1. 05 Sep, 2014 40 commits
    • Mike Qiu's avatar
      powerpc/eeh: Wrong place to call pci_get_slot() · 3aa12318
      Mike Qiu authored
      commit 9e5c6e5a upstream.
      
      pci_get_slot() is called with hold of PCI bus semaphore and it's not
      safe to be called in interrupt context. However, we possibly checks
      EEH error and calls the function in interrupt context. To avoid using
      pci_get_slot(), we turn into device tree for fetching location code.
      Otherwise, we might run into WARN_ON() as following messages indicate:
      
       WARNING: at drivers/pci/search.c:223
       CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-rc3+ #72
       task: c000000001367af0 ti: c000000001444000 task.ti: c000000001444000
       NIP: c000000000497b70 LR: c000000000037530 CTR: 000000003003d114
       REGS: c000000001446fa0 TRAP: 0700   Not tainted  (3.16.0-rc3+)
       MSR: 9000000000029032 <SF,HV,EE,ME,IR,DR,RI>  CR: 48002422  XER: 20000000
       CFAR: c00000000003752c SOFTE: 0
         :
       NIP [c000000000497b70] .pci_get_slot+0x40/0x110
       LR [c000000000037530] .eeh_pe_loc_get+0x150/0x190
       Call Trace:
         .of_get_property+0x30/0x60 (unreliable)
         .eeh_pe_loc_get+0x150/0x190
         .eeh_dev_check_failure+0x1b4/0x550
         .eeh_check_failure+0x90/0xf0
         .lpfc_sli_check_eratt+0x504/0x7c0 [lpfc]
         .lpfc_poll_eratt+0x64/0x100 [lpfc]
         .call_timer_fn+0x64/0x190
         .run_timer_softirq+0x2cc/0x3e0
      Signed-off-by: default avatarMike Qiu <qiudayu@linux.vnet.ibm.com>
      Acked-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3aa12318
    • Christoph Schulz's avatar
      x86: don't exclude low BIOS area when allocating address space for non-PCI cards · 42dbd25a
      Christoph Schulz authored
      commit cbace46a upstream.
      
      Commit 30919b0b ("x86: avoid low BIOS area when allocating address
      space") moved the test for resource allocations that fall within the first
      1MB of address space from the PCI-specific path to a generic path, such
      that all resource allocations will avoid this area.  However, this breaks
      ISA cards which need to allocate a memory region within the first 1MB.  An
      example is the i82365 PCMCIA controller and derivatives like the Ricoh
      RF5C296/396 which map part of the PCMCIA socket memory address space into
      the first 1MB of system memory address space.  They do not work anymore as
      no usable memory region exists due to this change:
      
        Intel ISA PCIC probe: Ricoh RF5C296/396 ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
        host opts [0]: none
        host opts [1]: none
        ISA irqs (scanned) = 3,4,5,9,10 status change on irq 10
        pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
        pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
        pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
        pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff
        pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff
        pcmcia_socket pcmcia_socket0: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff
        pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
        pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0dffff: clean.
        pcmcia_socket pcmcia_socket0: cs: memory probe 0x0e0000-0x0effff: clean.
        pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
        pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
        pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
        pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
        pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff
        pcmcia_socket pcmcia_socket1: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff
        pcmcia_socket pcmcia_socket1: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff
        pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
        pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff: clean.
        pcmcia_socket pcmcia_socket1: cs: memory probe 0x0e0000-0x0effff: clean.
        pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
        pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
        pcmcia_socket pcmcia_socket1: cs: memory probe 0x0cc000-0x0effff: excluding 0xe0000-0xeffff
        pcmcia_socket pcmcia_socket1: cs: unable to map card memory!
      
      If filtering out the first 1MB is reverted, everything works as expected.
      Tested-by: default avatarRobert Resch <fli4l@robert.reschpara.de>
      Signed-off-by: default avatarChristoph Schulz <develop@kristov.de>
      Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      42dbd25a
    • Simone Gotti's avatar
      ACPI / PCI: Fix sysfs acpi_index and label errors · 3b7d7354
      Simone Gotti authored
      commit dcfa9be8 upstream.
      
      Fix errors in handling "device label" _DSM return values.
      
      If _DSM returns a Unicode string, the ACPI type is ACPI_TYPE_BUFFER, not
      ACPI_TYPE_STRING.  Fix dsm_label_utf16s_to_utf8s() to convert UTF-16 from
      acpi_object->buffer instead of acpi_object->string.
      
      Prior to v3.14, we accepted Unicode labels (ACPI_TYPE_BUFFER return
      values).  But after 1d0fcef7, we accepted only ASCII (ACPI_TYPE_STRING)
      (and we incorrectly tried to convert those ASCII labels from UTF-16 to
      UTF-8).
      
      Rejecting Unicode labels made us return -EPERM when reading sysfs
      "acpi_index" or "label" files, which in turn caused on-board network
      interfaces on a Dell PowerEdge E420 to be renamed (by udev net_id internal)
      from eno1/eno2 to enp2s0f0/enp2s0f1.
      
      Fix this by accepting either ACPI_TYPE_STRING (and treating it as ASCII) or
      ACPI_TYPE_BUFFER (and converting from UTF-16 to UTF-8).
      
