- 15 Mar, 2018 40 commits
-
-
Masahiro Yamada authored
commit cfe17c9b upstream. Geert reported commit ae6b289a ("kbuild: Set KBUILD_CFLAGS before incl. arch Makefile") broke cross-compilation using a cross-compiler that supports less compiler options than the host compiler. For example, cc1: error: unrecognized command line option "-Wno-unused-but-set-variable" This problem happens on architectures that setup CROSS_COMPILE in their arch/*/Makefile. Move the cc-option and cc-disable-warning back to the original position, but keep the Clang target options untouched. Fixes: ae6b289a ("kbuild: Set KBUILD_CFLAGS before incl. arch Makefile") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Fries authored
commit ae6b289a upstream. Set the clang KBUILD_CFLAGS up before including arch/ Makefiles, so that ld-options (etc.) can work correctly. This fixes errors with clang such as ld-options trying to CC against your host architecture, but LD trying to link against your target architecture. Signed-off-by:
Chris Fries <cfries@google.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Tested-by:
-
Masahiro Yamada authored
commit 2c1f4f12 upstream. The top Makefile is divided into some sections such as mixed targets, config targets, build targets, etc. When we build mixed targets, Kbuild just invokes submake to process them one by one. In this case, compiler-related variables like CC, KBUILD_CFLAGS, etc. are unneeded. Check what kind of targets we are building first, and parse variables for building only when necessary. Signed-off-by:
-
Peter Zijlstra authored
commit b5bc2231 upstream. David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled builds, where it validates no unannotated indirect jumps or calls are left. Add an additional .discard.retpoline_safe section to allow annotating the few indirect sites that are required and safe. Requested-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
David Woodhouse <dwmw@amazon.co.uk> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
commit 43a4525f upstream. Use the existing global variables instead of passing them around and creating duplicate global variables. Signed-off-by:
-
Peter Zijlstra authored
commit 531bb52a upstream. This is boot code and thus Spectre-safe: we run this _way_ before userspace comes along to have a chance to poison our branch predictor. Signed-off-by:
-
Peter Zijlstra authored
commit bd89004f upstream. The objtool retpoline validation found this indirect jump. Seeing how it's on CPU bringup before we run userspace it should be safe, annotate it. Signed-off-by:
-
Peter Zijlstra authored
commit 3010a066 upstream. Paravirt emits indirect calls which get flagged by objtool retpoline checks, annotate it away because all these indirect calls will be patched out before we start userspace. This patching happens through alternative_instructions() -> apply_paravirt() -> pv_init_ops.patch() which will eventually end up in paravirt_patch_default(). This function _will_ write direct alternatives. Signed-off-by:
-
Ingo Molnar authored
commit d72f4e29 upstream. firmware_restrict_branch_speculation_*() recently started using preempt_enable()/disable(), but those are relatively high level primitives and cause build failures on some 32-bit builds. Since we want to keep <asm/nospec-branch.h> low level, convert them to macros to avoid header hell... Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: arjan.van.de.ven@intel.com Cc: bp@alien8.de Cc: dave.hansen@intel.com Cc: jmattson@google.com Cc: karahmed@amazon.de Cc: kvm@vger.kernel.org Cc: pbonzini@redhat.com Cc: rkrcmar@redhat.com Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Peter Zijlstra authored
commit 9e0e3c51 upstream. Annotate the indirect calls/jumps in the CALL_NOSPEC/JUMP_NOSPEC alternatives. Signed-off-by:
-
David Woodhouse authored
commit 87358710 upstream. Signed-off-by:
-
David Woodhouse authored
commit dd84441a upstream. Retpoline means the kernel is safe because it has no indirect branches. But firmware isn't, so use IBRS for firmware calls if it's available. Block preemption while IBRS is set, although in practice the call sites already had to be doing that. Ignore hpwdt.c for now. It's taking spinlocks and calling into firmware code, from an NMI handler. I don't want to touch that with a bargepole. Signed-off-by:
-
David Woodhouse authored
commit d1c99108 upstream. This reverts commit 1dde7415. By putting the RSB filling out of line and calling it, we waste one RSB slot for returning from the function itself, which means one fewer actual function call we can make if we're doing the Skylake abomination of call-depth counting. It also changed the number of RSB stuffings we do on vmexit from 32, which was correct, to 16. Let's just stop with the bikeshedding; it didn't actually *fix* anything anyway. Signed-off-by:
-
Jan Beulich authored
commit 8554004a upstream. Omitting suffixes from instructions in AT&T mode is bad practice when operand size cannot be determined by the assembler from register operands, and is likely going to be warned about by upstream GAS in the future (mine does already). Add the single missing suffix here. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Acked-by:
