- 20 Apr, 2021 2 commits
-
-
Potnuri Bharat Teja authored
missing qpid increment leads to skipping few qpids while allocating QP. This eventually leads to adapter running out of qpids after establishing fewer connections than it actually supports. Current patch increments the qpid correctly. Fixes: cfdda9d7 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC") Link: https://lore.kernel.org/r/20210415151422.9139-1-bharat@chelsio.comSigned-off-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com>
-
Wan Jiabing authored
struct ipoib_cm_tx is defined at 245th line. And the definition is independent on the MACRO. The declaration here is unnecessary. Remove it. Link: https://lore.kernel.org/r/20210415092124.27684-1-wanjiabing@vivo.comSigned-off-by:
Wan Jiabing <wanjiabing@vivo.com> Reviewed-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
-
- 19 Apr, 2021 5 commits
-
-
Leon Romanovsky authored
Instead of manually messing with parent driver module reference counting rely on export symbol mechanism to ensure that proper probe/remove chain is performed. Link: https://lore.kernel.org/r/20210401065715.565226-4-leon@kernel.orgSigned-off-by:
Leon Romanovsky <leonro@nvidia.com> Acked-By:
Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by:
-
Leon Romanovsky authored
Convert indirect probe call to its direct equivalent to create a symbol link between RDMA and netdev modules. This will give us an ability to remove custom module reference counting that doesn't belong to the driver. Link: https://lore.kernel.org/r/20210401065715.565226-3-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
The "select" kconfig keyword provides reverse dependency, however it doesn't check that selected symbol meets its own dependencies. Usually "select" is used for non-visible symbols, so instead of trying to keep dependencies in sync with BNXT ethernet driver, simply "depends on" it, like Kconfig documentation suggest. * CONFIG_PCI is already required by BNXT * CONFIG_NETDEVICES and CONFIG_ETHERNET are needed to chose BNXT Link: https://lore.kernel.org/r/20210401065715.565226-2-leon@kernel.orgSigned-off-by:
-
Manjunath Patil authored
Currently IPoIB connected mode queries the device to get the pkey table entry during connection formation. This will increase the time taken to form the connection, especially when limited pkeys are in use. This gets worse when multiple connection attempts are done in parallel. Since ipoib interfaces are locked to a single pkey, use the pkey index that was determined at link up time instead of searching for anything. This improved the latency from 500ms to 1ms on an internal setup. Link: https://lore.kernel.org/r/1618338965-16717-1-git-send-email-manjunath.b.patil@oracle.comSuggested-by:
Manjunath Patil <manjunath.b.patil@oracle.com> Signed-off-by:
-
Håkon Bugge authored
In cm_req_handler(), unify the check for RoCE and re-factor to avoid one test. Link: https://lore.kernel.org/r/1617705423-15570-1-git-send-email-haakon.bugge@oracle.comSuggested-by:
Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by:
-
- 13 Apr, 2021 24 commits
-
-
Jack Wang authored
When "enhanced IPoIB" is enabled for CX-5 devices it requires the parent device to be UP, otherwise the child devices won't work. Thus add a debug message to give admin a hint when only the child interface is UP but parent interface is not. Link: https://lore.kernel.org/r/20210408093215.24023-1-jinpu.wang@ionos.comSigned-off-by:
Jack Wang <jinpu.wang@ionos.com> Reviewed-by:
-
Xi Wang authored
Remove duplicated code for setting hem page size in PF and VF. Link: https://lore.kernel.org/r/1617715514-29039-7-git-send-email-liweihang@huawei.comSigned-off-by:
Xi Wang <wangxi11@huawei.com> Signed-off-by:
Weihang Li <liweihang@huawei.com> Signed-off-by:
-
Wei Xu authored