      [bhelgaas: changelog]
      Fixes: 1d0fcef7 ("ACPI / PCI: replace open-coded _DSM code with helper functions")
      Signed-off-by: default avatarSimone Gotti <simone.gotti@gmail.com>
      Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      Reviewed-by: default avatarJiang Liu <jiang.liu@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3b7d7354
    • Myron Stowe's avatar
      PCI: pciehp: Clear Data Link Layer State Changed during init · 5de9628c
      Myron Stowe authored
      commit 0d25d35c upstream.
      
      During PCIe hot-plug initialization - pciehp_probe() - data structures
      related to slot capabilities are set up.  As part of this set up, ISRs are
      put in place to handle slot events and all event bits are cleared out.
      
      This patch adds the Data Link Layer State Changed (PCI_EXP_SLTSTA_DLLSC)
      Slot Status bit to the event bits that are cleared out during
      initialization.
      
      If the BIOS doesn't clear DLLSC before handoff to the OS, pciehp notices
      that it's set and interprets it as a new Link Up event, which results in
      spurious messages:
      
        pciehp 0000:82:04.0:pcie24: slot(4): Link Up event
        pciehp 0000:82:04.0:pcie24: Device 0000:83:00.0 already exists at 0000:83:00, cannot hot-add
        pciehp 0000:82:04.0:pcie24: Cannot add device at 0000:83:00
      
      Prior to e48f1b67 ("PCI: pciehp: Use link change notifications for
      hot-plug and removal"), pciehp ignored DLLSC.
      
      Reference:
        PCI-SIG.  PCI Express Base Specification Revision 4.0 Version 0.3
        (PCI-SIG, 2014): 7.8.11. Slot Status Register (Offset 1Ah).
      
      [bhelgaas: add e48f1b67 ref and stable tag]
      Fixes: e48f1b67 ("PCI: pciehp: Use link change notifications for hot-plug and removal")
      Link: https://bugzilla.kernel.org/show_bug.cgi?id=79611Signed-off-by: default avatarMyron Stowe <myron.stowe@redhat.com>
      Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5de9628c
    • Guo Chao's avatar
      PCI: Keep original resource if we fail to expand it · 36004973
      Guo Chao authored
      commit c3337708 upstream.
      
      If we have space assigned to a resource, we try to expand the resource
      (e.g., to accommodate SR-IOV resources), and the expansion attempt fails,
      we should keep the original assignment.
      
      After bd064f0a ("PCI: Mark resources as IORESOURCE_UNSET if we can't
      assign them"), we left the resource marked IORESOURCE_UNSET when the
      expansion failed, even if it had originally been set.  That caused errors
      like this:
      
        pci 0003:00:00.0: can't enable device: BAR 15 [mem size 0x0c000000 64bit pref] not assigned
        pci 0003:00:00.0: Error enabling bridge (-22), continuing
      
      Fix this by restoring the original flags when reassignment fails.
      
      [bhelgaas: reworked to simplify, changelog]
      Fixes: bd064f0a ("PCI: Mark resources as IORESOURCE_UNSET if we can't assign them")
      Signed-off-by: default avatarGuo Chao <yan@linux.vnet.ibm.com>
      Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      36004973
    • Vidya Sagar's avatar
      PCI: Configure ASPM when enabling device · 3ade630f
      Vidya Sagar authored
      commit 1f6ae47e upstream.
      
      We can't do ASPM configuration at enumeration-time because enabling it
      makes some defective hardware unresponsive, even if ASPM is disabled later
      (see 41cd766b ("PCI: Don't enable aspm before drivers have had a chance
      to veto it").  Therefore, we have to do it after a driver claims the
      device.
      
      We previously configured ASPM in pci_set_power_state(), but that's not a
      very good place because it's not really related to setting the PCI device
      power state, and doing it there means:
      
        - We incorrectly skipped ASPM config when setting a device that's
          already in D0 to D0.
      
        - We unnecessarily configured ASPM when setting a device to a low-power
          state (the ASPM feature only applies when the device is in D0).
      
        - We unnecessarily configured ASPM when called from a .resume() method
          (ASPM configuration needs to be restored during resume, but
          pci_restore_pcie_state() should already do this).
      
      Move ASPM configuration from pci_set_power_state() to
      do_pci_enable_device() so we do it when a driver enables a device.
      
      [bhelgaas: changelog]
      Link: https://bugzilla.kernel.org/show_bug.cgi?id=79621
      Fixes: db288c9c ("PCI / PM: restore the original behavior of pci_set_power_state()")
      Suggested-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      Signed-off-by: default avatarVidya Sagar <sagar.tv@gmail.com>
      Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3ade630f
    • Alex Deucher's avatar
      drm/radeon: add additional SI pci ids · 8912590e
      Alex Deucher authored
      commit 37dbeab7 upstream.
      Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8912590e
    • Alex Deucher's avatar
      drm/radeon: add new bonaire pci ids · b7561c9e
      Alex Deucher authored
      commit 5fc540ed upstream.
      Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b7561c9e
    • Alex Deucher's avatar
    • Theodore Ts'o's avatar
      ext4: fix BUG_ON in mb_free_blocks() · 08b9d6b9
      Theodore Ts'o authored
      commit c99d1e6e upstream.
      
      If we suffer a block allocation failure (for example due to a memory
      allocation failure), it's possible that we will call
      ext4_discard_allocated_blocks() before we've actually allocated any
      blocks.  In that case, fe_len and fe_start in ac->ac_f_ex will still
      be zero, and this will result in mb_free_blocks(inode, e4b, 0, 0)
      triggering the BUG_ON on mb_free_blocks():
      
      	BUG_ON(last >= (sb->s_blocksize << 3));
      
      Fix this by bailing out of ext4_discard_allocated_blocks() if fs_len
      is zero.
      
