- 29 Sep, 2020 6 commits
-
-
Alex Deucher authored
The state array is in the reverse order compared to other asics (high to low rather than low to high). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1313Reviewed-by:
Prike Liang <Prike.Liang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Jean Delvare authored
A recent attempt to fix a ref count leak in amdgpu_display_crtc_set_config() turned out to be doing too much and "fixed" an intended decrease as if it were a leak. Undo that part to restore the proper balance. This is the very nature of this function to increase or decrease the power reference count depending on the situation. Consequences of this bug is that the power reference would eventually get down to 0 while the display was still in use, resulting in that display switching off unexpectedly. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Fixes: e008fa6f ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config") Cc: stable@vger.kernel.org Cc: Navid Emamdoost <navid.emamdoost@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
Properly handle clang and older versions of gcc. Fixes: e77165bf ("drm/amd/display: Add DCN3 blocks to Makefile") Acked-by:
Nirmoy Das <nirmoy.das@amd.com> Signed-off-by:
-
Flora Cui authored
max_caps might be 0, thus hdcp_work might be ZERO_SIZE_PTR Signed-off-by:
Flora Cui <flora.cui@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
Jiansong Chen authored
Remove gpu_info fw support for sienna_cichlid etc., since the information can be retrieved from discovery binary. Signed-off-by:
Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by:
Likun Gao <Likun.Gao@amd.com> Signed-off-by:
-
Sudheesh Mavila authored
SMU10_UMD_PSTATE_PEAK_FCLK value should not be used to set the DPM. Suggested-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by:
-
- 18 Sep, 2020 6 commits
-
-
Alex Deucher authored
Navi12 has worked fine for a while now. Reviewed-by:
-
Likun Gao authored
Add device ID for sienna_cichlid. v2: squash in additional device ids. Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Alex Deucher authored
Switch from magic numbers to defines for AV1 clockgating. Reviewed-by:
-
Alex Deucher authored
This adds the AV1 registers. Reviewed-by:
-
Alex Deucher authored
Add the VRS registers. Reviewed-by:
-
Philip Yang authored
Set ttm->sg to NULL after kfree, to avoid memory corruption backtrace: [ 420.932812] kernel BUG at /build/linux-do9eLF/linux-4.15.0/mm/slub.c:295! [ 420.934182] invalid opcode: 0000 [#1] SMP NOPTI [ 420.935445] Modules linked in: xt_conntrack ipt_MASQUERADE [ 420.951332] Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 1.5.4 07/09/2020 [ 420.952887] RIP: 0010:__slab_free+0x180/0x2d0 [ 420.954419] RSP: 0018:ffffbe426291fa60 EFLAGS: 00010246 [ 420.955963] RAX: ffff9e29263e9c30 RBX: ffff9e29263e9c30 RCX: 000000018100004b [ 420.957512] RDX: ffff9e29263e9c30 RSI: fffff3d33e98fa40 RDI: ffff9e297e407a80 [ 420.959055] RBP: ffffbe426291fb00 R08: 0000000000000001 R09: ffffffffc0d39ade [ 420.960587] R10: ffffbe426291fb20 R11: ffff9e49ffdd4000 R12: ffff9e297e407a80 [ 420.962105] R13: fffff3d33e98fa40 R14: ffff9e29263e9c30 R15: ffff9e2954464fd8 [ 420.963611] FS: 00007fa2ea097780(0000) GS:ffff9e297e840000(0000) knlGS:0000000000000000 [ 420.965144] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 420.966663] CR2: 00007f16bfffefb8 CR3: 0000001ff0c62000 CR4: 0000000000340ee0 [ 420.968193] Call Trace: [ 420.969703] ? __page_cache_release+0x3c/0x220 [ 420.971294] ? amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.972789] kfree+0x168/0x180 [ 420.974353] ? amdgpu_ttm_tt_set_user_pages+0x64/0xc0 [amdgpu] [ 420.975850] ? kfree+0x168/0x180 [ 420.977403] amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.978888] ttm_tt_unpopulate.part.10+0x53/0x60 [amdttm] [ 420.980357] ttm_tt_destroy.part.11+0x4f/0x60 [amdttm] [ 420.981814] ttm_tt_destroy+0x13/0x20 [amdttm] [ 420.983273] ttm_bo_cleanup_memtype_use+0x36/0x80 [amdttm] [ 420.984725] ttm_bo_release+0x1c9/0x360 [amdttm] [ 420.986167] amdttm_bo_put+0x24/0x30 [amdttm] [ 420.987663] amdgpu_bo_unref+0x1e/0x30 [amdgpu] [ 420.989165] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x9ca/0xb10 [amdgpu] [ 420.990666] kfd_ioctl_alloc_memory_of_gpu+0xef/0x2c0 [amdgpu] Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
- 17 Sep, 2020 5 commits
-
-
Dave Airlie authored
