BPF kfuncs are meant to be called from BPF programs. Accordingly, most
kfuncs are not called from anywhere in the kernel, which the
-Wmissing-prototypes warning is unhappy about. We've peppered
__diag_ignore_all("-Wmissing-prototypes", ... everywhere kfuncs are
defined in the codebase to suppress this warning.

This patch adds two macros meant to bound one or many kfunc definitions.
All existing kfunc definitions which use these __diag calls to suppress
-Wmissing-prototypes are migrated to use the newly-introduced macros.
A new __diag_ignore_all - for "-Wmissing-declarations" - is added to the
__bpf_kfunc_start_defs macro based on feedback from Andrii on an earlier
version of this patch [0] and another recent mailing list thread [1].

In the future we might need to ignore different warnings or do other
kfunc-specific things. This change will make it easier to make such
modifications for all kfunc defs.

  [0]: https://lore.kernel.org/bpf/CAEf4BzaE5dRWtK6RPLnjTW-MW9sx9K3Fn6uwqCTChK2Dcb1Xig@mail.gmail.com/
  [1]: https://lore.kernel.org/bpf/ZT+2qCc%2FaXep0%2FLf@krava/Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231031215625.2343848-1-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Currently this tests tries to umount /sys/kernel/debug (TDIR) but the
system it is running on may have mounts below.

For example, danobi/vmtest [0] VMs have
    mount -t tracefs tracefs /sys/kernel/debug/tracing
as part of their init.

This change instead creates a "random" directory under /tmp and uses this
as TDIR.
If the directory already exists, ignore the error and keep moving on.

Test:

Originally:

    $ vmtest -k $KERNEL_REPO/arch/x86_64/boot/bzImage "./test_progs -vv -a test_bpffs"
    => bzImage
    ===> Booting
    ===> Setting up VM
    ===> Running command
    [    2.138818] bpf_testmod: loading out-of-tree module taints kernel.
    [    2.140913] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
    bpf_testmod.ko is already unloaded.
    Loading bpf_testmod.ko...
    Successfully loaded bpf_testmod.ko.
    test_test_bpffs:PASS:clone 0 nsec
    fn:PASS:unshare 0 nsec
    fn:PASS:mount / 0 nsec
    fn:FAIL:umount /sys/kernel/debug unexpected error: -1 (errno 16)
    bpf_testmod.ko is already unloaded.
    Loading bpf_testmod.ko...
    Successfully loaded bpf_testmod.ko.
    test_test_bpffs:PASS:clone 0 nsec
    test_test_bpffs:PASS:waitpid 0 nsec
    test_test_bpffs:FAIL:bpffs test  failed 255#282     test_bpffs:FAIL
    Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
    Successfully unloaded bpf_testmod.ko.
    Command failed with exit code: 1

After this change:

    $ vmtest -k $(make image_name) 'cd tools/testing/selftests/bpf && ./test_progs -vv -a test_bpffs'
    => bzImage
    ===> Booting
    ===> Setting up VM
    ===> Running command
    [    2.295696] bpf_testmod: loading out-of-tree module taints kernel.
    [    2.296468] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
    bpf_testmod.ko is already unloaded.
    Loading bpf_testmod.ko...
    Successfully loaded bpf_testmod.ko.
    test_test_bpffs:PASS:clone 0 nsec
    fn:PASS:unshare 0 nsec
    fn:PASS:mount / 0 nsec
    fn:PASS:mount tmpfs 0 nsec
    fn:PASS:mkdir /tmp/test_bpffs_testdir/fs1 0 nsec
    fn:PASS:mkdir /tmp/test_bpffs_testdir/fs2 0 nsec
    fn:PASS:mount bpffs /tmp/test_bpffs_testdir/fs1 0 nsec
    fn:PASS:mount bpffs /tmp/test_bpffs_testdir/fs2 0 nsec
    fn:PASS:reading /tmp/test_bpffs_testdir/fs1/maps.debug 0 nsec
    fn:PASS:reading /tmp/test_bpffs_testdir/fs2/progs.debug 0 nsec
    fn:PASS:creating /tmp/test_bpffs_testdir/fs1/a 0 nsec
    fn:PASS:creating /tmp/test_bpffs_testdir/fs1/a/1 0 nsec
    fn:PASS:creating /tmp/test_bpffs_testdir/fs1/b 0 nsec
    fn:PASS:create_map(ARRAY) 0 nsec
    fn:PASS:pin map 0 nsec
    fn:PASS:stat(/tmp/test_bpffs_testdir/fs1/a) 0 nsec
    fn:PASS:renameat2(/fs1/a, /fs1/b, RENAME_EXCHANGE) 0 nsec
    fn:PASS:stat(/tmp/test_bpffs_testdir/fs1/b) 0 nsec
    fn:PASS:b should have a's inode 0 nsec
    fn:PASS:access(/tmp/test_bpffs_testdir/fs1/b/1) 0 nsec
    fn:PASS:stat(/tmp/test_bpffs_testdir/fs1/map) 0 nsec
    fn:PASS:renameat2(/fs1/c, /fs1/b, RENAME_EXCHANGE) 0 nsec
    fn:PASS:stat(/tmp/test_bpffs_testdir/fs1/b) 0 nsec
    fn:PASS:b should have c's inode 0 nsec
    fn:PASS:access(/tmp/test_bpffs_testdir/fs1/c/1) 0 nsec
    fn:PASS:renameat2(RENAME_NOREPLACE) 0 nsec
    fn:PASS:access(/tmp/test_bpffs_testdir/fs1/b) 0 nsec
    bpf_testmod.ko is already unloaded.
    Loading bpf_testmod.ko...
    Successfully loaded bpf_testmod.ko.
    test_test_bpffs:PASS:clone 0 nsec
    test_test_bpffs:PASS:waitpid 0 nsec
    test_test_bpffs:PASS:bpffs test  0 nsec
    #282     test_bpffs:OK
    Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
    Successfully unloaded bpf_testmod.ko.

[0] https://github.com/danobi/vmtest

This is a follow-up of https://lore.kernel.org/bpf/20231024201852.1512720-1-chantr4@gmail.com/T/

v1 -> v2:
  - use a TDIR name that is related to test
  - use C-style comments
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20231031223606.2927976-1-chantr4@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Hao Sun says:

====================
bpf: Fix incorrect immediate spill

Immediate is incorrectly cast to u32 before being spilled, losing sign
information. The range information is incorrect after load again. Fix
immediate spill by remove the cast. The second patch add a test case
for this.
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
---
Changes in v3:
- Change the expected log to fix the test case
- Link to v2: https://lore.kernel.org/r/20231101-fix-check-stack-write-v2-0-cb7c17b869b0@gmail.com

Changes in v2:
- Add fix and cc tags.
- Link to v1: https://lore.kernel.org/r/20231026-fix-check-stack-write-v1-0-6b325ef3ce7e@gmail.com

---
====================

Link: https://lore.kernel.org/r/20231101-fix-check-stack-write-v3-0-f05c2b1473d5@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add a test to check if the verifier correctly reason about the sign
of an immediate spilled to stack by BPF_ST instruction.
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Link: https://lore.kernel.org/r/20231101-fix-check-stack-write-v3-2-f05c2b1473d5@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

In check_stack_write_fixed_off(), imm value is cast to u32 before being
spilled to the stack. Therefore, the sign information is lost, and the
range information is incorrect when load from the stack again.