      Also fix a missing ext4_mb_unload_buddy() call in
      ext4_discard_allocated_blocks().
      
      Google-Bug-Id: 16844242
      
      Fixes: 86f0afd4Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      08b9d6b9
    • Michael S. Tsirkin's avatar
      kvm: iommu: fix the third parameter of kvm_iommu_put_pages (CVE-2014-3601) · 35df08d6
      Michael S. Tsirkin authored
      commit 350b8bdd upstream.
      
      The third parameter of kvm_iommu_put_pages is wrong,
      It should be 'gfn - slot->base_gfn'.
      
      By making gfn very large, malicious guest or userspace can cause kvm to
      go to this error path, and subsequently to pass a huge value as size.
      Alternatively if gfn is small, then pages would be pinned but never
      unpinned, causing host memory leak and local DOS.
      
      Passing a reasonable but large value could be the most dangerous case,
      because it would unpin a page that should have stayed pinned, and thus
      allow the device to DMA into arbitrary memory.  However, this cannot
      happen because of the condition that can trigger the error:
      
      - out of memory (where you can't allocate even a single page)
        should not be possible for the attacker to trigger
      
      - when exceeding the iommu's address space, guest pages after gfn
        will also exceed the iommu's address space, and inside
        kvm_iommu_put_pages() the iommu_iova_to_phys() will fail.  The
        page thus would not be unpinned at all.
      Reported-by: default avatarJack Morgenstein <jackm@mellanox.com>
      Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      35df08d6
    • Paolo Bonzini's avatar
      Revert "KVM: x86: Increase the number of fixed MTRR regs to 10" · 836251bf
      Paolo Bonzini authored
      commit 0d234daf upstream.
      
      This reverts commit 682367c4,
      which causes 32-bit SMP Windows 7 guests to panic.
      
      SeaBIOS has a limit on the number of MTRRs that it can handle,
      and this patch exceeded the limit.  Better revert it.
      Thanks to Nadav Amit for debugging the cause.
      Reported-by: default avatarWanpeng Li <wanpeng.li@linux.intel.com>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      836251bf
    • Wanpeng Li's avatar
      KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use · f5c694cf
      Wanpeng Li authored
      commit 56cc2406 upstream.
      
      After commit 77b0f5d6 (KVM: nVMX: Ack and write vector info to intr_info
      if L1 asks us to), "Acknowledge interrupt on exit" behavior can be
      emulated. To do so, KVM will ask the APIC for the interrupt vector if
      during a nested vmexit if VM_EXIT_ACK_INTR_ON_EXIT is set.  With APICv,
      kvm_get_apic_interrupt would return -1 and give the following WARNING:
      
      Call Trace:
       [<ffffffff81493563>] dump_stack+0x49/0x5e
       [<ffffffff8103f0eb>] warn_slowpath_common+0x7c/0x96
       [<ffffffffa059709a>] ? nested_vmx_vmexit+0xa4/0x233 [kvm_intel]
       [<ffffffff8103f11a>] warn_slowpath_null+0x15/0x17
       [<ffffffffa059709a>] nested_vmx_vmexit+0xa4/0x233 [kvm_intel]
       [<ffffffffa0594295>] ? nested_vmx_exit_handled+0x6a/0x39e [kvm_intel]
       [<ffffffffa0537931>] ? kvm_apic_has_interrupt+0x80/0xd5 [kvm]
       [<ffffffffa05972ec>] vmx_check_nested_events+0xc3/0xd3 [kvm_intel]
       [<ffffffffa051ebe9>] inject_pending_event+0xd0/0x16e [kvm]
       [<ffffffffa051efa0>] vcpu_enter_guest+0x319/0x704 [kvm]
      
      To fix this, we cannot rely on the processor's virtual interrupt delivery,
      because "acknowledge interrupt on exit" must only update the virtual
      ISR/PPR/IRR registers (and SVI, which is just a cache of the virtual ISR)
      but it should not deliver the interrupt through the IDT.  Thus, KVM has
      to deliver the interrupt "by hand", similar to the treatment of EOI in
      commit fc57ac2c (KVM: lapic: sync highest ISR to hardware apic on
      EOI, 2014-05-14).
      
      The patch modifies kvm_cpu_get_interrupt to always acknowledge an
      interrupt; there are only two callers, and the other is not affected
      because it is never reached with kvm_apic_vid_enabled() == true.  Then it
      modifies apic_set_isr and apic_clear_irr to update SVI and RVI in addition
      to the registers.
      Suggested-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      Suggested-by: default avatar"Zhang, Yang Z" <yang.z.zhang@intel.com>
      Tested-by: default avatarLiu, RongrongX <rongrongx.liu@intel.com>
      Tested-by: default avatarFelipe Reyes <freyes@suse.com>
      Fixes: 77b0f5d6Signed-off-by: default avatarWanpeng Li <wanpeng.li@linux.intel.com>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f5c694cf
    • Alexey Kardashevskiy's avatar
      KVM: PPC: Book3S: Fix LPCR one_reg interface · d376ef46
      Alexey Kardashevskiy authored
      commit a0840240 upstream.
      
