- 29 Aug, 2019 40 commits
-
-
Naresh Kamboju authored
[ Upstream commit c096397c ] selftests kvm test cases need pre-required kernel configs for the test to get pass. Signed-off-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marc Zyngier authored
[ Upstream commit c69509c7 ] At the moment, the way we reset CP15 registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a CP15 register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the CP15 reg leave outside of the cp15_regs[] array). It may well be axed in the near future. Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 03fdfb26 ] At the moment, the way we reset system registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a system register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. This requires fixing a couple of sysreg refinition in the trap table. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the sysregs leave outside of the sys_regs[] array). It may well be axed in the near future. Tested-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
Jin Yao authored
[ Upstream commit 8e6e5bea ] The events defined in pmu-events JSON are parsed and added into perf tool. For fixed counters, we handle the encodings between JSON and perf by using a static array fixed[]. But the fixed[] has missed an important event "cpu_clk_unhalted.core". For example, on the Tremont platform, [root@localhost ~]# perf stat -e cpu_clk_unhalted.core -a event syntax error: 'cpu_clk_unhalted.core' \___ parser error With this patch, the event cpu_clk_unhalted.core can be parsed. [root@localhost perf]# ./perf stat -e cpu_clk_unhalted.core -a -vvv ------------------------------------------------------------ perf_event_attr: type 4 size 112 config 0x3c sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ ... Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190729072755.2166-1-yao.jin@linux.intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
He Zhe authored
[ Upstream commit 5f5e25f1 ] cpu_map__snprint_mask() would write to illegal memory pointed by zalloc(0) when there is only one cpu. This patch fixes the calculation and adds sanity check against the input parameters. Signed-off-by:
He Zhe <zhe.he@windriver.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Fixes: 4400ac8a ("perf cpumap: Introduce cpu_map__snprint_mask()") Link: http://lkml.kernel.org/r/1564734592-15624-2-git-send-email-zhe.he@windriver.comSigned-off-by:
-
He Zhe authored
[ Upstream commit cf30ae72 ] The buffer containing the string used to set cpumask is overwritten at the end of the string later in cpu_map__snprint_mask due to not enough memory space, when there is only one cpu. And thus causes the following failure: $ perf ftrace ls failed to reset ftrace $ This patch fixes the calculation of the cpumask string size. Signed-off-by:
-
Paolo Valente authored
[ Upstream commit fd03177c ] As reported in [1], the call bfq_init_rq(rq) may return NULL in case of OOM (in particular, if rq->elv.icq is NULL because memory allocation failed in failed in ioc_create_icq()). This commit handles this circumstance. [1] https://lkml.org/lkml/2019/7/22/824 Cc: Hsin-Yi Wang <hsinyi@google.com> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Reported-by:
Guenter Roeck <linux@roeck-us.net> Reported-by:
Hsin-Yi Wang <hsinyi@google.com> Reviewed-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 6b7c3b86 ] Currently when too many retries have occurred there is a memory leak on the allocation for reply on the error return path. Fix this by kfree'ing reply before returning. Addresses-Coverity: ("Resource leak") Fixes: a9cd9c04 ("drm/vmwgfx: Add a check to handle host message failure") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Deepak Rawat <drawat@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Valdis Klētnieks authored