Merge tag 'mediatek-drm-fixes-5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.9 1. Fix scrolling of panel 2. Remove duplicated include 3. Use CPU when fail to get cmdq event 4. Add missing put_device() call Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200916231724.30571-1-chunkuang.hu@kernel.org
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2020-09-17' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc6: - Avoid exposing a partially constructed context - Use RCU instead of mutex for context termination list iteration - Avoid data race reported by KCSAN - Filter wake_flags passed to default_wake_function Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.9-2020-09-17' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-09-17: amdgpu: - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes amdkfd: - Fix a GPU reset crash - Fix a memory leak radeon: - Revert a PLL fix that broke other boards Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] DTM topology updates happens by default now. This results in DTM warnings when hdcp is not even being enabled. This spams the dmesg and doesn't effect normal display functionality so it is better to log it using DRM_DEBUG_KMS() [How] Change the DRM_WARN() to DRM_DEBUG_KMS() Signed-off-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Jiansong Chen authored
The firmware provided via MODULE_FIRMWARE appears in the module information. External tools(eg. dracut) may use the list of fw files to include them as appropriate in an initramfs, thus missing declaration will lead to request firmware failure in boot time. Signed-off-by:
Tianci Yin <tianci.yin@amd.com> Signed-off-by:
-
- 16 Sep, 2020 10 commits
-
-
Yu Kuai authored
if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have a corresponding put_device(). Thus add jump target to fix the exception handling for this function implementation. Fixes: 8f83f268 ("drm/mediatek: Add HDMI support") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org>
-
Yu Kuai authored
if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have a corresponding put_device(). Thus add jump target to fix the exception handling for this function implementation. Fixes: 119f5173 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by:
-
Yu Kuai authored
mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it fail, previous successive init component is not proccessed. Thus uninitialize valid component and put their device if component init failed. Fixes: 119f5173 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by:
-
Yu Kuai authored
if of_find_device_by_node() succeed, mtk_ddp_comp_init() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: d0afe37f ("drm/mediatek: support CMDQ interface in ddp component") Signed-off-by:
-
Chun-Kuang Hu authored
Even though cmdq client is created successfully, without the cmdq event, cmdq could not work correctly, so use CPU when fail to get cmdq event. Fixes: 60fa8c13 ("drm/mediatek: Move gce event property to mutex device node") Signed-off-by:
-
Wang Hai authored
Remove mtk_drm_ddp.h which is included more than once Fixes: 9aef5867 ("drm/mediatek: drop use of drmP.h") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Chris Wilson authored
(NOTE: This is the minimal backportable fix, a full fix is being developed at https://patchwork.freedesktop.org/patch/388048/) The flags passed to the wait_entry.func are passed onwards to try_to_wake_up(), which has a very particular interpretation for its wake_flags. In particular, beyond the published WF_SYNC, it has a few internal flags as well. Since we passed the fence->error down the chain via the flags argument, these ended up in the default_wake_function confusing the kernel/sched. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2110 Fixes: ef468849 ("drm/i915: Propagate fence errors") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728152144.1100-1-chris@chris-wilson.co.ukSigned-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> [Joonas: Rebased and reordered into drm-intel-gt-next branch] [Joonas: Added a note and link about more complete fix] Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit f4b3c395) Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Chris Wilson authored