-
Jan Beulich authored
commit f2f18b16 upstream. BUG() doesn't always imply "no return", and hence should be followed by a return statement even if that's obviously (to a human) unreachable. Signed-off-by:
-
Jan Beulich authored
commit 700b7c54 upstream. Commit: df340524 ("x86/asm: Add suffix macro for GEN_*_RMWcc()") ... introduced "suffix" RMWcc operations, adding bogus clobber specifiers: For one, on x86 there's no point explicitly clobbering "cc". In fact, with GCC properly fixed, this results in an overlap being detected by the compiler between outputs and clobbers. Furthermore it seems bad practice to me to have clobber specification and use of the clobbered register(s) disconnected - it should rather be at the invocation place of that GEN_{UN,BIN}ARY_SUFFIXED_RMWcc() macros that the clobber is specified which this particular invocation needs. Drop the "cc" clobber altogether and move the "cx" one to refcount.h. Signed-off-by:
-
Jann Horn authored
commit 3b3a9268 upstream. This comment referred to a conditional call to kmemcheck_hide() that was here until commit 49502766 ("kmemcheck: remove annotations"). Now that kmemcheck has been removed, it doesn't make sense anymore. Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
-
Dominik Brodowski authored
commit ced5d0bf upstream. On some x86 CPU microarchitectures using 'xorq' to clear general-purpose registers is slower than 'xorl'. As 'xorl' is sufficient to clear all 64 bits of these registers due to zero-extension [*], switch the x86 64-bit entry code to use 'xorl'. No change in functionality and no change in code size. [*] According to Intel 64 and IA-32 Architecture Software Developer's Manual, section 3.4.1.1, the result of 32-bit operands are "zero- extended to a 64-bit result in the destination general-purpose register." The AMD64 Architecture Programmer’s Manual Volume 3, Appendix B.1, describes the same behaviour. Suggested-by:
Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180214175924.23065-3-linux@dominikbrodowski.net [ Improved on the changelog a bit. ] Signed-off-by:
-
Dominik Brodowski authored
commit 9e809d15 upstream. Play a little trick in the generic PUSH_AND_CLEAR_REGS macro to insert the GP registers "above" the original return address. This allows us to (re-)insert the macro in error_entry() and paranoid_entry() and to remove it from the idtentry macro. This reduces the static footprint significantly: text data bss dec hex filename 24307 0 0 24307 5ef3 entry_64.o-orig 20987 0 0 20987 51fb entry_64.o Co-developed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Williams authored
commit eb6174f6 upstream. The nospec.h header expects the per-architecture header file <asm/barrier.h> to optionally define array_index_mask_nospec(). Include that dependency to prevent inadvertent fallback to the default array_index_mask_nospec() implementation. The default implementation may not provide a full mitigation on architectures that perform data value speculation. Reported-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/151881605404.17395.1341935530792574707.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
Dan Williams authored
commit 1d91c1d2 upstream. There are multiple problems with the dynamic sanity checking in array_index_nospec_mask_check(): * It causes unnecessary overhead in the 32-bit case since integer sized @index values will no longer cause the check to be compiled away like in the 64-bit case. * In the 32-bit case it may trigger with user controllable input when the expectation is that should only trigger during development of new kernel enabling. * The macro reuses the input parameter in multiple locations which is broken if someone passes an expression like 'index++' to array_index_nospec(). Reported-by:
-
Paul Burton authored
commit 791412da upstream. Reading mips_cpc_base value from the DT allows each platform to define it according to its needs. This is especially convenient for MIPS_GENERIC kernel where this kind of information should be determined in runtime. Use mti,mips-cpc compatible string with just a reg property to specify the register location for your platform. Signed-off-by:
Paul Burton <paul.burton@mips.com> Signed-off-by:
Miodrag Dinic <miodrag.dinic@mips.com> Signed-off-by:
Aleksandar Markovic <aleksandar.markovic@mips.com> Cc: linux-mips@linux-mips.org Cc: Ralf Baechle <ralf@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/18513/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Paul Burton authored
commit aece34cd upstream. Document a binding for the MIPS Cluster Power Controller (CPC) that allows the device tree to specify where the CPC registers are located. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18512/Signed-off-by:
-
himanshu.madhani@cavium.com authored
