- 28 Oct, 2012 40 commits
-
-
David S. Miller authored
[ Upstream commit 2856cc2e ] On a 2-node machine with 256GB of ram we get 512 lines of console output, which is just too much. This mimicks Yinghai Lu's x86 commit c2b91e2e (x86_64/mm: check and print vmemmap allocation continuous) except that we aren't ever going to get contiguous block pointers in between calls so just print when the virtual address or node changes. This decreases the output by an order of 16. Also demote this to KERN_DEBUG. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Kosina authored
[ Upstream commit a27032ee ] There are multiple errors in how sys_sparc64_personality() handles personality flags stored in top three bytes. - directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. - directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Fix the first one by properly using personality() macro to compare only PER_MASK bytes. Fix the second one by setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
David S. Miller authored
[ Upstream commit e793d8c6 ] There was a serious disconnect in the logic happening in sparc_pmu_disable_event() vs. sparc_pmu_enable_event(). Event disable is implemented by programming a NOP event into the PCR. However, event enable was not reversing this operation. Instead, it was setting the User/Priv/Hypervisor trace enable bits. That's not sparc_pmu_enable_event()'s job, that's what sparc_pmu_enable() and sparc_pmu_disable() do . The intent of sparc_pmu_enable_event() is clear, since it first clear out the event type encoding field. So fix this by OR'ing in the event encoding rather than the trace enable bits. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 08280e6c ] If the MM is not active, only report the top-level PC. Do not try to access the address space. Signed-off-by:
-
Al Viro authored
[ Upstream commit 55c2770e ] we want syscall_trace_leave() called on exit from any syscall; skipping its call in case we'd done force_successful_syscall_return() is broken... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9f0d3c27 ] Commit 1d578303 (ipv6/addrconf: speedup /proc/net/if_inet6 filling) added bugs hiding some devices from if_inet6 and breaking applications. "ip -6 addr" could still display all IPv6 addresses, while "ifconfig -a" couldnt. One way to reproduce the bug is by starting in a shell : unshare -n /bin/bash ifconfig lo up And in original net namespace, lo device disappeared from if_inet6 Reported-by:
Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Tested-by:
Eric Dumazet <edumazet@google.com> Cc: Mihai Maruseac <mihai.maruseac@gmail.com> Signed-off-by:
-
Alexey Kuznetsov authored
[ Upstream commit 4c675258 ] After commit e2446eaa ("tcp_v4_send_reset: binding oif to iif in no sock case").. tcp resets are always lost, when routing is asymmetric. Yes, backing out that patch will result in misrouting of resets for dead connections which used interface binding when were alive, but we actually cannot do anything here. What's died that's died and correct handling normal unbound connections is obviously a priority. Comment to comment: > This has few benefits: > 1. tcp_v6_send_reset already did that. It was done to route resets for IPv6 link local addresses. It was a mistake to do so for global addresses. The patch fixes this as well. Actually, the problem appears to be even more serious than guaranteed loss of resets. As reported by Sergey Soloviev <sol@eqv.ru>, those misrouted resets create a lot of arp traffic and huge amount of unresolved arp entires putting down to knees NAT firewalls which use asymmetric routing. Signed-off-by:
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by:
-
jeff.liu authored
[ Upstream commit 5175a5e7 ] This is the revised patch for fixing rds-ping spinlock recursion according to Venkat's suggestions. RDS ping/pong over TCP feature has been broken for years(2.6.39 to 3.6.0) since we have to set TCP cork and call kernel_sendmsg() between ping/pong which both need to lock "struct sock *sk". However, this lock has already been hold before rds_tcp_data_ready() callback is triggerred. As a result, we always facing spinlock resursion which would resulting in system panic. Given that RDS ping is only used to test the connectivity and not for serious performance measurements, we can queue the pong transmit to rds_wq as a delayed response. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> CC: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> CC: David S. Miller <davem@davemloft.net> CC: James Morris <james.l.morris@oracle.com> Signed-off-by:
Jie Liu <jeff.liu@oracle.com> Signed-off-by:
-
Florian Zumbiehl authored
[ Upstream commit 48cc32d3 ] 6a32e4f9 made the vlan code skip marking vlan-tagged frames for not locally configured vlans as PACKET_OTHERHOST if there was an rx_handler, as the rx_handler could cause the frame to be received on a different (virtual) vlan-capable interface where that vlan might be configured. As rx_handlers do not necessarily return RX_HANDLER_ANOTHER, this could cause frames for unknown vlans to be delivered to the protocol stack as if they had been received untagged. For example, if an ipv6 router advertisement that's tagged for a locally not configured vlan is received on an interface with macvlan interfaces attached, macvlan's rx_handler returns RX_HANDLER_PASS after delivering the frame to the macvlan interfaces, which caused it to be passed to the protocol stack, leading to ipv6 addresses for the announced prefix being configured even though those are completely unusable on the underlying interface. The fix moves marking as PACKET_OTHERHOST after the rx_handler so the rx_handler, if there is one, sees the frame unchanged, but afterwards, before the frame is delivered to the protocol stack, it gets marked whether there is an rx_handler or not. Signed-off-by:
Florian Zumbiehl <florz@florz.de> Signed-off-by:
-
Graham Gower authored
[ Upstream commit a2af139f ] Marvell 88E8001 on an ASUS P5NSLI motherboard is unable to send/receive packets on a system with >4gb ram unless a 32bit DMA mask is used. This issue has been around for years and a fix was sent 3.5 years ago, but there was some debate as to whether it should instead be fixed as a PCI quirk. http://www.spinics.net/lists/netdev/msg88670.html However, 18 months later a similar workaround was introduced for another chipset exhibiting the same problem. http://www.spinics.net/lists/netdev/msg142287.htmlSigned-off-by:
Graham Gower <graham.gower@gmail.com> Signed-off-by:
Jan Ceuleers <jan.ceuleers@computer.org> Acked-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
ramesh.nagappa@gmail.com authored
[ Upstream commit e1f16503 ] The retry loop in neigh_resolve_output() and neigh_connected_output() call dev_hard_header() with out reseting the skb to network_header. This causes the retry to fail with skb_under_panic. The fix is to reset the network_header within the retry loop. Signed-off-by:
Ramesh Nagappa <ramesh.nagappa@ericsson.com> Reviewed-by:
Shawn Lu <shawn.lu@ericsson.com> Reviewed-by:
Robert Coulson <robert.coulson@ericsson.com> Reviewed-by:
Billie Alsup <billie.alsup@ericsson.com> Signed-off-by:
-
Gao feng authored
[ Upstream commit 809d5fc9 ] set netlink_dump_control.module to avoid panic. Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Signed-off-by:
-
Gao feng authored
[ Upstream commit 6dc878a8 ] I get a panic when I use ss -a and rmmod inet_diag at the same time. It's because netlink_dump uses inet_diag_dump which belongs to module inet_diag. I search the codes and find many modules have the same problem. We need to add a reference to the module which the cb->dump belongs to. Thanks for all help from Stephen,Jan,Eric,Steffen and Pablo. Change From v3: change netlink_dump_start to inline,suggestion from Pablo and Eric. Change From v2: delete netlink_dump_done,and call module_put in netlink_dump and netlink_sock_destruct. Signed-off-by:
-
Devin Heitmueller authored
commit a595c1ce upstream. We weren't checking whether the resource was in use before calling res_free(), so applications which called STREAMOFF on a v4l2 device that wasn't already streaming would cause a BUG() to be hit (MythTV). Reported-by:
Larry Finger <larry.finger@lwfinger.net> Reported-by:
Jay Harbeston <jharbestonus@gmail.com> Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Felipe Balbi authored
commit 041d81f4 upstream. If a USB transfer has already been started, meaning we have already issued StartTransfer command to that particular endpoint, DWC3_EP_BUSY flag has also already been set. When we try to cancel this transfer which is already in controller's cache, we will not receive XferComplete event and we must clear DWC3_EP_BUSY in order to allow subsequent requests to be properly started. The best place to clear that flag is right after issuing DWC3_DEPCMD_ENDTRANSFER. Reported-by:
Moiz Sonasath <m-sonasath@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Andrew Morton authored
