- 08 Sep, 2014 1 commit
-
-
Russell King authored
When unbinding imx-drm, the following oops was observed: Unable to handle kernel NULL pointer dereference at virtual address 00000004 pgd = e995c000 [00000004] *pgd=4fea5831 Internal error: Oops: 817 [#1] SMP ARM Modules linked in: bnep rfcomm bluetooth nfsd exportfs hid_cypress brcmfmac brcmutil snd_soc_fsl_ssi snd_soc_fsl_spdif imx_pcm_fiq imx_pcm_dma snd_soc_sgtl5000 imx_sdma imx2_wdt imx_ldb(C) imx_thermal snd_soc_imx_sgtl5000 snd_soc_imx_spdif snd_soc_imx_audmux CPU: 1 PID: 779 Comm: bash Tainted: G C 3.16.0-rc2+ #1230 task: ea9eb180 ti: ea378000 task.ti: ea378000 PC is at ipu_dp_put+0x10/0x18 LR is at ipu_plane_dpms+0x60/0x8c pc : [<c0350d20>] lr : [<c04bd9e8>] psr: 200f0013 sp : ea379d80 ip : ea379d90 fp : ea379d8c r10: 00100100 r9 : 00000000 r8 : 00200200 r7 : e9ba0264 r6 : e9ba01f8 r5 : 00000000 r4 : ea34b800 r3 : 00000000 r2 : 00000000 r1 : 0000009b r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 3995c04a DAC: 00000015 Process bash (pid: 779, stack limit = 0xea378240) Stack: (0xea379d80 to 0xea37a000) ... Backtrace: [<c0350d10>] (ipu_dp_put) from [<c04bd9e8>] (ipu_plane_dpms+0x60/0x8c) [<c04bd988>] (ipu_plane_dpms) from [<c04bda40>] (ipu_disable_plane+0x2c/0x60) [<c04bda14>] (ipu_disable_plane) from [<c04bda9c>] (ipu_plane_destroy+0x28/0x60) [<c04bda74>] (ipu_plane_destroy) from [<c033ff84>] (drm_mode_config_cleanup+0x1b8/0x250) [<c033fdcc>] (drm_mode_config_cleanup) from [<c04bc234>] (imx_drm_driver_unload+0x44/0x4c) [<c04bc1f0>] (imx_drm_driver_unload) from [<c03394a4>] (drm_dev_unregister+0x2c/0xa0) [<c0339478>] (drm_dev_unregister) from [<c0339f8c>] (drm_put_dev+0x30/0x6c) [<c0339f5c>] (drm_put_dev) from [<c04bc1cc>] (imx_drm_unbind+0x14/0x18) [<c04bc1b8>] (imx_drm_unbind) from [<c03530b4>] (component_master_del+0xbc/0xd8) ... Code: e1a0c00d e92dd800 e24cb004 e3a03000 (e5c03004) This is caused by a missing check in ipu_plane_dpms for a NULL pointer. Fixes: b8d181e4 ("staging: drm/imx: add drm plane support") Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 01 Sep, 2014 5 commits
-
-
Linus Torvalds authored
-
git://github.com/czankel/xtensa-linuxLinus Torvalds authored
Pull Xtensa updates from Chris Zankel: "Xtensa improvements for 3.17: - support highmem on cores with aliasing data cache. Enable highmem on kc705 by default - simplify addition of new core variants (no need to modify Kconfig / Makefiles) - improve robustness of unaligned access handler and its interaction with window overflow/underflow exception handlers - deprecate atomic and spill registers syscalls - clean up Kconfig: remove orphan MATH_EMULATION, sort 'select' statements - wire up renameat2 syscall. Various fixes: - fix address checks in dma_{alloc,free}_coherent (runtime BUG) - fix access to THREAD_RA/THREAD_SP/THREAD_DS (debug build breakage) - fix TLBTEMP_BASE_2 region handling in fast_second_level_miss (runtime unrecoverable exception) - fix a6 and a7 handling in fast_syscall_xtensa (runtime userspace register clobbering) - fix kernel/user jump out of fast_unaligned (potential runtime unrecoverabl exception) - replace termios IOCTL code definitions with constants (userspace build breakage)" * tag 'xtensa-20140830' of git://github.com/czankel/xtensa-linux: (25 commits) xtensa: deprecate fast_xtensa and fast_spill_registers syscalls xtensa: don't allow overflow/underflow on unaligned stack xtensa: fix a6 and a7 handling in fast_syscall_xtensa xtensa: allow single-stepping through unaligned load/store xtensa: move invalid unaligned instruction handler closer to its users xtensa: make fast_unaligned store restartable xtensa: add double exception fixup handler for fast_unaligned xtensa: fix kernel/user jump out of fast_unaligned xtensa: configure kc705 for highmem xtensa: support highmem in aliasing cache flushing code xtensa: support aliasing cache in kmap xtensa: support aliasing cache in k[un]map_atomic xtensa: implement clear_user_highpage and copy_user_highpage xtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_miss xtensa: allow fixmap and kmap span more than one page table xtensa: make fixmap region addressing grow with index xtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DS xtensa: add renameat2 syscall xtensa: fix address checks in dma_{alloc,free}_coherent xtensa: replace IOCTL code definitions with constants ...
