The top few bits aren't relevant to pad out because they're always zero.
Let's just print 5 digits instead of 8 so that it's a little shorter and
more readable.
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Suggested-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200415192916.78339-1-swboyd@chromium.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

We pass the result of sizeof() here to tell the printk format specifier
how many bytes to print. That expects an int though and sizeof() isn't
that type. Cast to int to silence this warning:

drivers/soc/qcom/cmd-db.c: In function 'cmd_db_debugfs_dump':
drivers/soc/qcom/cmd-db.c:281:30: warning: field width specifier '*' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=]
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Fixes: d6815c5c ("soc: qcom: cmd-db: Add debugfs dumping file")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200415062033.66406-1-swboyd@chromium.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This patch allow the rpmpd driver to be loaded as a permenent
module. Meaning it can be loaded from a module, but then cannot
be unloaded.

Ideally, it would include a remove hook and related logic, but
apparently the genpd code isn't able to track usage and cleaning
things up? (See: https://lkml.org/lkml/2019/1/24/38)

So making it a permenent module at least improves things slightly
over requiring it to be a built in driver.

Cc: Todd Kjos <tkjos@google.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Acked-by: Saravana Kannan <saravanak@google.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200326224459.105170-2-john.stultz@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This patch allow the rpmhpd driver to be loaded as a permenent
module. Meaning it can be loaded from a module, but then cannot
be unloaded.

Ideally, it would include a remove hook and related logic, but
apparently the genpd code isn't able to track usage and cleaning
things up?

So making it a permenent module at least improves things slightly
over requiring it to be a built in driver.

Cc: Todd Kjos <tkjos@google.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Acked-by: Saravana Kannan <saravanak@google.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200326224459.105170-4-john.stultz@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This patch allow the rpmh driver to be loaded as a permenent
module. Meaning it can be loaded from a module, but then cannot
be unloaded.

Ideally, it would include a remove hook and related logic, but
the rpmh driver is fairly core to the system, so once its loaded
with almost anythign else to get the system to go, the dependencies
are not likely to ever also be removed.

So making it a permenent module at least improves things slightly
over requiring it to be a built in driver.
Acked-by: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200326224459.105170-3-john.stultz@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The RSC_DRV_IRQ_ENABLE, RSC_DRV_IRQ_STATUS, and RSC_DRV_IRQ_CLEAR
registers are not part of TCS 0.  Let's not pretend that they are by
using read_tcs_reg() and write_tcs_reg() and passing a bogus tcs_id of
0.  We could introduce a new wrapper for these registers but it
wouldn't buy us much.  Let's just read/write directly.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.10.I2adf93809c692d0b673e1a86ea97c45644aa8d97@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Auditing tcs_invalidate() made me worried.  Specifically I saw that it
used spin_lock(), not spin_lock_irqsave().  That always worries me
unless I can trace for sure that I'm in the interrupt handler or that
someone else already disabled interrupts.

Looking more at it, there is actually no reason for these locks
anyway.  Specifically the only reason you'd ever call
rpmh_rsc_invalidate() is if you cared that the sleep/wake TCSes were
empty.  That means that they need to continue to be empty even after
rpmh_rsc_invalidate() returns.  The only way that can happen is if the
caller already has done something to keep all other RPMH users out.
It should be noted that even though the caller is only worried about
making sleep/wake TCSes empty, they also need to worry about stopping
active-only transfers if they need to handle the case where
active-only transfers might borrow the wake TCS.

At the moment rpmh_rsc_invalidate() is only called in PM code from the
last CPU.  If that later changes the caller will still need to solve
the above problems themselves, so these locks will never be useful.

Continuing to audit tcs_invalidate(), I found a bug.  The function
didn't properly check for a borrowed TCS if we hadn't recently written
anything into the TCS.  Specifically, if we've never written to the
WAKE_TCS (or we've flushed it recently) then tcs->slots is empty.
We'll early-out and we'll never call tcs_is_free().

I thought about fixing this bug by either deleting the early check for
bitmap_empty() or possibly only doing it if we knew we weren't on a
TCS that could be borrowed.  However, I think it's better to just
delete the checks.