For the following prog:
0: r2 = r10
1: *(u64*)(r2 -40) = -44
2: r0 = *(u64*)(r2 - 40)
3: if r0 s<= 0xa goto +2
4: r0 = 1
5: exit
6: r0  = 0
7: exit

The verifier gives:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (bf) r2 = r10                      ; R2_w=fp0 R10=fp0
1: (7a) *(u64 *)(r2 -40) = -44        ; R2_w=fp0 fp-40_w=4294967252
2: (79) r0 = *(u64 *)(r2 -40)         ; R0_w=4294967252 R2_w=fp0
fp-40_w=4294967252
3: (c5) if r0 s< 0xa goto pc+2
mark_precise: frame0: last_idx 3 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r0 stack= before 2: (79) r0 = *(u64 *)(r2 -40)
3: R0_w=4294967252
4: (b7) r0 = 1                        ; R0_w=1
5: (95) exit
verification time 7971 usec
stack depth 40
processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0

So remove the incorrect cast, since imm field is declared as s32, and
__mark_reg_known() takes u64, so imm would be correctly sign extended
by compiler.

Fixes: ecdf985d ("bpf: track immediate values written to stack by BPF_ST instruction")
Cc: stable@vger.kernel.org
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231101-fix-check-stack-write-v3-1-f05c2b1473d5@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Our MPTCP CI complained [1] -- and KBuild too -- that it was no longer
possible to build the kernel without CONFIG_CGROUPS:

  kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_new':
  kernel/bpf/task_iter.c:919:14: error: 'CSS_TASK_ITER_PROCS' undeclared (first use in this function)
    919 |         case CSS_TASK_ITER_PROCS | CSS_TASK_ITER_THREADED:
        |              ^~~~~~~~~~~~~~~~~~~
  kernel/bpf/task_iter.c:919:14: note: each undeclared identifier is reported only once for each function it appears in
  kernel/bpf/task_iter.c:919:36: error: 'CSS_TASK_ITER_THREADED' undeclared (first use in this function)
    919 |         case CSS_TASK_ITER_PROCS | CSS_TASK_ITER_THREADED:
        |                                    ^~~~~~~~~~~~~~~~~~~~~~
  kernel/bpf/task_iter.c:927:60: error: invalid application of 'sizeof' to incomplete type 'struct css_task_iter'
    927 |         kit->css_it = bpf_mem_alloc(&bpf_global_ma, sizeof(struct css_task_iter));
        |                                                            ^~~~~~
  kernel/bpf/task_iter.c:930:9: error: implicit declaration of function 'css_task_iter_start'; did you mean 'task_seq_start'? [-Werror=implicit-function-declaration]
    930 |         css_task_iter_start(css, flags, kit->css_it);
        |         ^~~~~~~~~~~~~~~~~~~
        |         task_seq_start
  kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_next':
  kernel/bpf/task_iter.c:940:16: error: implicit declaration of function 'css_task_iter_next'; did you mean 'class_dev_iter_next'? [-Werror=implicit-function-declaration]
    940 |         return css_task_iter_next(kit->css_it);
        |                ^~~~~~~~~~~~~~~~~~
        |                class_dev_iter_next
  kernel/bpf/task_iter.c:940:16: error: returning 'int' from a function with return type 'struct task_struct *' makes pointer from integer without a cast [-Werror=int-conversion]
    940 |         return css_task_iter_next(kit->css_it);
        |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_destroy':
  kernel/bpf/task_iter.c:949:9: error: implicit declaration of function 'css_task_iter_end' [-Werror=implicit-function-declaration]
    949 |         css_task_iter_end(kit->css_it);
        |         ^~~~~~~~~~~~~~~~~

This patch simply surrounds with a #ifdef the new code requiring CGroups
support. It seems enough for the compiler and this is similar to
bpf_iter_css_{new,next,destroy}() functions where no other #ifdef have
been added in kernel/bpf/helpers.c and in the selftests.

Fixes: 9c66dc94 ("bpf: Introduce css_task open-coded iterator kfuncs")
Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/6665206927Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310260528.aHWgVFqq-lkp@intel.com/Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
[ added missing ifdefs for BTF_ID cgroup definitions ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20231101181601.1493271-1-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

I often regenerate all YNL files in the tree to make sure they
are in sync with the codegen and specs. Generator rewrites
the files unconditionally, so since make looks at file modification
time to decide what to rebuild - my next build takes longer.

We already generate the code to a tempfile most of the time,
only overwrite the target when we have to.

Before:

  $ stat include/uapi/linux/netdev.h
    File: include/uapi/linux/netdev.h
    Size: 2307      	Blocks: 8          IO Block: 4096   regular file
  Access: 2023-10-27 15:19:56.347071940 -0700
  Modify: 2023-10-27 15:19:45.089000900 -0700
  Change: 2023-10-27 15:19:45.089000900 -0700
   Birth: 2023-10-27 15:19:45.088000894 -0700

  $ ./tools/net/ynl/ynl-regen.sh -f
  [...]

  $ stat include/uapi/linux/netdev.h
    File: include/uapi/linux/netdev.h
    Size: 2307      	Blocks: 8          IO Block: 4096   regular file
  Access: 2023-10-27 15:19:56.347071940 -0700
  Modify: 2023-10-27 15:22:18.417968446 -0700
  Change: 2023-10-27 15:22:18.417968446 -0700
   Birth: 2023-10-27 15:19:45.088000894 -0700

After:

  $ stat include/uapi/linux/netdev.h
    File: include/uapi/linux/netdev.h
    Size: 2307      	Blocks: 8          IO Block: 4096   regular file
  Access: 2023-10-27 15:22:41.520114221 -0700
  Modify: 2023-10-27 15:22:18.417968446 -0700
  Change: 2023-10-27 15:22:18.417968446 -0700
   Birth: 2023-10-27 15:19:45.088000894 -0700

  $ ./tools/net/ynl/ynl-regen.sh -f
  [...]

  $ stat include/uapi/linux/netdev.h
    File: include/uapi/linux/netdev.h
    Size: 2307      	Blocks: 8          IO Block: 4096   regular file
  Access: 2023-10-27 15:22:41.520114221 -0700
  Modify: 2023-10-27 15:22:18.417968446 -0700
  Change: 2023-10-27 15:22:18.417968446 -0700
   Birth: 2023-10-27 15:19:45.088000894 -0700
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231027223408.1865704-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add two enum values that the blamed commit omitted.

Fixes: f2f9dd16 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231030161750.110420-1-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Andrew Lunn says:

====================
Add missing MODULE_DESCRIPTIONS

Fixup PHY and MDIO drivers which are missing MODULE_DESCRIPTION.
====================

Link: https://lore.kernel.org/r/20231028184458.99448-1-andrew@lunn.chSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if a module is built without a
MODULE_DESCRIPTION(). Fill them in based on the Kconfig text, or
similar.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20231028184458.99448-3-andrew@lunn.chSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if a module is built without a
MODULE_DESCRIPTION(). Fill them in based on the Kconfig text, or
similar.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231028184458.99448-2-andrew@lunn.chSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Victor Nogueira says:

====================
net: sched: Fill in missing MODULE_DESCRIPTIONs for net/sched

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().

Fill in the missing MODULE_DESCRIPTIONs for net/sched
====================

Link: https://lore.kernel.org/r/20231027155045.46291-1-victor@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().

Fill in missing MODULE_DESCRIPTIONs for TC qdiscs.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20231027155045.46291-4-victor@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().

