1. 19 Oct, 2015 20 commits
  2. 09 Oct, 2015 14 commits
    • Mathias Nyman's avatar
      xhci: give command abortion one more chance before killing xhci · 7d31f0cc
      Mathias Nyman authored
      commit a6809ffd upstream.
      
      We want to give the command abortion an additional try to stop
      the command ring before we completely hose xhci.
      Tested-by: default avatarVincent Pelletier <plr.vincent@gmail.com>
      Signed-off-by: default avatarMathias Nyman <mathias.nyman@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      [ luis: backported to 3.16:
        - xhci_handshake() has an extra 'xhci' parameter in 3.16 ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      7d31f0cc
    • Mathias Nyman's avatar
      usb: Use the USB_SS_MULT() macro to get the burst multiplier. · 9a5a9356
      Mathias Nyman authored
      commit ff30cbc8 upstream.
      
      Bits 1:0 of the bmAttributes are used for the burst multiplier.
      The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7
      into use.
      
      Use the existing USB_SS_MULT() macro instead to make sure the mult value
      and hence max packet calculations are correct for USB3.1 devices.
      
      Note that burst multiplier in bmAttributes is zero based and that
      the USB_SS_MULT() macro adds one.
      Signed-off-by: default avatarMathias Nyman <mathias.nyman@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      9a5a9356
    • Paolo Bonzini's avatar
      KVM: x86: trap AMD MSRs for the TSeg base and mask · 2f131e11
      Paolo Bonzini authored
      commit 3afb1121 upstream.
      
      These have roughly the same purpose as the SMRR, which we do not need
      to implement in KVM.  However, Linux accesses MSR_K8_TSEG_ADDR at
      boot, which causes problems when running a Xen dom0 under KVM.
      Just return 0, meaning that processor protection of SMRAM is not
      in effect.
      Reported-by: default avatarM A Young <m.a.young@durham.ac.uk>
      Acked-by: default avatarBorislav Petkov <bp@suse.de>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      [ luis: backported to 3.16:
        - file rename: arch/x86/include/asm/msr-index.h ->
          arch/x86/include/uapi/asm/msr-index.h
        - adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      2f131e11
    • Shawn Lin's avatar
      staging: ion: fix corruption of ion_import_dma_buf · 512e9d68
      Shawn Lin authored
      commit 6fa92e2b upstream.
      
      we found this issue but still exit in lastest kernel. Simply
      keep ion_handle_create under mutex_lock to avoid this race.
      
      WARNING: CPU: 2 PID: 2648 at drivers/staging/android/ion/ion.c:512 ion_handle_add+0xb4/0xc0()
      ion_handle_add: buffer already found.
      Modules linked in: iwlmvm iwlwifi mac80211 cfg80211 compat
      CPU: 2 PID: 2648 Comm: TimedEventQueue Tainted: G        W    3.14.0 #7
       00000000 00000000 9a3efd2c 80faf273 9a3efd6c 9a3efd5c 80935dc9 811d7fd3
       9a3efd88 00000a58 812208a0 00000200 80e128d4 80e128d4 8d4ae00c a8cd8600
       a8cd8094 9a3efd74 80935e0e 00000009 9a3efd6c 811d7fd3 9a3efd88 9a3efd9c
      Call Trace:
        [<80faf273>] dump_stack+0x48/0x69
        [<80935dc9>] warn_slowpath_common+0x79/0x90
        [<80e128d4>] ? ion_handle_add+0xb4/0xc0
        [<80e128d4>] ? ion_handle_add+0xb4/0xc0
        [<80935e0e>] warn_slowpath_fmt+0x2e/0x30
        [<80e128d4>] ion_handle_add+0xb4/0xc0
        [<80e144cc>] ion_import_dma_buf+0x8c/0x110
        [<80c517c4>] reg_init+0x364/0x7d0
        [<80993363>] ? futex_wait+0x123/0x210
        [<80992e0e>] ? get_futex_key+0x16e/0x1e0
        [<8099308f>] ? futex_wake+0x5f/0x120
        [<80c51e19>] vpu_service_ioctl+0x1e9/0x500
        [<80994aec>] ? do_futex+0xec/0x8e0
        [<80971080>] ? prepare_to_wait_event+0xc0/0xc0
        [<80c51c30>] ? reg_init+0x7d0/0x7d0
        [<80a22562>] do_vfs_ioctl+0x2d2/0x4c0
        [<80b198ad>] ? inode_has_perm.isra.41+0x2d/0x40
        [<80b199cf>] ? file_has_perm+0x7f/0x90
        [<80b1a5f7>] ? selinux_file_ioctl+0x47/0xf0
        [<80a227a8>] SyS_ioctl+0x58/0x80
        [<80fb45e8>] syscall_call+0x7/0x7
        [<80fb0000>] ? mmc_do_calc_max_discard+0xab/0xe4
      