As argued above it's up to the caller to make sure that all other
users of RPMH are quiet before tcs_invalidate() is called.  Since
callers need to handle the zero-active-TCS case anyway that means they
need to make sure that the active-only transfers are quiet before
calling too.  The one way tcs_invalidate() gets called today is
through rpmh_rsc_cpu_pm_callback() which calls
rpmh_rsc_ctrlr_is_busy() to handle this.  When we have another path to
get to tcs_invalidate() it will also need to come up with something
similar and it won't need this extra check either.  If we later find
some code path that actually needs this check back in (and somehow
manages to be race free) we can always add it back in.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.9.I07c1f70e0e8f2dc0004bd38970b4e258acdc773e@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The calls rpmh_rsc_write_ctrl_data() and rpmh_rsc_send_data() are only
ever called from rpmh.c.  We know that rpmh.c already error checked
the message.  There's no reason to do it again in rpmh-rsc.
Suggested-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.8.I8e187cdfb7a31f5bb7724f1f937f2862ee464a35@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

tcs_is_free() had two checks in it: does the software think that the
TCS is free and does the hardware think that the TCS is free.  I
couldn't figure out in which case the hardware could think that a TCS
was in-use but software thought it was free.  Apparently there is no
case and the extra check can be removed.  This apparently has already
been done in a downstream patch.
Suggested-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.7.Icf2213131ea652087f100129359052c83601f8b0@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

I've been pouring through the rpmh-rsc code and trying to understand
it.  Document everything to the best of my ability.  All documentation
here is strictly from code analysis--no actual knowledge of the
hardware was used.  If something is wrong in here I either
misunderstood the code, had a typo, or the code has a bug in it
leading to my incorrect understanding.

In a few places here I have documented things that don't make tons of
sense.  A future patch will try to address this.  While this means I'm
adding comments / todos and then later fixing them in the series, it
seemed more urgent to get things documented first so that people could
understand the later patches.

Any comments I adjusted I also tried to make match kernel-doc better.
Specifically:
- kernel-doc says do not leave a blank line between the function
  description and the arguments
- kernel-doc examples always have things starting w/ a capital and
  ending with a period.

This should be a no-op.  It's just comment changes.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200413100321.v4.6.I52653eb85d7dc8981ee0dafcd0b6cc0f273e9425@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The "cmd_cache" in RPMH wasn't terribly sensible.  Specifically:

- The current code doesn't really detect "conflicts" properly any case
  where the sequence being checked has more than one entry.  One
  simple way to see this in the current code is that if cmd[0].addr
  isn't found then cmd[1].addr is never checked.
- The code attempted to use the "cmd_cache" to update an existing
  message in a sleep/wake TCS with new data.  The goal appeared to be
  to update part of a TCS while leaving the rest of the TCS alone.  We
  never actually do this.  We always fully invalidate and re-write
  everything.
- If/when we try to optimize things to not fully invalidate / re-write
  every time we update the TCSes we'll need to think it through very
  carefully.  Specifically requirement of find_match() that the new
  sequence of addrs must match exactly the old sequence of addrs seems
  inflexible.  It's also not documented in rpmh_write() and
  rpmh_write_batch().  In any case, if we do decide to require updates
  to keep the exact same sequence and length then presumably the API
  and data structures should be updated to understand groups more
  properly.  The current algorithm doesn't really keep track of the
  length of the old sequence and there are several boundary-condition
  bugs because of that.  Said another way: if we decide to do
  something like this in the future we should start from scratch and
  thus find_match() isn't useful to keep around.

This patch isn't quite a no-op.  Specifically:

- It should be a slight performance boost of not searching through so
  many arrays.
- The old code would have done something useful in one case: it would
  allow someone calling rpmh_write() to override the data that came
  from rpmh_write_batch().  I don't believe that actually happens in
  reality.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.5.I6d3d0a3ec810dc72ff1df3cbf97deefdcdeb8eef@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The get_tcs_of_type() function doesn't provide any value.  It's not
conceptually difficult to access a value in an array, even if that
value is in a structure and we want a pointer to the value.  Having
the function in there makes me feel like it's doing something fancier
like looping or searching.  Remove it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.4.Ia348ade7c6ed1d0d952ff2245bc854e5834c8d9a@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

I was trying to write documentation for the functions in rpmh-rsc and
I got to tcs_ctrl_write().  The documentation for the function would
have been: "This is the core of rpmh_rsc_write_ctrl_data(); all the
caller does is error-check and then call this".

Having the error checks in a separate function doesn't help for
anything since:
- There are no other callers that need to bypass the error checks.
- It's less documenting.  When I read tcs_ctrl_write() I kept
  wondering if I need to handle cases other than ACTIVE_ONLY or cases
  with more commands than could fit in a TCS.  This is obvious when
  the error checks and code are together.
- The function just isn't that long, so there's no problem
  understanding the combined function.