Fill in missing MODULE_DESCRIPTIONs for TC classifiers.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20231027155045.46291-3-victor@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().

Gate is the only TC action that is lacking such description.
Fill MODULE_DESCRIPTION for Gate TC ACTION.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20231027155045.46291-2-victor@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull more networking updates from Jakub Kicinski:

 - Support GRO decapsulation for IPsec ESP in UDP

 - Add a handful of MODULE_DESCRIPTION()s

 - Drop questionable alignment check in TCP AO to avoid
   build issue after changes in the crypto tree

* tag 'net-next-6.7-followup' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next:
  net: tcp: remove call to obsolete crypto_ahash_alignmask()
  net: fill in MODULE_DESCRIPTION()s under drivers/net/
  net: fill in MODULE_DESCRIPTION()s under net/802*
  net: fill in MODULE_DESCRIPTION()s under net/core
  net: fill in MODULE_DESCRIPTION()s in kuba@'s modules
  xfrm: policy: fix layer 4 flowi decoding
  xfrm Fix use after free in __xfrm6_udp_encap_rcv.
  xfrm: policy: replace session decode with flow dissector
  xfrm: move mark and oif flowi decode into common code
  xfrm: pass struct net to xfrm_decode_session wrappers
  xfrm: Support GRO for IPv6 ESP in UDP encapsulation
  xfrm: Support GRO for IPv4 ESP in UDP encapsulation
  xfrm: Use the XFRM_GRO to indicate a GRO call on input
  xfrm: Annotate struct xfrm_sec_ctx with __counted_by
  xfrm: Remove unused function declarations

Pull probes updates from Masami Hiramatsu:
 "Cleanups:

   - kprobes: Fixes typo in kprobes samples

   - tracing/eprobes: Remove 'break' after return

  kretprobe/fprobe performance improvements:

   - lib: Introduce new `objpool`, which is a high performance lockless
     object queue. This uses per-cpu ring array to allocate/release
     objects from the pre-allocated object pool.

     Since the index of ring array is a 32bit sequential counter, we can
     retry to push/pop the object pointer from the ring without lock (as
     seq-lock does)

   - lib: Add an objpool test module to test the functionality and
     evaluate the performance under some circumstances

   - kprobes/fprobe: Improve kretprobe and rethook scalability
     performance with objpool.

     This improves both legacy kretprobe and fprobe exit handler (which
     is based on rethook) to be scalable on SMP systems. Even with
     8-threads parallel test, it shows a great scalability improvement

   - Remove unneeded freelist.h which is replaced by objpool

   - objpool: Add maintainers entry for the objpool

   - objpool: Fix to remove unused include header lines"

* tag 'probes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kprobes: unused header files removed
  MAINTAINERS: objpool added
  kprobes: freelist.h removed
  kprobes: kretprobe scalability improvement
  lib: objpool test module added
  lib: objpool added: ring-array based lockless MPMC
  tracing/eprobe: drop unneeded breaks
  samples: kprobes: Fixes a typo

Pull bootconfig updates from Masami Hiramatsu:

 - Documentation update for /proc/cmdline, which includes both the
   parameters from bootloader and the embedded parameters in the kernel

 - fs/proc: Add bootloader argument as a comment line to
   /proc/bootconfig so that the user can distinguish what parameters
   were passed from bootloader even if bootconfig modified that

 - Documentation fix to add /proc/bootconfig to proc.rst

* tag 'bootconfig-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  doc: Add /proc/bootconfig to proc.rst
  fs/proc: Add boot loader arguments as comment to /proc/bootconfig
  doc: Update /proc/cmdline documentation to include boot config

Pull ia64 removal and asm-generic updates from Arnd Bergmann:

 - The ia64 architecture gets its well-earned retirement as planned,
   now that there is one last (mostly) working release that will be
   maintained as an LTS kernel.

 - The architecture specific system call tables are updated for the
   added map_shadow_stack() syscall and to remove references to the
   long-gone sys_lookup_dcookie() syscall.

* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  hexagon: Remove unusable symbols from the ptrace.h uapi
  asm-generic: Fix spelling of architecture
  arch: Reserve map_shadow_stack() syscall number for all architectures
  syscalls: Cleanup references to sys_lookup_dcookie()
  Documentation: Drop or replace remaining mentions of IA64
  lib/raid6: Drop IA64 support
  Documentation: Drop IA64 from feature descriptions
  kernel: Drop IA64 support from sig_fault handlers
  arch: Remove Itanium (IA-64) architecture

Pull ARM SoC code updates from Arnd Bergmann:
 "The AMD Pensando DPU platform gets added to arm64, and some minor
  updates make it into Renesas' 32-bit platforms"

* tag 'soc-arm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm: debug: reuse the config DEBUG_OMAP2UART{1,2} for OMAP{3,4,5}
  arm64: Add config for AMD Pensando SoC platforms
  MAINTAINERS: Add entry for AMD PENSANDO
  ARM: shmobile: sh73a0: Reserve boot area when SMP is enabled
  ARM: shmobile: r8a7779: Reserve boot area when SMP is enabled
  ARM: shmobile: rcar-gen2: Reserve boot area when SMP is enabled
  ARM: shmobile: rcar-gen2: Remove unneeded once handling

Pull ARM defconfig updates from Arnd Bergmann:
 "These are the usual trivial changes to enable a couple of newly added
  device drivers and remove lines for Kconfig options that are no longer
  needed"

* tag 'soc-defconfig-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: defconfig: enable DisplayPort altmode support
  arm64: defconfig: enable CONFIG_TYPEC_QCOM_PMIC
  arm64: defconfig: add various drivers for Amlogic based boards
  ARM: config: aspeed: Remove FIRMWARE_MEMMAP
  ARM: config: aspeed_g5: Enable SSIF BMC driver
  ARM: config: aspeed: Add Ampere SMPro drivers
  ARM: config: aspeed: Add new FSI drivers
  arm64: defconfig: Enable TPS6593 PMIC for SK-AM62A
  ARM: exynos_defconfig: add driver for ISL29018
  ARM: multi_v7_defconfig: add drivers for S5C73M3 & S5K6A3 camera sensors
  arm64: defconfig: Enable RZ/G3S (R9A08G045) SoC
  ARM: multi_v7_defconfig: add tm2-touchkey driver
  ARM: exynos_defconfig: replace SATA_AHCI_PLATFORM with AHCI_DWC driver
  ARM: multi_v7_defconfig: add AHCI_DWC driver
  ARM: multi_v7_defconfig: make Exynos related PHYs modules
  ARM: s5pv210_defconfig: enable IIO required by MAX17040
  ARM: shmobile: defconfig: Refresh for v6.6-rc3
  ARM: defconfig: cleanup orphaned CONFIGs
  arm64: defconfig: Enable Samsung DSIM driver
  arm64: defconfig: Enable CONFIG_USB_MASS_STORAGE
  ...

Pull SoC driver updates from Arnd Bergmann:
 "The highlights for the driver support this time are

   - Qualcomm platforms gain support for the Qualcomm Secure Execution
     Environment firmware interface to access EFI variables on certain
     devices, and new features for multiple platform and firmware
     drivers.

   - Arm FF-A firmware support gains support for v1.1 specification
     features, in particular notification and memory transaction
     descriptor changes.

   - SCMI firmware support now support v3.2 features for clock and DVFS
     configuration and a new transport for Qualcomm platforms.

   - Minor cleanups and bugfixes are added to pretty much all the active
     platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
     amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
     more.