      Fixes: 83271f62 ("ion: hold reference to handle...")
      Signed-off-by: default avatarShawn Lin <shawn.lin@rock-chips.com>
      Reviewed-by: default avatarLaura Abbott <labbott@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      512e9d68
    • Jenny Derzhavetz's avatar
      iser-target: remove command with state ISTATE_REMOVE · ddaaf6c2
      Jenny Derzhavetz authored
      commit a4c15cd9 upstream.
      
      As documented in iscsit_sequence_cmd:
      /*
       * Existing callers for iscsit_sequence_cmd() will silently
       * ignore commands with CMDSN_LOWER_THAN_EXP, so force this
       * return for CMDSN_MAXCMDSN_OVERRUN as well..
       */
      
      We need to silently finish a command when it's in ISTATE_REMOVE.
      This fixes an teardown hang we were seeing where a mis-behaved
      initiator (triggered by allocation error injections) sent us a
      cmdsn which was lower than expected.
      Signed-off-by: default avatarJenny Derzhavetz <jennyf@mellanox.com>
      Signed-off-by: default avatarSagi Grimberg <sagig@mellanox.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      ddaaf6c2
    • Simon Guinot's avatar
      net: mvneta: fix DMA buffer unmapping in mvneta_rx() · 72ec9d91
      Simon Guinot authored
      commit daf158d0 upstream.
      
      This patch fixes a regression introduced by the commit a84e3289
      ("net: mvneta: fix refilling for Rx DMA buffers"). Due to this commit
      the newly allocated Rx buffers are DMA-unmapped in place of those passed
      to the networking stack. Obviously, this causes data corruptions.
      
      This patch fixes the issue by ensuring that the right Rx buffers are
      DMA-unmapped.
      Reported-by: default avatarOren Laskin <oren@igneous.io>
      Signed-off-by: default avatarSimon Guinot <simon.guinot@sequanux.org>
      Fixes: a84e3289 ("net: mvneta: fix refilling for Rx DMA buffers")
      Tested-by: default avatarOren Laskin <oren@igneous.io>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      72ec9d91
    • Peter Chen's avatar
      usb: chipidea: udc: using the correct stall implementation · daf99005
      Peter Chen authored
      commit 56ffa1d1 upstream.
      
      According to spec, there are functional and protocol stalls.
      
      For functional stall, it is for bulk and interrupt endpoints,
      below are cases for it:
      - Host sends SET_FEATURE request for Set-Halt, the udc driver
      needs to set stall, and return true unconditionally.
      - The gadget driver may call usb_ep_set_halt to stall certain
      endpoints, if there is a transfer in pending, the udc driver
      should not set stall, and return -EAGAIN accordingly.
      These two kinds of stall need to be cleared by host using CLEAR_FEATURE
      request (Clear-Halt).
      
      For protocol stall, it is for control endpoint, this stall will
      be set if the control request has failed. This stall will be
      cleared by next setup request (hardware will do it).
      
      It fixed usbtest (drivers/usb/misc/usbtest.c) Test 13 "set/clear halt"
      test failure, meanwhile, this change has been verified by
      USB2 CV Compliance Test and MSC Tests.
      
      Cc: Alan Stern <stern@rowland.harvard.edu>
      Cc: Felipe Balbi <balbi@ti.com>
      Signed-off-by: default avatarPeter Chen <peter.chen@freescale.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      daf99005
    • Jeff Mahoney's avatar
      btrfs: skip waiting on ordered range for special files · 5e948e5d
      Jeff Mahoney authored
      commit a30e577c upstream.
      