      Unfortunately, the LPCR got defined as a 32-bit register in the
      one_reg interface.  This is unfortunate because KVM allows userspace
      to control the DPFD (default prefetch depth) field, which is in the
      upper 32 bits.  The result is that DPFD always get set to 0, which
      reduces performance in the guest.
      
      We can't just change KVM_REG_PPC_LPCR to be a 64-bit register ID,
      since that would break existing userspace binaries.  Instead we define
      a new KVM_REG_PPC_LPCR_64 id which is 64-bit.  Userspace can still use
      the old KVM_REG_PPC_LPCR id, but it now only modifies those fields in
      the bottom 32 bits that userspace can modify (ILE, TC and AIL).
      If userspace uses the new KVM_REG_PPC_LPCR_64 id, it can modify DPFD
      as well.
      Signed-off-by: default avatarAlexey Kardashevskiy <aik@ozlabs.ru>
      Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
      Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d376ef46
    • Christian Borntraeger's avatar
      KVM: s390/mm: Fix page table locking vs. split pmd lock · dd713bdf
      Christian Borntraeger authored
      commit 55e4283c upstream.
      
      commit ec66ad66 (s390/mm: enable
      split page table lock for PMD level) activated the split pmd lock
      for s390. Turns out that we missed one place: We also have to take
      the pmd lock instead of the page table lock when we reallocate the
      page tables (==> changing entries in the PMD) during sie enablement.
      Signed-off-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      dd713bdf
    • Paolo Bonzini's avatar
      KVM: x86: always exit on EOIs for interrupts listed in the IOAPIC redir table · e54e2690
      Paolo Bonzini authored
      commit 0f6c0a74 upstream.
      
      Currently, the EOI exit bitmap (used for APICv) does not include
      interrupts that are masked.  However, this can cause a bug that manifests
      as an interrupt storm inside the guest.  Alex Williamson reported the
      bug and is the one who really debugged this; I only wrote the patch. :)
      
      The scenario involves a multi-function PCI device with OHCI and EHCI
      USB functions and an audio function, all assigned to the guest, where
      both USB functions use legacy INTx interrupts.
      
      As soon as the guest boots, interrupts for these devices turn into an
      interrupt storm in the guest; the host does not see the interrupt storm.
      Basically the EOI path does not work, and the guest continues to see the
      interrupt over and over, even after it attempts to mask it at the APIC.
      The bug is only visible with older kernels (RHEL6.5, based on 2.6.32
      with not many changes in the area of APIC/IOAPIC handling).
      
      Alex then tried forcing bit 59 (corresponding to the USB functions' IRQ)
      on in the eoi_exit_bitmap and TMR, and things then work.  What happens
      is that VFIO asserts IRQ11, then KVM recomputes the EOI exit bitmap.
      It does not have set bit 59 because the RTE was masked, so the IOAPIC
      never sees the EOI and the interrupt continues to fire in the guest.
      
      My guess was that the guest is masking the interrupt in the redirection
      table in the interrupt routine, i.e. while the interrupt is set in a
      LAPIC's ISR, The simplest fix is to ignore the masking state, we would
      rather have an unnecessary exit rather than a missed IRQ ACK and anyway
      IOAPIC interrupts are not as performance-sensitive as for example MSIs.
      Alex tested this patch and it fixed his bug.
      
      [Thanks to Alex for his precise description of the problem
       and initial debugging effort.  A lot of the text above is
       based on emails exchanged with him.]
      Reported-by: default avatarAlex Williamson <alex.williamson@redhat.com>
      Tested-by: default avatarAlex Williamson <alex.williamson@redhat.com>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e54e2690
    • Nadav Amit's avatar
      KVM: x86: Inter-privilege level ret emulation is not implemeneted · 540b55f9
      Nadav Amit authored
      commit 9e8919ae upstream.
      
      Return unhandlable error on inter-privilege level ret instruction.  This is
      since the current emulation does not check the privilege level correctly when
      loading the CS, and does not pop RSP/SS as needed.
      Signed-off-by: default avatarNadav Amit <namit@cs.technion.ac.il>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      540b55f9
    • Steven Rostedt's avatar
      debugfs: Fix corrupted loop in debugfs_remove_recursive · 306ccdfd
      Steven Rostedt authored
      commit 485d4402 upstream.
      
      [ I'm currently running my tests on it now, and so far, after a few
       hours it has yet to blow up. I'll run it for 24 hours which it never
       succeeded in the past. ]
      
      The tracing code has a way to make directories within the debugfs file
      system as well as deleting them using mkdir/rmdir in the instance
      directory. This is very limited in functionality, such as there is
      no renames, and the parent directory "instance" can not be modified.
      The tracing code creates the instance directory from the debugfs code
      and then replaces the dentry->d_inode->i_op with its own to allow
      for mkdir/rmdir to work.
      
      When these are called, the d_entry and inode locks need to be released
      to call the instance creation and deletion code. That code has its own
      accounting and locking to serialize everything to prevent multiple
      users from causing harm. As the parent "instance" directory can not
      be modified this simplifies things.
      
      I created a stress test that creates several threads that randomly
      creates and deletes directories thousands of times a second. The code
      stood up to this test and I submitted it a while ago.
      