     In particular, this contains portions of the treewide conversion to
     use __counted_by annotations and the device_get_match_data helper"

* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
  soc: qcom: pmic_glink_altmode: Print return value on error
  firmware: qcom: scm: remove unneeded 'extern' specifiers
  firmware: qcom: scm: add a missing forward declaration for struct device
  firmware: qcom: move Qualcomm code into its own directory
  soc: samsung: exynos-chipid: Convert to platform remove callback returning void
  soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
  soc: qcom: pmic_glink: fix connector type to be DisplayPort
  soc: ti: k3-socinfo: Avoid overriding return value
  soc: ti: k3-socinfo: Fix typo in bitfield documentation
  soc: ti: knav_qmss_queue: Use device_get_match_data()
  firmware: ti_sci: Use device_get_match_data()
  firmware: qcom: qseecom: add missing include guards
  soc/pxa: ssp: Convert to platform remove callback returning void
  soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
  soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
  soc/loongson: loongson2_guts: Convert to platform remove callback returning void
  soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
  soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
  soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
  soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
  ...

Pull SoC DT updates from Arnd Bergmann:
 "There are a couple new SoCs that are supported for the first time:

   - AMD Pensando Elba is a data processing unit based on Cortex-A72 CPU
     cores

   - Sophgo makes RISC-V based chips, and we now support the CV1800B
     chip used in the milkv-duo board and the massive sg2042 chip in the
     milkv-pioneer, a 64-core developer workstation.

   - Qualcomm Snapdragon 720G (sm7125) is a close relative of Snapdragon
     7c and gets added with some Xiaomi phones

   - Renesas gains support for the R8A779F4 (R-Car S4-8) automotive SoC
     and the RZ/G3S (R9A08G045) embedded SoC.

  There are also a bunch of newly supported machines that use already
  supported chips. On the 32-bit side, we have:

   - USRobotics USR8200 is a NAS/Firewall/router based on the ancient
     Intel IXP4xx platform

   - A couple of machines based on the NXP i.MX5 and i.MX6 platforms

   - One machine each for Allwinner V3s, Aspeed AST2600, Microchip
     sama5d29 and ST STM32mp157

  The other ones all use arm64 cores on chips from allwinner, amlogic,
  freescale, mediatek, qualcomm and rockchip"

* tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (641 commits)
  ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
  ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports
  ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports
  ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT
  ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT
  ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
  arm64: dts: socionext: add missing cache properties
  riscv: dts: thead: convert isa detection to new properties
  arm64: dts: Update cache properties for socionext
  arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
  arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support
  arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
  arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM
  arm64: dts: ti: k3-am62p: Add nodes for more IPs
  arm64: dts: rockchip: Add Turing RK1 SoM support
  dt-bindings: arm: rockchip: Add Turing RK1
  dt-bindings: vendor-prefixes: add turing
  arm64: dts: rockchip: Add DFI to rk3588s
  arm64: dts: rockchip: Add DFI to rk356x
  arm64: dts: rockchip: Always enable DFI on rk3399
  ...

Pull VFIO updates from Alex Williamson:

 - Add support for "chunk mode" in the mlx5-vfio-pci variant driver,
   which allows both larger device image sizes for migration, beyond the
   previous 4GB limit, and also read-ahead support for improved
   migration performance (Yishai Hadas)

 - A new bus master control interface for the CDX bus driver where there
   is no in-band mechanism to toggle device DMA as there is through
   config space on PCI devices (Nipun Gupta)

 - Add explicit alignment directives to vfio data structures to reduce
   the chance of breaking 32-bit userspace. In most cases this is
   transparent and the remaining cases where data structures are padded
   work within the existing rules for extending data structures within
   vfio (Stefan Hajnoczi)

 - Resolve a bug in the cdx bus driver noted when compiled with clang
   where missing parenthesis result in the wrong operation (Nathan
   Chancellor)

 - Resolve errors reported by smatch for a function when dealing with
   invalid inputs (Alex Williamson)

 - Add migration support to the mtty vfio/mdev sample driver for testing
   and integration purposes, allowing CI of migration without specific
   hardware requirements. Also resolve many of the short- comings of
   this driver relative to implementation of the vfio interrupt ioctl
   along the way (Alex Williamson)

* tag 'vfio-v6.7-rc1' of https://github.com/awilliam/linux-vfio:
  vfio/mtty: Enable migration support
  vfio/mtty: Overhaul mtty interrupt handling
  vfio: Fix smatch errors in vfio_combine_iova_ranges()
  vfio/cdx: Add parentheses between bitwise AND expression and logical NOT
  vfio/mlx5: Activate the chunk mode functionality
  vfio/mlx5: Add support for READING in chunk mode
  vfio/mlx5: Add support for SAVING in chunk mode
  vfio/mlx5: Pre-allocate chunks for the STOP_COPY phase
  vfio/mlx5: Rename some stuff to match chunk mode
  vfio/mlx5: Enable querying state size which is > 4GB
  vfio/mlx5: Refactor the SAVE callback to activate a work only upon an error
  vfio/mlx5: Wake up the reader post of disabling the SAVING migration file
  vfio: use __aligned_u64 in struct vfio_device_ioeventfd
  vfio: use __aligned_u64 in struct vfio_device_gfx_plane_info
  vfio: trivially use __aligned_u64 for ioctl structs
  vfio-cdx: add bus mastering device feature support
  vfio: add bus master feature to device feature ioctl
  cdx: add support for bus mastering

Pull dma-mapping updates from Christoph Hellwig:

 - get rid of the fake support for coherent DMA allocation on coldfire
   with caches (Christoph Hellwig)

 - add a few Kconfig dependencies so that Kconfig catches the use of
   invalid configurations (Christoph Hellwig)

 - fix a type in dma-debug output (Chuck Lever)

 - rewrite a comment in swiotlb (Sean Christopherson)

* tag 'dma-mapping-6.7-2023-10-30' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: Fix a typo in a debugging eye-catcher
  swiotlb: rewrite comment explaining why the source is preserved on DMA_FROM_DEVICE
  m68k: remove unused includes from dma.c
  m68k: don't provide arch_dma_alloc for nommu/coldfire
  net: fec: use dma_alloc_noncoherent for data cache enabled coldfire
  m68k: use the coherent DMA code for coldfire without data cache
  dma-direct: warn when coherent allocations aren't supported
  dma-direct: simplify the use atomic pool logic in dma_direct_alloc
  dma-direct: add a CONFIG_ARCH_HAS_DMA_ALLOC symbol
  dma-direct: add dependencies to CONFIG_DMA_GLOBAL_POOL

Pull pmdomain updates from Ulf Hansson:

 - Move Kconfig files into the pmdomain subsystem

 - Drop use of genpd's redundant ->opp_to_performance_state() callback

 - amlogic:
    - Add support for the T7 power-domains controller
    - Fix mask for the second NNA mem power-domain

 - bcm: Fixup ASB register read and comparison for bcm2835-power

 - imx: Fix device link problem for consumers of the pgc power-domain

 - mediatek: Add support for the MT8365 power domains

 - qcom:
    - Add support for the rpmhpds for SC8380XP power-domains
    - Add support for the rpmhpds for SM8650 power-domains
    - Add support for the rpmhpd clocks for SM7150
    - Add support for the rpmpds for MSM8917 (families) power-domains

