- 27 Aug, 2015 3 commits
-
-
Viswas G authored
In Nexus reset the device state request are not needed. Signed-off-by:
Viswas G <Viswas.G@pmcs.com> Reviewed-by:
Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by:
Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com>
-
Viswas G authored
Updated 12G linkrate to libsas. Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Jack Wang authored
Company has policy to use company email address, so update my email address to company address. Signed-off-by:
-
- 26 Aug, 2015 30 commits
-
-
Sebastian Herbszt authored
Use logical instead of bitwise AND. Signed-off-by:
Sebastian Herbszt <herbszt@gmx.de> Reviewed-by:
James Smart <james.smart@avagotech.com> Signed-off-by:
-
Dilip Kumar Uppugandla authored
Invoking get_cmd_state for qla2xxx always returns 0. Instead change it to return the actual fabric state from qla_tgt_cmd. This will help with debugging. Signed-off-by:
Dilip Kumar Uppugandla <dilip@purestorage.com> Signed-off-by:
Spencer Baugh <sbaugh@catern.com> Acked-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
-
Don Brace authored
The driver is calling hpsa_shutdown before calling scsi_remove_host. hpsa_shutdown is disabling interrupts. scsi_remove_host can trigger I/O operations, such as SYNCHRONIZE CACHE when multipath is enabled which hang the system. Call scsi_remove_host before calling hpsa_shutdown. Reviewed-by:
Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by:
Scott Teel <scott.teel@pmcs.com> Reviewed-by:
Don Brace <don.brace@pmcs.com> Signed-off-by:
-
shane.seymour authored
A regression was introduced into the hpsa driver a while back so non-zero LUNs of multi-LUN devices may no longer be presented via a SAS based Smart Array. I have not done a bisection to discover the change that caused it. The CISS firmware specification (available on sourceforge) defines an 8 byte lunid that describes devices that the Smart Array can see/present to the system. The current code in the hpsa driver attempts to find matches for non-zero LUNs with LUN 0 for a bus/target by zeroing out byte 4 of the lunid and find a match. This method is sufficient for SCSI based Smart Arrays because byte 5 is always 0. For SAS based Smart arrays byte 5 of the lunid contains the path number for a multipath device and either one or two bits (the documentation does not define how many bits are used but it appears it may be one only) that indicate if the given path number in byte 5 must always be used to access that device. Byte 5 may not always be zero. The following are lunids (spaces added for clarity) for a MSL2024 single drive library connected via a H241 Smart Array: 00 00 00 00 01 00 00 01 (changer) 00 00 00 00 00 80 00 01 (tape) In the 4th byte (counting from 0) you can see that the tape is LUN 0 and the changer is LUN 1. The 0x80 set in the 5th byte for the tape drive means the driver should force access to path 0 (the library in this case was connected to one path only anyway). After the changes we can see the following in the dmesg output: scsi 0:3:0:0: RAID HP H241 1.18 \ PQ: 0 ANSI: 5 scsi 0:2:0:0: Sequential-Access HP Ultrium 6-SCSI 354W \ PQ: 0 ANSI: 6 scsi 0:2:0:1: Medium Changer HP MSL G3 Series 8.70 \ PQ: 0 ANSI: 5 Showing that the changer is correctly identified as LUN 1 of bus 2 target 0. Before the change the changer device is not seen. Suggested-by:
shane.seymour <shane.seymour@hp.com> Reviewed-by:
-
Scott Benesh authored
prevent adding volumes that are not available. Reviewed-by:
Justin Lindley <justin.lindley@pmcs.com> Reviewed-by:
-
Kevin Barnett authored
Reviewed-by:
-
Don Brace authored
Reviewed-by:
-
Don Brace authored
showing that tables have been updated unnecessarily. Reviewed-by:
-
Joe Handzik authored
host no, bus, target, lun, scsi_device_type for hba mode add: box and bay information report if the path is active/inactive Reviewed-by:
-
Don Brace authored
need to add PMC to copyright notice and update the Hewlett-Packard copyright notification. Reviewed-by:
-
Don Brace authored
Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Don Brace authored
Reported-by:
-
Don Brace authored
Reported-by:
-
Sreekanth Reddy authored
Driver crashes if the BIOS do not set up at least one memory I/O resource. This failure can happen if the device is too slow to respond during POST and is missed by the BIOS, but Linux then detects the device later in the boot process. Based on a patch from Timothy Pearson <tpearson@raptorengineeringinc.com> Signed-off-by:
Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by:
-
Bart Van Assche authored
Surround conditional locking statements with "#ifndef __CHECKER__" / "#endif" to hide these for the sparse static source code analysis tool. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Acked-by:
-
Bart Van Assche authored
The "return QLA_SUCCESS" statement just above the "fw_load_failed" label cannot be reached, hence remove it. Additionally remove the "else" keyword since the code block below the if-statement ends with a return statement. Signed-off-by:
-
Bart Van Assche authored
Avoid that smatch reports the following warning: drivers/scsi/qla2xxx/qla_attr.c:1081: qla2x00_model_desc_show() warn: this array is probably non-NULL. 'vha->hw->model_desc' Signed-off-by:
-
Bart Van Assche authored
This patch removes 21 casts between an __iomem pointer type and another data type but also introduces five new casts (see also the casts with "__force"). Although this patch does not change any functionality, IMHO the code with __force casts needs further review. Signed-off-by:
-
Bart Van Assche authored
Signed-off-by:
-
Bart Van Assche authored
Whether htonl() or __constant_htonl() is used, if the argument is a constant the conversion happens at compile time. Hence leave out the __constant_ prefix for this and other endianness conversion functions. This improves source code readability. [jejb: checkpatch fixes] Signed-off-by:
-
Bart Van Assche authored
Replace the QLA82XX_ADDR_IN_RANGE() and QLA8044_ADDR_IN_RANGE() macros with the inline function addr_in_range(). This avoids that the compiler reports the following warning when building with W=1: comparison of unsigned expression >= 0 is always true. Signed-off-by:
-
Bart Van Assche authored
Detected these variables by building with W=1. Signed-off-by:
-
Bart Van Assche authored
Signed-off-by:
-
Bart Van Assche authored
Let the debug statement in qlafx00_tm_iocb_entry() report both rsp_info and rsp_info_len instead of reporting rsp_info_len twice. Signed-off-by:
-
Johannes Thumshirn authored
Destroy st_index_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by:Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Hannes Reinecke <hare@suse.de> Acked-by:
Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
Bjorn Helgaas authored
Fix whitespace and indentation errors. No code change. [jejb: checkpatch fixes] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by:
-
Bjorn Helgaas authored
Use dev_printk() when possible to make messages more useful. Signed-off-by:
-
Bjorn Helgaas authored
Use dev_printk() when possible to make messages more useful. Signed-off-by:
-
Hannes Reinecke authored
Log the ALUA state change unit attention correctly with the message log and emit an event to allow user-space tools to react to it. Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
-
Dan Carpenter authored
These are signed values the come from the user, we put a cap on the upper bounds but not on the lower bounds. We use "karg.dataSgeOffset" to calculate "sz". We verify "sz" and proceed as if that means that "karg.dataSgeOffset" is correct but this fails to consider that the "sz" calculations can have integer overflows. Signed-off-by:
-
- 12 Aug, 2015 7 commits
-
-
Vitaly Kuznetsov authored
Comment in struct Scsi_Host says that drivers are not supposed to access __devices directly. storvsc_host_scan() doesn't happen in irq context so we can just use shost_for_each_device(). Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Long Li <longli@microsoft.com> Acked-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Under the 'default' case in scmnd->sc_data_direction we have 3 options: - DMA_NONE which we handle correctly. - DMA_BIDIRECTIONAL which is never supposed to be set by SCSI stack. - Garbage value. Do WARN() and return -EINVAL in the last two cases. virtio_scsi does BUG_ON() here but it looks like an overkill. Reported-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Seymour, Shane M authored
Convert DRIVER_ATTR macros to DRIVER_ATTR_RO requested by Greg KH. Also switched to using scnprintf instead of snprintf per Documentation/filesystems/sysfs.txt. Suggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
linux authored
Support HighPoint RR36xx HBAs which are based on Marvell Frey. Support SAS tape and SAS media changer. [jejb: remove now unused label] Signed-off-by:
HighPoint Linux Team <linux@highpoint-tech.com> Reviewed-by:
-
Seymour, Shane M authored
This patch changes the st driver to use attribute groups so driver sysfs files are created automatically. See the following for reference: http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/Signed-off-by:
-
Alexey Khoroshilov authored
Resources allocated within bfad_im_port_index idr are not deallocated on module unload. The patch adds idr_destroy() in exit function. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by:
-
Bart Van Assche authored
Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
-