      Recently I added a new test that adds readers to the mix. While the
      instance directories were being added and deleted, readers would read
      from these directories and even enable tracing within them. This test
      was able to trigger a bug:
      
       general protection fault: 0000 [#1] PREEMPT SMP
       Modules linked in: ...
       CPU: 3 PID: 17789 Comm: rmdir Tainted: G        W     3.15.0-rc2-test+ #41
       Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
       task: ffff88003786ca60 ti: ffff880077018000 task.ti: ffff880077018000
       RIP: 0010:[<ffffffff811ed5eb>]  [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367
       RSP: 0018:ffff880077019df8  EFLAGS: 00010246
       RAX: 0000000000000002 RBX: ffff88006f0fe490 RCX: 0000000000000000
       RDX: dead000000100058 RSI: 0000000000000246 RDI: ffff88003786d454
       RBP: ffff88006f0fe640 R08: 0000000000000628 R09: 0000000000000000
       R10: 0000000000000628 R11: ffff8800795110a0 R12: ffff88006f0fe640
       R13: ffff88006f0fe640 R14: ffffffff81817d0b R15: ffffffff818188b7
       FS:  00007ff13ae24700(0000) GS:ffff88007d580000(0000) knlGS:0000000000000000
       CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
       CR2: 0000003054ec7be0 CR3: 0000000076d51000 CR4: 00000000000007e0
       Stack:
        ffff88007a41ebe0 dead000000100058 00000000fffffffe ffff88006f0fe640
        0000000000000000 ffff88006f0fe678 ffff88007a41ebe0 ffff88003793a000
        00000000fffffffe ffffffff810bde82 ffff88006f0fe640 ffff88007a41eb28
       Call Trace:
        [<ffffffff810bde82>] ? instance_rmdir+0x15b/0x1de
        [<ffffffff81132e2d>] ? vfs_rmdir+0x80/0xd3
        [<ffffffff81132f51>] ? do_rmdir+0xd1/0x139
        [<ffffffff8124ad9e>] ? trace_hardirqs_on_thunk+0x3a/0x3c
        [<ffffffff814fea62>] ? system_call_fastpath+0x16/0x1b
       Code: fe ff ff 48 8d 75 30 48 89 df e8 c9 fd ff ff 85 c0 75 13 48 c7 c6 b8 cc d2 81 48 c7 c7 b0 cc d2 81 e8 8c 7a f5 ff 48 8b 54 24 08 <48> 8b 82 a8 00 00 00 48 89 d3 48 2d a8 00 00 00 48 89 44 24 08
       RIP  [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367
        RSP <ffff880077019df8>
      
      It took a while, but every time it triggered, it was always in the
      same place:
      
      	list_for_each_entry_safe(child, next, &parent->d_subdirs, d_u.d_child) {
      
      Where the child->d_u.d_child seemed to be corrupted.  I added lots of
      trace_printk()s to see what was wrong, and sure enough, it was always
      the child's d_u.d_child field. I looked around to see what touches
      it and noticed that in __dentry_kill() which calls dentry_free():
      
      static void dentry_free(struct dentry *dentry)
      {
      	/* if dentry was never visible to RCU, immediate free is OK */
      	if (!(dentry->d_flags & DCACHE_RCUACCESS))
      		__d_free(&dentry->d_u.d_rcu);
      	else
      		call_rcu(&dentry->d_u.d_rcu, __d_free);
      }
      
      I also noticed that __dentry_kill() unlinks the child->d_u.child
      under the parent->d_lock spin_lock.
      
      Looking back at the loop in debugfs_remove_recursive() it never takes the
      parent->d_lock to do the list walk. Adding more tracing, I was able to
      prove this was the issue:
      
       ftrace-t-15385   1.... 246662024us : dentry_kill <ffffffff81138b91>: free ffff88006d573600
          rmdir-15409   2.... 246662024us : debugfs_remove_recursive <ffffffff811ec7e5>: child=ffff88006d573600 next=dead000000100058
      
      The dentry_kill freed ffff88006d573600 just as the remove recursive was walking
      it.
      
      In order to fix this, the list walk needs to be modified a bit to take
      the parent->d_lock. The safe version is no longer necessary, as every
      time we remove a child, the parent->d_lock must be released and the
      list walk must start over. Each time a child is removed, even though it
      may still be on the list, it should be skipped by the first check
      in the loop:
      
      		if (!debugfs_positive(child))
      			continue;
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      306ccdfd
    • Arnd Bergmann's avatar
      crypto: ux500 - make interrupt mode plausible · 5bdc9b9d
      Arnd Bergmann authored
      commit e1f8859e upstream.
      
      The interrupt handler in the ux500 crypto driver has an obviously
      incorrect way to access the data buffer, which for a while has
      caused this build warning:
      
      ../ux500/cryp/cryp_core.c: In function 'cryp_interrupt_handler':
      ../ux500/cryp/cryp_core.c:234:5: warning: passing argument 1 of '__fswab32' makes integer from pointer without a cast [enabled by default]
           writel_relaxed(ctx->indata,
           ^
      In file included from ../include/linux/swab.h:4:0,
                       from ../include/uapi/linux/byteorder/big_endian.h:12,
                       from ../include/linux/byteorder/big_endian.h:4,
                       from ../arch/arm/include/uapi/asm/byteorder.h:19,
                       from ../include/asm-generic/bitops/le.h:5,
                       from ../arch/arm/include/asm/bitops.h:340,
                       from ../include/linux/bitops.h:33,
                       from ../include/linux/kernel.h:10,
                       from ../include/linux/clk.h:16,
                       from ../drivers/crypto/ux500/cryp/cryp_core.c:12:
      ../include/uapi/linux/swab.h:57:119: note: expected '__u32' but argument is of type 'const u8 *'
       static inline __attribute_const__ __u32 __fswab32(__u32 val)
      
      There are at least two, possibly three problems here:
      a) when writing into the FIFO, we copy the pointer rather than the
         actual data we want to give to the hardware
      b) the data pointer is an array of 8-bit values, while the FIFO
         is 32-bit wide, so both the read and write access fail to do
         a proper type conversion
      c) This seems incorrect for big-endian kernels, on which we need to
         byte-swap any register access, but not normally FIFO accesses,
         at least the DMA case doesn't do it either.
      