Things were even more confusing because the two functions names didn't
make obvious (at least to me) their relationship.

Simplify by folding one function into the other.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.3.Ie88ce5ccfc0c6055903ccca5286ae28ed3b85ed3@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Perhaps it's just me, it took a really long time to understand what
the register layout of rpmh-rsc was just from the #defines.  Let's add
a bunch of comments describing which blocks are part of other blocks.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200413100321.v4.2.Iaddc29b72772e6ea381238a0ee85b82d3903e5f2@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This patch makes two changes, both of which should be no-ops:

1. Make read_tcs_reg() / read_tcs_cmd() symmetric to write_tcs_reg() /
   write_tcs_cmd().

2. Change the order of operations in the above functions to make it
   more obvious to me what the math is doing.  Specifically first you
   want to find the right TCS, then the right register, and then
   multiply by the command ID if necessary.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.1.I1b754137e8089e46cf33fc2ea270734ec3847ec4@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

When there are more than one WAKE TCS available and there is no dedicated
ACTIVE TCS available, invalidating all WAKE TCSes and waiting for current
transfer to complete in first WAKE TCS blocks using another free WAKE TCS
to complete current request.

Remove rpmh_rsc_invalidate() to happen from tcs_write() when WAKE TCSes
is re-purposed to be used for Active mode. Clear only currently used
WAKE TCS's register configuration.

Fixes: 2de4b8d3 (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-7-git-send-email-mkshah@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

For RSCs that have sleep & wake TCS but no dedicated active TCS, wake
TCS can be re-purposed to send active requests. Once the active requests
are sent and response is received, the active mode configuration needs
to be cleared so that controller can use wake TCS for sending wake
requests.

Introduce enable_tcs_irq() to enable completion IRQ for repurposed TCSes.

Fixes: 2de4b8d3 (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
[mkshah: call enable_tcs_irq() within drv->lock, update commit message]
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-6-git-send-email-mkshah@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add changes to invoke rpmh flush() from CPU PM notification.
This is done when the last the cpu is entering deep CPU idle
states and controller is not busy.

Controllers that have 'HW solver' mode like display RSC do not need
to register for CPU PM notification. They may be in autonomous mode
executing low power mode and do not require rpmh_flush() to happen
from CPU PM notification.
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-5-git-send-email-mkshah@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

TCSes have previously programmed data when rpmh_flush() is called.
This can cause old data to trigger along with newly flushed.

Fix this by cleaning SLEEP and WAKE TCSes before new data is flushed.

With this there is no need to invoke rpmh_rsc_invalidate() call from
rpmh_invalidate().

Simplify rpmh_invalidate() by moving invalidate_batch() inside.

Fixes: 600513df ("drivers: qcom: rpmh: cache sleep/wake state requests")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-4-git-send-email-mkshah@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Currently rpmh ctrlr dirty flag is set for all cases regardless of data
is really changed or not. Add changes to update dirty flag when data is
changed to newer values. Update dirty flag everytime when data in batch
cache is updated since rpmh_flush() may get invoked from any CPU instead
of only last CPU going to low power mode.

Also move dirty flag updates to happen from within cache_lock and remove
unnecessary INIT_LIST_HEAD() call and a default case from switch.

Fixes: 600513df ("drivers: qcom: rpmh: cache sleep/wake state requests")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Srinivas Rao L <lsrao@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-3-git-send-email-mkshah@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The function platform_get_irq() can log an error already.  Thus omit a
redundant message for the exception handling in the calling function.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/eb92fcfb-6181-1f9d-2601-61e5231bd892@web.deSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

It's useful for kernel devs to understand what resources and data is
stored inside command db. Add a file in debugufs called 'cmd-db' to dump
the memory contents and strings for resources along with their
addresses. E.g.

 Command DB DUMP
 Slave ARC (v16.0)
 -------------------------
 0x00030000: cx.lvl [00 00 10 00 40 00 80 00 c0 00 00 01 80 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00]
 0x00030004: cx.tmr
 0x00030010: mx.lvl [00 00 10 00 00 01 80 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00]
 0x00030014: mx.tmr

Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200309185704.2491-1-swboyd@chromium.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Looks like SoC ID is not exported to sysfs for some reason.
This patch adds it!

This is mostly used by userspace libraries like Snapdragon
Neural Processing Engine (SNPE) SDK for checking supported SoC info.