Introduce the VF support by adding code changes to allow VF PCI device initialization, assgining the reserved resource of the PF to the active VFs, setting the default abilities, applying the interruptions, resetting and reducing the default QP/GID number to aovid exceeding the hardware limitation. Link: https://lore.kernel.org/r/1617715514-29039-6-git-send-email-liweihang@huawei.comSigned-off-by:
Wei Xu <xuwei5@hisilicon.com> Signed-off-by:
Shengming Shu <shushengming1@huawei.com> Signed-off-by:
-
Wei Xu authored
Switch parameters of all functions belong to a PF should be set including VFs. Link: https://lore.kernel.org/r/1617715514-29039-5-git-send-email-liweihang@huawei.comSigned-off-by:
-
Wei Xu authored
Query the resource including EQC/SMAC/SGID from the firmware in the PF and distribute fairly among all the functions belong to the PF. Link: https://lore.kernel.org/r/1617715514-29039-4-git-send-email-liweihang@huawei.comSigned-off-by:
-
Wei Xu authored
Query how many functions are supported by the PF from the FW and store it in the hns_roce_dev structure which will be used to support the configuration of virtual functions. Link: https://lore.kernel.org/r/1617715514-29039-3-git-send-email-liweihang@huawei.comSigned-off-by:
-
Xi Wang authored
Use hr_reg_write/read() to simplify codes about configuring function's resource. And because the design of PF/VF fields is same, they can be defined only once. Link: https://lore.kernel.org/r/1617715514-29039-2-git-send-email-liweihang@huawei.comSigned-off-by:
-
Gioh Kim authored
Two error messages are only different message but have common code to generate the path string. Link: https://lore.kernel.org/r/20210406123639.202899-4-gi-oh.kim@ionos.comSigned-off-by:
Gioh Kim <gi-oh.kim@ionos.com> Signed-off-by:
-
Gioh Kim authored
It does not help to debug if it only print error message without any debugging information which session and connection the error happened. Link: https://lore.kernel.org/r/20210406123639.202899-3-gi-oh.kim@ionos.comSigned-off-by:
-
Gioh Kim authored
Client prints only error value and it is not enough for debugging. 1. When client receives an error from server: the client does not only print the error value but also more information of server connection. 2. When client failes to send IO: the client gets an error from RDMA layer. It also print more information of server connection. Link: https://lore.kernel.org/r/20210406123639.202899-2-gi-oh.kim@ionos.comSigned-off-by:
-
Gioh Kim authored
Describe new multipath policy min-latency of the RTRS client. Link: https://lore.kernel.org/r/20210407113444.150961-5-gi-oh.kim@ionos.comSigned-off-by:
-
Gioh Kim authored
It shows the latest latency that the client checked when sending the heart-beat. Link: https://lore.kernel.org/r/20210407113444.150961-3-gi-oh.kim@ionos.comSigned-off-by:
-
Gioh Kim authored
This patch adds new multipath policy: min-latency. Client checks the latency of each path when it sends the heart-beat. And it sends IO to the path with the minimum latency. Link: https://lore.kernel.org/r/20210407113444.150961-2-gi-oh.kim@ionos.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linuxJason Gunthorpe authored
Maor Gottlieb says: ==================== This series from Maor extends MEMIC to support atomic operations from the host in addition to already supported regular read/write. ==================== * 'memic_ops': RDMA/mlx5: Expose UAPI to query DM RDMA/mlx5: Add support in MEMIC operations RDMA/mlx5: Add support to MODIFY_MEMIC command RDMA/mlx5: Re-organize the DM code RDMA/mlx5: Move all DM logic to separate file RDMA/uverbs: Make UVERBS_OBJECT_METHODS to consider line number net/mlx5: Add MEMIC operations related bits
-
Maor Gottlieb authored
Expose UAPI to query MEMIC DM, this will let user space application that didn't allocate the DM but has access to by owning the matching command FD to retrieve its information. Link: https://lore.kernel.org/r/20210411122924.60230-8-leon@kernel.orgSigned-off-by:
Maor Gottlieb <maorg@nvidia.com> Signed-off-by:
-
Maor Gottlieb authored