 - starfive: Add support for the JH7110 AON PMU

* tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (56 commits)
  pmdomain: amlogic: Fix mask for the second NNA mem PD domain
  pmdomain: qcom: rpmhpd: Add SC8380XP power domains
  pmdomain: qcom: rpmhpd: Add SM8650 RPMh Power Domains
  dt-bindings: power: rpmpd: Add SC8380XP support
  dt-bindings: power: qcom,rpmhpd: Add GMXC PD index
  dt-bindings: power: qcom,rpmpd: document the SM8650 RPMh Power Domains
  pmdomain: imx: Make imx pgc power domain also set the fwnode
  pmdomain: qcom: rpmpd: Add QM215 power domains
  pmdomain: qcom: rpmpd: Add MSM8917 power domains
  dt-bindings: power: rpmpd: Add MSM8917, MSM8937 and QM215
  pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable
  pmdomain: qcom: rpmhpd: Drop the ->opp_to_performance_state() callback
  pmdomain: qcom: rpmpd: Drop the ->opp_to_performance_state() callback
  pmdomain: qcom: cpr: Drop the ->opp_to_performance_state() callback
  pmdomain: Use device_get_match_data()
  pmdomain: ti: add missing of_node_put
  pmdomain: mediatek: Add support for MT8365
  pmdomain: mediatek: Add support for MTK_SCPD_STRICT_BUS_PROTECTION cap
  pmdomain: mediatek: Add support for WAY_EN operations
  pmdomain: mediatek: Unify configuration for infracfg and smi
  ...

Pull MMC updates from Ulf Hansson:
" MMC core:
   - Enable host caps to be modified via debugfs to test speed-modes
   - Improve random I/O writes for 4k buffers for hsq enabled hosts

  MMC host:
   - atmel-mci/sdhci-of-at91: Aubin Constans takes over as maintainer
   - dw_mmc-starfive: Re-work tuning support
   - meson-gx: Fix bogus IRQ when using CMD_CFG_ERROR
   - mmci: Use peripheral flow control for the STM32 variant
   - renesas,sdhi: Add support for the RZ/G3S variant
   - sdhci-esdhc-imx: Optimize the manual tuning logic
   - sdhci-msm: Add support for the SM8650 variant
   - sdhci-npcm: Add driver to support the Nuvoton NPCM BMC variant
   - sdhci-pci-gli: Add workaround to allow GL9750 to enter ASPM L1.2"

* tag 'mmc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (25 commits)
  dt-bindings: mmc: sdhci-msm: document the SM8650 SDHCI Controller
  mmc: meson-gx: Remove setting of CMD_CFG_ERROR
  MAINTAINERS: mmc: take over as maintainer of MCI & SDHCI MICROCHIP DRIVERS
  mmc: jz4740: Use device_get_match_data()
  mmc: sdhci-npcm: Add NPCM SDHCI driver
  dt-bindings: mmc: npcm,sdhci: Document NPCM SDHCI controller
  mmc: sdhci-pltfm: Make driver OF independent
  mmc: sdhci-pltfm: Drop unnecessary error messages in sdhci_pltfm_init()
  mmc: sdhci-pci: Switch to use acpi_evaluate_dsm_typed()
  mmc: debugfs: Allow host caps to be modified
  mmc: core: Always reselect card type
  mmc: mmci: use peripheral flow control for STM32
  mmc: vub300: replace deprecated strncpy with strscpy
  memstick: jmb38x_ms: Annotate struct jmb38x_ms with __counted_by
  mmc: starfive: Change tuning implementation
  dt-bindings: mmc: starfive: Remove properties from required
  mmc: hsq: Improve random I/O write performance for 4k buffers
  mmc: core: Allow dynamical updates of the number of requests for hsq
  mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2
  dt-bindings: mmc: renesas,sdhi: Document RZ/G3S support
  ...

Merge tag 'for-6.7/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Update DM core to directly call the map function for both the linear
   and stripe targets; which are provided by DM core

 - Various updates to use new safer string functions

 - Update DM core to respect REQ_NOWAIT flag in normal bios so that
   memory allocations are always attempted with GFP_NOWAIT

 - Add Mikulas Patocka to MAINTAINERS as a DM maintainer!

 - Improve DM delay target's handling of short delays (< 50ms) by using
   a kthread to check expiration of IOs rather than timers and a wq

 - Update the DM error target so that it works with zoned storage. This
   helps xfstests to provide proper IO error handling coverage when
   testing a filesystem with native zoned storage support

 - Update both DM crypt and integrity targets to improve performance by
   using crypto_shash_digest() rather than init+update+final sequence

 - Fix DM crypt target by backfilling missing memory allocation
   accounting for compound pages

* tag 'for-6.7/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm crypt: account large pages in cc->n_allocated_pages
  dm integrity: use crypto_shash_digest() in sb_mac()
  dm crypt: use crypto_shash_digest() in crypt_iv_tcw_whitening()
  dm error: Add support for zoned block devices
  dm delay: for short delays, use kthread instead of timers and wq
  MAINTAINERS: add Mikulas Patocka as a DM maintainer
  dm: respect REQ_NOWAIT flag in normal bios issued to DM
  dm: enhance alloc_multiple_bios() to be more versatile
  dm: make __send_duplicate_bios return unsigned int
  dm log userspace: replace deprecated strncpy with strscpy
  dm ioctl: replace deprecated strncpy with strscpy_pad
  dm crypt: replace open-coded kmemdup_nul
  dm cache metadata: replace deprecated strncpy with strscpy
  dm: shortcut the calls to linear_map and stripe_map

Pull ATA updates from Damien Le Moal:

 - Modify the AHCI driver to print the link power management policy used
   on scan, to help with debugging issues (Niklas)

 - Add support for the ASM2116 series adapters to the AHCI driver
   (Szuying)

 - Prepare libata for the coming gcc and Clang __counted_by attribute
   (Kees)

 - Following the recent estensive fixing of libata suspend/resume
   handling, several patches further cleanup and improve disk power
   state management (me)

 - Reduce the verbosity of some error messages for non-fatal temporary
   errors, e.g. slow response to device reset when scanning a port, and
   warning messages that are in fact normal, e.g. disabling a device on
   suspend or when removing it (me)

 - Cleanup DMA helper functions (me)

 - Fix sata_mv drive handling of potential errors durring probe (Ma)

 - Cleanup the xgene and imx drivers using the functions
   of_device_get_match_data() and device_get_match_data() (Rob)

 - Improve the tegra driver device tree (Rob)

* tag 'ata-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (22 commits)
  dt-bindings: ata: tegra: Disallow undefined properties
  ata: libata-core: Improve ata_dev_power_set_active()
  ata: libata-eh: Spinup disk on resume after revalidation
  ata: imx: Use device_get_match_data()
  ata: xgene: Use of_device_get_match_data()
  ata: sata_mv: aspeed: fix value check in mv_platform_probe()
  ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  ata: libata: Cleanup inline DMA helper functions
  ata: libata-eh: Reduce "disable device" message verbosity
  ata: libata-eh: Improve reset error messages
  ata: libata-sata: Improve ata_sas_slave_configure()
  ata: libata-core: Do not resume runtime suspended ports
  ata: libata-core: Do not poweroff runtime suspended ports
  ata: libata-core: Remove ata_port_resume_async()
  ata: libata-core: Remove ata_port_suspend_async()
  ata: libata-core: Detach a port devices on shutdown
  ata: libata-core: Synchronize ata_port_detach() with hotplug
  ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  scsi: Remove scsi device no_start_on_resume flag
  ata: libata: Annotate struct ata_cpr_log with __counted_by
  ...