To implement preempt-to-busy (and so efficient timeslicing and best utilization of the hardware submission ports) we let the GPU run asynchronously in respect to the ELSP submission queue. This created challenges in keeping and accessing the driver state mirroring the asynchronous GPU execution. The latest occurence of this was spotted by KCSAN: [ 1413.563200] BUG: KCSAN: data-race in __await_execution+0x217/0x370 [i915] [ 1413.563221] [ 1413.563236] race at unknown origin, with read to 0xffff88885bb6c478 of 8 bytes by task 9654 on cpu 1: [ 1413.563548] __await_execution+0x217/0x370 [i915] [ 1413.563891] i915_request_await_dma_fence+0x4eb/0x6a0 [i915] [ 1413.564235] i915_request_await_object+0x421/0x490 [i915] [ 1413.564577] i915_gem_do_execbuffer+0x29b7/0x3c40 [i915] [ 1413.564967] i915_gem_execbuffer2_ioctl+0x22f/0x5c0 [i915] [ 1413.564998] drm_ioctl_kernel+0x156/0x1b0 [ 1413.565022] drm_ioctl+0x2ff/0x480 [ 1413.565046] __x64_sys_ioctl+0x87/0xd0 [ 1413.565069] do_syscall_64+0x4d/0x80 [ 1413.565094] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To complicate matters, we have to both avoid the read tearing of *active and avoid any write tearing as perform the pending[] -> inflight[] promotion of the execlists. This is because we cannot rely on the memcpy doing u64 aligned copies on all kernels/platforms and so we opt to open-code it with explicit WRITE_ONCE annotations to satisfy KCSAN. v2: When in doubt, write the same comment again. v3: Expanded commit message. Fixes: b55230e5 ("drm/i915: Check for awaits on still currently executing requests") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-1-chris@chris-wilson.co.ukSigned-off-by:
-
Chris Wilson authored
As we now protect the timeline list using RCU, we can drop the timeline->mutex for guarding the list iteration during context close, as we are searching for an inflight request. Any new request will see the context is banned and not be submitted. In doing so, pull the checks for a concurrent submission of the request (notably the i915_request_completed()) under the engine spinlock, to fully serialise with __i915_request_submit()). That is in the case of preempt-to-busy where the request may be completed during the __i915_request_submit(), we need to be careful that we sample the request status after serialising so that we don't miss the request the engine is actually submitting. Fixes: 4a317415 ("drm/i915/gem: Refine occupancy test in kill_context()") References: d22d2d07 ("drm/i915: Protect i915_request_await_start from early waits") # rcu protection of timeline->requests References: https://gitlab.freedesktop.org/drm/intel/-/issues/1622 References: https://gitlab.freedesktop.org/drm/intel/-/issues/2158Signed-off-by:
-
Chris Wilson authored
Avoid exposing a partially constructed context by deferring the list_add() from the initial construction to the end of registration. Otherwise, if we peek into the list of contexts from inside debugfs, we may see the partially constructed context and chase down some dangling incomplete pointers. Reported-by:
CQ Tang <cq.tang@intel.com> Fixes: 3aa9945a ("drm/i915: Separate GEM context construction and registration to userspace") References: f6e8aa38 ("drm/i915: Report the number of closed vma held by each context in debugfs") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200730092856.23615-1-chris@chris-wilson.co.ukSigned-off-by:
-
- 15 Sep, 2020 8 commits
-
-
Michel Dänzer authored
Don't check drm_crtc_state::active for this either, per its documentation in include/drm/drm_crtc.h: * Hence drivers must not consult @active in their various * &drm_mode_config_funcs.atomic_check callback to reject an atomic * commit. atomic_remove_fb disables the CRTC as needed for disabling the primary plane. This prevents at least the following problems if the primary plane gets disabled (e.g. due to destroying the FB assigned to the primary plane, as happens e.g. with mutter in Wayland mode): * The legacy cursor ioctl returned EINVAL for a non-0 cursor FB ID (which enables the cursor plane). * If the cursor plane was enabled, changing the legacy DPMS property value from off to on returned EINVAL. v2: * Minor changes to code comment and commit log, per review feedback. GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1108 GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1165 GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1344Suggested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Michel Dänzer <mdaenzer@redhat.com> Signed-off-by:
-
Christian König authored
Turns out this breaks a lot of different hardware. This reverts commit fc8c7052. Signed-off-by:
-
Andrey Grodzovsky authored
Create sysfs interface also for sienna_cichlid. Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
-
Jun Lei authored