-
Guenter Roeck authored
unicore32 builds fail with arch/unicore32/kernel/signal.c: In function ‘setup_frame’: arch/unicore32/kernel/signal.c:257: error: ‘usig’ undeclared (first use in this function) arch/unicore32/kernel/signal.c:279: error: ‘usig’ undeclared (first use in this function) arch/unicore32/kernel/signal.c: In function ‘handle_signal’: arch/unicore32/kernel/signal.c:306: warning: unused variable ‘tsk’ arch/unicore32/kernel/signal.c: In function ‘do_signal’: arch/unicore32/kernel/signal.c:376: error: implicit declaration of function ‘get_signsl’ make[1]: *** [arch/unicore32/kernel/signal.o] Error 1 make: *** [arch/unicore32/kernel/signal.o] Error 2 Bisect points to commit 649671c9 ("unicore32: Use get_signal() signal_setup_done()"). This code never even compiled. Reverting the patch does not work, since previously used functions no longer exist, so try to fix it up. Compile tested only. Fixes: 649671c9 ("unicore32: Use get_signal() signal_setup_done()") Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Various assorted fixes: - a couple of patches from Mark Rutland to resolve an errata with Cortex-A15 CPUs. - fix cpuidle for the CPU part ID changes in the last merge window - add support for a relocation which ARM binutils is generating in some circumstances" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8130/1: cpuidle/cpuidle-big_little: fix reading cpu id part number ARM: 8129/1: errata: work around Cortex-A15 erratum 830321 using dummy strex ARM: 8128/1: abort: don't clear the exclusive monitors ARM: 8127/1: module: add support for R_ARM_TARGET1 relocations
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Here's the weekly batch of fixes from arm-soc. The delta is a largeish negative delta, due to revert of SMP support for Broadcom's STB SoC -- it was accidentally merged before some issues had been addressed, so they will make a new attempt for 3.18. I didn't see a need for a full revert of the whole platform due to this, we're keeping the rest enabled. The rest is mostly: - a handful of DT fixes for i.MX (Hummingboard/Cubox-i in particular) - some MTD/NAND fixes for OMAP - minor DT fixes for shmobile - warning fix for UP builds on vexpress/spc There's also a couple of patches that wires up hwmod on TI's DRA7 SoC so it can boot. Drivers and the rest had landed for 3.17, and it's small and isolated so it made sense to pick up now even if it's not a bugfix" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) vexpress/spc: fix a build warning on array bounds ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants MAINTAINERS: catch special Rockchip code locations ARM: dts: microsom-ar8035: MDIO pad must be set open drain ARM: dts: omap54xx-clocks: Fix the l3 and l4 clock rates ARM: brcmstb: revert SMP support ARM: OMAP2+: hwmod: Rearm wake-up interrupts for DT when MUSB is idled ARM: dts: Enable UART wake-up events for beagleboard ARM: dts: Remove twl6030 clk32g "regulator" ARM: OMAP2+: omap_device: remove warning that clk alias already exists ARM: OMAP: fix %d confusingly prefixed with 0x in format string ARM: dts: DRA7: fix interrupt-cells for GPIO mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc() ARM: dts: omap3430-sdp: Revert to using software ECC for NAND ARM: OMAP2+: GPMC: Support Software ECC scheme via DT mtd: nand: omap: Revert to using software ECC by default ARM: dts: hummingboard/cubox-i: change SPDIF output to be more descriptive ARM: dts: hummingboard/cubox-i: add USB OC pinctrl configuration ARM: shmobile: r8a7791: add missing 0x0100 for SDCKCR ...
