Refactor this function into two new functions in order to reduce the indent
levels and clean up the ugly line breaks that, unsuccessfully, try to keep
the lines < 80 chars.

The first function handles the irq for a specific asic.

The second function handles the irq for a specific subdevice that is
associated with the asic.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'subpriv' macro relies on a local variable having a specific name.
Replace the macro with a local variable where used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The gdm72xx driver needs to have either the USB or SDIO implementation
enabled to provide useful functionalities, so the driver should depend
on either USB or MMC. This patch makes WIMAX_GDM72XX depend on either
USB or MMC.

Also, WIMAX_GDM72XX needs to be built as a module if its dependent
interface, either USB or MMC, is built as a module. This patch enforces
that in the WIMAX_GDM72XX_USB and WIMAX_GDM72XX_SDIO dependency.
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed a linebreak within an error message string coding style
issue reported by checkpatch.pl and dev_err format parameters
Signed-off-by: Matthias Schid <aircrach115@gmail.com>
Signed-off-by: Stefan Huber <steffhip@googlemail.com>
Signed-off-by: Simon Puels <simon.puels@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

replaced spaces in incorrect alignment in defines with tabs
Signed-off-by: Matthias Schid <aircrach115@gmail.com>
Signed-off-by: Stefan Huber <steffhip@googlemail.com>
Signed-off-by: Simon Puels <simon.puels@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

device_register is called before platform_device_register_simple gets called.
unregister and reset the octeon_usb_registered variable

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

the return value is a pointer having an error set. we have to check for
IS_ERR and return PTR_ERR when appropriate

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

place the opening brace right after the if, else, else if, switch
statements.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

place the opening brace right after the if,else, else if,switch
statements.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

this places the opening braces just after the if, else, elseif, switch
statements

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

this fixes coding style problem, placing of the braces just right after the
struct name, not below the struct name.

this reduces the errors reported by checkpatch script from

total: 1496 errors, 2133 warnings, 3344 lines checked

to

total: 1488 errors, 2132 warnings, 3336 lines checked

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 52f63175.

It's still broken, especially for a simple build on x86 with 'make
allmodconfig'

As no fixes seem forthcoming, just mark it broken.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I accidentally reversed the sense of the error check after the call to
dt_statfs() in lprocfs_dt_rd_{blksize,{files,kbytes}{free,avail}.
Unreverse the error checking.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3300
Lustre-change: http://review.whamcloud.com/6385Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Robert Read <robert.read@intel.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch.pl reports 2 errors about trailing whitespace in this file.
Fix them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Sensoray Model 526 board is a PC/104 style board not a PCI board.
Move it into the correct group in the Kconfig and Makefile.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes identation and alignment in r8192U_core.c.
Also, removes spaces from idents when applicable.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter<dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following checkpatch warning:
WARNING: Avoid unnecessary line continuations
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter<dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the function definitions' style in order
to be uniform across the file and in compliance with the
linux kernel coding style.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter<dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the position of braces and removes
redundant braces, following the kernel coding style
conventions.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter<dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This cleanup patch removes commented-out code and
the functions rtl8192_dump_reg() and print_buffer()
which are not called anywhere in the driver.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter<dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 812eb995.

I shouldn't have applied it, my fault...

Cc: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit c3147965.

I shouldn't have applied it, my fault.

Cc: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 91c6c4bd.

It wasn't supposed to be applied, my fault.

Cc: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 5109c8a0.

I shouldn't have applied this, my fault...

Cc: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix up a sparse warning about sync_dump that was reported.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Erik Gilling <konkers@android.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for Octeon USB HCD. Tested on EdgeRouter Lite with USB
mass storage.

The driver has been extracted from GPL sources of EdgeRouter Lite firmware
(based on Linux 2.6.32.13). Some minor fixes and cleanups have been done
to make it work with 3.10-rc3.

