Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ai_fifo_buffer[]` element of `struct
ni_board_struct` and the types of various local variables from `short`
to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change the type of the `data` variable in `labpc_ai_cmd()` from `short`
to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented by unsigned values.
Change the type of the `dma_buffer` member of `struct a2150_private`
from `s16 *` to `uint16_t *`, and change the type of the `dpnt` variable
in `a2150_interrupt()` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change the types of various variables in the "me4000" driver dealing
with samples to use unsigned types for consistency.

Also replace the `long` or `unsigned long` variables used to handle
32-bit register values to `unsigned int`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ao_data[]` member of `struct
icp_multi_private` from `short` to `unsigned short` for consistency.

Also remove the `ai_data` and `di_data` members as they are not used.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ao_readback[]` member of `struct
fl512_private` from `short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change the type of the `data` variable in `dt3k_ai_empty_fifo()` from
`short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change various members of `struct dt282x_private` and various parameters
and variables dealing with samples to use `unsigned short` instead of
`short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented by unsigned values.
Change the type of the `ao_update_bits` member of `struct
das1800_private` and the types of various local variables used to hold
sample values from `short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ai_buffer[]` member of `struct
das16m1_private_struct` and the types used by `munge_sample()` and
`munge_sample_array()` from `short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change the type of the `data` variable in `das16_ai_munge()` from `short
*` to `unsigned short *` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are unsigned.  Change the element type of
`ao_bounce_buffer[]` in `struct pcidas64_private` from `short` to
`unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented by unsigned values.
Change the element types of `ai_buffer[]`, `ao_buffer[]` and
`ao_value[]` in `struct cb_pcidas_private` to `unsigned short` for
consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Replace all uses of `short` to handle sample values in the
"amplc_pci230" driver with `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change the type of the `ao_scan_vals` member of `struct pci224_private`
from `short *` to `unsigned short *` for consistency.  Also change the
type of the `array` variable in `pci224_ao_munge()` from `short *` to
`unsigned short *`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ao_data[]` member of `struct
pci1723_private` from `short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ao_data[]` member of `struct
pci1710_private` from `short` to `unsigned short` for consistency.  Also
remove the `ai_data` member as it is only assigned to.  Change various
local variables used to hold sample values to `unsigned short`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change the `ao_data[]` and `dmabuf_virt[]` members of `struct
pci9118_private` and various local variables dealing with sample values
to use `unsigned short` instead of `short` for consistency.

Also remove the `short *ai_data` member of `struct pci9118_private` as
it is only assigned to.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ai_bounce_buffer[]` member of `struct
pci9111_private_data` from `short` to `unsigned short` for consistency.
Also change the type of the `array` variable in `pci9111_ai_munge()`
from `short *` to `unsigned short *`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
Change the element type of `ul_DmaBufferVirtual[2]` in `struct
addi_private` from `short *` to `unsigned short *` for consistency.
Note that several ADDI-DATA drivers use this struct from
"addi_common.h", but only the "addi_apci_3120" driver uses this member.
Also change the type of the `dma_buffer` parameter of
`v_APCI3120_InterruptDmaMoveBlock16bit()` from `short *` to `unsigned
short *`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
`subdev_8255_interrupt()` calls `comedi_buf_put()` with a `short` data
value merely because that's what was previously expected.  Since it now
expects an `unsigned short`, change it here for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
`cfc_write_to_buffer()` in "comedi_fc.h" currently uses `short` to hold
a 16-bit sample value to be written to the buffer.  Change the type of
the parameter to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sample values in comedi are generally represented as unsigned values.
`comedi_buf_put()` and `comedi_buf_get()` use a `short` to hold the
16-bit data value being transferred to or from the comedi buffer.
Change them to use `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace with struct vnt_tx_fifo_head and attach pbyBuf to
adwTxKey[0]
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

White space clean up.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow switch fall-through of duplicate case.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Set the two TX fall back rates in s_bPacketToWirelessUsb and
pass to private area of driver in variables tx_rate_fb0
and tx_rate_fb1 from the wFB_Opt0/wFB_Opt1 array.

Apply these rates were needed in the TX structure and
remove byFBOption settings in s_uGetRTSCTSDuration.