-
- 31 Aug, 2014 7 commits
-
-
Alex Shi authored
With ARCH_VEXPRESS_SPC option, kernel build has the following warning: arch/arm/mach-vexpress/spc.c: In function ‘ve_spc_clk_init’: arch/arm/mach-vexpress/spc.c:431:38: warning: array subscript is below array bounds [-Warray-bounds] struct ve_spc_opp *opps = info->opps[cluster]; ^ since 'cluster' maybe '-1' in UP system. This patch does a active checking to fix this issue. Signed-off-by: Alex Shi <alex.shi@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'for-v3.17-rc/omap-dra72x-d74x-support-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes Pull "ARM: OMAP2+: DRA72x/DRA74x basic support" from Tony Lindgren: Add basic subarchitecture support for the DRA72x and DRA74x. These are OMAP2+ derivative SoCs. This should be low-risk to existing OMAP platforms. Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/hwmod-a-early-v3.17-rc/20140827194314/ * tag 'for-v3.17-rc/omap-dra72x-d74x-support-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi bugfixes from Mark Brown: "A smattering of bug fixes for the SPI subsystem, all in driver code which has seen active work recently and none of them with any great global impact. There's also a new ACPI ID for the pxa2xx driver which required no code changes and the addition of kerneldoc for some structure fields that were missing it and generating warnings during documentation builds as a result" * tag 'spi-v3.17-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: sh-msiof: Fix transmit-only DMA transfers spi/rockchip: Avoid accidentally turning off the clock spi: dw: fix kernel crash due to NULL pointer dereference spi: dw-pci: fix bug when regs left uninitialized spi: davinci: fix SPI_NO_CS functionality spi/rockchip: fixup incorrect dma direction setting spi/pxa2xx: Add ACPI ID for Intel Braswell spi: spi-au1550: fix build failure spi: rspi: Fix leaking of unused DMA descriptors spi: sh-msiof: Fix leaking of unused DMA descriptors spi: Add missing kerneldoc bits spi/omap-mcspi: Fix the spi task hangs waiting dma_rx
-
Mark Brown authored
-
Mark Brown authored
spi: Bug fixes for v3.17 A smattering of bug fixes for the SPI subsystem, all in driver code which has seen active work recently and none of them with any great global impact. There's also a new ACPI ID for the pxa2xx driver which required no code changes and the addition of kerneldoc for some structure fields that were missing it and generating warnings during documentation builds as a result. # gpg: Signature made Sun 31 Aug 2014 13:19:12 BST using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
Geert Uytterhoeven authored
Fix tx/rx mixup, which broke transmit-only transfers. Introduced by commit 4240305f7cbdc7782aa8bc40cc702775d9ac0839 ("spi: sh-msiof: Fix leaking of unused DMA descriptors"). Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
git://git.samba.org/jlayton/linuxLinus Torvalds authored
Pull file locking bugfx from Jeff Layton: "Just a bugfix for a bug that crept in to v3.15. It's in a rather rare error path, and I'm not aware of anyone having hit it, but it's worth fixing for v3.17" * tag 'locks-v3.17-3' of git://git.samba.org/jlayton/linux: locks: pass correct "before" pointer to locks_unlink_lock in generic_add_lease
-
- 30 Aug, 2014 4 commits
-
-
Mark Brown authored
Merge remote-tracking branches 'spi/fix/au1550', 'spi/fix/davinci', 'spi/fix/doc', 'spi/fix/dw', 'spi/fix/omap-mcspi', 'spi/fix/pxa2xx', 'spi/fix/rockchip' and 'spi/fix/rspi' into spi-linus
-
Mark Brown authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Peter Anvin: "One patch to avoid assigning interrupts we don't actually have on non-PC platforms, and two patches that addresses bugs in the new IOAPIC assignment code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, irq, PCI: Keep IRQ assignment for runtime power management x86: irq: Fix bug in setting IOAPIC pin attributes x86: Fix non-PC platform kernel crash on boot due to NULL dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: - Fix for an ACPI regression related to the handling of fixed events that caused netlink routines to be (incorrectly) run in interrupt context from Lan Tianyu - Fix for an ACPI EC driver regression on Acer Aspire V5-573G that caused AC/battery plug/unplug and video brightness change notifications to be delayed on that machine from Lv Zheng - Fix for an ACPI device enumeration regression that caused ACPI driver probe to fail for some devices where it succeeded