- 03 Jul, 2006 16 commits
-
-
Paul Mackerras authored
-
Benjamin Herrenschmidt authored
Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Kumar Gala authored
-
Kim Phillips authored
Provide default configuration for the Freescale MPC8349E-mITX board, including the on-board 16MB flash. Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Kim Phillips authored
Added support for the Freescale MPC8343e-mITX board. Currently based on the 8343 SYS code. The 2nd PHY (5-port switch) and SATA are untested (work in progress). Signed-off-by:
-
Kim Phillips authored
Signed-off-by:
-
Benjamin Herrenschmidt authored
This adds the new irq remapper core and removes the old one. Because there are some fundamental conflicts with the old code, like the value of NO_IRQ which I'm now setting to 0 (as per discussions with Linus), etc..., this commit also changes the relevant platform and driver code over to use the new remapper (so as not to cause difficulties later in bisecting). This patch removes the old pre-parsing of the open firmware interrupt tree along with all the bogus assumptions it made to try to renumber interrupts according to the platform. This is all to be handled by the new code now. For the pSeries XICS interrupt controller, a single remapper host is created for the whole machine regardless of how many interrupt presentation and source controllers are found, and it's set to match any device node that isn't a 8259. That works fine on pSeries and avoids having to deal with some of the complexities of split source controllers vs. presentation controllers in the pSeries device trees. The powerpc i8259 PIC driver now always requests the legacy interrupt range. It also has the feature of being able to match any device node (including NULL) if passed no device node as an input. That will help porting over platforms with broken device-trees like Pegasos who don't have a proper interrupt tree. Signed-off-by:
-
Benjamin Herrenschmidt authored
This copies the i8259 interrupt controller driver from arch/powerpc to arch/ppc. It's currently shared by both architectures, but the upcoming arch/powerpc interrupt changes will break the arch/ppc builds. The changes are too important to just use #ifdef's in the driver. Signed-off-by:
-
Benjamin Herrenschmidt authored
Adds new routines to prom_parse to walk the device-tree for interrupt information. This includes both direct mapping of interrupts and low level parsing functions for use with partial trees. Signed-off-by:
-
Benjamin Herrenschmidt authored
This adapts the generic powerpc interrupt handling code, and all of the platforms except for the embedded 6xx machines, to use the new genirq framework. Signed-off-by:
-
Benjamin Herrenschmidt authored
Make the fasteoi handler mark disabled interrupts as pending if they happen anyway. This allow implementation of a delayed disable scheme with the fasteoi handler. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Benjamin Herrenschmidt authored
Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by:
-
Benjamin Herrenschmidt authored
Previously we weren't checking for failures in translating device addresses from the firmware. Signed-off-by:
-
Benjamin Herrenschmidt authored
This extends the maple device-tree workarounds to work on the Apache board as well, and extends the maple platform probing code to recognize the Apache board. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch fixes various issues with offb (the default fbdev used on powerpc when no proper fbdev is supported). It was broken when using BootX under some circumstances and would fail to properly get the framebuffer base address in others. Signed-off-by:
-
Paul Mackerras authored
Signed-off-by:
-
- 02 Jul, 2006 24 commits
-
-
Dave Jones authored
(Only fails with -Werror-implicit-function-declaration, but it should still be fixed). arch/powerpc/platforms/cell/setup.c:145: error: implicit declaration of function 'udbg_init_rtas_console' Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Jeremy Kerr authored
Change the get_property() function to return a void *. This allows us to later remove the cast done in the majority of callers. Built for pseries, iseries, pmac32, cell, cbesim, g5, systemsim, maple, and mpc* defconfigs Signed-off-by:
Jeremy Kerr <jk@ozlabs.org> Acked-by:
-
Dominik Hackl authored
This fixes a bug in fs/nfs which makes it impossible to build nfs without having procfs enabled. Signed-off-by:
Dominik Hackl <dominik@hackl.dhs.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits) [ARM] 3683/2: ARM: Convert at91rm9200 to generic irq handling [ARM] 3682/2: ARM: Convert ixp4xx to generic irq handling [ARM] 3702/1: ARM: Convert ixp23xx to generic irq handling [ARM] 3701/1: ARM: Convert plat-omap to generic irq handling [ARM] 3700/1: ARM: Convert lh7a40x to generic irq handling [ARM] 3699/1: ARM: Convert s3c2410 to generic irq handling [ARM] 3698/1: ARM: Convert sa1100 to generic irq handling [ARM] 3697/1: ARM: Convert shark to generic irq handling [ARM] 3696/1: ARM: Convert clps711x to generic irq handling [ARM] 3694/1: ARM: Convert ecard driver to generic irq handling [ARM] 3693/1: ARM: Convert omap1 to generic irq handling [ARM] 3691/1: ARM: Convert imx to generic irq handling [ARM] 3688/1: ARM: Convert clps7500 to generic irq handling [ARM] 3687/1: ARM: Convert integrator to generic irq handling [ARM] 3685/1: ARM: Convert pxa to generic irq handling [ARM] 3684/1: ARM: Convert l7200 to generic irq handling [ARM] 3681/1: ARM: Convert ixp2000 to generic irq handling [ARM] 3680/1: ARM: Convert footbridge to generic irq handling [ARM] 3695/1: ARM drivers/pcmcia: Fixup includes [ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes ... Manual conflict resolved in kernel/irq/handle.c (butt-ugly ARM tickless code).
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 3541/2: workaround for PXA27x erratum E7 [ARM] nommu: provide a way for correct control register value selection [ARM] 3705/1: add supersection support to ioremap() [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency [ARM] 3703/1: Add help description for ARCH_EP80219 [ARM] 3678/1: MMC: Make OMAP MMC work [ARM] 3677/1: OMAP: Update H2 defconfig [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1 [ARM] Add section support to ioremap [ARM] Fix sa11x0 SDRAM selection [ARM] Set bit 4 on section mappings correctly depending on CPU [ARM] 3666/1: TRIZEPS4 [1/5] core ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE ARM: OMAP: Update dmtimers ARM: OMAP: Make clock variables static ARM: OMAP: Fix GPMC compilation when DEBUG is defined ARM: OMAP: Mux updates for external DMA and GPIO ...
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] sdhci: version bump sdhci [MMC] sdhci: support controller specific quirks [MMC] sdhci: more DMA capabilities tests [MMC] sdhci: reset sdhci controller early [MMC] sdhci: check controller version [MMC] sdhci: check only relevant inhibit bits [MMC] sdhci: Test for invalid block size [MMC] sdhci: Avoid sdhci DMA boundaries [MMC] Fix sdhci PIO routines [MMC] sdhci: fix interrupt handling [MMC] sdhci: correct register order [MMC] sdhci: proper timeout handling [MMC] sdhci: fix sdhci reset timeout [MMC] sdhci: fix timeout loops in sdhci [MMC] sdhci: support for multiple voltages [MMC] sdhci: print device id [MMC] sdhci: check SDHCI base clock
-
Thomas Gleixner authored
Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
