Pull integrity updates from Mimi Zohar:
 "The main changes are extending the TPM 2.0 PCR banks with bank
  specific file hashes, calculating the "boot_aggregate" based on other
  TPM PCR banks, using the default IMA hash algorithm, instead of SHA1,
  as the basis for the cache hash table key, and preventing the mprotect
  syscall to circumvent an IMA mmap appraise policy rule.

   - In preparation for extending TPM 2.0 PCR banks with bank specific
     digests, commit 0b6cf6b9 ("tpm: pass an array of
     tpm_extend_digest structures to tpm_pcr_extend()") modified
     tpm_pcr_extend(). The original SHA1 file digests were
     padded/truncated, before being extended into the other TPM PCR
     banks. This pull request calculates and extends the TPM PCR banks
     with bank specific file hashes completing the above change.

   - The "boot_aggregate", the first IMA measurement list record, is the
     "trusted boot" link between the pre-boot environment and the
     running OS. With TPM 2.0, the "boot_aggregate" record is not
     limited to being based on the SHA1 TPM PCR bank, but can be
     calculated based on any enabled bank, assuming the hash algorithm
     is also enabled in the kernel.

  Other changes include the following and five other bug fixes/code
  clean up:

   - supporting both a SHA1 and a larger "boot_aggregate" digest in a
     custom template format containing both the the SHA1 ('d') and
     larger digests ('d-ng') fields.

   - Initial hash table key fix, but additional changes would be good"

* tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: Directly free *entry in ima_alloc_init_template() if digests is NULL
  ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()
  ima: Directly assign the ima_default_policy pointer to ima_rules
  ima: verify mprotect change is consistent with mmap policy
  evm: Fix possible memory leak in evm_calc_hmac_or_hash()
  ima: Set again build_ima_appraise variable
  ima: Remove redundant policy rule set in add_rules()
  ima: Fix ima digest hash table key calculation
  ima: Use ima_hash_algo for collision detection in the measurement list
  ima: Calculate and extend PCR with digests in ima_template_entry
  ima: Allocate and initialize tfm for each PCR bank
  ima: Switch to dynamically allocated buffer for template digests
  ima: Store template digest directly in ima_template_entry
  ima: Evaluate error in init_ima()
  ima: Switch to ima_hash_algo for boot aggregate

Pull orangefs updates from Mike Marshall:

 - John Hubbard's conversion from get_user_pages() to pin_user_pages()

 - Colin Ian King's removal of an unneeded variable initialization

* tag 'for-linus-5.8-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: convert get_user_pages() --> pin_user_pages()
  orangefs: remove redundant assignment to variable ret

Pull dlm updates from David Teigland:
 "This set includes a couple minor cleanups, and dropping the
  interruptible from a wait_event that waits for an event from the
  userspace cluster management"

* tag 'dlm-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: remove BUG() before panic()
  dlm: Switch to using wait_event()
  fs:dlm:remove unneeded semicolon in rcom.c
  dlm: user: Replace zero-length array with flexible-array member
  dlm: dlm_internal: Replace zero-length array with flexible-array member

Pull cifs updates from Steve French:
 "22 changesets, 2 for stable.

  Includes big performance improvement for large i/o when using
  multichannel, also includes DFS fixes"

* tag '5.8-rc-smb3-fixes-part-1' of git://git.samba.org/sfrench/cifs-2.6: (22 commits)
  cifs: update internal module version number
  cifs: multichannel: try to rebind when reconnecting a channel
  cifs: multichannel: use pointer for binding channel
  smb3: remove static checker warning
  cifs: multichannel: move channel selection above transport layer
  cifs: multichannel: always zero struct cifs_io_parms
  cifs: dump Security Type info in DebugData
  smb3: fix incorrect number of credits when ioctl MaxOutputResponse > 64K
  smb3: default to minimum of two channels when multichannel specified
  cifs: multichannel: move channel selection in function
  cifs: fix minor typos in comments and log messages
  smb3: minor update to compression header definitions
  cifs: minor fix to two debug messages
  cifs: Standardize logging output
  smb3: Add new parm "nodelete"
  cifs: move some variables off the stack in smb2_ioctl_query_info
  cifs: reduce stack use in smb2_compound_op
  cifs: get rid of unused parameter in reconn_setup_dfs_targets()
  cifs: handle hostnames that resolve to same ip in failover
  cifs: set up next DFS target before generic_ip_connect()
  ...

