- 29 Jul, 2019 22 commits
-
-
Andy Shevchenko authored
The macro had never been used. The driver uses mostly the nfc_err(), which, with other macros in the family, is backed by corresponding dev_err(). pr_fmt() is not used for dev_err() macro. Moreover, there is no need to print the module name which is part of the device instance name anyway. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
There is no need to have a comma after terminator entry in the arrays of IDs. This may prevent the misguided addition behind the terminator without compiler notice. Drop the comma in terminator lines for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
There is no need to guard OF device ID table with of_match_ptr(). Otherwise we would get a defined but not used data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
The content of acpi_device_id is not supposed to change at runtime. All functions working with acpi_device_id provided by <linux/acpi.h> work with const acpi_device_id. So mark the non-const structs as const. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
Return directly in ->probe() since there no special cleaning is needed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
Since OF and ACPI case almost the same get rid of code duplication by moving gpiod_get() calls directly to ->probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
In order to unify GPIO resource request prepare gpiod_get_index() to behave correctly when there is no mapping provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
Since we got rid of platform data, the driver may use GPIO descriptor directly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
Legacy platform data must go away. We are on the safe side here since there are no users of it in the kernel. If anyone by any odd reason needs it the GPIO lookup tables and built-in device properties at your service. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
It seems a lot of laptops are equipped with NXP NFC300 chip with the ACPI ID NXP1001 as per DSDT. Append it to the driver's ACPI ID table. Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrey Konovalov authored
nfc_genl_deactivate_target() relies on the NFC_ATTR_TARGET_INDEX attribute being present, but doesn't check whether it is actually provided by the user. Same goes for nfc_genl_fw_download() and NFC_ATTR_FIRMWARE_NAME. This patch adds appropriate checks. Found with syzkaller. Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: some code optimizations & bugfixes & features This patch-set includes code optimizations, bugfixes and features for the HNS3 ethernet controller driver. [patch 1/10] checks reset status before setting channel. [patch 2/10] adds a NULL pointer checking. [patch 3/10] removes reset level upgrading when current reset fails. [patch 4/10] fixes a GFP flags errors when holding spin_lock. [patch 5/10] modifies firmware version format. [patch 6/10] adds some print information which is off by default. [patch 7/10 - 8/10] adds two code optimizations about interrupt handler and work task. [patch 9/10] adds support for using order 1 pages with a 4K buffer. [patch 10/10] modifies messages prints with dev_info() instead of pr_info(). Change log: V3->V4: replace netif_info with netif_dbg in [patch 6/10] V2->V3: fixes comments from Saeed Mahameed and Joe Perches. V1->V2: fixes comments from Saeed Mahameed and removes previous [patch 4/11] and [patch 11/11] which needs further discussion, and adds a new patch [10/10] suggested by Saeed Mahameed. ==================== Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
dev_info() is more appropriate for printing messages when driver initialization done, so switch to dev_info(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
Hardware supports 0.5K, 1K, 2K, 4K RX buffer size, the RX buffer can not be reused because the hns3_page_order return 0 when page size and RX buffer size are both 4096. So this patch changes the hns3_page_order to return 1 when RX buffer is greater than half of the page size and page size is less the 8192, and dev_alloc_pages has already been used to allocate the compound page for RX buffer. This patch also changes hnae3_* to hns3_* for page order and RX buffer size calculation because they are used in hns3 module. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
The misc interrupt is used to schedule the reset and mailbox subtask, and service_task delayed_work is used to do periodic management work each second. This patch sets the above three subtask's affinity using the misc interrupt' affinity. Also this patch setups a affinity notify for misc interrupt to allow user to change the above three subtask's affinity. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
Use delayed work instead of using timers to trigger the hclge_serive. Simplify the code with one less middle function and in order to support misc irq affinity. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yonglong Liu authored
Some times just see the eth interface have been down/up via dmesg, but can not know why the eth down. So adds some debug messages to identify the cause for this. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yufeng Mo authored
This patch modifies firmware version display format in hclge(vf)_cmd_init() and hns3_get_drvinfo(). Also, adds some optimizations for firmware version display format. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yufeng Mo authored
When allocating memory, the GFP_KERNEL cannot be used during the spin_lock period. This is because it may cause scheduling when holding spin_lock. This patch changes GFP flag to GFP_ATOMIC in this case. Fixes: dd74f815 ("net: hns3: Add support for rule add/delete for flow director") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: lipeng 00277521 <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
Currently, hclge_reset_err_handle() will assert a global reset when the failing count is smaller than MAX_RESET_FAIL_CNT, which will affect other running functions. So this patch removes this upgrading, and uses re-scheduling reset task to do it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guangbin Huang authored
For some cases, ops->get_reset_level may not be implemented, so we should check whether it is NULL before calling get_reset_level. Signed-off-by: Guangbin Huang <huangguangbin@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