      In btrfs_evict_inode, we properly truncate the page cache for evicted
      inodes but then we call btrfs_wait_ordered_range for every inode as well.
      It's the right thing to do for regular files but results in incorrect
      behavior for device inodes for block devices.
      
      filemap_fdatawrite_range gets called with inode->i_mapping which gets
      resolved to the block device inode before getting passed to
      wbc_attach_fdatawrite_inode and ultimately to inode_to_bdi.  What happens
      next depends on whether there's an open file handle associated with the
      inode.  If there is, we write to the block device, which is unexpected
      behavior.  If there isn't, we through normally and inode->i_data is used.
      We can also end up racing against open/close which can result in crashes
      when i_mapping points to a block device inode that has been closed.
      
      Since there can't be any page cache associated with special file inodes,
      it's safe to skip the btrfs_wait_ordered_range call entirely and avoid
      the problem.
      
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100911Tested-by: default avatarChristoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
      Signed-off-by: default avatarJeff Mahoney <jeffm@suse.com>
      Reviewed-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      5e948e5d
    • Filipe Manana's avatar
      Btrfs: fix read corruption of compressed and shared extents · 5c0284ae
      Filipe Manana authored
      commit 005efedf upstream.
      
      If a file has a range pointing to a compressed extent, followed by
      another range that points to the same compressed extent and a read
      operation attempts to read both ranges (either completely or part of
      them), the pages that correspond to the second range are incorrectly
      filled with zeroes.
      
      Consider the following example:
      
        File layout
        [0 - 8K]                      [8K - 24K]
            |                             |
            |                             |
         points to extent X,         points to extent X,
         offset 4K, length of 8K     offset 0, length 16K
      
        [extent X, compressed length = 4K uncompressed length = 16K]
      
      If a readpages() call spans the 2 ranges, a single bio to read the extent
      is submitted - extent_io.c:submit_extent_page() would only create a new
      bio to cover the second range pointing to the extent if the extent it
      points to had a different logical address than the extent associated with
      the first range. This has a consequence of the compressed read end io
      handler (compression.c:end_compressed_bio_read()) finish once the extent
      is decompressed into the pages covering the first range, leaving the
      remaining pages (belonging to the second range) filled with zeroes (done
      by compression.c:btrfs_clear_biovec_end()).
      
      So fix this by submitting the current bio whenever we find a range
      pointing to a compressed extent that was preceded by a range with a
      different extent map. This is the simplest solution for this corner
      case. Making the end io callback populate both ranges (or more, if we
      have multiple pointing to the same extent) is a much more complex
      solution since each bio is tightly coupled with a single extent map and
      the extent maps associated to the ranges pointing to the shared extent
      can have different offsets and lengths.
      
      The following test case for fstests triggers the issue:
      
        seq=`basename $0`
        seqres=$RESULT_DIR/$seq
        echo "QA output created by $seq"
        tmp=/tmp/$$
        status=1	# failure is the default!
        trap "_cleanup; exit \$status" 0 1 2 3 15
      
        _cleanup()
        {
            rm -f $tmp.*
        }
      
        # get standard environment, filters and checks
        . ./common/rc
        . ./common/filter
      
        # real QA test starts here
        _need_to_be_root
        _supported_fs btrfs
        _supported_os Linux
        _require_scratch
        _require_cloner
      
        rm -f $seqres.full
      
        test_clone_and_read_compressed_extent()
        {
            local mount_opts=$1
      
            _scratch_mkfs >>$seqres.full 2>&1
            _scratch_mount $mount_opts
      
            # Create a test file with a single extent that is compressed (the
            # data we write into it is highly compressible no matter which
            # compression algorithm is used, zlib or lzo).
            $XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 4K"        \
                            -c "pwrite -S 0xbb 4K 8K"        \
                            -c "pwrite -S 0xcc 12K 4K"       \
                            $SCRATCH_MNT/foo | _filter_xfs_io
      
            # Now clone our extent into an adjacent offset.
            $CLONER_PROG -s $((4 * 1024)) -d $((16 * 1024)) -l $((8 * 1024)) \
                $SCRATCH_MNT/foo $SCRATCH_MNT/foo
      