Pull AFS updates from David Howells:
 "There's some core VFS changes which affect a couple of filesystems:

   - Make the inode hash table RCU safe and providing some RCU-safe
     accessor functions. The search can then be done without taking the
     inode_hash_lock. Care must be taken because the object may be being
     deleted and no wait is made.

   - Allow iunique() to avoid taking the inode_hash_lock.

   - Allow AFS's callback processing to avoid taking the inode_hash_lock
     when using the inode table to find an inode to notify.

   - Improve Ext4's time updating. Konstantin Khlebnikov said "For now,
     I've plugged this issue with try-lock in ext4 lazy time update.
     This solution is much better."

  Then there's a set of changes to make a number of improvements to the
  AFS driver:

   - Improve callback (ie. third party change notification) processing
     by:

      (a) Relying more on the fact we're doing this under RCU and by
          using fewer locks. This makes use of the RCU-based inode
          searching outlined above.

      (b) Moving to keeping volumes in a tree indexed by volume ID
          rather than a flat list.

      (c) Making the server and volume records logically part of the
          cell. This means that a server record now points directly at
          the cell and the tree of volumes is there. This removes an N:M
          mapping table, simplifying things.

   - Improve keeping NAT or firewall channels open for the server
     callbacks to reach the client by actively polling the fileserver on
     a timed basis, instead of only doing it when we have an operation
     to process.

   - Improving detection of delayed or lost callbacks by including the
     parent directory in the list of file IDs to be queried when doing a
     bulk status fetch from lookup. We can then check to see if our copy
     of the directory has changed under us without us getting notified.

   - Determine aliasing of cells (such as a cell that is pointed to be a
     DNS alias). This allows us to avoid having ambiguity due to
     apparently different cells using the same volume and file servers.

   - Improve the fileserver rotation to do more probing when it detects
     that all of the addresses to a server are listed as non-responsive.
     It's possible that an address that previously stopped responding
     has become responsive again.

  Beyond that, lay some foundations for making some calls asynchronous:

   - Turn the fileserver cursor struct into a general operation struct
     and hang the parameters off of that rather than keeping them in
     local variables and hang results off of that rather than the call
     struct.

   - Implement some general operation handling code and simplify the
     callers of operations that affect a volume or a volume component
     (such as a file). Most of the operation is now done by core code.

   - Operations are supplied with a table of operations to issue
     different variants of RPCs and to manage the completion, where all
     the required data is held in the operation object, thereby allowing
     these to be called from a workqueue.

   - Put the standard "if (begin), while(select), call op, end" sequence
     into a canned function that just emulates the current behaviour for
     now.

  There are also some fixes interspersed:

   - Don't let the EACCES from ICMP6 mapping reach the user as such,
     since it's confusing as to whether it's a filesystem error. Convert
     it to EHOSTUNREACH.

   - Don't use the epoch value acquired through probing a server. If we
     have two servers with the same UUID but in different cells, it's
     hard to draw conclusions from them having different epoch values.

   - Don't interpret the argument to the CB.ProbeUuid RPC as a
     fileserver UUID and look up a fileserver from it.

   - Deal with servers in different cells having the same UUIDs. In the
     event that a CB.InitCallBackState3 RPC is received, we have to
     break the callback promises for every server record matching that
     UUID.

   - Don't let afs_statfs return values that go below 0.