before (Rafael J Wysocki) - intel_pstate driver fix to prevent it from printing an information message for every CPU in the system on every boot from Andi Kleen - s5pv210 cpufreq driver fix to remove an __init annotation from a routine that in fact can be called at any time after init too from Mark Brown - New Intel Braswell device ID for the ACPI LPSS (Low-Power Subsystem) driver from Alan Cox - New Intel Braswell CPU ID for intel_pstate from Mika Westerberg * tag 'pm+acpi-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: s5pv210: Remove spurious __init annotation cpufreq: intel_pstate: Add CPU ID for Braswell processor intel_pstate: Turn per cpu printk into pr_debug ACPI / LPSS: Add ACPI IDs for Intel Braswell ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set ACPI: Run fixed event device notifications in process context ACPI / scan: Allow ACPI drivers to bind to PNP device objects
-
- 29 Aug, 2014 23 commits
-
-
Linus Torvalds authored
Merge patches from Andrew Morton: "22 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) kexec: purgatory: add clean-up for purgatory directory Documentation/kdump/kdump.txt: add ARM description flush_icache_range: export symbol to fix build errors tools: selftests: fix build issue with make kselftests target ocfs2: quorum: add a log for node not fenced ocfs2: o2net: set tcp user timeout to max value ocfs2: o2net: don't shutdown connection when idle timeout ocfs2: do not write error flag to user structure we cannot copy from/to x86/purgatory: use approprate -m64/-32 build flag for arch/x86/purgatory drivers/rtc/rtc-s5m.c: re-add support for devices without irq specified xattr: fix check for simultaneous glibc header inclusion kexec: remove CONFIG_KEXEC dependency on crypto kexec: create a new config option CONFIG_KEXEC_FILE for new syscall x86,mm: fix pte_special versus pte_numa hugetlb_cgroup: use lockdep_assert_held rather than spin_is_locked mm/zpool: use prefixed module loading zram: fix incorrect stat with failed_reads lib: turn CONFIG_STACKTRACE into an actual option. mm: actually clear pmd_numa before invalidating memblock, memhotplug: fix wrong type in memblock_find_in_range_node(). ...
-
Michael Welling authored
Without this patch the kexec-purgatory.c and purgatory.ro files are not removed after make mrproper. Signed-off-by: Michael Welling <mwelling@ieee.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
HuKeping authored
Add arm specific parts to kdump kernel documentation. Signed-off-by: Hu Keping <hukeping@huawei.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Haren Myneni <hbabu@us.ibm.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Pranith Kumar authored
Fix building errors occuring due to a missing export of flush_icache_range() in kisskb.ellerman.id.au/kisskb/buildresult/11677809/ ERROR: "flush_icache_range" [drivers/misc/lkdtm.ko] undefined! Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Noam Camus <noamc@ezchip.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Zhigang Lu <zlu@tilera.com> [tile] Cc: Kirill Tkhai <tkhai@yandex.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Phong Tran authored
Fix the typo of ARCH when running 'make kselftests'. Change the 'X86' to 'x86'. Test by compilation. Signed-off-by: Phong Tran <tranmanphong@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Junxiao Bi authored
For debug use, we can see from the log whether the fence decision is made and why it is not fenced. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Junxiao Bi authored
When tcp retransmit timeout(15mins), the connection will be closed. Pending messages may be lost during this time. So we set tcp user timeout to override the retransmit timeout to the max value. This is OK for ocfs2 since we have disk heartbeat, if peer crash, the disk heartbeat will timeout and it will be evicted, if disk heartbeat not timeout and connection idle for a long time, then this means the cluster enters split-brain state, since fence can't happen, we'd better keep the connection and wait network recover. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Junxiao Bi authored