Fixes: efb448d0 ("soc: qcom: Add socinfo driver")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200319121418.5180-1-srinivas.kandagatla@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

If CONFIG_QCOM_COMMAND_DB=n the following compilation errors will be
seen. Fix this by including the appropriate linux headers.

./include/soc/qcom/cmd-db.h: In function ‘cmd_db_read_aux_data’:
./include/soc/qcom/cmd-db.h: error: implicit declaration of function ‘ERR_PTR’;
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200227125615.4727-1-sibis@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This sorts the actual field names too, potentially causing even more
chaos and confusion at merge time if you have edited the MAINTAINERS
file.  But the end result is a more consistent layout, and hopefully
it's a one-time pain minimized by doing this just before the -rc1
release.

This was entirely scripted:

  ./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order
Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

They are all supposed to be sorted, but people who add new entries don't
always know the alphabet.  Plus sometimes the entry names get edited,
and people don't then re-order the entry.

Let's see how painful this will be for merging purposes (the MAINTAINERS
file is often edited in various different trees), but Joe claims there's
relatively few patches in -next that touch this, and doing it just
before -rc1 is likely the best time.  Fingers crossed.

This was scripted with

  /scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS

but then I also ended up manually upper-casing a few entry names that
stood out when looking at the end result.
Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 fixes from Thomas Gleixner:
 "A set of three patches to fix the fallout of the newly added split
  lock detection feature.

  It addressed the case where a KVM guest triggers a split lock #AC and
  KVM reinjects it into the guest which is not prepared to handle it.

  Add proper sanity checks which prevent the unconditional injection
  into the guest and handles the #AC on the host side in the same way as
  user space detections are handled. Depending on the detection mode it
  either warns and disables detection for the task or kills the task if
  the mode is set to fatal"

* tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest
  KVM: x86: Emulate split-lock access as a write in emulator
  x86/split_lock: Provide handle_guest_split_lock()

Pull time(keeping) updates from Thomas Gleixner:

 - Fix the time_for_children symlink in /proc/$PID/ so it properly
   reflects that it part of the 'time' namespace

 - Add the missing userns limit for the allowed number of time
   namespaces, which was half defined but the actual array member was
   not added. This went unnoticed as the array has an exessive empty
   member at the end but introduced a user visible regression as the
   output was corrupted.

 - Prevent further silent ucount corruption by adding a BUILD_BUG_ON()
   to catch half updated data.

* tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ucount: Make sure ucounts in /proc/sys/user don't regress again
  time/namespace: Add max_time_namespaces ucount
  time/namespace: Fix time_for_children symlink

Pull scheduler fixes/updates from Thomas Gleixner:

 - Deduplicate the average computations in the scheduler core and the
   fair class code.

 - Fix a raise between runtime distribution and assignement which can
   cause exceeding the quota by up to 70%.

 - Prevent negative results in the imbalanace calculation

 - Remove a stale warning in the workqueue code which can be triggered
   since the call site was moved out of preempt disabled code. It's a
   false positive.

 - Deduplicate the print macros for procfs

 - Add the ucmap values to the SCHED_DEBUG procfs output for completness

* tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Add task uclamp values to SCHED_DEBUG procfs
  sched/debug: Factor out printing formats into common macros
  sched/debug: Remove redundant macro define
  sched/core: Remove unused rq::last_load_update_tick
  workqueue: Remove the warning in wq_worker_sleeping()
  sched/fair: Fix negative imbalance in imbalance calculation
  sched/fair: Fix race between runtime distribution and assignment
  sched/fair: Align rq->avg_idle and rq->avg_scan_cost

Pull perf fixes from Thomas Gleixner:
 "Three fixes/updates for perf:

   - Fix the perf event cgroup tracking which tries to track the cgroup
     even for disabled events.

   - Add Ice Lake server support for uncore events

   - Disable pagefaults when retrieving the physical address in the
     sampling code"

* tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Disable page faults when getting phys address
  perf/x86/intel/uncore: Add Ice Lake server uncore support
  perf/cgroup: Correct indirection in perf_less_group_idx()
  perf/core: Fix event cgroup tracking

Pull locking fixes from Thomas Gleixner:
 "Three small fixes/updates for the locking core code:

   - Plug a task struct reference leak in the percpu rswem
     implementation.