   - Don't use running fileserver probe state to make server selection
     and address selection decisions on. Only make decisions on final
     state as the running state is cleared at the start of probing"

Acked-by: Al Viro <viro@zeniv.linux.org.uk> (fs/inode.c part)

* tag 'afs-next-20200604' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (27 commits)
  afs: Adjust the fileserver rotation algorithm to reprobe/retry more quickly
  afs: Show more a bit more server state in /proc/net/afs/servers
  afs: Don't use probe running state to make decisions outside probe code
  afs: Fix afs_statfs() to not let the values go below zero
  afs: Fix the by-UUID server tree to allow servers with the same UUID
  afs: Reorganise volume and server trees to be rooted on the cell
  afs: Add a tracepoint to track the lifetime of the afs_volume struct
  afs: Detect cell aliases 3 - YFS Cells with a canonical cell name op
  afs: Detect cell aliases 2 - Cells with no root volumes
  afs: Detect cell aliases 1 - Cells with root volumes
  afs: Implement client support for the YFSVL.GetCellName RPC op
  afs: Retain more of the VLDB record for alias detection
  afs: Fix handling of CB.ProbeUuid cache manager op
  afs: Don't get epoch from a server because it may be ambiguous
  afs: Build an abstraction around an "operation" concept
  afs: Rename struct afs_fs_cursor to afs_operation
  afs: Remove the error argument from afs_protocol_error()
  afs: Set error flag rather than return error from file status decode
  afs: Make callback processing more efficient.
  afs: Show more information in /proc/net/afs/servers
  ...

Pull ext4 updates from Ted Ts'o:
 "A lot of bug fixes and cleanups for ext4, including:

   - Fix performance problems found in dioread_nolock now that it is the
     default, caused by transaction leaks.

   - Clean up fiemap handling in ext4

   - Clean up and refactor multiple block allocator (mballoc) code

   - Fix a problem with mballoc with a smaller file systems running out
     of blocks because they couldn't properly use blocks that had been
     reserved by inode preallocation.

   - Fixed a race in ext4_sync_parent() versus rename()

   - Simplify the error handling in the extent manipulation code

   - Make sure all metadata I/O errors are felected to
     ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers.

   - Avoid passing an error pointer to brelse in ext4_xattr_set()

   - Fix race which could result to freeing an inode on the dirty last
     in data=journal mode.

   - Fix refcount handling if ext4_iget() fails

   - Fix a crash in generic/019 caused by a corrupted extent node"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
  ext4: avoid unnecessary transaction starts during writeback
  ext4: don't block for O_DIRECT if IOCB_NOWAIT is set
  ext4: remove the access_ok() check in ext4_ioctl_get_es_cache
  fs: remove the access_ok() check in ioctl_fiemap
  fs: handle FIEMAP_FLAG_SYNC in fiemap_prep
  fs: move fiemap range validation into the file systems instances
  iomap: fix the iomap_fiemap prototype
  fs: move the fiemap definitions out of fs.h
  fs: mark __generic_block_fiemap static
  ext4: remove the call to fiemap_check_flags in ext4_fiemap
  ext4: split _ext4_fiemap
  ext4: fix fiemap size checks for bitmap files
  ext4: fix EXT4_MAX_LOGICAL_BLOCK macro
  add comment for ext4_dir_entry_2 file_type member
  jbd2: avoid leaking transaction credits when unreserving handle
  ext4: drop ext4_journal_free_reserved()
  ext4: mballoc: use lock for checking free blocks while retrying
  ext4: mballoc: refactor ext4_mb_good_group()
  ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling
  ext4: mballoc: refactor ext4_mb_discard_preallocations()
  ...

Merge tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - The largest change for this cycle is the DM zoned target's metadata
   version 2 feature that adds support for pairing regular block devices
   with a zoned device to ease the performance impact associated with
   finite random zones of zoned device.

   The changes came in three batches: the first prepared for and then
   added the ability to pair a single regular block device, the second
   was a batch of fixes to improve zoned's reclaim heuristic, and the
   third removed the limitation of only adding a single additional
   regular block device to allow many devices.

   Testing has shown linear scaling as more devices are added.

 - Add new emulated block size (ebs) target that emulates a smaller
   logical_block_size than a block device supports

   The primary use-case is to emulate "512e" devices that have 512 byte
   logical_block_size and 4KB physical_block_size. This is useful to
   some legacy applications that otherwise wouldn't be able to be used
   on 4K devices because they depend on issuing IO in 512 byte
   granularity.

