- 27 Mar, 2010 13 commits
-
-
Emil Tantilov authored
Previously the driver tweaked txqueuelen to avoid false Tx hang reports seen at half duplex. This had the effect of overriding user set values on link change/reset. Testing shows that adjusting only the timeout factor is sufficient to prevent Tx hang reports at half duplex. This patch removes all instances of tx_queue_len in the driver. Based on e1000e patch by Franco Fichtner <franco@lastsummer.de> CC: Franco Fichtner <franco@lastsummer.de> Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Acked-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
When cache is unresolved, c->mf[6]c_parent is set to 65535 and minvif, maxvif are not initialized, hence we must avoid to parse IIF and OIF. A second problem can happen when the user dumps a cache entry where a VIF, that was referenced at creation time, has been removed. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Greg Rose authored
When running the offline diagnostic tests check to see if any VFs are online. If so then only run the link test. This is necessary because the VFs running in guest VMs aren't aware of when the PF is taken offline for a diagnostic test. Also put a message to the system log telling the system administrator to take the VFs offline manually if (s)he wants to run a full diagnostic. Return 1 on each of the tests not run to alert the user of the condition. Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
-
Alexander Duyck authored
igb was previously checking the wrong bits in the MANC register to determine if managability was enabled. As a result it was incorrectly powering down and resetting the phy when it didn't need to. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
wzt wzt authored
Fix the following warnings: be_ethtool.c:493: warning: integer constant is too large for 'long' type be_ethtool.c:493: warning: integer constant is too large for 'long' type Signed-off-by:
Zhitong Wang <zhitong.wangzt@alibaba-inc.com> Acked-by:
Ajit Khaparde <ajitk@serverengines.com> Signed-off-by:
-
Brandon L Black authored
Add new flag MSG_WAITFORONE for the recvmmsg() syscall. When this flag is specified for a blocking socket, recvmmsg() will only block until at least 1 packet is available. The default behavior is to block until all vlen packets are available. This flag has no effect on non-blocking sockets or when used in combination with MSG_DONTWAIT. Signed-off-by:
Brandon L Black <blblack@gmail.com> Acked-by:
Ulrich Drepper <drepper@redhat.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Emil Tantilov authored
Previously the driver tweaked txqueuelen to avoid false Tx hang reports seen at half duplex. This had the effect of overriding user set values on link change/reset. Testing shows that adjusting only the timeout factor is sufficient to prevent Tx hang reports at half duplex. This patch removes all instances of tx_queue_len in the driver. Originally reported and patched by Franco Fichtner CC: Franco Fichtner <franco@lastsummer.de> Signed-off-by:
-
Emil Tantilov authored
Previously the driver tweaked txqueuelen to avoid false Tx hang reports seen at half duplex. This had the effect of overriding user set values on link change/reset. Testing shows that adjusting only the timeout factor is sufficient to prevent Tx hang reports at half duplex. Based on e1000e patch by Franco Fichtner <franco@lastsummer.de> CC: Franco Fichtner <franco@lastsummer.de> Signed-off-by:
-
Pavel Emelyanov authored
The the rebuild changes the genid which in turn is used at the hash calculation. Thus if we don't restart and go on with inserting the rt will happen in wrong chain. (Fixed Neil's comment about the index passed into the rt_intern_hash) Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Reviewed-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Pavel Emelyanov authored
There's no need in getting it 3 times and gcc isn't smart enough to understand this himself. This is just a cleanup before the fix (next patch). Signed-off-by:
-
Patrick McHardy authored
When a dump is interrupted at the last device in a hash chain and then continued, "idx" won't get incremented past s_idx, so s_ip_idx is not reset when moving on to the next device. This means of all following devices only the last n - s_ip_idx addresses are dumped. Tested-by:
Pawel Staszewski <pstaszewski@itcare.pl> Signed-off-by:
Patrick McHardy <kaber@trash.net>
-
Kyle McMartin authored
Acked-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
-
Ben Menchaca authored
Fix undo of reserve() before RX recycle gfar_new_skb reserve()s space in the SKB to align it. If an error occurs, and the skb needs to be returned to the RX recycle queue, the current code attempts to reset head, but did not reset tail. This patch remembers the alignment amount, and reverses the reserve() when needed. Signed-off-by:
Ben Menchaca <ben@bigfootnetworks.com> Signed-off-by:
-
- 26 Mar, 2010 13 commits
-
-
Chris Leech authored
During FCF solicitation, the switch is supposed to pad the solicited advertisement out to the endpoints specified maximum FCoE frame size. That means that we need to receive FIP frames that are larger than the standard MTU. To make sure the receive queue is configured correctly, we should be filtering FIP traffic into the FCoE queues. Signed-off-by:
Chris Leech <christopher.leech@intel.com> Signed-off-by:
-
Robert Love authored
Currently FIP (FCoE Initialization Protocol) frames are going untagged. This causes various problems with FCFs (switches) that have negotiated a priority over dcbx. This patch tags FIP frames with the same priority as the FCoE frames. Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Robert Love authored
If the user buffer count was 256 the shift would place a 1 in the offset region leading to errors. It also overwrites the uers buffer list. This patch makes sure that at most 256 user buffers are allowed for DDP and the buffer count is masked properly such that it doesn't overwrite the offset when shifting the bits. Signed-off-by:
Yi Zou <yi.zou@intel.com> Signed-off-by:
Frank Zhang <frank_1.zhang@intel.com> Signed-off-by:
-
John Fastabend authored