Pull block updates from Jens Axboe:

 - Improvements to the queue_rqs() support, and adding null_blk support
   for that as well (Chengming)

 - Series improving badblocks support (Coly)

 - Key store support for sed-opal (Greg)

 - IBM partition string handling improvements (Jan)

 - Make number of ublk devices supported configurable (Mike)

 - Cancelation improvements for ublk (Ming)

 - MD pull requests via Song:
     - Handle timeout in md-cluster, by Denis Plotnikov
     - Cleanup pers->prepare_suspend, by Yu Kuai
     - Rewrite mddev_suspend(), by Yu Kuai
     - Simplify md_seq_ops, by Yu Kuai
     - Reduce unnecessary locking array_state_store(), by Mariusz
       Tkaczyk
     - Make rdev add/remove independent from daemon thread, by Yu Kuai
     - Refactor code around quiesce() and mddev_suspend(), by Yu Kuai

 - NVMe pull request via Keith:
     - nvme-auth updates (Mark)
     - nvme-tcp tls (Hannes)
     - nvme-fc annotaions (Kees)

 - Misc cleanups and improvements (Jiapeng, Joel)

* tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux: (95 commits)
  block: ublk_drv: Remove unused function
  md: cleanup pers->prepare_suspend()
  nvme-auth: allow mixing of secret and hash lengths
  nvme-auth: use transformed key size to create resp
  nvme-auth: alloc nvme_dhchap_key as single buffer
  nvmet-tcp: use 'spin_lock_bh' for state_lock()
  powerpc/pseries: PLPKS SED Opal keystore support
  block: sed-opal: keystore access for SED Opal keys
  block:sed-opal: SED Opal keystore
  ublk: simplify aborting request
  ublk: replace monitor with cancelable uring_cmd
  ublk: quiesce request queue when aborting queue
  ublk: rename mm_lock as lock
  ublk: move ublk_cancel_dev() out of ub->mutex
  ublk: make sure io cmd handled in submitter task context
  ublk: don't get ublk device reference in ublk_abort_queue()
  ublk: Make ublks_max configurable
  ublk: Limit dev_id/ub_number values
  md-cluster: check for timeout while a new disk adding
  nvme: rework NVME_AUTH Kconfig selection
  ...

Pull io_uring futex support from Jens Axboe:
 "This adds support for using futexes through io_uring - first futex
  wake and wait, and then the vectored variant of waiting, futex waitv.

  For both wait/wake/waitv, we support the bitset variant, as the
  'normal' variants can be easily implemented on top of that.

  PI and requeue are not supported through io_uring, just the above
  mentioned parts. This may change in the future, but in the spirit of
  keeping this small (and based on what people have been asking for),
  this is what we currently have.

  Wake support is pretty straight forward, most of the thought has gone
  into the wait side to avoid needing to offload wait operations to a
  blocking context. Instead, we rely on the usual callbacks to retry and
  post a completion event, when appropriate.

  As far as I can recall, the first request for futex support with
  io_uring came from Andres Freund, working on postgres. His aio rework
  of postgres was one of the early adopters of io_uring, and futex
  support was a natural extension for that. This is relevant from both a
  usability point of view, as well as for effiency and performance. In
  Andres's words, for the former:

     Futex wait support in io_uring makes it a lot easier to avoid
     deadlocks in concurrent programs that have their own buffer pool:
     Obviously pages in the application buffer pool have to be locked
     during IO. If the initiator of IO A needs to wait for a held lock
     B, the holder of lock B might wait for the IO A to complete. The
     ability to wait for a lock and IO completions at the same time
     provides an efficient way to avoid such deadlocks

  and in terms of effiency, even without unlocking the full potential
  yet, Andres says:

     Futex wake support in io_uring is useful because it allows for more
     efficient directed wakeups. For some "locks" postgres has queues
     implemented in userspace, with wakeup logic that cannot easily be
     implemented with FUTEX_WAKE_BITSET on a single "futex word"
     (imagine waiting for journal flushes to have completed up to a
     certain point).

     Thus a "lock release" sometimes need to wake up many processes in a
     row. A quick-and-dirty conversion to doing these wakeups via
     io_uring lead to a 3% throughput increase, with 12% fewer context
     switches, albeit in a fairly extreme workload"

* tag 'io_uring-futex-2023-10-30' of git://git.kernel.dk/linux:
  io_uring: add support for vectored futex waits
  futex: make the vectored futex operations available
  futex: make futex_parse_waitv() available as a helper
  futex: add wake_data to struct futex_q
  io_uring: add support for futex wake and wait
  futex: abstract out a __futex_wake_mark() helper
  futex: factor out the futex wake handling
  futex: move FUTEX2_VALID_MASK to futex.h

Pull io_uring {get,set}sockopt support from Jens Axboe:
 "This adds support for using getsockopt and setsockopt via io_uring.

  The main use cases for this is to enable use of direct descriptors,
  rather than first instantiating a normal file descriptor, doing the
  option tweaking needed, then turning it into a direct descriptor. With
  this support, we can avoid needing a regular file descriptor
  completely.

  The net and bpf bits have been signed off on their side"

* tag 'for-6.7/io_uring-sockopt-2023-10-30' of git://git.kernel.dk/linux:
  selftests/bpf/sockopt: Add io_uring support
  io_uring/cmd: Introduce SOCKET_URING_OP_SETSOCKOPT
  io_uring/cmd: Introduce SOCKET_URING_OP_GETSOCKOPT
  io_uring/cmd: return -EOPNOTSUPP if net is disabled
  selftests/net: Extract uring helpers to be reusable
  tools headers: Grab copy of io_uring.h
  io_uring/cmd: Pass compat mode in issue_flags
  net/socket: Break down __sys_getsockopt
  net/socket: Break down __sys_setsockopt
  bpf: Add sockptr support for setsockopt
  bpf: Add sockptr support for getsockopt

Pull io_uring updates from Jens Axboe:
 "This contains the core io_uring updates, of which there are not many,
  and adds support for using WAITID through io_uring and hence not
  needing to block on these kinds of events.

  Outside of that, tweaks to the legacy provided buffer handling and
  some cleanups related to cancelations for uring_cmd support"

* tag 'for-6.7/io_uring-2023-10-30' of git://git.kernel.dk/linux:
  io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups
  io_uring/kbuf: Use slab for struct io_buffer objects
  io_uring/kbuf: Allow the full buffer id space for provided buffers
  io_uring/kbuf: Fix check of BID wrapping in provided buffers
  io_uring/rsrc: cleanup io_pin_pages()
  io_uring: cancelable uring_cmd
  io_uring: retain top 8bits of uring_cmd flags for kernel internal use
  io_uring: add IORING_OP_WAITID support
  exit: add internal include file with helpers
  exit: add kernel_waitid_prepare() helper
  exit: move core of do_wait() into helper
  exit: abstract out should_wake helper for child_wait_callback()
  io_uring/rw: add support for IORING_OP_READ_MULTISHOT
  io_uring/rw: mark readv/writev as vectored in the opcode definition
  io_uring/rw: split io_read() into a helper

Pull xen updates from Juergen Gross:

 - two small cleanup patches

 - a fix for PCI passthrough under Xen

 - a four patch series speeding up virtio under Xen with user space
   backends

* tag 'for-linus-6.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen-pciback: Consider INTx disabled when MSI/MSI-X is enabled
  xen: privcmd: Add support for ioeventfd
  xen: evtchn: Allow shared registration of IRQ handers
  xen: irqfd: Use _IOW instead of the internal _IOC() macro
  xen: Make struct privcmd_irqfd's layout architecture independent
  xen/xenbus: Add __counted_by for struct read_buffer and use struct_size()
  xenbus: fix error exit in xenbus_init()

Pull x86 TDX updates from Dave Hansen:
 "The majority of this is a rework of the assembly and C wrappers that
  are used to talk to the TDX module and VMM. This is a nice cleanup in
  general but is also clearing the way for using this code when Linux is
  the TDX VMM.