 - Add discard interfaces to DM bufio. First consumer of the interface
   is the dm-ebs target that makes heavy use of dm-bufio.

 - Fix DM crypt's block queue_limits stacking to not truncate
   logic_block_size.

 - Add Documentation for DM integrity's status line.

 - Switch DMDEBUG from a compile time config option to instead use
   dynamic debug via pr_debug.

 - Fix DM multipath target's hueristic for how it manages
   "queue_if_no_path" state internally.

   DM multipath now avoids disabling "queue_if_no_path" unless it is
   actually needed (e.g. in response to configure timeout or explicit
   "fail_if_no_path" message).

   This fixes reports of spurious -EIO being reported back to userspace
   application during fault tolerance testing with an NVMe backend.
   Added various dynamic DMDEBUG messages to assist with debugging
   queue_if_no_path in the future.

 - Add a new DM multipath "Historical Service Time" Path Selector.

 - Fix DM multipath's dm_blk_ioctl() to switch paths on IO error.

 - Improve DM writecache target performance by using explicit cache
   flushing for target's single-threaded usecase and a small cleanup to
   remove unnecessary test in persistent_memory_claim.

 - Other small cleanups in DM core, dm-persistent-data, and DM
   integrity.

* tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (62 commits)
  dm crypt: avoid truncating the logical block size
  dm mpath: add DM device name to Failing/Reinstating path log messages
  dm mpath: enhance queue_if_no_path debugging
  dm mpath: restrict queue_if_no_path state machine
  dm mpath: simplify __must_push_back
  dm zoned: check superblock location
  dm zoned: prefer full zones for reclaim
  dm zoned: select reclaim zone based on device index
  dm zoned: allocate zone by device index
  dm zoned: support arbitrary number of devices
  dm zoned: move random and sequential zones into struct dmz_dev
  dm zoned: per-device reclaim
  dm zoned: add metadata pointer to struct dmz_dev
  dm zoned: add device pointer to struct dm_zone
  dm zoned: allocate temporary superblock for tertiary devices
  dm zoned: convert to xarray
  dm zoned: add a 'reserved' zone flag
  dm zoned: improve logging messages for reclaim
  dm zoned: avoid unnecessary device recalulation for secondary superblock
  dm zoned: add debugging message for reading superblocks
  ...

Pull SCSI updates from James Bottomley:
 :This series consists of the usual driver updates (qla2xxx, ufs, zfcp,
  target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host
  of other minor updates.

  There are no major core changes in this series apart from a
  refactoring in scsi_lib.c"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
  scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes
  scsi: cxgb3i: Fix some leaks in init_act_open()
  scsi: ibmvscsi: Make some functions static
  scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim
  scsi: ufs: Fix WriteBooster flush during runtime suspend
  scsi: ufs: Fix index of attributes query for WriteBooster feature
  scsi: ufs: Allow WriteBooster on UFS 2.2 devices
  scsi: ufs: Remove unnecessary memset for dev_info
  scsi: ufs-qcom: Fix scheduling while atomic issue
  scsi: mpt3sas: Fix reply queue count in non RDPQ mode
  scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event
  scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()
  scsi: vhost: Notify TCM about the maximum sg entries supported per command
  scsi: qla2xxx: Remove return value from qla_nvme_ls()
  scsi: qla2xxx: Remove an unused function
  scsi: iscsi: Register sysfs for iscsi workqueue
  scsi: scsi_debug: Parser tables and code interaction
  scsi: core: Refactor scsi_mq_setup_tags function
  scsi: core: Fix incorrect usage of shost_for_each_device
  scsi: qla2xxx: Fix endianness annotations in source files
  ...

Pull rdma updates from Jason Gunthorpe:
 "A more active cycle than most of the recent past, with a few large,
  long discussed works this time.

  The RNBD block driver has been posted for nearly two years now, and
  flowing through RDMA due to it also introducing a new ULP.

  The removal of FMR has been a recurring discussion theme for a long
  time.

  And the usual smattering of features and bug fixes.