This patch series is to fix a possible message lost bug in ocfs2 when network go bad. This bug will cause ocfs2 hung forever even network become good again. The messages may lost in this case. After the tcp connection is established between two nodes, an idle timer will be set to check its state periodically, if no messages are received during this time, idle timer will timeout, it will shutdown the connection and try to reconnect, so pending messages in tcp queues will be lost. This messages may be from dlm. Dlm may get hung in this case. This may cause the whole ocfs2 cluster hung. This is very possible to happen when network state goes bad. Do the reconnect is useless, it will fail if network state is still bad. Just waiting there for network recovering may be a good idea, it will not lost messages and some node will be fenced until cluster goes into split-brain state, for this case, Tcp user timeout is used to override the tcp retransmit timeout. It will timeout after 25 days, user should have notice this through the provided log and fix the network, if they don't, ocfs2 will fall back to original reconnect way. This patch (of 3): Some messages in the tcp queue maybe lost if we shutdown the connection and reconnect when idle timeout. If packets lost and reconnect success, then the ocfs2 cluster maybe hung. To fix this, we can leave the connection there and do the fence decision when idle timeout, if network recover before fence dicision is made, the connection survive without lost any messages. This bug can be saw when network state go bad. It may cause ocfs2 hung forever if some packets lost. With this fix, ocfs2 will recover from hung if network becomes good again. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ben Hutchings authored
If we failed to copy from the structure, writing back the flags leaks 31 bits of kernel memory (the rest of the ir_flags field). In any case, if we cannot copy from/to the structure, why should we expect putting just the flags to work? Also make sure ocfs2_info_handle_freeinode() returns the right error code if the copy_to_user() fails. Fixes: ddee5cdb ('Ocfs2: Add new OCFS2_IOC_INFO ioctl for ocfs2 v8.') Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Joel Becker <jlbec@evilplan.org> Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Vivek Goyal authored
Thomas reported that build of x86_64 kernel was failing for him. He is using 32bit tool chain. Problem is that while compiling purgatory, I have not specified -m64 flag. And 32bit tool chain must be assuming -m32 by default. Following is error message. (mini) [~/work/linux-2.6] make scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config/kernel.release UPD include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h UPD include/generated/utsrelease.h CC arch/x86/purgatory/purgatory.o arch/x86/purgatory/purgatory.c:1:0: error: code model 'large' not supported in the 32 bit mode Fix it by explicitly passing appropriate -m64/-m32 build flag for purgatory. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Tested-by: Thomas Glanzmann <thomas@glanzmann.de> Suggested-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Bartlomiej Zolnierkiewicz authored
The rtc-s5m driver used to support devices without irq specified in the past. Re-add this support. The patch fixes boot for Insignal's Exynos4412 based Origen board. Error messages before the patch: ... Unable to handle kernel NULL pointer dereference at virtual address 00000094 pgd = c0004000 [00000094] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-next-20140804-00008-ga59480f-dirty #701 task: ea80f000 ti: ea882000 task.ti: ea882000 PC is at regmap_irq_get_virq+0x0/0x28 LR is at s5m_rtc_probe+0xdc/0x310 pc : [<c02574fc>] lr : [<c02de75c>] psr: 80000153 sp : ea883e48 ip : 00000000 fp : 00000000 r10: 0000000c r9 : c05de7ac r8 : eaabc600 r7 : eaa6b4d0 r6 : c0439e8c r5 : eaabc610 r4 : eab30e50 r3 : 00000000 r2 : 00000000 r1 : 0000000c r0 : 00000000 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xea882240) Backtrace: regmap_irq_get_virq s5m_rtc_probe platform_drv_probe driver_probe_device __driver_attach bus_for_each_dev bus_add_driver driver_register do_one_initcall kernel_init_freeable kernel_init ---[ end trace a954d7f019122700 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Filipe Brandenburger authored