commit 168bfeef upstream. If none of the elements in scrubrates[] matches, this loop will cause __amd64_set_scrub_rate() to incorrectly use the n+1th element. As the function is designed to use the final scrubrates[] element in the case of no match, we can fix this bug by simply terminating the array search at the n-1th element. Boris: this code is fragile anyway, see here why: http://marc.info/?l=linux-kernel&m=135102834131236&w=2 It will be rewritten more robustly soonish. Reported-by:
Denis Kirjanov <kirjanov@gmail.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> Signed-off-by:
-
Hiro Sugawara authored
commit d0078e72 upstream. Fix a deadly typo in macro definition. Signed-off-by:
Hiro Sugawara <hsugawara@nvidia.com> Signed-off-by:
Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Pritesh Raithatha authored
commit 154f3ebf upstream. Signed-off-by:
Pritesh Raithatha <praithatha@nvidia.com> Acked-by:
Stephen Warren <swarren@nvidia.com> Tested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Pritesh Raithatha authored
commit a03690e4 upstream. Signed-off-by:
-
Tejun Heo authored
commit 9bb71308 upstream. This reverts commit 7e381b0e. The commit incorrectly assumed that fork path always performed threadgroup_change_begin/end() and depended on that for synchronization against task exit and cgroup migration paths instead of explicitly grabbing task_lock(). threadgroup_change is not locked when forking a new process (as opposed to a new thread in the same process) and even if it were it wouldn't be effective as different processes use different threadgroup locks. Revert the incorrect optimization. Signed-off-by:
Tejun Heo <tj@kernel.org> LKML-Reference: <20121008020000.GB2575@localhost> Acked-by:
Li Zefan <lizefan@huawei.com> Bitterly-Acked-by:
Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
-
Tejun Heo authored
commit d8783832 upstream. This reverts commit 7e3aa30a. The commit incorrectly assumed that fork path always performed threadgroup_change_begin/end() and depended on that for synchronization against task exit and cgroup migration paths instead of explicitly grabbing task_lock(). threadgroup_change is not locked when forking a new process (as opposed to a new thread in the same process) and even if it were it wouldn't be effective as different processes use different threadgroup locks. Revert the incorrect optimization. Signed-off-by:
-
Daisuke Nishimura authored
commit 1f5320d5 upstream. notify_on_release must be triggered when the last process in a cgroup is move to another. But if the first(and only) process in a cgroup is moved to another, notify_on_release is not triggered. # mkdir /cgroup/cpu/SRC # mkdir /cgroup/cpu/DST # # echo 1 >/cgroup/cpu/SRC/notify_on_release # echo 1 >/cgroup/cpu/DST/notify_on_release # # sleep 300 & [1] 8629 # # echo 8629 >/cgroup/cpu/SRC/tasks # echo 8629 >/cgroup/cpu/DST/tasks -> notify_on_release for /SRC must be triggered at this point, but it isn't. This is because put_css_set() is called before setting CGRP_RELEASABLE in cgroup_task_migrate(), and is a regression introduce by the commit:74a1166d(cgroups: make procs file writable), which was merged into v3.0. Acked-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by:
-
Bjørn Mork authored
commit 4b35f1c5 upstream. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
commit 1452df6f upstream. Based on information from the ZTE Windows drivers. Signed-off-by:
-
Alexis R. Cortes authored
commit 47080974 upstream. This minor change adds a new system to which the "Fix Compliance Mode on SN65LVPE502CP Hardware" patch has to be applied also. System added: Vendor: Hewlett-Packard. System Model: Z1 Signed-off-by:
Alexis R. Cortes <alexis.cortes@ti.com> Acked-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Nicolas Boullis authored
commit 301a29da upstream. The current code assumes that CSIZE is 0000060, which appears to be wrong on some arches (such as powerpc). Signed-off-by:
Nicolas Boullis <nboullis@debian.org> Acked-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Ming Lei authored
commit c5211187 upstream. If the write endpoint is interrupt type, usb_sndintpipe() should be passed to usb_fill_int_urb() instead of usb_sndbulkpipe(). Signed-off-by:
Ming Lei <ming.lei@canonical.com> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
David Vrabel authored