            # Same as before but for this file we clone the extent into a lower
            # file offset.
            $XFS_IO_PROG -f -c "pwrite -S 0xaa 8K 4K"         \
                            -c "pwrite -S 0xbb 12K 8K"        \
                            -c "pwrite -S 0xcc 20K 4K"        \
                            $SCRATCH_MNT/bar | _filter_xfs_io
      
            $CLONER_PROG -s $((12 * 1024)) -d 0 -l $((8 * 1024)) \
                $SCRATCH_MNT/bar $SCRATCH_MNT/bar
      
            echo "File digests before unmounting filesystem:"
            md5sum $SCRATCH_MNT/foo | _filter_scratch
            md5sum $SCRATCH_MNT/bar | _filter_scratch
      
            # Evicting the inode or clearing the page cache before reading
            # again the file would also trigger the bug - reads were returning
            # all bytes in the range corresponding to the second reference to
            # the extent with a value of 0, but the correct data was persisted
            # (it was a bug exclusively in the read path). The issue happened
            # only if the same readpages() call targeted pages belonging to the
            # first and second ranges that point to the same compressed extent.
            _scratch_remount
      
            echo "File digests after mounting filesystem again:"
            # Must match the same digests we got before.
            md5sum $SCRATCH_MNT/foo | _filter_scratch
            md5sum $SCRATCH_MNT/bar | _filter_scratch
        }
      
        echo -e "\nTesting with zlib compression..."
        test_clone_and_read_compressed_extent "-o compress=zlib"
      
        _scratch_unmount
      
        echo -e "\nTesting with lzo compression..."
        test_clone_and_read_compressed_extent "-o compress=lzo"
      
        status=0
        exit
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Reviewed-by: Qu Wenruo<quwenruo@cn.fujitsu.com>
      Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      5c0284ae
    • Carl Frederik Werner's avatar
      ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again · 2a440b8f
      Carl Frederik Werner authored
      commit 3a2fa775 upstream.
      
      Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio.
      
      According to the OMAP35x Technical Reference Manual
        CONTROL_PADCONF_I2C3_SDA[15:0]  0x480021C4 mode0: i2c3_sda
        CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170
      the pinmux address of gpio 170 must be 0x480021C6.
      
      The former wrong address broke i2c3 (used by hdmi ddc), resulting in
      kernel message:
        omap_i2c 48060000.i2c: controller timed out
      
      Fixes: 8cecf52b ("ARM: omap3-beagle.dts: add display information")
      Signed-off-by: default avatarCarl Frederik Werner <frederik@cfbw.eu>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      2a440b8f
    • Thomas Hellstrom's avatar
      drm/vmwgfx: Fix up user_dmabuf refcounting · 3c0e3ab2
      Thomas Hellstrom authored
      commit 54c12bc3 upstream.
      
      If user space calls unreference on a user_dmabuf it will typically
      kill the struct ttm_base_object member which is responsible for the
      user-space visibility. However the dmabuf part may still be alive and
      refcounted. In some situations, like for shared guest-backed surface
      referencing/opening, the driver may try to reference the
      struct ttm_base_object member again, causing an immediate kernel warning
      and a later kernel NULL pointer dereference.
      
      Fix this by always maintaining a reference on the struct
      ttm_base_object member, in situations where it might subsequently be
      referenced.
      Signed-off-by: default avatarThomas Hellstrom <thellstrom@vmware.com>
      Reviewed-by: default avatarBrian Paul <brianp@vmware.com>
      Reviewed-by: default avatarSinclair Yeh <syeh@vmware.com>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      3c0e3ab2
    • Liu.Zhao's avatar
      USB: option: add ZTE PIDs · c918c41d
      Liu.Zhao authored
      commit 19ab6bc5 upstream.
      
      This is intended to add ZTE device PIDs on kernel.
      Signed-off-by: default avatarLiu.Zhao <lzsos369@163.com>
      [johan: sort the new entries ]
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      c918c41d
    • Guenter Roeck's avatar
      spi: Fix documentation of spi_alloc_master() · 2b43a460
      Guenter Roeck authored
      commit a394d635 upstream.
      
