevant bits of debugfs drop_caches per GT (Tvrtko Ursulin)

Miscellaneous:

- Remove Wa_15010599737 [dg2] (Shekhar Chauhan)
- Align igt_spinner_create_request with hangcheck [selftests] (Jonathan Cavitt)
- Remove pre-production workarounds [dg2] (Matt Roper)
- Tidy some workaround definitions (Matt Roper)
- Wait longer for tasks in migrate selftest [gt] (Jonathan Cavitt)
- Skip WA verification for GEN7_MISCCPCTL on DG2 [gt] (Andrzej Hajda)
- Silence injected failure in the load via GSC path [huc] (Daniele Ceraolo Spurio)
- Refactor deprecated strncpy (Justin Stitt)
- Update RC6 mask for mtl_drpc [debugfs/mtl] (Badal Nilawar)
- Remove a static inline that requires including i915_drv.h [gt] (Jani Nikula)
- Remove inlines from i915_gem_execbuffer.c [gem] (Jani Nikula)
- Remove gtt_offset from stream->oa_buffer.head/.tail [perf] (Ashutosh Dixit)
- Do not disable preemption for resets (Tvrtko Ursulin)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZRVzL02VFuwIkcGl@tursulin-desk

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

i915_gem_object_set_frontbuffer returns set frontbuffer pointer.  When we
are releasing frontbuffer we are clearing the pointer from the object. Warn
on if return value is not null.

v3: Check i915_gem_object_set_frontbuffer return value separately
v2: Instead of ignoring do drm_WARN_ON

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230928082924.164720-1-jouni.hogander@intel.com

drm-misc-next for v6.7-rc1:

UAPI Changes:
- drm_file owner is now updated during use, in the case of a drm fd
  opened by the display server for a client, the correct owner is
  displayed.
- Qaic gains support for the QAIC_DETACH_SLICE_BO ioctl to allow bo
  recycling.

Cross-subsystem Changes:
- Disable boot logo for au1200fb, mmpfb and unexport logo helpers.
  Only fbcon should manage display of logo.
- Update freescale in MAINTAINERS.
- Add some bridge files to bridge in MAINTAINERS.
- Update gma500 driver repo in MAINTAINERS to point to drm-misc.

Core Changes:
- Move size computations to drm buddy allocator.
- Make drm_atomic_helper_shutdown(NULL) a nop.
- Assorted small fixes in drm_debugfs, DP-MST payload addition error handling.
- Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR handling.
- Handle bad (h/v)sync_end in EDID by clipping to htotal.
- Build GPUVM as a module.

Driver Changes:
- Simple drivers don't need to cache prepared result.
- Call drm_atomic_helper_shutdown() in shutdown/unbind for a whole lot
  more drm drivers.
- Assorted small fixes in amdgpu, ssd130x, bridge/it6621, accel/qaic,
  nouveau, tc358768.
- Add NV12 for komeda writeback.
- Add arbitration lost event to synopsis/dw-hdmi-cec.
- Speed up s/r in nouveau by not restoring some big bo's.
- Assorted nouveau display rework in preparation for GSP-RM,
  especially related to how the modeset sequence works and
  the DP sequence in relation to link training.
- Update anx7816 panel.
- Support NVSYNC and NHSYNC in tegra.
- Allow multiple power domains in simple driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f1fae5eb-25b8-192a-9a53-215e1184ce81@linux.intel.com

Recompute the state of all CRTCs on an FDI link during a modeset that
may be affected by the modeset of other CRTCs on the same link. This
ensures that each CRTC on the link maximizes its BW use (after another
CRTC is disabled).

In practice this means recomputing pipe B's config on IVB if pipe C gets
disabled.

v2:
- Add the change recomputing affected CRTC states in a separate patch.
  (Ville)
v3: (Ville)
- Constify old and new crtc states.
- Check for fused off pipe C.
- Fix new vs. old crtc state mixup.
- Drop check for pipe C's enabled state.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-12-imre.deak@intel.com

At the moment modesetting pipe C on IVB will fail if pipe B uses 4 FDI
lanes. Make the BW sharing more dynamic by trying to reduce pipe B's
link bpp in this case, until pipe B uses only up to 2 FDI lanes.

For this instead of the encoder compute config retry loop - which
reduced link bpp only for the encoder's pipe - reduce the maximum link
bpp for pipe B/C as required after all CRTC states are computed and
recompute the CRTC states with the new bpp limit.