  Summary:

   - Various small driver bugs fixes in rxe, mlx5, hfi1, and efa

   - Continuing driver cleanups in bnxt_re, hns

   - Big cleanup of mlx5 QP creation flows

   - More consistent use of src port and flow label when LAG is used and
     a mlx5 implementation

   - Additional set of cleanups for IB CM

   - 'RNBD' network block driver and target. This is a network block
     RDMA device specific to ionos's cloud environment. It brings strong
     multipath and resiliency capabilities.

   - Accelerated IPoIB for HFI1

   - QP/WQ/SRQ ioctl migration for uverbs, and support for multiple
     async fds

   - Support for exchanging the new IBTA defiend ECE data during RDMA CM
     exchanges

   - Removal of the very old and insecure FMR interface from all ULPs
     and drivers. FRWR should be preferred for at least a decade now"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits)
  RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
  RDMA/mlx5: Return ECE DC support
  RDMA/mlx5: Don't rely on FW to set zeros in ECE response
  RDMA/mlx5: Return an error if copy_to_user fails
  IB/hfi1: Use free_netdev() in hfi1_netdev_free()
  RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
  RDMA/core: Move and rename trace_cm_id_create()
  IB/hfi1: Fix hfi1_netdev_rx_init() error handling
  RDMA: Remove 'max_map_per_fmr'
  RDMA: Remove 'max_fmr'
  RDMA/core: Remove FMR device ops
  RDMA/rdmavt: Remove FMR memory registration
  RDMA/mthca: Remove FMR support for memory registration
  RDMA/mlx4: Remove FMR support for memory registration
  RDMA/i40iw: Remove FMR leftovers
  RDMA/bnxt_re: Remove FMR leftovers
  RDMA/mlx5: Remove FMR leftovers
  RDMA/core: Remove FMR pool API
  RDMA/rds: Remove FMR support for memory registration
  RDMA/srp: Remove support for FMR memory registration
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.8 kernel cycle.

  Core changes:

   - A new GPIO aggregator driver has been merged: this can join a few
     select GPIO lines into a new aggregated GPIO chip. This can be used
     for security: a process can be granted access to only these lines,
     for example for industrial control. Another way to use this is to
     reexpose certain select lines to a virtual machine or container.

   - Warn if the gpio-line-names is too long in he DT parser core.

   - GPIO lines can now be looked up by line name in addition to being
     looked up by offset.

  New drivers:

   - A new generic regmap GPIO driver has been merged. Too many regmap
     drivers are starting to look like each other so we need to create
     some common ground and try to move drivers over to using that.

   - The F7188X driver now supports F81865.

  Driver improvements:

   - Large improvements to the PCA953x expander, get multiple lines and
     several cleanups.

   - Large improvements to the DesignWare DWAPB driver, and Sergey Semin
     has volunteered to maintain it.

   - PL061 can now be built as a module, this is part of a bigger effort
     to make the ARM platforms more modular"

* tag 'gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
  gpio: pca953x: Drop unneeded ACPI_PTR()
  MAINTAINERS: Add gpio regmap section
  gpio: add a reusable generic gpio_chip using regmap
  gpiolib: Introduce gpiochip_irqchip_add_domain()
  gpio: gpiolib: Allow GPIO IRQs to lazy disable
  gpiolib: Separate GPIO_GET_LINEINFO_WATCH_IOCTL conditional
  gpio: rcar: Fix runtime PM imbalance on error
  gpio: pca935x: Allow IRQ support for driver built as a module
  gpio: pxa: Add COMPILE_TEST support
  dt-bindings: gpio: Add renesas,em-gio bindings
  MAINTAINERS: Fix file name for DesignWare GPIO DT schema
  gpio: dwapb: Remove unneeded has_irq member in struct dwapb_port_property
  gpio: dwapb: Don't use IRQ 0 as valid Linux interrupt
  gpio: dwapb: avoid error message for optional IRQ
  gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registration
  gpio: max730x: bring gpiochip_add_data after port config
  MAINTAINERS: Add GPIO Aggregator section
  docs: gpio: Add GPIO Aggregator documentation
  gpio: Add GPIO Aggregator
  gpiolib: Add support for GPIO lookup by line name
  ...