In the last patch I missed an unecessary min_t comparison. This patch removes it, the path allocates at most 72 tx queues for 82599 and 24 for 82598 there is no need for this check. Additionally this sets MAX_[TX|RX]_QUEUES to 72. Which is used as the size for the tx/rx_ring arrays. There is no reason to have more tx_rings/rx_rings then num_tx_queues. Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
Greg Rose authored
The clear_to_send flag is being cleared before the call to ping all the VFs. It should be called after pinging all the VFs. Signed-off-by:
-
Greg Rose authored
VFs running in guest VMs do not respond in as timely a manner to PF indication it is going down as they do when running in the host domain. If the adapter is in SR-IOV mode insert a two second delay to guarantee that all VFs have had time to respond to the PF reset. In any case resetting the PF while VFs are active should be discouraged but if it must be done then there will be a two second delay to help synchronize resets among the PF and all the VFs. Signed-off-by:
-
Greg Rose authored
In the Tx mapping function if a DMA error occurred then the unwind of previously mapped sections would improperly check an unsigned int if it was less than zero. Changed the index variable to signed to avoid the error. Signed-off-by:
-
Amit Kumar Salecha authored
Signed-off-by:
Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by:
-
Amit Kumar Salecha authored
Signed-off-by:
-
Amit Kumar Salecha authored
Signed-off-by:
-
Amit Kumar Salecha authored
Bios sub version from unified fw image is calculated incorrect. Signed-off-by:
-
David S. Miller authored
This reverts commit 35317688. People are reporting problems due to this change and there is no anticipation that the cause will be tracked down any time soon. We can try next time to selectively re-enable this based upon chip type, or have a black list of some sort. Signed-off-by:
-
David S. Miller authored
Signed-off-by:
-
- 25 Mar, 2010 10 commits
-
-
Jon Maloy authored
Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Henne authored
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x55e37): Section mismatch in reference from the function elsa_cs_config() to the function .devinit.text:hisax_init_pcmcia() The function elsa_cs_config() references the function __devinit hisax_init_pcmcia(). This is often because elsa_cs_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by:
Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by:
Karsten Keil <keil@b1-systems.de> Signed-off-by:
-
Henne authored
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x56512): Section mismatch in reference from the function avma1cs_config() to the function .devinit.text:hisax_init_pcmcia() The function avma1cs_config() references the function __devinit hisax_init_pcmcia(). This is often because avma1cs_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by:
-
Henne authored
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x56bfb): Section mismatch in reference from the function teles_cs_config() to the function .devinit.text:hisax_init_pcmcia() The function teles_cs_config() references the function __devinit hisax_init_pcmcia(). This is often because teles_cs_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by:
-
Henne authored
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x558d6): Section mismatch in reference from the function sedlbauer_config() to the function .devinit.text:hisax_init_pcmcia() The function sedlbauer_config() references the function __devinit hisax_init_pcmcia(). This is often because sedlbauer_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by:
-
David S. Miller authored
Clear, don't set, ANAR_ASMDIR in this case. Noticed by Roel Kluin. Signed-off-by: -
-
Eric Dumazet authored
A missing break statement in hashlimit_ipv6_mask(), and masks between /64 and /95 are not working at all... Signed-off-by:
-
Jozsef Kadlecsik authored
The order of the IPv6 raw table is currently reversed, that makes impossible to use the NOTRACK target in IPv6: for example if someone enters ip6tables -t raw -A PREROUTING -p tcp --dport 80 -j NOTRACK and if we receive fragmented packets then the first fragment will be untracked and thus skip nf_ct_frag6_gather (and conntrack), while all subsequent fragments enter nf_ct_frag6_gather and reassembly will never successfully be finished. Singed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Eric Dumazet authored
If dl_seq_start() memory allocation fails, we crash later in dl_seq_stop(), trying to kfree(ERR_PTR(-ENOMEM)) Signed-off-by:
-
- 24 Mar, 2010 4 commits
-
-
Dan Carpenter authored
The original code saved the error value but just returned 0 in the end. Signed-off-by:
Dan Carpenter <error27@gmail.com> Acked-by:
Jamal Hadi Salim <hadi@mojatatu.com> Signed-off-by:
-
Alexander Duyck authored
The dma map fields in the skb_shared_info structure no longer has any users and can be dropped since it is making the skb_shared_info unecessarily larger. Running slabtop show that we were using 4K slabs for the skb->head on x86_64 w/ an allocation size of 1522. It turns out that the dma_head and dma_maps array made skb_shared large enough that we had crossed over the 2k boundary with standard frames and as such we were using 4k blocks of memory for all skbs. Signed-off-by:
-
Vasu Dev authored
Updates real_num_tx_queues in case underlying real device has changed real_num_tx_queues. -v2 As per Eric Dumazet<eric.dumazet@gmail.com> comment:- -- adds BUG_ON to catch case of real_num_tx_queues exceeding num_tx_queues. -- created this self contained patch to just update real_num_tx_queues. Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
-
Vasu Dev authored
This is required to correctly select vlan tx queue for a driver supporting multi tx queue with ndo_select_queue implemented since currently selected vlan tx queue is unaligned to selected queue by real net_devce ndo_select_queue. Unaligned vlan tx queue selection causes thrash with higher vlan tx lock contention for least fcoe traffic and wrong socket tx queue_mapping for ixgbe having ndo_select_queue implemented. -v2 As per Eric Dumazet<eric.dumazet@gmail.com> comments, mirrored vlan net_device_ops to have them with and without vlan_dev_select_queue and then select according to real dev ndo_select_queue present or not for a vlan net_device. This is to completely skip vlan_dev_select_queue calling for real net_device not supporting ndo_select_queue. Signed-off-by:
-