hns3_set_channels() should check the resetting status firstly, since the device will reinitialize when resetting. If the reset has not completed, the hns3_set_channels() may access invalid memory. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Jul, 2019 16 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: spectrum_acl: Forbid unsupported filters Patches #1-#2 make mlxsw reject unsupported egress filters. These include filters that match on VLAN and filters associated with a redirect action. Patch #1 rejects such filters when they are configured on egress and patch #2 rejects such filters when they are configured in a shared block that user tries to bind to egress. Patch #3 forbids matching on reserved TCP flags as this is not supported by the current keys that mlxsw uses. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Matching on reserved TCP flags bits is only supported using custom parser. Since the usecase for that is not known now, just forbid to offload rules that match on these bits. Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Some matches and actions are not supported on egress. Track such rules and forbid a bind of block which contains them to egress. With this patch, the kernel tells the user he cannot do that: $ tc qdisc add dev ens16np1 ingress_block 22 clsact $ tc filter add block 22 protocol 802.1q pref 2 handle 101 flower vlan_id 100 skip_sw action pass $ tc qdisc add dev ens16np2 egress_block 22 clsact Error: mlxsw_spectrum: Block cannot be bound to egress because it contains unsupported rules. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Spectrum ASIC does not support redirection on egress, so refuse to insert such flows: $ tc qdisc add dev ens16np1 clsact $ tc filter add dev ens16np1 egress protocol all pref 1 handle 101 flower skip_sw action mirred egress redirect dev ens16np2 Error: mlxsw_spectrum: Redirect action is not supported on egress. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: improve HW csum and TSO handling This series: - delegates more tasks from the driver to the core - enables HW csum and TSO per default - copies quirks for buggy chip versions from vendor driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Enable HW csum and TSO per default except on known buggy chip versions. Realtek confirmed that RTL8168evl has a HW issue with TSO. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
The loop in r8169_csum_workaround is called only if in msdn_giant_send_check a copy of the skb header needs to be made and we don't have enough memory. Let's simply drop the packet in that case so that we can remove r8169_csum_workaround. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Implement callback ndo_features_check and move all feature checks there. This will allow us to get rid of r8169_csum_workaround() completely in a subsequent step. Like in the vendor driver disable HW csum for short packets on RTL8168b. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Set GSO max size and max segment number as in the vendor driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jonathan Lemon authored
ipv6_find_hdr() prints a non-rate limited error message when it cannot find an ipv6 header at a specific offset. This could be used as a DoS, so just remove it. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Align setting PME with the vendor driver. PMEnable is writable on RTL8169 only, on later chip versions it's read-only. PME_SIGNAL is used on chip versions from RTL8168evl with the exception of the RTL8168f family. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
ConnectX-3 Pro can offload transmission of VLAN packets with VXLAN inside: enable tunnel offloads in dev->vlan_features, like it's done with other NIC drivers (e.g. be2net and ixgbe). It's no more necessary to change dev->hw_enc_features when VXLAN are added or removed, since .ndo_features_check() already checks for VXLAN packet where the UDP destination port matches the configured value. Just set dev->hw_enc_features when the NIC is initialized, so that overlying VLAN can correctly inherit the tunnel offload capabilities. Changes since v1: - avoid flipping hw_enc_features, instead of calling netdev notifiers, thanks to Saeed Mahameed - squash two patches into a single one CC: Paolo Abeni <pabeni@redhat.com> CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nathan Chancellor authored
When CONFIG_ACPI is unset (arm allyesconfig), status is unused. drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c:383:14: warning: unused variable 'status' [-Wunused-variable] acpi_status status; ^ drivers/net/ethernet/apm/xgene/xgene_enet_sgmac.c:440:14: warning: unused variable 'status' [-Wunused-variable] acpi_status status; ^ drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:697:14: warning: unused variable 'status' [-Wunused-variable] acpi_status status; ^ Move the declaration into the CONFIG_ACPI block so that there are no compiler warnings. Fixes: 570d785b ("drivers: net: xgene: Remove acpi_has_method() calls") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thierry Reding authored
The stmmaceth clock is specified by the slave_bus and apb_pclk clocks in the device tree bindings for snps,dwc-qos-ethernet-4.10 compatible nodes of this IP. The subdrivers for these bindings will be requesting the stmmac clock correctly at a later point, so there is no need to request it here and cause an error message to be printed to the kernel log. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thierry Reding authored
The Tegra EQOS driver already resets the MDIO bus at probe time via the reset GPIO specified in the phy-reset-gpios device tree property. There is no need to reset the bus again later on. This avoids the need to query the device tree for the snps,reset GPIO, which is not part of the Tegra EQOS device tree bindings. This quiesces an error message from the generic bus reset code if it doesn't find the snps,reset related delays. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The variable bucket is being initialized with a value that is never read and it is being updated later with a new value in a following for-loop. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Jul, 2019 2 commits
-
-
Sergej Benilov authored
Implement ethtool's EEPROM dump command (ethtool -e|--eeprom-dump). Thx to Andrew Lunn for comments. Signed-off-by: Sergej Benilov <sergej.benilov@googlemail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
drivers/staging/octeon/ethernet-tx.c:287:23: error: implicit declaration of function 'skb_drag_size'; did you mean 'skb_frag_size'? [-Werror=implicit-function-declaration] From kernelci report: https://kernelci.org/build/id/5d3943f859b514103f688918/logs/ Fixes: 92493a2f ("Build fixes for skb_frag_size conversion") Signed-off-by: David S. Miller <davem@davemloft.net>
-