  There are also some tidbits to make TDX guests play nicer with Hyper-V
  and to take advantage the hardware TSC.

  Summary:

   - Refactor and clean up TDX hypercall/module call infrastructure

   - Handle retrying/resuming page conversion hypercalls

   - Make sure to use the (shockingly) reliable TSC in TDX guests"

[ TLA reminder: TDX is "Trust Domain Extensions", Intel's guest VM
  confidentiality technology ]

* tag 'x86_tdx_for_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tdx: Mark TSC reliable
  x86/tdx: Fix __noreturn build warning around __tdx_hypercall_failed()
  x86/virt/tdx: Make TDX_MODULE_CALL handle SEAMCALL #UD and #GP
  x86/virt/tdx: Wire up basic SEAMCALL functions
  x86/tdx: Remove 'struct tdx_hypercall_args'
  x86/tdx: Reimplement __tdx_hypercall() using TDX_MODULE_CALL asm
  x86/tdx: Make TDX_HYPERCALL asm similar to TDX_MODULE_CALL
  x86/tdx: Extend TDX_MODULE_CALL to support more TDCALL/SEAMCALL leafs
  x86/tdx: Pass TDCALL/SEAMCALL input/output registers via a structure
  x86/tdx: Rename __tdx_module_call() to __tdcall()
  x86/tdx: Make macros of TDCALLs consistent with the spec
  x86/tdx: Skip saving output regs when SEAMCALL fails with VMFailInvalid
  x86/tdx: Zero out the missing RSI in TDX_HYPERCALL macro
  x86/tdx: Retry partially-completed page conversion hypercalls

Pull parisc updates from Helge Deller:
 "Usual fixes and updates:

   - Add up to 12 nops after TLB inserts for PA8x00 CPUs as the
     specification requires (Dave Anglin)

   - Simplify the parisc smp_prepare_boot_cpu() code (Russell King)

   - Use 64-bit little-endian values in SBA IOMMU PDIR table for AGP

  Since there is upcoming support for booting a 64-bit kernel on QEMU,
  some corner cases were fixed and improvements added:

   - Fix 64-bit kernel crash in STI (graphics console) font setup code
     which miscalculated the font start address as it gets signed vs
     unsigned offsets wrong

   - Support building an uncompressed Linux kernel

   - Add support for soft power-off in qemu"

* tag 'parisc-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  fbdev: stifb: Make the STI next font pointer a 32-bit signed offset
  parisc: Show default CPU PSW.W setting as reported by PDC
  parisc/pdc: Add width field to struct pdc_model
  parisc: Add nop instructions after TLB inserts
  parisc: simplify smp_prepare_boot_cpu()
  parisc/agp: Use 64-bit LE values in SBA IOMMU PDIR table
  parisc/firmware: Use PDC constants for narrow/wide firmware
  parisc: Move parisc_narrow_firmware variable to header file
  parisc/power: Trivial whitespace cleanups and license update
  parisc/power: Add power soft-off when running on qemu
  parisc: Allow building uncompressed Linux kernel
  parisc: Add some missing PDC functions and constants
  parisc: sba-iommu: Fix comment when calculating IOC number

Pull m68k updates from Geert Uytterhoeven:

 - misc aesthetical improvements for the floating point emulator

 - remove the last user of strlcpy()

 - use kernel's generic libgcc functions

 - misc fixes for W=1 builds

 - misc indentation fixes

 - misc fixes and improvements

 - defconfig updates

* tag 'm68k-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (72 commits)
  m68k: lib: Include <linux/libgcc.h> for __muldi3()
  m68k: fpsp040: Fix indentation by 5 spaces
  m68k: Fix indentation by 2 or 5 spaces in <asm/page_mm.h>
  m68k: kernel: Fix indentation by 7 spaces in traps.c
  m68k: sun3: Fix indentation by 5 or 7 spaces
  m68k: Fix indentation by 7 spaces in <asm/io_mm.h>
  m68k: defconfig: Update virt_defconfig for v6.6-rc3
  m68k: defconfig: Update defconfigs for v6.6-rc1
  m68k: io: Mark mmio read addresses as const
  m68k: Replace GPL 2.0+ README.legal boilerplate with SPDX
  m68k: sun3: Change led_pattern[] to unsigned char
  m68k: Add missing types to asm/irq.h
  m68k: sun3/3x: Add and use "sun3.h"
  m68k: sun3x: Make dvma_print() static
  m68k: sun3x: Make sun3x_halt() static
  m68k: sun3x: Do not mark dvma_map_iommu() inline
  m68k: sun3x: Fix signature of sun3_leds()
  m68k: sun3: Make sun3_platform_init() static
  m68k: sun3: Make print_pte() static
  m68k: sun3: Annotate prom_printf() with __printf()
  ...

Pull arm64 updates from Catalin Marinas:
 "No major architecture features this time around, just some new HWCAP
  definitions, support for the Ampere SoC PMUs and a few fixes/cleanups.

  The bulk of the changes is reworking of the CPU capability checking
  code (cpus_have_cap() etc).

   - Major refactoring of the CPU capability detection logic resulting
     in the removal of the cpus_have_const_cap() function and migrating
     the code to "alternative" branches where possible

   - Backtrace/kgdb: use IPIs and pseudo-NMI

   - Perf and PMU:

      - Add support for Ampere SoC PMUs

      - Multi-DTC improvements for larger CMN configurations with
        multiple Debug & Trace Controllers

      - Rework the Arm CoreSight PMU driver to allow separate
        registration of vendor backend modules

      - Fixes: add missing MODULE_DEVICE_TABLE to the amlogic perf
        driver; use device_get_match_data() in the xgene driver; fix
        NULL pointer dereference in the hisi driver caused by calling
        cpuhp_state_remove_instance(); use-after-free in the hisi driver

   - HWCAP updates:

      - FEAT_SVE_B16B16 (BFloat16)

      - FEAT_LRCPC3 (release consistency model)

      - FEAT_LSE128 (128-bit atomic instructions)

   - SVE: remove a couple of pseudo registers from the cpufeature code.
     There is logic in place already to detect mismatched SVE features

   - Miscellaneous:

      - Reduce the default swiotlb size (currently 64MB) if no ZONE_DMA
        bouncing is needed. The buffer is still required for small
        kmalloc() buffers

      - Fix module PLT counting with !RANDOMIZE_BASE

      - Restrict CPU_BIG_ENDIAN to LLVM IAS 15.x or newer move
        synchronisation code out of the set_ptes() loop

      - More compact cpufeature displaying enabled cores

      - Kselftest updates for the new CPU features"

 * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
  arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
  arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
  arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
  perf: hisi: Fix use-after-free when register pmu fails
  drivers/perf: hisi_pcie: Initialize event->cpu only on success
  drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
  arm64: cpufeature: Change DBM to display enabled cores
  arm64: cpufeature: Display the set of cores with a feature
  perf/arm-cmn: Enable per-DTC counter allocation
  perf/arm-cmn: Rework DTC counters (again)
  perf/arm-cmn: Fix DTC domain detection
  drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
  drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
  drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
  clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
  arm64: Remove system_uses_lse_atomics()
  arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
  drivers/perf: xgene: Use device_get_match_data()
  perf/amlogic: add missing MODULE_DEVICE_TABLE
  arm64/mm: Hoist synchronization out of set_ptes() loop
  ...

