- 25 Jul, 2014 4 commits
-
-
Christoph Hellwig authored
The blk-mq code path will set this to a different function, so make the code simpler by setting it up in a legacy-request specific place. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Webb Scales <webbnh@hp.com> Acked-by:
Jens Axboe <axboe@kernel.dk> Tested-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
Robert Elliott <elliott@hp.com>
-
Christoph Hellwig authored
Make sure we only have the logic for requeing commands in one place. Signed-off-by:
-
Christoph Hellwig authored
Factor out a helper to set the _blocked values, which we'll reuse for the blk-mq code path. Signed-off-by:
-
Christoph Hellwig authored
Factor out command setup code that will be shared with the blk-mq code path. Signed-off-by:
-
- 17 Jul, 2014 36 commits
-
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Factor out a function to initialize regular read/write commands and leave sd_init_command as a simple dispatcher to the different prepare routines. Signed-off-by:
-
Christoph Hellwig authored
Currently cmd->allowed is initialized from rq->retries for discard commands, but retries is always 0 for non-BLOCK_PC requests. Set it to the standard number of retries instead. Signed-off-by:
-
Christoph Hellwig authored
Currently cmd->allowed is initialized from rq->retries for write same commands, but retries is always 0 for non-BLOCK_PC requests. Set it to the standard number of retries instead. Signed-off-by:
-
Christoph Hellwig authored
Simplify handling of discard requests by setting up the command directly instead of initializing request fields and then calling scsi_setup_blk_pc_cmnd to propagate the information into the command. Signed-off-by:
-
Christoph Hellwig authored
Simplify handling of write same requests by setting up the command directly instead of initializing request fields and then calling scsi_setup_blk_pc_cmnd to propagate the information into the command. Signed-off-by:
-
Christoph Hellwig authored
Simplify handling of flush requests by setting up the command directly instead of initializing request fields and then calling scsi_setup_blk_pc_cmnd to propagate the information into the command. Also rename scsi_setup_flush_cmnd to sd_setup_flush_cmnd for consistency. Signed-off-by:
-
Christoph Hellwig authored
The data direction fiel in the SCSI command is derived only from the block request structure. Move setting it up into common code instead of duplicating it in the ULDs. Signed-off-by:
-
Christoph Hellwig authored
We should call the device handler prep_fn for all TYPE_FS requests, not just simple read/write calls that are handled by the disk driver. Restructure the common I/O code to call the prep_fn handler and zero out the CDB, and just leave the call to scsi_init_io to the ULDs. Signed-off-by:
-
Christoph Hellwig authored
scsi_init_io should only be called for requests that transfer data, so move the assert that a request has segments from the callers into scsi_init_io. Signed-off-by:
-
Maurizio Lombardi authored
During IO with fabric faults, one generally sees several "Unhandled error code" messages in the syslog as shown below: sd 4:0:6:2: [sdbw] Unhandled error code sd 4:0:6:2: [sdbw] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK sd 4:0:6:2: [sdbw] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 end_request: I/O error, dev sdbw, sector 0 This comes from scsi_io_completion (in scsi_lib.c) while handling error codes other than DID_RESET or not deferred sense keys i.e. this is actually handled by the SCSI mid layer. But what gets displayed here is "Unhandled error code" which is quite misleading as it indicates something that is not addressed by the mid layer. The description string is based on the sense key and sometimes on the additional sense code; since the ACTION_FAIL case always prints the sense key and the additional sense code, this patch removes the description string completely because it does not add useful information. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Reviewed-by:
-
Douglas Gilbert authored
While checking what scsi_adjust_queue_depth() did I thought its switch statement could be clearer: - remove redundant assignment (to sdev->queue_depth) - re-order cases (thus removing the fall-through) Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
-
Christoph Hellwig authored
Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Because of the removal of the scsi_tgt kernel module, the kbuild variables CONFIG_SCSI_TGT, CONFIG_SCSI_SRP_TGT_ATTRS and CONFIG_SCSI_FC_TGT_ATTRS are obsolete. This patch removes these variables. This patch is the result of the following command: find -name '*defconfig' | while read f; do grep -vwE 'CONFIG_SCSI_TGT|CONFIG_SCSI_SRP_TGT_ATTRS|CONFIG_SCSI_FC_TGT_ATTRS|CONFIG_SRP' $f >/tmp/t && mv /tmp/t $f; done Signed-off-by:
-
Bart Van Assche authored
Now that the ibmvstgt driver as the only user of scsi_tgt is gone, the scsi_tgt kernel module, the CONFIG_SCSI_TGT, CONFIG_SCSI_SRP_TGT_ATTRS and CONFIG_SCSI_FC_TGT_ATTRS kbuild variable, the scsi_host_template transfer_response method are no longer needed. [hch: minor updates to the current tree, changelog update] Signed-off-by:
-
Christoph Hellwig authored
Remove the libsrp module which was only used by the now removed ibmvstgt driver. Signed-off-by:
-
Christoph Hellwig authored
The IBM virtual SCSI protocol has been obsoleted by ibmvfc, and there are no reported of the driver left. Signed-off-by:
-
Hannes Reinecke authored
Using dev_printk variants prefixes the logging message with the originating device, which makes debugging easier. Signed-off-by:
-
Hannes Reinecke authored
Signed-off-by:
-
Hannes Reinecke authored
Update the st driver to use dev_printk() variants instead of plain printk(); this will prefix logging messages with the appropriate device. Signed-off-by:
-
Hannes Reinecke authored
Update the ch driver to use dev_printk() variants instead of plain printk(); this will prefix logging messages with the appropriate device. Signed-off-by:
-
Hannes Reinecke authored
Update the sg driver to use dev_printk() variants instead of plain printk(); this will prefix logging messages with the appropriate device. Signed-off-by:
-
Hannes Reinecke authored
Update the sr driver to use dev_printk() variants instead of plain printk(); this will prefix logging messages with the appropriate device. Signed-off-by:
-
Hannes Reinecke authored
scsilun_to_int() has an error which prevents it from generating correct LUN numbers for 64bit values. Also we should remove the misleading comment about portions of the LUN being ignored; the initiator should treat the LUN as an opaque value. And, finally, the example given should use the correct prefix (here: extended flat space addressing scheme). This patch includes the modifications suggested by Bart van Assche. Cc: Bart van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
James Bottomley <jbottomley@parallels.com> Signed-off-by:
-
Hannes Reinecke authored
Now that we're using 64-bit LUNs internally we need to increase the size of max_luns to 64 bits, too. Signed-off-by:
Christoph Hellwig <hch@infradead.org> Reviewed-by:
Ewan Milne <emilne@redhat.com> Signed-off-by:
-
Hannes Reinecke authored
Some driver might want to pass in an 64-bit value, so introduce a module param type 'ullong'. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Hannes Reinecke authored
The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by:
-
Hannes Reinecke authored
Older HBAs are only capable of supporting 16-bit LUNs, so we need to make sure to adjust max_lun accordingly. Signed-off-by:
Chad Dupuis <chad.dupuis@qlogic.com> Reviewed-by:
-
Hannes Reinecke authored
Sequential scan for more than 256 LUNs is very fragile as LUNs might not be numbered sequentially after that point. SAM revisions later than SCSI-3 impose a structure on LUNs larger than 256, making LUN numbers between 256 and 16384 illegal. SCSI-3, however allows for plain 64-bit numbers with no internal structure. So restrict sequential LUN scan to 256 LUNs and add a new blacklist flag 'BLIST_SCSI3LUN' to scan up to max_lun devices. Signed-off-by:
-
Hannes Reinecke authored
Obsolete; either use 'max_lun' if the host supports only a limited number of LUNs or BLIST_NOLUN if the target has problems addressing more than one LUN. Signed-off-by:
-
Douglas Gilbert authored
This addresses a problem reported by Vaughan Cao concerning the correctness of the O_EXCL logic in the sg driver. POSIX doesn't defined O_EXCL semantics on devices but "allow only one open file descriptor at a time per sg device" is a rough definition. The sg driver's semantics have been to wait on an open() when O_NONBLOCK is not given and there are O_EXCL headwinds. Nasty things can happen during that wait such as the device being detached (removed). So multiple locks are reworked in this patch making it large and hard to break down into digestible bits. This patch is against Linus's current git repository which doesn't include any sg patches sent in the last few weeks. Hence this patch touches as little as possible that it doesn't need to and strips out most SCSI_LOG_TIMEOUT() changes in v3 because Hannes said he was going to rework all that stuff. The sg3_utils package has several test programs written to test this patch. See examples/sg_tst_excl*.cpp . Not all the locks and flags in sg have been re-worked in this patch, notably sg_request::done . That can wait for a follow-up patch if this one meets with approval. Signed-off-by:
-
Douglas Gilbert authored
When the SG_IO ioctl was copied into the block layer and later into the bsg driver, subtle differences emerged. One difference is the way injected commands are queued through the block layer (i.e. this is not SCSI device queueing nor SATA NCQ). Summarizing: - SG_IO in the block layer: blk_exec*(at_head=false) - sg SG_IO: at_head=true - bsg SG_IO: at_head=true Some time ago Boaz Harrosh introduced a sg v4 flag called BSG_FLAG_Q_AT_TAIL to override the bsg driver default. This patch does the equivalent for the sg driver. ChangeLog: Introduce SG_FLAG_Q_AT_TAIL flag to cause commands to be injected into the block layer with at_head=false. Signed-off-by:Mike Christie <michaelc@cs.wisc.edu> Reviewed-by:
-
Douglas Gilbert authored
- remove the 16 byte CDB (SCSI command) length limit from the sg driver by handling longer CDBs the same way as the bsg driver. Remove comment from sg.h public interface about the cmd_len field being limited to 16 bytes. - remove some dead code caused by this change - cleanup comment block at the top of sg.h, fix urls Signed-off-by:
-
Martin K. Petersen authored
Until now the per-command transfer length has exclusively been gated by the max_sectors parameter in the scsi_host template. Given that the size of this parameter has been bumped to an unsigned int we have to be careful not to exceed the target device's capabilities. If the if the device specifies a Maximum Transfer Length in the Block Limits VPD we'll use that value. Otherwise we'll use 0xffffffff for devices that have use_16_for_rw set and 0xffff for the rest. We then combine the chosen disk limit with max_sectors in the host template. The smaller of the two will be used to set the max_hw_sectors queue limit. Signed-off-by:
-
Clément Calmels authored
In init_sd function, if kmem_cache_create or mempool_create_slab_pools calls fail, the error will not be correclty reported because class_register previously set the value of err to 0. Signed-off-by:
Clément Calmels <clement.calmels@free.fr> Reviewed-by:
-
Vaughan Cao authored
This is a fix for commit 39c60a09 "sd: fix array cache flushing bug causing performance problems" We must notify the block layer via q->flush_flags after a temporary change of the cache_type to write through. Without this, a SYNCHRONIZE CACHE command will still be generated. This patch factors out a helper that can be called from sd_revalidate_disk and cache_type_store. Signed-off-by:
Vaughan Cao <vaughan.cao@oracle.com> Reviewed-by:
-