commit 3efc31f7 upstream. During error test case where switch port status is toggled from enable to disable, following stack trace is seen which indicates recursion trying to send terminate exchange. This regression was introduced by commit 82de802a ("scsi: qla2xxx: Preparation for Target MQ.") BUG: stack guard page was hit at ffffb96488383ff8 (stack is ffffb96488384000..ffffb96488387fff) BUG: stack guard page was hit at ffffb964886c3ff8 (stack is ffffb964886c4000..ffffb964886c7fff) kernel stack overflow (double-fault): 0000 [#1] SMP qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] Fixes: 82de802a ("scsi: qla2xxx: Preparation for Target MQ.") Cc: <stable@vger.kernel.org> #4.10 Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
himanshu.madhani@cavium.com authored
commit d64d6c56 upstream. This patch fixes regression added by commit d7459527 ("scsi: qla2xxx: Add multiple queue pair functionality."). When driver is not able to get reqeusted IRQs from the system, driver will attempt tp clean up memory before failing hardware probe. During this cleanup, driver assigns NULL value to the pointer which has not been allocated by driver yet. This results in a NULL pointer access. Log file will show following message and stack trace qla2xxx [0000:a3:00.1]-00c7:21: MSI-X: Failed to enable support, giving up -- 32/-1. qla2xxx [0000:a3:00.1]-0037:21: Falling back-to MSI mode --1. qla2xxx [0000:a3:00.1]-003a:21: Failed to reserve interrupt 821 already in use. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffc010c4b6>] qla2x00_probe_one+0x18b6/0x2730 [qla2xxx] PGD 0 Oops: 0002 [#1] SMP Fixes: d7459527 ("scsi: qla2xxx: Add multiple queue pair functionality."). Cc: <stable@vger.kernel.org> # 4.10 Signed-off-by:
-
Dennis Wassenberg authored
commit 099fd6ca upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP ProBook 640 G2 Signed-off-by:
Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dennis Wassenberg authored
commit aea80817 upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP EliteBook 820 G3 Signed-off-by:
-
Hui Wang authored
commit d5078193 upstream. With the alc289, the Pin 0x1b is Headphone-Mic, so we should assign ALC269_FIXUP_DELL4_MIC_NO_PRESENCE rather than ALC225_FIXUP_DELL1_MIC_NO_PRESENCE to it. And this change is suggested by Kailang of Realtek and is verified on the machine. Fixes: 3f2f7c55 ("ALSA: hda - Fix headset mic detection problem for two Dell machines") Cc: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Takashi Iwai authored
commit 7bd80091 upstream. This patch is an attempt for further hardening against races between the concurrent write and ioctls. The previous fix d15d662e ("ALSA: seq: Fix racy pool initializations") covered the race of the pool initialization at writer and the pool resize ioctl by the client->ioctl_mutex (CVE-2018-1000004). However, basically this mutex should be applied more widely to the whole write operation for avoiding the unexpected pool operations by another thread. The only change outside snd_seq_write() is the additional mutex argument to helper functions, so that we can unlock / relock the given mutex temporarily during schedule() call for blocking write. Fixes: d15d662e ("ALSA: seq: Fix racy pool initializations") Reported-by:
范龙飞 <long7573@126.com> Reported-by:
Nicolai Stange <nstange@suse.de> Reviewed-and-tested-by:
-
Takashi Iwai authored
commit d8573936 upstream. This is a fix for a (sort of) fallout in the recent commit d15d662e ("ALSA: seq: Fix racy pool initializations") for CVE-2018-1000004. As the pool resize deletes the existing cells, it may lead to a race when another thread is writing concurrently, eventually resulting a UAF. A simple workaround is not to allow the pool resizing when the pool is in use. It's an invalid behavior in anyway. Fixes: d15d662e ("ALSA: seq: Fix racy pool initializations") Reported-by:
-
Dennis Wassenberg authored
commit e4c07b3b upstream. One version of Lenovo Thinkpad T570 did not use ALC298 (like other Kaby Lake devices). Instead it uses ALC292. In order to make the Lenovo dock working with that codec the dock quirk for ALC292 will be used. Signed-off-by:
-
Takashi Iwai authored
commit e312a869 upstream. The dock line-out pin (NID 0x17 of ALC3254 codec) on Dell Precision 7520 may route to three different DACs, 0x02, 0x03 and 0x06. The first two DACS have the volume amp controls while the last one doesn't. And unfortunately, the auto-parser assigns this pin to DAC3, resulting in the non-working volume control for the line out. Fix it by disabling the routing to DAC3 on the corresponding pin. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199029 Cc: <stable@vger.kernel.org> Signed-off-by:
-
Benjamin Berg authored
commit 85981dfd upstream. The internal mic boost on the T480 is too high. Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine to limit the gain. Signed-off-by:
Benjamin Berg <bberg@redhat.com> Tested-by:
-
Kailang Yang authored
commit ae104a21 upstream. This platform was only one phone Jack. Add dummy lineout verb to fix automute mode disable. This just the workaround. [ More background information: since the platform has only a headphone jack without speaker, the driver doesn't create the auto-mute control. Meanwhile we do update the headset mode via the automute hook in the driver, thus with this setup, the headset won't be updated any longer. By adding a dummy line-out pin here, the auto-mute is added by the driver, and the headset update is triggered properly. Note that this is different from the other ALC274_FIXUP_DELL_AIO_LINEOUT_VERB, which has the real line-out pin, while this quirk adds a dummy line-out pin. -- tiwai ] Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kailang Yang authored