$ uname -a
Linux (none) 3.10.0-rc3-edge-00005-g86cb5bc #41 SMP PREEMPT Sat Jun 1 20:41:46 EEST 2013 mips64 GNU/Linux
$ modprobe octeon-usb
[   37.971683] octeon_usb: module is from the staging directory, the quality is unknown, you have been warned.
[   37.983649] OcteonUSB: Detected 1 ports
[   37.999360] OcteonUSB OcteonUSB.0: Octeon Host Controller
[   38.004847] OcteonUSB OcteonUSB.0: new USB bus registered, assigned bus number 1
[   38.012332] OcteonUSB OcteonUSB.0: irq 122, io mem 0x00000000
[   38.019970] hub 1-0:1.0: USB hub found
[   38.023851] hub 1-0:1.0: 1 port detected
[   38.028101] OcteonUSB: Registered HCD for port 0 on irq 122
[   38.391443] usb 1-1: new high-speed USB device number 2 using OcteonUSB
[   38.586922] usb-storage 1-1:1.0: USB Mass Storage device detected
[   38.597375] scsi0 : usb-storage 1-1:1.0
[   39.604111] scsi 0:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
[   39.619113] sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB)
[   39.630696] sd 0:0:0:0: [sda] Write Protect is off
[   39.635945] sd 0:0:0:0: [sda] No Caching mode page present
[   39.641464] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   39.651341] sd 0:0:0:0: [sda] No Caching mode page present
[   39.656917] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   39.664296]  sda: sda1 sda2
[   39.675574] sd 0:0:0:0: [sda] No Caching mode page present
[   39.681093] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   39.687223] sd 0:0:0:0: [sda] Attached SCSI removable disk
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

the _probe function doesn't run in interrupt context, so no need to use
the GFP_ATOMIC allocations, instead driver can request for GFP_KERNEL
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Check to see if allocation by kzalloc() or usb_alloc_urb() was unsuccessful
immediately after the allocation. Exit from the function can be right at that
point in case of allocation failure.
This avoids unnecessary use of usb_alloc_urb() & usb_free_urb() if kzalloc()
returns NULL.
Also, makes the code better structured & easier to understand.
Signed-off-by: Harsh Kumar <harsh1kumar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pci_enable_device() will set device power state to D0,
so it's no need to do it again in dwc2_driver_probe().
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We already established earlier in the function that "temp" is
non-NULL.  We also don't need to set to NULL because it's a stack
variable an we return immediately.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using correct transfer interval as specified by the USB endpoint
when doing the interrupt transfer fixes the warning printed by
xhci USB core on every transfer that resulted in spamming
"xhci_queue_intr_tx: 74 callbacks suppressed" to syslog
every 5 seconds.
Signed-off-by: Marcus Overhagen <marcus.overhagen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The timeout detection implemented in this driver isn't very
robust. Although the USB interrupt transfer was successful,
the polling thread often reported timeouts because the 50ms
had expired before it got scheduled, and the SD card wasn't
detected. Increasing it to 100ms, as used in other places of
this driver, makes it work.
Signed-off-by: Marcus Overhagen <marcus.overhagen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In case of error, the function sock_alloc_file() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Those are simple wrappers for numa allocator. We don't need them.
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It was emptied by coan. So drop it.
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is not used any more.
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It was emptied by coan. So we no longer need it.
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

got bellow build warning that is indeed a false alarm.

  CC [M]  drivers/staging/lustre/lustre/llite/llite_nfs.o
  drivers/staging/lustre/lustre/libcfs/nidstrings.c: In function ‘
  libcfs_str2net_internal’:
  drivers/staging/lustre/lustre/libcfs/nidstrings.c:432:17: warning: ‘nf’ may be
  used uninitialized in this function [-Wuninitializ
  ed]
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

filp_user_write() is open coded in libcfs_kkuc_msg_put(). All
other functions/macros have no user at all. So we can remove
the file.
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>