[why] Recent characterization shows increased stutter latencies on some SKUs, leading to underflow. [how] Update SOC params to account for this worst case latency. Signed-off-by:
Jun Lei <jun.lei@amd.com> Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] Previously we were only calling add_topology when hdcp was being enabled. Now we call add_topology by default so the ERROR messages are printed if the firmware is not loaded. This error message is not relevant for normal display functionality so no need to print a ERROR message. [How] Change DRM_ERROR to DRM_INFO Signed-off-by:
-
Jiansong Chen authored
This avoids smu issue when enabling runtime pptable update for sienna_cichlid and so on. Runtime pptable udpate is needed for test and debug purpose. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
-
Dennis Li authored
In the resume stage of GPU recovery, start_cpsch will call pm_init which set pm->allocated as false, cause the next pm_release_ib has no chance to release ib memory. Add pm_release_ib in stop_cpsch which will be called in the suspend stage of GPU recovery. Reviewed-by:
Dennis Li <Dennis.Li@amd.com> Signed-off-by:
-
Dennis Li authored
The crash log as the below: [Thu Aug 20 23:18:14 2020] general protection fault: 0000 [#1] SMP NOPTI [Thu Aug 20 23:18:14 2020] CPU: 152 PID: 1837 Comm: kworker/152:1 Tainted: G OE 5.4.0-42-generic #46~18.04.1-Ubuntu [Thu Aug 20 23:18:14 2020] Hardware name: GIGABYTE G482-Z53-YF/MZ52-G40-00, BIOS R12 05/13/2020 [Thu Aug 20 23:18:14 2020] Workqueue: events amdgpu_ras_do_recovery [amdgpu] [Thu Aug 20 23:18:14 2020] RIP: 0010:evict_process_queues_cpsch+0xc9/0x130 [amdgpu] [Thu Aug 20 23:18:14 2020] Code: 49 8d 4d 10 48 39 c8 75 21 eb 44 83 fa 03 74 36 80 78 72 00 74 0c 83 ab 68 01 00 00 01 41 c6 45 41 00 48 8b 00 48 39 c8 74 25 <80> 78 70 00 c6 40 6d 01 74 ee 8b 50 28 c6 40 70 00 83 ab 60 01 00 [Thu Aug 20 23:18:14 2020] RSP: 0018:ffffb29b52f6fc90 EFLAGS: 00010213 [Thu Aug 20 23:18:14 2020] RAX: 1c884edb0a118914 RBX: ffff8a0d45ff3c00 RCX: ffff8a2d83e41038 [Thu Aug 20 23:18:14 2020] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff8a0e2e4178c0 [Thu Aug 20 23:18:14 2020] RBP: ffffb29b52f6fcb0 R08: 0000000000001b64 R09: 0000000000000004 [Thu Aug 20 23:18:14 2020] R10: ffffb29b52f6fb78 R11: 0000000000000001 R12: ffff8a0d45ff3d28 [Thu Aug 20 23:18:14 2020] R13: ffff8a2d83e41028 R14: 0000000000000000 R15: 0000000000000000 [Thu Aug 20 23:18:14 2020] FS: 0000000000000000(0000) GS:ffff8a0e2e400000(0000) knlGS:0000000000000000 [Thu Aug 20 23:18:14 2020] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Thu Aug 20 23:18:14 2020] CR2: 000055c783c0e6a8 CR3: 00000034a1284000 CR4: 0000000000340ee0 [Thu Aug 20 23:18:14 2020] Call Trace: [Thu Aug 20 23:18:14 2020] kfd_process_evict_queues+0x43/0xd0 [amdgpu] [Thu Aug 20 23:18:14 2020] kfd_suspend_all_processes+0x60/0xf0 [amdgpu] [Thu Aug 20 23:18:14 2020] kgd2kfd_suspend.part.7+0x43/0x50 [amdgpu] [Thu Aug 20 23:18:14 2020] kgd2kfd_pre_reset+0x46/0x60 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_amdkfd_pre_reset+0x1a/0x20 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_device_gpu_recover+0x377/0xf90 [amdgpu] [Thu Aug 20 23:18:14 2020] ? amdgpu_ras_error_query+0x1b8/0x2a0 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_ras_do_recovery+0x159/0x190 [amdgpu] [Thu Aug 20 23:18:14 2020] process_one_work+0x20f/0x400 [Thu Aug 20 23:18:14 2020] worker_thread+0x34/0x410 When GPU hang, user process will fail to create a compute queue whose struct object will be freed later, but driver wrongly add this queue to queue list of the proccess. And then kfd_process_evict_queues will access a freed memory, which cause a system crash. v2: The failure to execute_queues should probably not be reported to the caller of create_queue, because the queue was already created. Therefore change to ignore the return value from execute_queues. Reviewed-by:
-