commit 5f364135 upstream. Enable headset mode support for WYSE platform. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 36268223 upstream. As: 1) It's known that hypervisors lie about the environment anyhow (host mismatch) 2) Even if the hypervisor (Xen, KVM, VMWare, etc) provided a valid "correct" value, it all gets to be very murky when migration happens (do you provide the "new" microcode of the machine?). And in reality the cloud vendors are the ones that should make sure that the microcode that is running is correct and we should just sing lalalala and trust them. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: kvm <kvm@vger.kernel.org> Cc: Krčmář <rkrcmar@redhat.com> Cc: Borislav Petkov <bp@alien8.de> CC: "H. Peter Anvin" <hpa@zytor.com> CC: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180226213019.GE9497@char.us.oracle.comSigned-off-by:
-
Adrian Hunter authored
commit de19e5c3 upstream. trigger_on() means that the trigger is available but not ready, however trigger_on() was making it ready. That can segfault if the signal comes before trigger_ready(). e.g. (USR2 signal delivery not shown) $ perf record -e intel_pt//u -S sleep 1 perf: Segmentation fault Obtained 16 stack frames. /home/ahunter/bin/perf(sighandler_dump_stack+0x40) [0x4ec550] /lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf] /home/ahunter/bin/perf(perf_evsel__disable+0x26) [0x4b9dd6] /home/ahunter/bin/perf() [0x43a45b] /lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf] /lib/x86_64-linux-gnu/libc.so.6(__xstat64+0x15) [0x7fa7641d2cc5] /home/ahunter/bin/perf() [0x4ec6c9] /home/ahunter/bin/perf() [0x4ec73b] /home/ahunter/bin/perf() [0x4ec73b] /home/ahunter/bin/perf() [0x4ec73b] /home/ahunter/bin/perf() [0x4eca15] /home/ahunter/bin/perf(machine__create_kernel_maps+0x257) [0x4f0b77] /home/ahunter/bin/perf(perf_session__new+0xc0) [0x4f86f0] /home/ahunter/bin/perf(cmd_record+0x722) [0x43c132] /home/ahunter/bin/perf() [0x4a11ae] /home/ahunter/bin/perf(main+0x5d4) [0x427fb4] Note, for testing purposes, this is hard to hit unless you add some sleep() in builtin-record.c before record__open(). Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: stable@vger.kernel.org Fixes: 3dcc4436 ("perf tools: Introduce trigger class") Link: http://lkml.kernel.org/r/1519807144-30694-1-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Seunghun Han authored
commit b3b7c479 upstream. The check_interval file in /sys/devices/system/machinecheck/machinecheck<cpu number> directory is a global timer value for MCE polling. If it is changed by one CPU, mce_restart() broadcasts the event to other CPUs to delete and restart the MCE polling timer and __mcheck_cpu_init_timer() reinitializes the mce_timer variable. If more than one CPU writes a specific value to the check_interval file concurrently, mce_timer is not protected from such concurrent accesses and all kinds of explosions happen. Since only root can write to those sysfs variables, the issue is not a big deal security-wise. However, concurrent writes to these configuration variables is void of reason so the proper thing to do is to serialize the access with a mutex. Boris: - Make store_int_with_restart() use device_store_ulong() to filter out negative intervals - Limit min interval to 1 second - Correct locking - Massage commit message Signed-off-by:
Seunghun Han <kkamagui@gmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Tony Luck authored
commit fa94d0c6 upstream. Updating microcode used to be relatively rare. Now that it has become more common we should save the microcode version in a machine check record to make sure that those people looking at the error have this important information bundled with the rest of the logged information. [ Borislav: Simplify a bit. ] Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Michael Lyle authored
commit 86755b7a upstream. This can happen e.g. during disk cloning. This is an incomplete fix: it does not catch duplicate UUIDs earlier when things are still unattached. It does not unregister the device. Further changes to cope better with this are planned but conflict with Coly's ongoing improvements to handling device errors. In the meantime, one can manually stop the device after this has happened. Attempts to attach a duplicate device result in: [ 136.372404] loop: module loaded [ 136.424461] bcache: register_bdev() registered backing device loop0 [ 136.424464] bcache: bch_cached_dev_attach() Tried to attach loop0 but duplicate UUID already attached My test procedure is: dd if=/dev/sdb1 of=imgfile bs=1024 count=262144 losetup -f imgfile Signed-off-by:
Michael Lyle <mlyle@lyle.org> Reviewed-by:
Tang Junhui <tang.junhui@zte.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