MEMIC buffer, in addition to regular read and write operations, can support atomic operations from the host. Introduce and implement new UAPI to allocate address space for MEMIC operations such as atomic. This includes: 1. Expose new IOCTL for request mapping of MEMIC operation. 2. Hold the operations address in a list, so same operation to same DM will be allocated only once. 3. Manage refcount on the mlx5_ib_dm object, so it would be keep valid until all addresses were unmapped. Link: https://lore.kernel.org/r/20210411122924.60230-7-leon@kernel.orgSigned-off-by:
-
Maor Gottlieb authored
Add two functions to allocate and deallocate MEMIC operations by using the MODIFY_MEMIC command. Link: https://lore.kernel.org/r/20210411122924.60230-6-leon@kernel.orgSigned-off-by:
-
Maor Gottlieb authored
1. Inline the checks from check_dm_type_support() into their respective allocation functions. 2. Fix use after free when driver fails to copy the MEMIC address to the user by moving the allocation code into their respective functions, hence we avoid the explicit call to free the DM in the error flow. 3. Split mlx5_ib_dm struct to memic and icm proper typesafety throughout. Fixes: dc2316eb ("IB/mlx5: Fix device memory flows") Link: https://lore.kernel.org/r/20210411122924.60230-5-leon@kernel.orgSigned-off-by:
-
Maor Gottlieb authored
Move all device memory related code to a separate file. Link: https://lore.kernel.org/r/20210411122924.60230-4-leon@kernel.orgSigned-off-by:
-
Maor Gottlieb authored
In order to support multiple methods declaration in the same file we should use the line number as part of the name. Link: https://lore.kernel.org/r/20210411122924.60230-3-leon@kernel.orgSigned-off-by:
-
Maor Gottlieb authored
Add the MEMIC operations bits and structures to the mlx5_ifc file. Signed-off-by:
-
Mike Marciniszyn authored
All other users of the dummy netdevice embed the netdev in other structures: init_dummy_netdev(&mal->dummy_dev); init_dummy_netdev(ð->dummy_dev); init_dummy_netdev(&ar->napi_dev); init_dummy_netdev(&irq_grp->napi_ndev); init_dummy_netdev(&wil->napi_ndev); init_dummy_netdev(&trans_pcie->napi_dev); init_dummy_netdev(&dev->napi_dev); init_dummy_netdev(&bus->mux_dev); The AIP and VNIC implementation turns that model inside out and used a kfree() to free what appears to be a netdev struct when in reality, it is a struct that enbodies the rx state as well as the dummy netdev used to support napi_poll across disparate receive contexts. The relationship is infered by the odd allocation: const int netdev_size = sizeof(*dd->dummy_netdev) + sizeof(struct hfi1_netdev_priv); <snip> dd->dummy_netdev = kcalloc_node(1, netdev_size, GFP_KERNEL, dd->node); Correct the issue by: - Correctly naming the alloc and free functions - Renaming hfi1_netdev_priv to hfi1_netdev_rx - Replacing dd dummy_netdev with a netdev_rx pointer - Embedding the net_device in hfi1_netdev_rx - Moving the init_dummy_netdev to the alloc routine - Adjusting wrappers to fit the new model Fixes: 6991abcb ("IB/hfi1: Add functions to receive accelerated ipoib packets") Link: https://lore.kernel.org/r/1617026056-50483-11-git-send-email-dennis.dalessandro@cornelisnetworks.comReviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by:
-
Jiapeng Chong authored
Fix the following clang warning: drivers/infiniband/hw/qib/qib_iba7322.c:803:19: warning: unused function 'qib_read_ureg' [-Wunused-function]. Link: https://lore.kernel.org/r/1618305063-29007-1-git-send-email-jiapeng.chong@linux.alibaba.comReported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Yixian Liu authored
As a flush operation is implemented inside destroy_workqueue(), there is no need to do flush operation before. Fixes: bfcc681b ("IB/hns: Fix the bug when free mr") Fixes: 0425e3e6 ("RDMA/hns: Support flush cqe for hip08 in kernel space") Link: https://lore.kernel.org/r/1618305087-30799-1-git-send-email-liweihang@huawei.comSigned-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
-
- 12 Apr, 2021 9 commits
-
-
Gioh Kim authored