      Actually, spi_master_put() after spi_alloc_master() must _not_ be followed
      by kfree(). The memory is already freed with the call to spi_master_put()
      through spi_master_class, which registers a release function. Calling both
      spi_master_put() and kfree() results in often nasty (and delayed) crashes
      elsewhere in the kernel, often in the networking stack.
      
      This reverts commit eb4af0f5.
      
      Link to patch and concerns: https://lkml.org/lkml/2012/9/3/269
      or
      http://lkml.iu.edu/hypermail/linux/kernel/1209.0/00790.html
      
      Alexey Klimov: This revert becomes valid after
      94c69f76 when spi-imx.c
      has been fixed and there is no need to call kfree() so comment
      for spi_alloc_master() should be fixed.
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarAlexey Klimov <alexey.klimov@linaro.org>
      Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      2b43a460
    • Tan, Jui Nee's avatar
      spi: spi-pxa2xx: Check status register to determine if SSSR_TINT is disabled · 6e32c6db
      Tan, Jui Nee authored
      commit 02bc933e upstream.
      
      On Intel Baytrail, there is case when interrupt handler get called, no SPI
      message is captured. The RX FIFO is indeed empty when RX timeout pending
      interrupt (SSSR_TINT) happens.
      
      Use the BIOS version where both HSUART and SPI are on the same IRQ. Both
      drivers are using IRQF_SHARED when calling the request_irq function. When
      running two separate and independent SPI and HSUART application that
      generate data traffic on both components, user will see messages like
      below on the console:
      
        pxa2xx-spi pxa2xx-spi.0: bad message state in interrupt handler
      
      This commit will fix this by first checking Receiver Time-out Interrupt,
      if it is disabled, ignore the request and return without servicing.
      Signed-off-by: default avatarTan, Jui Nee <jui.nee.tan@intel.com>
      Acked-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
      Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      6e32c6db
  3. 06 Oct, 2015 6 commits
    • Eric W. Biederman's avatar
      vfs: Test for and handle paths that are unreachable from their mnt_root · 15b19896
      Eric W. Biederman authored
      commit 397d425d upstream.
      
      In rare cases a directory can be renamed out from under a bind mount.
      In those cases without special handling it becomes possible to walk up
      the directory tree to the root dentry of the filesystem and down
      from the root dentry to every other file or directory on the filesystem.
      
      Like division by zero .. from an unconnected path can not be given
      a useful semantic as there is no predicting at which path component
      the code will realize it is unconnected.  We certainly can not match
      the current behavior as the current behavior is a security hole.
      
      Therefore when encounting .. when following an unconnected path
      return -ENOENT.
      
      - Add a function path_connected to verify path->dentry is reachable
        from path->mnt.mnt_root.  AKA to validate that rename did not do
        something nasty to the bind mount.
      
        To avoid races path_connected must be called after following a path
        component to it's next path component.
      Signed-off-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      15b19896
    • Eric W. Biederman's avatar
      dcache: Handle escaped paths in prepend_path · a75ff8a8
      Eric W. Biederman authored
      commit cde93be4 upstream.
      
      A rename can result in a dentry that by walking up d_parent
      will never reach it's mnt_root.  For lack of a better term
      I call this an escaped path.
      
      prepend_path is called by four different functions __d_path,
      d_absolute_path, d_path, and getcwd.
      
      __d_path only wants to see paths are connected to the root it passes
      in.  So __d_path needs prepend_path to return an error.
      
      d_absolute_path similarly wants to see paths that are connected to
      some root.  Escaped paths are not connected to any mnt_root so
      d_absolute_path needs prepend_path to return an error greater
      than 1.  So escaped paths will be treated like paths on lazily
      unmounted mounts.
      
      getcwd needs to prepend "(unreachable)" so getcwd also needs
      prepend_path to return an error.
      
      d_path is the interesting hold out.  d_path just wants to print
      something, and does not care about the weird cases.  Which raises
      the question what should be printed?
      
      Given that <escaped_path>/<anything> should result in -ENOENT I
      believe it is desirable for escaped paths to be printed as empty
      paths.  As there are not really any meaninful path components when
      considered from the perspective of a mount tree.
      
      So tweak prepend_path to return an empty path with an new error
      code of 3 when it encounters an escaped path.
      Signed-off-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      a75ff8a8
    • Arnaldo Carvalho de Melo's avatar
      perf header: Fixup reading of HEADER_NRCPUS feature · 708cd70f
      Arnaldo Carvalho de Melo authored
      commit caa47047 upstream.
      