      This converts the bogus loop to use the same readsl/writesl pair
      that we use for the two other modes (DMA and polling). This is
      more efficient and consistent, and probably correct for endianess.
      
      The bug has existed since the driver was first merged, and was
      probably never detected because nobody tried to use interrupt mode.
      It might make sense to backport this fix to stable kernels, depending
      on how the crypto maintainers feel about that.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Cc: linux-crypto@vger.kernel.org
      Cc: Fabio Baltieri <fabio.baltieri@linaro.org>
      Cc: Linus Walleij <linus.walleij@linaro.org>
      Cc: Herbert Xu <herbert@gondor.apana.org.au>
      Cc: "David S. Miller" <davem@davemloft.net>
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5bdc9b9d
    • Peter Hurley's avatar
      serial: core: Preserve termios c_cflag for console resume · 0a11a0ce
      Peter Hurley authored
      commit ae84db96 upstream.
      
      When a tty is opened for the serial console, the termios c_cflag
      settings are inherited from the console line settings.
      However, if the tty is subsequently closed, the termios settings
      are lost. This results in a garbled console if the console is later
      suspended and resumed.
      
      Preserve the termios c_cflag for the serial console when the tty
      is shutdown; this reflects the most recent line settings.
      
      Fixes: Bugzilla #69751, 'serial console does not wake from S3'
      Reported-by: default avatarValerio Vanni <valerio.vanni@inwind.it>
      Acked-by: default avatarAlan Cox <alan@linux.intel.com>
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0a11a0ce
    • Theodore Ts'o's avatar
      ext4: fix ext4_discard_allocated_blocks() if we can't allocate the pa struct · 868be28e
      Theodore Ts'o authored
      commit 86f0afd4 upstream.
      
      If there is a failure while allocating the preallocation structure, a
      number of blocks can end up getting marked in the in-memory buddy
      bitmap, and then not getting released.  This can result in the
      following corruption getting reported by the kernel:
      
      EXT4-fs error (device sda3): ext4_mb_generate_buddy:758: group 1126,
      12793 clusters in bitmap, 12729 in gd
      
      In that case, we need to release the blocks using mb_free_blocks().
      
      Tested: fs smoke test; also demonstrated that with injected errors,
      	the file system is no longer getting corrupted
      
      Google-Bug-Id: 16657874
      Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      868be28e
    • Lukas Czerner's avatar
      ext4: fix punch hole on files with indirect mapping · ccc8bd5c
      Lukas Czerner authored
      commit 4f579ae7 upstream.
      
      Currently punch hole code on files with direct/indirect mapping has some
      problems which may lead to a data loss. For example (from Jan Kara):
      
      fallocate -n -p 10240000 4096
      
      will punch the range 10240000 - 12632064 instead of the range 1024000 -
      10244096.
      
      Also the code is a bit weird and it's not using infrastructure provided
      by indirect.c, but rather creating it's own way.
      
      This patch fixes the issues as well as making the operation to run 4
      times faster from my testing (punching out 60GB file). It uses similar
      approach used in ext4_ind_truncate() which takes advantage of
      ext4_free_branches() function.
      
      Also rename the ext4_free_hole_blocks() to something more sensible, like
      the equivalent we have for extent mapped files. Call it
      ext4_ind_remove_space().
      
      This has been tested mostly with fsx and some xfstests which are testing
      punch hole but does not require unwritten extents which are not
      supported with direct/indirect mapping. Not problems showed up even with
      1024k block size.
      Signed-off-by: default avatarLukas Czerner <lczerner@redhat.com>
      Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ccc8bd5c
    • addy ke's avatar
      i2c: rk3x: fix interrupt handling issue · da652606
      addy ke authored
      commit 9c5f7cad upstream.
      
      If slave holds scl, I2C_IPD[7] will be set 1 by controller
      for debugging. Driver must ignore it.
      
      [    5.752391] rk3x-i2c ff160000.i2c: unexpected irq in WRITE: 0x80
      [    5.939027] rk3x-i2c ff160000.i2c: timeout, ipd: 0x80, state: 4
      Signed-off-by: default avatarAddy Ke <addy.ke@rock-chips.com>
      Reviewed-by: default avatarHeiko Stuebner <heiko@sntech.de>
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      da652606
    • Wolfram Sang's avatar
      drivers/i2c/busses: use correct type for dma_map/unmap · eec28d8e
      Wolfram Sang authored
      commit 28772ac8 upstream.
      
      dma_{un}map_* uses 'enum dma_data_direction' not 'enum dma_transfer_direction'.
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      Acked-by: default avatarLudovic Desroches <ludovic.desroches@atmel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      eec28d8e
    • Jason Gunthorpe's avatar
      tpm: Add missing tpm_do_selftest to ST33 I2C driver · fe1df3fb
      Jason Gunthorpe authored
      commit f07a5e9a upstream.
      