A session can be removed dynamically by sysfs interface "remove_path" that eventually calls rtrs_clt_remove_path_from_sysfs function. The current rtrs_clt_remove_path_from_sysfs first removes the sysfs interfaces and frees sess->stats object. Second it removes the session from the active list. Therefore some functions could access non-connected session and access the freed sess->stats object even-if they check the session status before accessing the session. For instance rtrs_clt_request and get_next_path_min_inflight check the session status and try to send IO to the session. The session status could be changed when they are trying to send IO but they could not catch the change and update the statistics information in sess->stats object, and generate use-after-free problem. (see: "RDMA/rtrs-clt: Check state of the rtrs_clt_sess before reading its stats") This patch changes the rtrs_clt_remove_path_from_sysfs to remove the session from the active session list and then destroy the sysfs interfaces. Each function still should check the session status because closing or error recovery paths can change the status. Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20210412084002.33582-1-gi-oh.kim@ionos.comSigned-off-by:
-
Wang Wensheng authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: db7683d7 ("IB/srpt: Fix login-related race conditions") Link: https://lore.kernel.org/r/20210408113132.87250-1-wangwensheng4@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Wensheng <wangwensheng4@huawei.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Håkon Bugge authored
For some HCAs, ib_modify_qp() is an expensive operation running virtualized. For both the active and passive side, the QP returned by the CM has the state set to RTS, so no need for this excess RTS -> RTS transition. With IB Core's ability to set the RNR Retry timer, we use this interface to shave off another ib_modify_qp(). Fixes: ec16227e ("RDS/IB: Infiniband transport") Link: https://lore.kernel.org/r/1617216194-12890-3-git-send-email-haakon.bugge@oracle.comSigned-off-by:
-
Håkon Bugge authored
Introduce the ability for kernel ULPs to adjust the minimum RNR Retry timer. The INIT -> RTR transition executed by RDMA CM will be used for this adjustment. This avoids an additional ib_modify_qp() call. rdma_set_min_rnr_timer() must be called before the call to rdma_connect() on the active side and before the call to rdma_accept() on the passive side. The default value of RNR Retry timer is zero, which translates to 655 ms. When the receiver is not ready to accept a send messages, it encodes the RNR Retry timer value in the NAK. The requestor will then wait at least the specified time value before retrying the send. The 5-bit value to be supplied to the rdma_set_min_rnr_timer() is documented in IBTA Table 45: "Encoding for RNR NAK Timer Field". Link: https://lore.kernel.org/r/1617216194-12890-2-git-send-email-haakon.bugge@oracle.comSigned-off-by:
-
Ye Bin authored
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Link: https://lore.kernel.org/r/20210409095147.2294269-1-yebin10@huawei.comReported-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
-
Wang Wensheng authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/20210408113137.97202-1-wangwensheng4@huawei.comReported-by:
-
Wang Wensheng authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 77241056 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20210408113140.103032-1-wangwensheng4@huawei.comReported-by:
-
Wang Wensheng authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 82af6d19 ("RDMA/qedr: Fix synchronization methods and memory leaks in qedr") Link: https://lore.kernel.org/r/20210408113135.92165-1-wangwensheng4@huawei.comReported-by:
-
Wenpeng Liang authored
Block comments should not use a trailing */ on a separate line and every line of a block comment should start with an '*'. Link: https://lore.kernel.org/r/1617783353-48249-7-git-send-email-liweihang@huawei.comSigned-off-by:
Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by:
-