The guard was introduced in commit ea1a8217 ("xattr: guard against simultaneous glibc header inclusion") but it is using #ifdef to check for a define that is either set to 1 or 0. Fix it to use #if instead. * Without this patch: $ { echo "#include <sys/xattr.h>"; echo "#include <linux/xattr.h>"; } | gcc -E -Iinclude/uapi - >/dev/null include/uapi/linux/xattr.h:19:0: warning: "XATTR_CREATE" redefined [enabled by default] #define XATTR_CREATE 0x1 /* set value, fail if attr already exists */ ^ /usr/include/x86_64-linux-gnu/sys/xattr.h:32:0: note: this is the location of the previous definition #define XATTR_CREATE XATTR_CREATE ^ * With this patch: $ { echo "#include <sys/xattr.h>"; echo "#include <linux/xattr.h>"; } | gcc -E -Iinclude/uapi - >/dev/null (no warnings) Signed-off-by: Filipe Brandenburger <filbranden@google.com> Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Cc: Allan McRae <allan@archlinux.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Vivek Goyal authored
New system call depends on crypto. As it did not have a separate config option, CONFIG_KEXEC was modified to select CRYPTO and CRYPTO_SHA256. But now previous patch introduced a new config option for new syscall. So CONFIG_KEXEC does not require crypto. Remove that dependency. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Vivek Goyal authored
Currently new system call kexec_file_load() and all the associated code compiles if CONFIG_KEXEC=y. But new syscall also compiles purgatory code which currently uses gcc option -mcmodel=large. This option seems to be available only gcc 4.4 onwards. Hiding new functionality behind a new config option will not break existing users of old gcc. Those who wish to enable new functionality will require new gcc. Having said that, I am trying to figure out how can I move away from using -mcmodel=large but that can take a while. I think there are other advantages of introducing this new config option. As this option will be enabled only on x86_64, other arches don't have to compile generic kexec code which will never be used. This new code selects CRYPTO=y and CRYPTO_SHA256=y. And all other arches had to do this for CONFIG_KEXEC. Now with introduction of new config option, we can remove crypto dependency from other arches. Now CONFIG_KEXEC_FILE is available only on x86_64. So whereever I had CONFIG_X86_64 defined, I got rid of that. For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to "depends on CRYPTO=y". This should be safer as "select" is not recursive. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Tested-by: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Sasha Levin has shown oopses on ffffea0003480048 and ffffea0003480008 at mm/memory.c:1132, running Trinity on different 3.16-rc-next kernels: where zap_pte_range() checks page->mapping to see if PageAnon(page). Those addresses fit struct pages for pfns d2001 and d2000, and in each dump a register or a stack slot showed d2001730 or d2000730: pte flags 0x730 are PCD ACCESSED PROTNONE SPECIAL IOMAP; and Sasha's e820 map has a hole between cfffffff and 100000000, which would need special access. Commit c46a7c81 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") has broken vm_normal_page(): a PROTNONE SPECIAL pte no longer passes the pte_special() test, so zap_pte_range() goes on to try to access a non-existent struct page. Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE). A hint that this was a problem was that c46a7c81 added pte_numa() test to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast path: This was papering over a pte_special() snag when the zero page was encountered during zap. This patch reverts vm_normal_page() to how it was before, relying on pte_special(). It still appears that this patch may be incomplete: aren't there other places which need to be handling PROTNONE along with PRESENT? For example, pte_mknuma() clears _PAGE_PRESENT and sets _PAGE_NUMA, but on a PROT_NONE area, that would make it pte_special(). This is side-stepped by the fact that NUMA hinting faults skipped PROT_NONE VMAs and there are no grounds where a NUMA hinting fault on a PROT_NONE VMA would be interesting. Fixes: c46a7c81 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: <stable@vger.kernel.org> [3.16] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
spin_lock may be an empty struct for !SMP configurations and so arch_spin_is_locked may return unconditional 0 and trigger the VM_BUG_ON even when the lock is held. Replace spin_is_locked by lockdep_assert_held. We will not BUG anymore but it is questionable whether crashing makes a lot of sense in the uncharge path. Uncharge happens after the last page reference was released so nobody should touch the page and the function doesn't update any shared state except for res counter which uses synchronization of its own. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kees Cook authored