      Most device drivers do call 'tpm_do_selftest' which executes a
      TPM_ContinueSelfTest. tpm_i2c_stm_st33 is just pointlessly different,
      I think it is bug.
      
      These days we have the general assumption that the TPM is usable by
      the kernel immediately after the driver is finished, so we can no
      longer defer the mandatory self test to userspace.
      Reported-by: default avatarRichard Marciel <rmaciel@linux.vnet.ibm.com>
      Signed-off-by: default avatarJason Gunthorpe <jgunthorpe@obsidianresearch.com>
      Signed-off-by: default avatarPeter Huewe <peterhuewe@gmx.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fe1df3fb
    • Axel Lin's avatar
      hwmon: (lm92) Prevent overflow problem when writing large limits · 99348bde
      Axel Lin authored
      commit 5b963089 upstream.
      
      On platforms with sizeof(int) < sizeof(long), writing a temperature
      limit larger than MAXINT will result in unpredictable limit values
      written to the chip. Avoid auto-conversion from long to int to fix
      the problem.
      
      The hysteresis temperature range depends on the value of
      data->temp[attr->index], since val is subtracted from it.
      Use a wider clamp, [-120000, 220000] should do to cover the
      possible range. Also add missing TEMP_TO_REG() on writes into
      cached hysteresis value.
      
      Also uses clamp_val to simplify the code a bit.
      Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
      [Guenter Roeck: Fixed double TEMP_TO_REG on hysteresis updates]
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      99348bde
    • Axel Lin's avatar
      hwmon: (dme1737) Prevent overflow problem when writing large limits · 26a05f26
      Axel Lin authored
      commit d58e47d7 upstream.
      
      On platforms with sizeof(int) < sizeof(long), writing a temperature
      limit larger than MAXINT will result in unpredictable limit values
      written to the chip. Avoid auto-conversion from long to int to fix
      the problem.
      
      Voltage limits, fan minimum speed, pwm frequency, pwm ramp rate, and
      other attributes have the same problem, fix them as well.
      
      Zone temperature limits are signed, but were cached as u8, causing
      unepected values to be reported for negative temperatures. Cache as
      s8 to fix the problem.
      
      vrm is an u8, so the written value needs to be limited to [0, 255].
      Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
      [Guenter Roeck: Fix zone temperature cache]
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      26a05f26
    • Axel Lin's avatar
      hwmon: (ads1015) Fix out-of-bounds array access · 58e566ec
      Axel Lin authored
      commit e9814295 upstream.
      
      Current code uses data_rate as array index in ads1015_read_adc() and uses pga
      as array index in ads1015_reg_to_mv, so we must make sure both data_rate and
      pga settings are in valid value range.
      Return -EINVAL if the setting is out-of-range.
      Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      58e566ec
    • Guenter Roeck's avatar
      hwmon: (lm85) Fix various errors on attribute writes · 8c0a3ce2
      Guenter Roeck authored
      commit 3248c3b7 upstream.
      
      Temperature limit register writes did not account for negative numbers.
      As a result, writing -127000 resulted in -126000 written into the
      temperature limit register. This problem affected temp[1-3]_min,
      temp[1-3]_max, temp[1-3]_auto_temp_crit, and temp[1-3]_auto_temp_min.
      
      When writing pwm[1-3]_freq, a long variable was auto-converted into an int
      without range check. Wiring values larger than MAXINT resulted in unexpected
      register values.
      
      When writing temp[1-3]_auto_temp_max, an unsigned long variable was
      auto-converted into an int without range check. Writing values larger than
      MAXINT resulted in unexpected register values.
      
      vrm is an u8, so the written value needs to be limited to [0, 255].
      
      Cc: Axel Lin <axel.lin@ingics.com>
      Reviewed-by: default avatarAxel Lin <axel.lin@ingics.com>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8c0a3ce2
    • Axel Lin's avatar
      hwmon: (ads1015) Fix off-by-one for valid channel index checking · ecba6775
      Axel Lin authored
      commit 56de1377 upstream.
      
      Current code uses channel as array index, so the valid channel value is
      0 .. ADS1015_CHANNELS - 1.
      Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ecba6775
    • Axel Lin's avatar
      hwmon: (gpio-fan) Prevent overflow problem when writing large limits · 0429797f
      Axel Lin authored
      commit 2565fb05 upstream.
      
      On platforms with sizeof(int) < sizeof(unsigned long), writing a rpm value
      larger than MAXINT will result in unpredictable limit values written to the
      chip. Avoid auto-conversion from unsigned long to int to fix the problem.
      Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0429797f
    • Guenter Roeck's avatar
      hwmon: (lm78) Fix overflow problems seen when writing large temperature limits · 0a98f943
      Guenter Roeck authored
      commit 1074d683 upstream.
      
      On platforms with sizeof(int) < sizeof(long), writing a temperature
      limit larger than MAXINT will result in unpredictable limit values
      written to the chip. Avoid auto-conversion from long to int to fix
      the problem.
      
      Cc: Axel Lin <axel.lin@ingics.com>
      Reviewed-by: default avatarAxel Lin <axel.lin@ingics.com>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0a98f943
    • Axel Lin's avatar
      hwmon: (amc6821) Fix possible race condition bug · cbde0b49
      Axel Lin authored
      commit cf44819c upstream.
      