Pull IPMI updates from Corey Minyard:
 "A few small fixes for things, nothing earth shattering"

* tag 'for-linus-5.8-1' of git://github.com/cminyard/linux-ipmi:
  ipmi:ssif: Remove dynamic platform device handing
  Try to load acpi_ipmi when an SSIF ACPI IPMI interface is added
  ipmi_si: Load acpi_ipmi when ACPI IPMI interface added
  ipmi:bt-bmc: Fix error handling and status check
  ipmi: Replace guid_copy() with import_guid() where it makes sense
  ipmi: use vzalloc instead of kmalloc for user creation
  ipmi:bt-bmc: Fix some format issue of the code
  ipmi:bt-bmc: Avoid unnecessary check

Pull VFIO updates from Alex Williamson:

 - Block accesses to disabled MMIO space (Alex Williamson)

 - VFIO device migration API (Kirti Wankhede)

 - type1 IOMMU dirty bitmap API and implementation (Kirti Wankhede)

 - PCI NULL capability masking (Alex Williamson)

 - Memory leak fixes (Qian Cai)

 - Reference leak fix (Qiushi Wu)

* tag 'vfio-v5.8-rc1' of git://github.com/awilliam/linux-vfio:
  vfio iommu: typecast corrections
  vfio iommu: Use shift operation for 64-bit integer division
  vfio/mdev: Fix reference count leak in add_mdev_supported_type
  vfio: Selective dirty page tracking if IOMMU backed device pins pages
  vfio iommu: Add migration capability to report supported features
  vfio iommu: Update UNMAP_DMA ioctl to get dirty bitmap before unmap
  vfio iommu: Implementation of ioctl for dirty pages tracking
  vfio iommu: Add ioctl definition for dirty pages tracking
  vfio iommu: Cache pgsize_bitmap in struct vfio_iommu
  vfio iommu: Remove atomicity of ref_count of pinned pages
  vfio: UAPI for migration interface for device state
  vfio/pci: fix memory leaks of eventfd ctx
  vfio/pci: fix memory leaks in alloc_perm_bits()
  vfio-pci: Mask cap zero
  vfio-pci: Invalidate mmaps and block MMIO access on disabled memory
  vfio-pci: Fault mmaps to enable vma tracking
  vfio/type1: Support faulting PFNMAP vmas

Pull READ_IMPLIES_EXEC changes from Borislav Petkov:
 "Split the old READ_IMPLIES_EXEC workaround from executable
  PT_GNU_STACK now that toolchains long support PT_GNU_STACK marking and
  there's no need anymore to force modern programs into having all its
  user mappings executable instead of only the stack and the PROT_EXEC
  ones.

  Disable that automatic READ_IMPLIES_EXEC forcing on x86-64 and
  arm64.

  Add tables documenting how READ_IMPLIES_EXEC is handled on x86-64, arm
  and arm64.

  By Kees Cook"

* tag 'core_core_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64/elf: Disable automatic READ_IMPLIES_EXEC for 64-bit address spaces
  arm32/64/elf: Split READ_IMPLIES_EXEC from executable PT_GNU_STACK
  arm32/64/elf: Add tables to document READ_IMPLIES_EXEC
  x86/elf: Disable automatic READ_IMPLIES_EXEC on 64-bit
  x86/elf: Split READ_IMPLIES_EXEC from executable PT_GNU_STACK
  x86/elf: Add table to document READ_IMPLIES_EXEC

Pull powerpc updates from Michael Ellerman:

 - Support for userspace to send requests directly to the on-chip GZIP
   accelerator on Power9.

 - Rework of our lockless page table walking (__find_linux_pte()) to
   make it safe against parallel page table manipulations without
   relying on an IPI for serialisation.

 - A series of fixes & enhancements to make our machine check handling
   more robust.

 - Lots of plumbing to add support for "prefixed" (64-bit) instructions
   on Power10.

 - Support for using huge pages for the linear mapping on 8xx (32-bit).

 - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
   driver.