commit a349e23d upstream. In 32 bit guests, if a userspace process has %eax == -ERESTARTSYS (-512) or -ERESTARTNOINTR (-513) when it is interrupted by an event /and/ the process has a pending signal then %eip (and %eax) are corrupted when returning to the main process after handling the signal. The application may then crash with SIGSEGV or a SIGILL or it may have subtly incorrect behaviour (depending on what instruction it returned to). The occurs because handle_signal() is incorrectly thinking that there is a system call that needs to restarted so it adjusts %eip and %eax to re-execute the system call instruction (even though user space had not done a system call). If %eax == -514 (-ERESTARTNOHAND (-514) or -ERESTART_RESTARTBLOCK (-516) then handle_signal() only corrupted %eax (by setting it to -EINTR). This may cause the application to crash or have incorrect behaviour. handle_signal() assumes that regs->orig_ax >= 0 means a system call so any kernel entry point that is not for a system call must push a negative value for orig_ax. For example, for physical interrupts on bare metal the inverse of the vector is pushed and page_fault() sets regs->orig_ax to -1, overwriting the hardware provided error code. xen_hypervisor_callback() was incorrectly pushing 0 for orig_ax instead of -1. Classic Xen kernels pushed %eax which works as %eax cannot be both non-negative and -RESTARTSYS (etc.), but using -1 is consistent with other non-system call entry points and avoids some of the tests in handle_signal(). There were similar bugs in xen_failsafe_callback() of both 32 and 64-bit guests. If the fault was corrected and the normal return path was used then 0 was incorrectly pushed as the value for orig_ax. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Acked-by:
Jan Beulich <JBeulich@suse.com> Acked-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Jacob Shin authored
commit 1bbbbe77 upstream. On systems with very large memory (1 TB in our case), BIOS may report a reserved region or a hole in the E820 map, even above the 4 GB range. Exclude these from the direct mapping. [ hpa: this should be done not just for > 4 GB but for everything above the legacy region (1 MB), at the very least. That, however, turns out to require significant restructuring. That work is well underway, but is not suitable for rc/stable. ] Signed-off-by:
Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1319145326-13902-1-git-send-email-jacob.shin@amd.comSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Kees Cook authored
commit 31fd84b9 upstream. The min/max call needed to have explicit types on some architectures (e.g. mn10300). Use clamp_t instead to avoid the warning: kernel/sys.c: In function 'override_release': kernel/sys.c:1287:10: warning: comparison of distinct pointer types lacks a cast [enabled by default] Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Kees Cook authored
commit 2702b152 upstream. Calling uname() with the UNAME26 personality set allows a leak of kernel stack contents. This fixes it by defensively calculating the length of copy_to_user() call, making the len argument unsigned, and initializing the stack buffer to zero (now technically unneeded, but hey, overkill). CVE-2012-0957 Reported-by:
PaX Team <pageexec@freemail.hu> Signed-off-by:
-
Arnd Bergmann authored
commit fdc858a4 upstream. The sharpsl_pcmcia_ops structure gets passed into sa11xx_drv_pcmcia_probe, where it gets accessed at run-time, unlike all other pcmcia drivers that pass their structures into platform_device_add_data, which makes a copy. This means the gcc warning is valid and the structure must not be marked as __initdata. Without this patch, building collie_defconfig results in: drivers/pcmcia/pxa2xx_sharpsl.c:22:31: fatal error: mach-pxa/hardware.h: No such file or directory compilation terminated. make[3]: *** [drivers/pcmcia/pxa2xx_sharpsl.o] Error 1 make[2]: *** [drivers/pcmcia] Error 2 make[1]: *** [drivers] Error 2 make: *** [sub-make] Error 2 Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Pavel Machek <pavel@suse.cz> Cc: linux-pcmcia@lists.infradead.org Cc: Jochen Friedrich <jochen@scram.de> Signed-off-by:
-
Trond Myklebust authored
commit f39c1bfb and commit 84e28a30 upstream. Commit 43cedbf0 (SUNRPC: Ensure that we grab the XPRT_LOCK before calling xprt_alloc_slot) is causing hangs in the case of NFS over UDP mounts. Since neither the UDP or the RDMA transport mechanism use dynamic slot allocation, we can skip grabbing the socket lock for those transports. Add a new rpc_xprt_op to allow switching between the TCP and UDP/RDMA case. Note that the NFSv4.1 back channel assigns the slot directly through rpc_run_bc_task, so we can ignore that case. Reported-by:
Dick Streefland <dick.streefland@altium.nl> Signed-off-by:
Bryan Schumaker <bjschuma@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Sasha Levin authored
commit 212ba906 upstream. The buffer size in read_flush() is too small for the longest possible values for it. This can lead to a kernel stack corruption: [ 43.047329] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff833e64b4 [ 43.047329] [ 43.049030] Pid: 6015, comm: trinity-child18 Tainted: G W 3.5.0-rc7-next-20120716-sasha #221 [ 43.050038] Call Trace: [ 43.050435] [<ffffffff836c60c2>] panic+0xcd/0x1f4 [ 43.050931] [<ffffffff833e64b4>] ? read_flush.isra.7+0xe4/0x100 [ 43.051602] [<ffffffff810e94e6>] __stack_chk_fail+0x16/0x20 [ 43.052206] [<ffffffff833e64b4>] read_flush.isra.7+0xe4/0x100 [ 43.052951] [<ffffffff833e6500>] ? read_flush_pipefs+0x30/0x30 [ 43.053594] [<ffffffff833e652c>] read_flush_procfs+0x2c/0x30 [ 43.053596] [<ffffffff812b9a8c>] proc_reg_read+0x9c/0xd0 [ 43.053596] [<ffffffff812b99f0>] ? proc_reg_write+0xd0/0xd0 [ 43.053596] [<ffffffff81250d5b>] do_loop_readv_writev+0x4b/0x90 [ 43.053596] [<ffffffff81250fd6>] do_readv_writev+0xf6/0x1d0 [ 43.053596] [<ffffffff812510ee>] vfs_readv+0x3e/0x60 [ 43.053596] [<ffffffff812511b8>] sys_readv+0x48/0xb0 [ 43.053596] [<ffffffff8378167d>] system_call_fastpath+0x1a/0x1f Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Heiko Carstens authored
commit c985cb37 upstream. Because of a change in the s390 arch backend of binutils (commit 23ecd77 "Pick the default arch depending on the target size" in binutils repo) 31 bit builds will fail since the linker would now try to create 64 bit binary output. Fix this by setting OUTPUT_ARCH to s390:31-bit instead of s390. Thanks to Andreas Krebbel for figuring out the issue. Fixes this build error: LD init/built-in.o s390x-4.7.2-ld: s390:31-bit architecture of input file `arch/s390/kernel/head.o' is incompatible with s390:64-bit output Cc: Andreas Krebbel <Andreas.Krebbel@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Dan Carpenter authored
commit 44009105 upstream. The "event" variable is a u16 so the shift will always wrap to zero making the line a no-op. Signed-off-by:
Robert Richter <robert.richter@amd.com> Signed-off-by:
-
Trond Myklebust authored
commit cd0b16c1 upstream. If the filehandle is stale, or open access is denied for some reason, nlm_fopen() may return one of the NLMv4-specific error codes nlm4_stale_fh or nlm4_failed. These get passed right through nlm_lookup_file(), and so when nlmsvc_retrieve_args() calls the latter, it needs to filter the result through the cast_status() machinery. Failure to do so, will trigger the BUG_ON() in encode_nlm_stat... Signed-off-by:
Larry McVoy <lm@bitmover.com> Signed-off-by:
-
Chris Metcalf authored
commit 627072b0 upstream. The tile tool chain uses the .eh_frame information for backtracing. The vmlinux build drops any .eh_frame sections at link time, but when present in kernel modules, it causes a module load failure due to the presence of unsupported pc-relative relocations. When compiling to use compiler feedback support, the compiler by default omits .eh_frame information, so we don't see this problem. But when not using feedback, we need to explicitly suppress the .eh_frame. Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Michal Hocko authored
commit 7386cdbf upstream. Git commit 09a1d34f "nohz: Make idle/iowait counter update conditional" introduced a bug in regard to cpu hotplug. The effect is that the number of idle ticks in the cpu summary line in /proc/stat is still counting ticks for offline cpus. Reproduction is easy, just start a workload that keeps all cpus busy, switch off one or more cpus and then watch the idle field in top. On a dual-core with one cpu 100% busy and one offline cpu you will get something like this: %Cpu(s): 48.7 us, 1.3 sy, 0.0 ni, 50.0 id, 0.0 wa, 0.0 hi, 0.0 si, %0.0 st The problem is that an offline cpu still has ts->idle_active == 1. To fix this we should make sure that the cpu is online when calling get_cpu_idle_time_us and get_cpu_iowait_time_us. [Srivatsa: Rebased to current mainline] Reported-by:
Michal Hocko <mhocko@suse.cz> Reviewed-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Lukas Czerner authored
commit 5de35e8d upstream. Currently if len argument in ext4_trim_fs() is smaller than one block, the 'end' variable underflow. Avoid that by returning EINVAL if len is smaller than file system block. Also remove useless unlikely(). Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