Pull drm updates from Dave Airlie:
 "Highlights:
   - AMD adds some more upcoming HW platforms
   - Intel made Meteorlake stable and started adding Lunarlake
   - nouveau has a bunch of display rework in prepartion for the NVIDIA
     GSP firmware support
   - msm adds a7xx support
   - habanalabs has finished migration to accel subsystem

  Detail summary:

  kernel:
   - add initial vmemdup-user-array

  core:
   - fix platform remove() to return void
   - drm_file owner updated to reflect owner
   - move size calcs to drm buddy allocator
   - let GPUVM build as a module
   - allow variable number of run-queues in scheduler

  edid:
   - handle bad h/v sync_end in EDIDs

  panfrost:
   - add Boris as maintainer

  fbdev:
   - use fb_ops helpers more
   - only allow logo use from fbcon
   - rename fb_pgproto to pgprot_framebuffer
   - add HPD state to drm_connector_oob_hotplug_event
   - convert to fbdev i/o mem helpers

  i915:
   - Enable meteorlake by default
   - Early Xe2 LPD/Lunarlake display enablement
   - Rework subplatforms into IP version checks
   - GuC based TLB invalidation for Meteorlake
   - Display rework for future Xe driver integration
   - LNL FBC features
   - LNL display feature capability reads
   - update recommended fw versions for DG2+
   - drop fastboot module parameter
   - added deviceid for Arrowlake-S
   - drop preproduction workarounds
   - don't disable preemption for resets
   - cleanup inlines in headers
   - PXP firmware loading fix
   - Fix sg list lengths
   - DSC PPS state readout/verification
   - Add more RPL P/U PCI IDs
   - Add new DG2-G12 stepping
   - DP enhanced framing support to state checker
   - Improve shared link bandwidth management
   - stop using GEM macros in display code
   - refactor related code into display code
   - locally enable W=1 warnings
   - remove PSR watchdog timers on LNL

  amdgpu:
   - RAS/FRU EEPROM updatse
   - IP discovery updatses
   - GC 11.5 support
   - DCN 3.5 support
   - VPE 6.1 support
   - NBIO 7.11 support
   - DML2 support
   - lots of IP updates
   - use flexible arrays for bo list handling
   - W=1 fixes
   - Enable seamless boot in more cases
   - Enable context type property for HDMI
   - Rework GPUVM TLB flushing
   - VCN IB start/size alignment fixes

  amdkfd:
   - GC 10/11 fixes
   - GC 11.5 support
   - use partial migration in GPU faults

  radeon:
   - W=1 Fixes
   - fix some possible buffer overflow/NULL derefs

  nouveau:
   - update uapi for NO_PREFETCH
   - scheduler/fence fixes
   - rework suspend/resume for GSP-RM
   - rework display in preparation for GSP-RM

  habanalabs:
   - uapi: expose tsc clock
   - uapi: block access to eventfd through control device
   - uapi: force dma-buf export to PAGE_SIZE alignments
   - complete move to accel subsystem
   - move firmware interface include files
   - perform hard reset on PCIe AXI drain event
   - optimise user interrupt handling

  msm:
   - DP: use existing helpers for DPCD
   - DPU: interrupts reworked
   - gpu: a7xx (a730/a740) support
   - decouple msm_drv from kms for headless devices

  mediatek:
   - MT8188 dsi/dp/edp support
   - DDP GAMMA - 12 bit LUT support
   - connector dynamic selection capability

  rockchip:
   - rv1126 mipi-dsi/vop support
   - add planar formats

  ast:
   - rename constants

  panels:
   - Mitsubishi AA084XE01
   - JDI LPM102A188A
   - LTK050H3148W-CTA6

  ivpu:
   - power management fixes

  qaic:
   - add detach slice bo api

  komeda:
   - add NV12 writeback

  tegra:
   - support NVSYNC/NHSYNC
   - host1x suspend fixes

  ili9882t:
   - separate into own driver"

* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
  drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
  drm/amdgpu: Remove duplicate fdinfo fields
  drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
  drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
  drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
  drm/amdgpu: Identify data parity error corrected in replay mode
  drm/amdgpu: Fix typo in IP discovery parsing
  drm/amd/display: fix S/G display enablement
  drm/amdxcp: fix amdxcp unloads incompletely
  drm/amd/amdgpu: fix the GPU power print error in pm info
  drm/amdgpu: Use pcie domain of xcc acpi objects
  drm/amd: check num of link levels when update pcie param
  drm/amdgpu: Add a read to GFX v9.4.3 ring test
  drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
  drm/amdgpu: get RAS poison status from DF v4_6_2
  drm/amdgpu: Use discovery table's subrevision
  drm/amd/display: 3.2.256
  drm/amd/display: add interface to query SubVP status
  drm/amd/display: Read before writing Backlight Mode Set Register
  drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
  ...

Pull devicetree updates from Rob Herring:

 - Add a kselftest to check for unprobed DT devices

 - Fix address translation for some 3 address cells cases

 - Refactor firmware node refcounting for AMBA bus

 - Add bindings for qcom,sm4450-pdc, Qualcomm Kryo 465 CPU, and
   Freescale QMC HDLC

 - Add Marantec vendor prefix

 - Convert qcom,pm8921-keypad, cnxt,cx92755-wdt, da9062-wdt, and
   atmel,at91rm9200-wdt bindings to DT schema

 - Several additionalProperties/unevaluatedProperties on child node
   schemas fixes

 - Drop reserved-memory bindings which now live in dtschema project

 - Fix a reference to rockchip,inno-usb2phy.yaml

 - Remove backlight nodes from display panel examples

 - Expand example for using DT_SCHEMA_FILES

 - Merge simple LVDS panel bindings to one binding doc

* tag 'devicetree-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
  dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add support for QMC HDLC
  dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add 'additionalProperties: false' in child nodes
  dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Fix example property name
  dt-bindings: arm,coresight-cti: Add missing additionalProperties on child nodes
  dt-bindings: arm,coresight-cti: Drop type for 'cpu' property
  dt-bindings: soundwire: Add reference to soundwire-controller.yaml schema
  dt-bindings: input: syna,rmi4: Make "additionalProperties: true" explicit
  media: dt-bindings: ti,ds90ub960: Add missing type for "i2c-alias"
  dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  of: overlay: unittest: overlay_bad_unresolved: Spelling s/ok/okay/
  of: address: Consolidate bus .map() functions
  of: address: Store number of bus flag cells rather than bool
  of: unittest: Add tests for address translations
  of: address: Remove duplicated functions
  of: address: Fix address translation when address-size is greater than 2
  dt-bindings: watchdog: cnxt,cx92755-wdt: convert txt to yaml
  dt-bindings: watchdog: da9062-wdt: convert txt to yaml
  dt-bindings: watchdog: fsl,scu-wdt: Document imx8dl
  dt-bindings: watchdog: atmel,at91rm9200-wdt: convert txt to yaml
  dt-bindings: usb: rockchip,dwc3: update inno usb2 phy binding name
  ...