 - Removal of some obsolete 40x platforms and associated cruft.

 - Initial support for booting on Power10.

 - Lots of other small features, cleanups & fixes.

Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.

* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
  powerpc/pseries: Make vio and ibmebus initcalls pseries specific
  cxl: Remove dead Kconfig options
  powerpc: Add POWER10 architected mode
  powerpc/dt_cpu_ftrs: Add MMA feature
  powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
  powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
  powerpc: Add support for ISA v3.1
  powerpc: Add new HWCAP bits
  powerpc/64s: Don't set FSCR bits in INIT_THREAD
  powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
  powerpc/64s: Don't let DT CPU features set FSCR_DSCR
  powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
  powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
  powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
  powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
  powerpc/module_64: Consolidate ftrace code
  powerpc/32: Disable KASAN with pages bigger than 16k
  powerpc/uaccess: Don't set KUEP by default on book3s/32
  powerpc/uaccess: Don't set KUAP by default on book3s/32
  powerpc/8xx: Reduce time spent in allow_user_access() and friends
  ...

Pull module updates from Jessica Yu:

 - Harden CONFIG_STRICT_MODULE_RWX by rejecting any module that has
   SHF_WRITE|SHF_EXECINSTR sections

 - Remove and clean up nested #ifdefs, as it makes code hard to read

* tag 'modules-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Harden STRICT_MODULE_RWX
  module: break nested ARCH_HAS_STRICT_MODULE_RWX and STRICT_MODULE_RWX #ifdefs

queue_limits::logical_block_size got changed from unsigned short to
unsigned int, but it was forgotten to update crypt_io_hints() to use the
new type.  Fix it.

Fixes: ad6bf88a ("block: fix an integer overflow in logical block size")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

When there are many DM multipath devices it really helps to have
additional context for which DM device a failed or reinstated path is
part of.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Add more DMDEBUG that shows arguments passed and caller, and another
that shows state of related flags at end of queue_if_no_path().

Also add queue_if_no_path DMDEBUG to multipath_resume().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Do not allow saving disabled queue_if_no_path if already saved as
enabled; implies multiple suspends (which shouldn't ever happen).  Log
if this unlikely scenario is ever triggered.

Also, only write MPATHF_SAVED_QUEUE_IF_NO_PATH during presuspend or if
"fail_if_no_path" message.  MPATHF_SAVED_QUEUE_IF_NO_PATH is no longer
always modified, e.g.: even if queue_if_no_path()'s save_old_value
argument wasn't set.  This just implies a bit tighter control over
the management of MPATHF_SAVED_QUEUE_IF_NO_PATH.  Side-effect is
multipath_resume() doesn't reset MPATHF_QUEUE_IF_NO_PATH unless
MPATHF_SAVED_QUEUE_IF_NO_PATH was set (during presuspend); and at that
time the MPATHF_SAVED_QUEUE_IF_NO_PATH bit gets cleared.  So
MPATHF_SAVED_QUEUE_IF_NO_PATH's use is much more narrow in scope.

Last, but not least, do _not_ disable queue_if_no_path during noflush
suspend.  There is no need/benefit to saving off queue_if_no_path via
MPATHF_SAVED_QUEUE_IF_NO_PATH and clearing MPATHF_QUEUE_IF_NO_PATH for
noflush suspend -- by avoiding this needless queue_if_no_path flag
churn there is less potential for MPATHF_QUEUE_IF_NO_PATH to get lost.
Which avoids potential for IOs to be errored back up to userspace
during DM multipath's handling of path failures.

That said, this last change papers over a reported issue concerning
request-based dm-multipath's interaction with blk-mq, relative to
suspend and resume: multipath_endio is being called _before_
multipath_resume.  This should never happen if DM suspend's
blk_mq_quiesce_queue() + dm_wait_for_completion() is genuinely waiting
for all inflight blk-mq requests to complete.  Similarly:
drivers/md/dm.c:__dm_resume() clearly calls dm_table_resume_targets()
_before_ dm_start_queue()'s blk_mq_unquiesce_queue() is called.  If
the queue isn't even restarted until after multipath_resume(); the BIG
question that still needs answering is: how can multipath_end_io beat
multipath_resume in a race!?
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Remove micro-optimization that infers device is between presuspend and
resume (was done purely to avoid call to dm_noflush_suspending, which
isn't expensive anyway).