   - Document the refcount interaction with PID_MAX_LIMIT

   - Improve the 'invalid wait context' data dump in lockdep so it
     contains all information which is required to decode the problem"

* tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Improve 'invalid wait context' splat
  locking/refcount: Document interaction with PID_MAX_LIMIT
  locking/percpu-rwsem: Fix a task_struct refcount

Pull cifs fixes from Steve French:
 "Ten cifs/smb fixes:

   - five RDMA (smbdirect) related fixes

   - add experimental support for swap over SMB3 mounts

   - also a fix which improves performance of signed connections"

* tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: enable swap on SMB3 mounts
  smb3: change noisy error message to FYI
  smb3: smbdirect support can be configured by default
  cifs: smbd: Do not schedule work to send immediate packet on every receive
  cifs: smbd: Properly process errors on ib_post_send
  cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets
  cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending
  cifs: smbd: Check send queue size before posting a send
  cifs: smbd: Merge code to track pending packets
  cifs: ignore cached share root handle closing errors

Pull NFS client bugfix from Trond Myklebust:
 "Fix an RCU read lock leakage in pnfs_alloc_ds_commits_list()"

* tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  pNFS: Fix RCU lock leakage

Pull nios2 updates from Ley Foon Tan:

 - Remove nios2-dev@lists.rocketboards.org from MAINTAINERS

 - remove 'resetvalue' property

 - rename 'altr,gpio-bank-width' -> 'altr,ngpio'

 - enable the common clk subsystem on Nios2

* tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  MAINTAINERS: Remove nios2-dev@lists.rocketboards.org
  arch: nios2: remove 'resetvalue' property
  arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio'
  arch: nios2: Enable the common clk subsystem on Nios2

Pull dma-mapping fixes from Christoph Hellwig:

 - fix an integer truncation in dma_direct_get_required_mask
   (Kishon Vijay Abraham)

 - fix the display of dma mapping types (Grygorii Strashko)

* tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: fix displaying of dma allocation type
  dma-direct: fix data truncation in dma_direct_get_required_mask()

Pull more Kbuild updates from Masahiro Yamada:

 - raise minimum supported binutils version to 2.23

 - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports

 - move remaining CONFIG_AS_* tests to Kconfig from Makefile

 - enable -Wtautological-compare warnings to catch more issues

 - do not support GCC plugins for GCC <= 4.7

 - fix various breakages of 'make xconfig'

 - include the linker version used for linking the kernel into
   LINUX_COMPILER, which is used for the banner, and also exposed to
   /proc/version

 - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
   allows us to remove the lib-ksyms.o workaround, and to solve the last
   known issue of the LLVM linker

 - add dummy tools in scripts/dummy-tools/ to enable all compiler tests
   in Kconfig, which will be useful for distro maintainers

 - support the single switch, LLVM=1 to use Clang and all LLVM utilities
   instead of GCC and Binutils.

 - support LLVM_IAS=1 to enable the integrated assembler, which is still
   experimental

* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
  kbuild: fix comment about missing include guard detection
  kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
  kbuild: replace AS=clang with LLVM_IAS=1
  kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
  kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
  MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
  kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
  kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
  Documentation/llvm: fix the name of llvm-size
  kbuild: mkcompile_h: Include $LD version in /proc/version
  kconfig: qconf: Fix a few alignment issues
  kconfig: qconf: remove some old bogus TODOs
  kconfig: qconf: fix support for the split view mode
  kconfig: qconf: fix the content of the main widget
  kconfig: qconf: Change title for the item window
  kconfig: qconf: clean deprecated warnings
  gcc-plugins: drop support for GCC <= 4.7
  kbuild: Enable -Wtautological-compare
  x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
  crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
  ...

I do not longer work for credativ Germany.

Please, use my private email address instead.

This is for the case when people want to CC me on
patches sent from my old business email address.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Another brown paper bag moment. pnfs_alloc_ds_commits_list() is leaking
the RCU lock.

Fixes: a9901899 ("pNFS: Add infrastructure for cleaning up per-layout commit structures")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Two types of #AC can be generated in Intel CPUs:
 1. legacy alignment check #AC
 2. split lock #AC

Reflect #AC back into the guest if the guest has legacy alignment checks
enabled or if split lock detection is disabled.

If the #AC is not a legacy one and split lock detection is enabled, then
invoke handle_guest_split_lock() which will either warn and disable split
lock detection for this task or force SIGBUS on it.

[ tglx: Switch it to handle_guest_split_lock() and rename the misnamed
  helper function. ]
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115517.176308876@linutronix.de