To avoid potential format string expansion via module parameters, do not use the zpool type directly in request_module() without a format string. Additionally, to avoid arbitrary modules being loaded via zpool API (e.g. via the zswap_zpool_type module parameter) add a "zpool-" prefix to the requested module, as well as module aliases for the existing zpool types (zbud and zsmalloc). Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Chao Yu authored
Since we allocate a temporary buffer in zram_bvec_read to handle partial page operations in commit 924bd88d ("Staging: zram: allow partial page operations"), our ->failed_reads value may be incorrect as we do not increase its value when failing to allocate the temporary buffer. Let's fix this issue and correct the annotation of failed_reads. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Jones authored
I was puzzled why /proc/$$/stack had disappeared, until I figured out I had disabled the last debug option that did a 'select STACKTRACE'. This patch makes the option show up at config time, so it can be enabled without enabling any of the more heavyweight debug options. Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Matthew Wilcox authored
Commit 67f87463 ("mm: clear pmd_numa before invalidating") cleared the NUMA bit in a copy of the PMD entry, but then wrote back the original Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Tang Chen authored
In memblock_find_in_range_node(), we defined ret as int. But it should be phys_addr_t because it is used to store the return value from __memblock_find_range_bottom_up(). The bug has not been triggered because when allocating low memory near the kernel end, the "int ret" won't turn out to be negative. When we started to allocate memory on other nodes, and the "int ret" could be minus. Then the kernel will panic. A simple way to reproduce this: comment out the following code in numa_init(), memblock_set_bottom_up(false); and the kernel won't boot. Reported-by: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Tested-by: Xishi Qiu <qiuxishi@huawei.com> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Vivek Goyal authored
Richard and Daniel reported that UML is broken due to changes to resource traversal functions. Problem is that iomem_resource.child can be null and new code does not consider that possibility. Old code used a for loop and that loop will not even execute if p was null. Revert back to for() loop logic and bail out if p is null. I also moved sibling_only check out of resource_lock. There is no reason to keep it inside the lock. Following is backtrace of the UML crash. RIP: 0033:[<0000000060039b9f>] RSP: 0000000081459da0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000219b3fff RCX: 000000006010d1d9 RDX: 0000000000000001 RSI: 00000000602dfb94 RDI: 0000000081459df8 RBP: 0000000081459de0 R08: 00000000601b59f4 R09: ffffffff0000ff00 R10: ffffffff0000ff00 R11: 0000000081459e88 R12: 0000000081459df8 R13: 00000000219b3fff R14: 00000000602dfb94 R15: 0000000000000000 Kernel panic - not syncing: Segfault with no mm CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-10454-g58d08e3b #13 Stack: 00000000 000080d0 81459df0 219b3fff 81459e70 6010d1d9 ffffffff 6033e010 81459e50 6003a269 81459e30 00000000 Call Trace: [<6010d1d9>] ? kclist_add_private+0x0/0xe7 [<6003a269>] walk_system_ram_range+0x61/0xb7 [<6000e859>] ? proc_kcore_init+0x0/0xf1 [<6010d574>] kcore_update_ram+0x4c/0x168 [<6010d72e>] ? kclist_add+0x0/0x2e [<6000e943>] proc_kcore_init+0xea/0xf1 [<6000e859>] ? proc_kcore_init+0x0/0xf1 [<6000e859>] ? proc_kcore_init+0x0/0xf1 [<600189f0>] do_one_initcall+0x13c/0x204 [<6004ca46>] ? parse_args+0x1df/0x2e0 [<6004c82d>] ? parameq+0x0/0x3a [<601b5990>] ? strcpy+0x0/0x18 [<60001e1a>] kernel_init_freeable+0x240/0x31e [<6026f1c0>] kernel_init+0x12/0x148 [<60019fad>] new_thread_handler+0x81/0xa3 Fixes 8c86e70a ("resource: provide new functions to walk through resources"). Reported-by: Daniel Walter <sahne@0x90.at> Tested-by: Richard Weinberger <richard@nod.at> Tested-by: Toralf Förster <toralf.foerster@gmx.de> Tested-by: Daniel Walter <sahne@0x90.at> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
Checkpatch currently warns if a git commit ID (in the changelog, usually) is less than 12 characters or more than 16. The "more than 16" is excessive. Change the check so we accept IDs from 12 to 40 chars in length. Cc: Geert Uytterhoeven <geert@linux-m68k.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-