      Ensure mutex lock protects the read-modify-write period to prevent possible
      race condition bug.
      In additional, update data->valid should also be protected by the mutex lock.
      Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      cbde0b49
    • Axel Lin's avatar
      hwmon: (sis5595) Prevent overflow problem when writing large limits · 49aad901
      Axel Lin authored
      commit cc336546 upstream.
      
      On platforms with sizeof(int) < sizeof(long), writing a temperature
      limit larger than MAXINT will result in unpredictable limit values
      written to the chip. Avoid auto-conversion from long to int to fix
      the problem.
      Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      49aad901
    • Ulf Hansson's avatar
      mmc: mmci: Move all CMD irq handling to mmci_cmd_irq() · 4f46f895
      Ulf Hansson authored
      commit ad82bfea upstream.
      
      This patch won't change the behavior of how mmci deals with CMD irqs.
      By moving code from mmci_irq() to mmci_cmd_irq(), we getter a better
      overview of what going on.
      
      Cc: Peter Maydell <peter.maydell@linaro.org>
      Cc: John Stultz <john.stultz@linaro.org>
      Cc: Russell King <linux@arm.linux.org.uk>
      Tested-by: default avatarKees Cook <keescook@chromium.org>
      Tested-by: default avatarJohn Stultz <john.stultz@linaro.org>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4f46f895
    • Ulf Hansson's avatar
      mmc: mmci: Remove redundant check of status for DATA irq · d34227cd
      Ulf Hansson authored
      commit 1cb9da50 upstream.
      
      We don't need to verify the content of the status register twice, while
      we are about to handle a DATA irq. Instead let's leave all verification
      to be handled by mmci_data_irq().
      
      Cc: Peter Maydell <peter.maydell@linaro.org>
      Cc: John Stultz <john.stultz@linaro.org>
      Cc: Russell King <linux@arm.linux.org.uk>
      Tested-by: default avatarKees Cook <keescook@chromium.org>
      Tested-by: default avatarJohn Stultz <john.stultz@linaro.org>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d34227cd
    • Russell King's avatar
      drm: omapdrm: fix compiler errors · 9a35c3ef
      Russell King authored
      commit 2d31ca3a upstream.
      
      Regular randconfig nightly testing has detected problems with omapdrm.
      
      omapdrm fails to build when the kernel is built to support 64-bit DMA
      addresses and/or 64-bit physical addresses due to an assumption about
      the width of these types.
      
      Use %pad to print DMA addresses, rather than %x or %Zx (which is even
      more wrong than %x).  Avoid passing a uint32_t pointer into a function
      which expects dma_addr_t pointer.
      
      drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply':
      drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format]
      drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format]
      make[5]: *** [drivers/gpu/drm/omapdrm/omap_plane.o] Error 1
      drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_get_paddr':
      drivers/gpu/drm/omapdrm/omap_gem.c:794:4: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Werror=format]
      drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_describe':
      drivers/gpu/drm/omapdrm/omap_gem.c:991:4: error: format '%Zx' expects argument of type 'size_t', but argument 7 has type 'dma_addr_t' [-Werror=format]
      drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_init':
      drivers/gpu/drm/omapdrm/omap_gem.c:1470:4: error: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Werror=format]
      make[5]: *** [drivers/gpu/drm/omapdrm/omap_gem.o] Error 1
      drivers/gpu/drm/omapdrm/omap_dmm_tiler.c: In function 'dmm_txn_append':
      drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:226:2: error: passing argument 3 of 'alloc_dma' from incompatible pointer type [-Werror]
      make[5]: *** [drivers/gpu/drm/omapdrm/omap_dmm_tiler.o] Error 1
      make[5]: Target `__build' not remade because of errors.
      make[4]: *** [drivers/gpu/drm/omapdrm] Error 2
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9a35c3ef
    • Jeremy Vial's avatar
      ARM: OMAP3: Fix choice of omap3_restore_es function in OMAP34XX rev3.1.2 case. · 3d111c8a
      Jeremy Vial authored
      commit 9b5f7428 upstream.
      
      According to the comment “restore_es3: applies to 34xx >= ES3.0" in
      "arch/arm/mach-omap2/sleep34xx.S”, omap3_restore_es3 should be used
      if the revision of an OMAP34xx is ES3.1.2.
      Signed-off-by: default avatarJeremy Vial <jvial@adeneo-embedded.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3d111c8a
    • Baruch Siach's avatar
      ARM: 8097/1: unistd.h: relocate comments back to place · fffc11e1
      Baruch Siach authored
      commit bc994c77 upstream.
      
      Commit cb8db5d4 (UAPI: (Scripted) Disintegrate arch/arm/include/asm) moved
      these syscall comments out of their context into the UAPI headers. Fix this.
      
      Fixes: cb8db5d4 ("UAPI: (Scripted) Disintegrate arch/arm/include/asm")
      Signed-off-by: default avatarBaruch Siach <baruch@tkos.co.il>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fffc11e1
    • Suman Anna's avatar
      ARM: dts: AM4372: Correct mailbox node data · 8c4239d6
      Suman Anna authored
      commit 44e6ab1b upstream.
      
      The mailbox DT node for AM4372 is enabled and is corrected to
      remove some properties that have crept in by mistake.
      
      Fixes: 9e3269b8 (ARM: dts: AM4372: Add L2, EDMA, mailbox, MMC and SHAM nodes)
      Signed-off-by: default avatarSuman Anna <s-anna@ti.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8c4239d6