Atm, all FDI encoder's compute config function returns an error if a BW
constrain prevents increasing the pipe bpp value. The corresponding
crtc_state->bw_constrained check can be replaced with checking
crtc_state->max_link_bpp_x16, add TODO comments for this. SDVO is an
exception where this case is only handled in the outer config retry
loop, failing the modeset with a WARN, add a FIXME comment to handle
this in the encoder code similarly to other encoders.

v2:
- Don't assume that a CRTC is already in the atomic state, while
  reducing its link bpp.
- Add DocBook description to intel_fdi_atomic_check_link().
v3:
- Enable BW management for FDI links in a separate patch. (Ville)
v4: (Ville)
- Fail the SDVO encoder config computation if it doesn't support the
  link bpp limit.
- Add TODO: comments about checking link_bpp_x16 instead of
  bw_constrained.
v5:
- Replace link bpp limit check with a FIXME: comment in
  intel_sdvo_compute_config(). (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Amended commit message wrt. changes in v5]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-11-imre.deak@intel.com

At the moment a modeset fails if the config computation of a pipe can't
fit its required BW to the available link BW even though the limitation
may be resolved by reducing the BW requirement of other pipes.

To improve the above this patch adds helper functions checking the
overall BW limits after all CRTC states have been computed. If the check
fails the maximum link bpp for a selected pipe will be reduced and all
the CRTC states will be recomputed until either the overall BW limit
check passes, or further bpp reduction is not possible (because all
pipes/encoders sharing the link BW reached their minimum link bpp).

Atm, the MST encoder allocates twice the required BW for YUV420 format
streams. A follow-up patchset will fix that, add a code comment about
this.

This change prepares for upcoming patches enabling the above BW
management on FDI and MST links.

v2:
- Rename intel_crtc_state::max_link_bpp to max_link_bpp_x16 and
  intel_link_bw_limits::max_bpp to max_bpp_x16. (Jani)
v3:
- Add the helper functions in a separate patch. (Ville)
- Add the functions to intel_link_bw.c instead of intel_atomic.c (Ville)
- Return -ENOSPC instead of -EINVAL to userspace in case of a link BW
  limit failure.
v4:
- Make intel_atomic_check_config() static.
v5: (Ville)
- Rename intel_link_bw_limits::min_bpp_pipes to min_bpp_reached_pipes
  and intel_link_bw_reset_pipe_limit_to_min() to
  intel_link_bw_set_min_bpp_for_pipe().
- Rename pipe_bpp to link_bpp in intel_link_bw_reduce_bpp().
- Add FIXME: comment about MST encoder's YUV420 BW allocation and
  tracking the link bpp limit accordingly.
v6:
- Move intel_link_bw_compute_pipe_bpp() to intel_fdi.c (Ville)
- WARN_ON(BIT(pipe) & min_bpp_reached_pipes) in
  intel_link_bw_set_bpp_limit_for_pipe(). (Ville)
- Rename intel_link_bw_set_min_bpp_for_pipe() to
  intel_link_bw_set_bpp_limit_for_pipe() and
  intel_link_bw_limits::min_bpp_reached_pipes to
  bpp_limit_reached_pipes. (Ville)
- Remove unused header includes.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-10-imre.deak@intel.com

Factor out intel_atomic_check_config() to check and compute all the CRTC
states. This will be used by a follow up patch to recompute/check the
state until required by BW limitations between CRTCs.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-9-imre.deak@intel.com

Rename intel_modeset_all_pipes() to intel_modeset_all_pipes_late() to
clarify when the function can be called (vs.
intel_modeset_pipes_in_mask_early()).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-8-imre.deak@intel.com

Add intel_modeset_pipes_in_mask_early() to modeset a provided set of
pipes, used in a follow-up patch.

As opposed to intel_modeset_all_pipes() which modesets only the active
pipes - others don't requiring programming the HW - modeset all enabled
pipes in intel_modeset_pipes_in_mask_early() which may need to recompute
their state even if they are not active (that is in the DPMS off state).

While at it add DocBook descriptions for the two exported functions.

v2:
- Add a flag controlling if active planes are force updated as well.
- Add DockBook descriptions.
v3:
- For clarity use _early/_late suffixes for the exported functions
  instead of the update_active_planes parameter. (Ville)
v4:
- In intel_modeset_pipes_in_mask_early() update only the crtc
  flags relevant to the early phase. (Ville)
- Rename intel_modeset_all_pipes() in a separate patch.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-7-imre.deak@intel.com