      The original patch introducing this header wrote the number of CPUs available
      and online in one order and then swapped those values when reading, fix it.
      
      Before:
      
        # perf record usleep 1
        # perf report --header-only | grep 'nrcpus \(online\|avail\)'
        # nrcpus online : 4
        # nrcpus avail : 4
        # echo 0 > /sys/devices/system/cpu/cpu2/online
        # perf record usleep 1
        # perf report --header-only | grep 'nrcpus \(online\|avail\)'
        # nrcpus online : 4
        # nrcpus avail : 3
        # echo 0 > /sys/devices/system/cpu/cpu1/online
        # perf record usleep 1
        # perf report --header-only | grep 'nrcpus \(online\|avail\)'
        # nrcpus online : 4
        # nrcpus avail : 2
      
      After the fix, bringing back the CPUs online:
      
        # perf report --header-only | grep 'nrcpus \(online\|avail\)'
        # nrcpus online : 2
        # nrcpus avail : 4
        # echo 1 > /sys/devices/system/cpu/cpu2/online
        # perf record usleep 1
        # perf report --header-only | grep 'nrcpus \(online\|avail\)'
        # nrcpus online : 3
        # nrcpus avail : 4
        # echo 1 > /sys/devices/system/cpu/cpu1/online
        # perf record usleep 1
        # perf report --header-only | grep 'nrcpus \(online\|avail\)'
        # nrcpus online : 4
        # nrcpus avail : 4
      Acked-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Cc: Adrian Hunter <adrian.hunter@intel.com>
      Cc: Borislav Petkov <bp@suse.de>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Kan Liang <kan.liang@intel.com>
      Cc: Stephane Eranian <eranian@google.com>
      Cc: Wang Nan <wangnan0@huawei.com>
      Fixes: fbe96f29 ("perf tools: Make perf.data more self-descriptive (v8)")
      Link: http://lkml.kernel.org/r/20150911153323.GP23511@kernel.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      708cd70f
    • Luis Henriques's avatar
      zram: fix possible use after free in zcomp_create() · 1c91ff98
      Luis Henriques authored
      commit 3aaf14da upstream.
      
      zcomp_create() verifies the success of zcomp_strm_{multi,single}_create()
      through comp->stream, which can potentially be pointing to memory that
      was freed if these functions returned an error.
      
      While at it, replace a 'ERR_PTR(-ENOMEM)' by a more generic
      'ERR_PTR(error)' as in the future zcomp_strm_{multi,siggle}_create()
      could return other error codes.  Function documentation updated
      accordingly.
      
      Fixes: beca3ec7 ("zram: add multi stream functionality")
      Acked-by: default avatarSergey Senozhatsky <sergey.senozhatsky@gmail.com>
      Acked-by: default avatarMinchan Kim <minchan@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      1c91ff98
    • Kyle Evans's avatar
      hp-wmi: limit hotkey enable · 8836aeff
      Kyle Evans authored
      commit 8a1513b4 upstream.
      
      Do not write initialize magic on systems that do not have
      feature query 0xb. Fixes Bug #82451.
      
      Redefine FEATURE_QUERY to align with 0xb and FEATURE2 with 0xd
      for code clearity.
      
      Add a new test function, hp_wmi_bios_2008_later() & simplify
      hp_wmi_bios_2009_later(), which fixes a bug in cases where
      an improper value is returned. Probably also fixes Bug #69131.
      
      Add missing __init tag.
      Signed-off-by: default avatarKyle Evans <kvans32@gmail.com>
      Signed-off-by: default avatarDarren Hart <dvhart@linux.intel.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      8836aeff
    • Mathias Krause's avatar
      hp-wmi: Add missing __init annotations to initialization code · 0fd2d1d4
      Mathias Krause authored
      commit 702ef542 upstream.
      
      These functions are only called from other initialization routines, so
      can be marked __init, too.
      Signed-off-by: default avatarMathias Krause <minipli@googlemail.com>
      Signed-off-by: default avatarMatthew Garrett <matthew.garrett@nebula.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      0fd2d1d4