This greatly simplifies s_uGetRTSCTSDuration and
more future flexibility of setting rates from
upper levels of driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes use of deprecated header <asm/io.h> in staging:dgnc:dgnc_cls.c
Signed-off-by: Archana kumari <archanakumari959@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl script error:
ERROR: do not use C99 // comments
+static long ieee80211_translate_todbm(u8 signal_strength_index)// 0-100
index.
Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix sparse warnings in static function in driver rtl8192u
Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As per coding style,C99 comments are not allowed
also, the formal header contained empty space and
redundant information that's right there in the function
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As per coding style, C99 comments are not allowed
removed some redundant information and empty space
Left the parameter descriptions because the
parameter list is long and cryptic looking
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As per coding style, C99 comments are not allowed
removed some redundant information and empty space
Left the parameter descriptions because the
parameter list is long and cryptic looking
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As per coding style,C99 comments are not allowed
also, the formal header contained empty space and
redundant information that's right there in the function
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As per coding style,C99 comments are not allowed
also, the formal header contained empty space and
redundant information that's right there in the function
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following Sparse Warnings in btmtk_usb.c:

drivers/staging/btmtk_usb/btmtk_usb.c:676:39: warning: incorrect type in assignment (different base types)
drivers/staging/btmtk_usb/btmtk_usb.c:676:39:    expected unsigned int [unsigned] [usertype] packet_header
drivers/staging/btmtk_usb/btmtk_usb.c:676:39:    got restricted __le32 [usertype] <noident>

drivers/staging/btmtk_usb/btmtk_usb.c:736:31: warning: incorrect type in assignment (different base types)
drivers/staging/btmtk_usb/btmtk_usb.c:736:31:    expected unsigned int [unsigned] [addressable] [usertype] packet_header
drivers/staging/btmtk_usb/btmtk_usb.c:736:31:    got restricted __le32 [usertype] <noident>
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed whitespace related errors and warnings by removing
unnecessary spaces before new line in the quoted string
and spaces at start of any line or before tab to comply
with the coding style.
Signed-off-by: Nandini Hanumanthagowda <nandu.hgowda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed spaces around operators where it was not required
as per coding style
Added spaces around operators where it was necessary as
per coding style
Signed-off-by: Nandini Hanumanthagowda <nandu.hgowda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes commenting style in xlr_net.c mentioned in
drivers:staging:netlogic:TODO file
Signed-off-by: Archana kumari <archanakumari959@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix build errors when GPIO_CS5535=m and FB_OLPC_DCON=y
by preventing that kconfig combination.

These build errors are caused by having a kconfig bool symbol
(FB_OLPC_DCON_1) that depend on a tristate symbol (GPIO_CS5535),
but when the tristate symbol is =m, the bool symbol is =y.

  drivers/built-in.o: In function `dcon_read_status_xo_1':
  olpc_dcon_xo_1.c:(.text+0x359531): undefined reference to `cs5535_gpio_set'
  drivers/built-in.o: In function `dcon_wiggle_xo_1':
  olpc_dcon_xo_1.c:(.text+0x35959f): undefined reference to `cs5535_gpio_set'
  olpc_dcon_xo_1.c:(.text+0x359610): undefined reference to `cs5535_gpio_clear'
  drivers/built-in.o:olpc_dcon_xo_1.c:(.text+0x3596a1): more undefined references to `cs5535_gpio_clear' follow
  drivers/built-in.o: In function `dcon_wiggle_xo_1':
  olpc_dcon_xo_1.c:(.text+0x359708): undefined reference to `cs5535_gpio_set'
  drivers/built-in.o: In function `dcon_init_xo_1':
  olpc_dcon_xo_1.c:(.text+0x35989b): undefined reference to `cs5535_gpio_clear'
  olpc_dcon_xo_1.c:(.text+0x3598b5): undefined reference to `cs5535_gpio_isset'
  olpc_dcon_xo_1.c:(.text+0x359963): undefined reference to `cs5535_gpio_setup_event'
  olpc_dcon_xo_1.c:(.text+0x359980): undefined reference to `cs5535_gpio_set_irq'
  olpc_dcon_xo_1.c:(.text+0x359a36): undefined reference to `cs5535_gpio_set'

However, adding GPIO_CS5535 to the Kconfig dependencies also creates
a kconfig recursive dependency error on powerpc:
  drivers/i2c/Kconfig:5:error: recursive dependency detected!
  drivers/i2c/Kconfig:5:	symbol I2C is selected by FB_OLPC_DCON
  drivers/staging/olpc_dcon/Kconfig:1:	symbol FB_OLPC_DCON depends on GPIO_CS5535
  drivers/gpio/Kconfig:577:	symbol GPIO_CS5535 depends on GPIOLIB
  drivers/gpio/Kconfig:38:	symbol GPIOLIB is selected by ARCH_REQUIRE_GPIOLIB
  drivers/gpio/Kconfig:23:	symbol ARCH_REQUIRE_GPIOLIB is selected by MCU_MPC8349EMITX
  arch/powerpc/platforms/Kconfig:351:	symbol MCU_MPC8349EMITX depends on I2C

This is due to FB_OLPC_DCON selecting I2C instead of depending on it,
so change the select to a dependency.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc:	Daniel Drake <dsd@laptop.org>
Cc:	Jens Frederich <jfrederich@gmail.com>
Cc:	Jon Nettleton <jon.nettleton@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>