Remove flags argument since they are no longer checked.

And remove must_push_back_bio() since it was simply a call to
__must_push_back().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

When specifying several devices the superblock location must be
checked to ensure the devices are specified in the correct order.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Prefer full zones when selecting the next zone for reclaim.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

per-device reclaim should select zones on that device only.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

When allocating a zone, pass in an indicator on which device the zone
should be allocated; this increases performance for a multi-device
setup because reclaim will now allocate zones on the device for which
reclaim is running.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Remove the hard-coded limit of two devices and support an unlimited
number of additional zoned devices.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Random and sequential zones should be part of the respective
device structure to make arbitration between devices possible.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Instead of having one reclaim workqueue for the entire set we should
be allocating a reclaim workqueue per device; doing so will reduce
contention and should boost performance for a multi-device setup.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Add a metadata pointer within struct dmz_dev and use it as argument
for blkdev_report_zones() instead of the metadata itself.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Add a pointer, to the containing device, within struct dm_zone and
kill dmz_zone_to_dev().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Checking the tertiary superblock just consists of validating UUIDs,
crcs, and the generation number; it doesn't have contents which would
be required during the actual operation.

So allocate a temporary superblock when checking tertiary devices to
avoid having to store it together with the 'real' superblocks.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The zones array is getting really large, and large arrays tend to
wreak havoc with the CPU caches.  So convert it to xarray to become
more cache friendly.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # fix leak in dmz_insert
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Instead of counting the number of reserved zones in dmz_free_zone(),
mark the zone as 'reserved' during allocation and simplify
dmz_free_zone().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Instead of just reporting the errno, add some more verbose debugging
message in the reclaim path.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The secondary superblock must reside on the same device as the primary
superblock, so there is no need to re-calculate the device.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Use dm_bufio_forget_buffers instead of a block-by-block loop that
calls dm_bufio_forget. dm_bufio_forget_buffers is faster than the loop
because it searches for used buffers using rb-tree.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Introduce a function forget_buffer_locked that forgets a range of
buffers. It is more efficient than calling forget_buffer in a loop.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm-bufio uses unnatural ordering in the rb-tree - blocks with smaller
numbers were put to the right node and blocks with bigger numbers were
put to the left node.

Reverse that logic so that it's natural.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pull x86 mm updates from Ingo Molnar:
 "Misc changes:

   - Unexport various PAT primitives

   - Unexport per-CPU tlbstate and uninline TLB helpers"

* tag 'x86-mm-2020-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/tlb/uv: Add a forward declaration for struct flush_tlb_info
  x86/cpu: Export native_write_cr4() only when CONFIG_LKTDM=m
  x86/tlb: Restrict access to tlbstate
  xen/privcmd: Remove unneeded asm/tlb.h include
  x86/tlb: Move PCID helpers where they are used
  x86/tlb: Uninline nmi_uaccess_okay()
  x86/tlb: Move cr4_set_bits_and_update_boot() to the usage site
  x86/tlb: Move paravirt_tlb_remove_table() to the usage site
  x86/tlb: Move __flush_tlb_all() out of line
  x86/tlb: Move flush_tlb_others() out of line
  x86/tlb: Move __flush_tlb_one_kernel() out of line
  x86/tlb: Move __flush_tlb_one_user() out of line
  x86/tlb: Move __flush_tlb_global() out of line
  x86/tlb: Move __flush_tlb() out of line
  x86/alternatives: Move temporary_mm helpers into C
  x86/cr4: Sanitize CR4.PCE update
  x86/cpu: Uninline CR4 accessors
  x86/tlb: Uninline __get_current_cr3_fast()
  x86/mm: Use pgprotval_t in protval_4k_2_large() and protval_large_2_4k()
  x86/mm: Unexport __cachemode2pte_tbl
  ...