- 13 Sep, 2020 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A collection of fixes I've been accruing over the last few weeks, none of them have been severe enough to warrant flushing the queue but it's been long enough now that it's a good idea to send them in. A handful of them are fixups for QSPI DT/bindings/compatibles, some smaller fixes for system DMA clock control and TMU interrupts on i.MX, a handful of fixes for OMAP, including a fix for DSI (display) on omap5" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits) arm64: dts: ns2: Fixed QSPI compatible string ARM: dts: BCM5301X: Fixed QSPI compatible string ARM: dts: NSP: Fixed QSPI compatible string ARM: dts: bcm: HR2: Fixed QSPI compatible string dt-bindings: spi: Fix spi-bcm-qspi compatible ordering ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3 arm64: dts: imx8mp: correct sdma1 clk setting arm64: dts: imx8mq: Fix TMU interrupt property ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy ARM: dts: vfxxx: Add syscon compatible with OCOTP ARM: dts: imx6q-logicpd: Fix broken PWM arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells ARM: dts: imx7ulp: Correct gpio ranges ARM: dts: ls1021a: fix QuadSPI-memory reg range arm64: defconfig: Enable ptn5150 extcon driver arm64: defconfig: Enable USB gadget with configfs ARM: configs: Update Integrator defconfig ARM: dts: omap5: Fix DSI base address and clocks ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB/Thunderbolt fixes from Greg KH: "Here are some small USB and Thunderbolt driver fixes for 5.9-rc5. Nothing huge, just a number of bugfixes and new device ids for problems reported: - new USB serial driver ids - bug fixes for syzbot reported problems - typec driver fixes - thunderbolt driver fixes - revert of reported broken commit All of these have been in linux-next with no reported issues" * tag 'usb-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes usb: typec: intel_pmc_mux: Do not configure Altmode HPD High usb: core: fix slab-out-of-bounds Read in read_descriptors Revert "usb: dwc3: meson-g12a: fix shared reset control use" usb: typec: ucsi: acpi: Check the _DEP dependencies usb: typec: intel_pmc_mux: Un-register the USB role switch usb: Fix out of sync data toggle if a configured device is reconfigured USB: serial: option: support dynamic Quectel USB compositions USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules thunderbolt: Use maximum USB3 link rate when reclaiming if link is not up thunderbolt: Disable ports that are not implemented USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver fixes from Greg KH: "Here are a number of staging and IIO driver fixes for 5.9-rc5. The majority of these are IIO driver fixes, to resolve a timestamp issue that was recently found to affect a bunch of IIO drivers. The other fixes in here are: - small IIO driver fixes - greybus driver fix - counter driver fix (came in through the IIO fixes tree) All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits) iio: adc: mcp3422: fix locking on error path iio: adc: mcp3422: fix locking scope iio: adc: meson-saradc: Use the parent device to look up the calib data iio:adc:max1118 Fix alignment of timestamp and data leak issues iio:adc:ina2xx Fix timestamp alignment issue. iio:adc:ti-adc084s021 Fix alignment and data leak issues. iio:adc:ti-adc081c Fix alignment and data leak issues iio:magnetometer:ak8975 Fix alignment and data leak issues. iio:light:ltr501 Fix timestamp alignment issue. iio:light:max44000 Fix timestamp alignment and prevent data leak. iio:chemical:ccs811: Fix timestamp alignment and prevent data leak. iio:proximity:mb1232: Fix timestamp alignment and prevent data leak. iio:accel:mma7455: Fix timestamp alignment and prevent data leak. iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak. iio:accel:mma8452: Fix timestamp alignment and prevent data leak. iio: accel: kxsd9: Fix alignment of local buffer. iio: adc: rockchip_saradc: select IIO_TRIGGERED_BUFFER iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set counter: microchip-tcb-capture: check the correct variable iio: cros_ec: Set Gyroscope default frequency to 25Hz ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are some small driver core and debugfs fixes for 5.9-rc5 Included in here are: - firmware loader memory leak fix - firmware loader testing fixes for non-EFI systems - device link locking fixes found by lockdep - kobject_del() bugfix that has been affecting some callers - debugfs minor fix All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: test_firmware: Test platform fw loading on non-EFI systems PM: <linux/device.h>: fix @em_pd kernel-doc warning kobject: Drop unneeded conditional in __kobject_del() driver core: Fix device_pm_lock() locking for device links MAINTAINERS: Add the security document to SECURITY CONTACT driver code: print symbolic error code debugfs: Fix module state check condition kobject: Restore old behaviour of kobject_del(NULL) firmware_loader: fix memory leak for paged buffer
-