[ Upstream commit 04f5bda8 ] When building with W=1, warnings about missing prototypes are emitted: CC arch/x86/lib/cpu.o arch/x86/lib/cpu.c:5:14: warning: no previous prototype for 'x86_family' [-Wmissing-prototypes] 5 | unsigned int x86_family(unsigned int sig) | ^~~~~~~~~~ arch/x86/lib/cpu.c:18:14: warning: no previous prototype for 'x86_model' [-Wmissing-prototypes] 18 | unsigned int x86_model(unsigned int sig) | ^~~~~~~~~ arch/x86/lib/cpu.c:33:14: warning: no previous prototype for 'x86_stepping' [-Wmissing-prototypes] 33 | unsigned int x86_stepping(unsigned int sig) | ^~~~~~~~~~~~ Add the proper include file so the prototypes are there. Signed-off-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/42513.1565234837@turing-policeSigned-off-by:
-
Jens Axboe authored
[ Upstream commit 752ead44 ] Abort processing of a command if we run out of mapped data in the SG list. This should never happen, but a previous bug caused it to be possible. Play it safe and attempt to abort nicely if we don't have more SG segments left. Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Jens Axboe authored
[ Upstream commit 2d727150 ] For passthrough requests, libata-scsi takes what the user passes in as gospel. This can be problematic if the user fills in the CDB incorrectly. One example of that is in request sizes. For read/write commands, the CDB contains fields describing the transfer length of the request. These should match with the SG_IO header fields, but libata-scsi currently does no validation of that. Check that the number of blocks in the CDB for passthrough requests matches what was mapped into the request. If the CDB asks for more data then the validated SG_IO header fields, error it. Reported-by:
Krishna Ram Prakash R <krp@gtux.in> Reviewed-by:
-
Jiangfeng Xiao authored
[ Upstream commit 96a50c0d ] On the arm64 platform, executing "ifconfig eth0 up" will fail, returning "ifconfig: SIOCSIFFLAGS: Input/output error." ndev->dev is not initialized, dma_map_single->get_dma_ops-> dummy_dma_ops->__dummy_map_page will return DMA_ERROR_CODE directly, so when we use dma_map_single, the first parameter is to use the device of platform_device. Signed-off-by:
Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jiangfeng Xiao authored
[ Upstream commit f2243b82 ] TX_DESC_NUM is 256, in tx_count, the maximum value of mod(TX_DESC_NUM - 1) is 254, the variable "count" in the hip04_mac_start_xmit function is never equal to (TX_DESC_NUM - 1), so hip04_mac_start_xmit never return NETDEV_TX_BUSY. tx_count is modified to mod(TX_DESC_NUM) so that the maximum value of tx_count can reach (TX_DESC_NUM - 1), then hip04_mac_start_xmit can reurn NETDEV_TX_BUSY. Signed-off-by:
-
Jiangfeng Xiao authored
[ Upstream commit 1a2c070a ] If hip04_tx_reclaim is interrupted while it is running and then __napi_schedule continues to execute hip04_rx_poll->hip04_tx_reclaim, reentrancy occurs and oops is generated. So you need to mask the interrupt during the hip04_tx_reclaim run. The kernel oops exception stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = c0003000 [00000050] *pgd=80000000a04003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM Modules linked in: hip04_eth mtdblock mtd_blkdevs mtd ohci_platform ehci_platform ohci_hcd ehci_hcd vfat fat sd_mod usb_storage scsi_mod usbcore usb_common CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.4.185 #1 Hardware name: Hisilicon A15 task: c0a250e0 task.stack: c0a00000 PC is at hip04_tx_reclaim+0xe0/0x17c [hip04_eth] LR is at hip04_tx_reclaim+0x30/0x17c [hip04_eth] pc : [<bf30c3a4>] lr : [<bf30c2f4>] psr: 600e0313 sp : c0a01d88 ip : 00000000 fp : c0601f9c r10: 00000000 r9 : c3482380 r8 : 00000001 r7 : 00000000 r6 : 000000e1 r5 : c3482000 r4 : 0000000c r3 : f2209800 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 32c5387d Table: 03d28c80 DAC: 55555555 Process swapper/0 (pid: 0, stack limit = 0xc0a00190) Stack: (0xc0a01d88 to 0xc0a02000) [<bf30c3a4>] (hip04_tx_reclaim [hip04_eth]) from [<bf30d2e0>] (hip04_rx_poll+0x88/0x368 [hip04_eth]) [<bf30d2e0>] (hip04_rx_poll [hip04_eth]) from [<c04c2d9c>] (net_rx_action+0x114/0x34c) [<c04c2d9c>] (net_rx_action) from [<c021eed8>] (__do_softirq+0x218/0x318) [<c021eed8>] (__do_softirq) from [<c021f284>] (irq_exit+0x88/0xac) [<c021f284>] (irq_exit) from [<c0240090>] (msa_irq_exit+0x11c/0x1d4) [<c0240090>] (msa_irq_exit) from [<c02677e0>] (__handle_domain_irq+0x110/0x148) [<c02677e0>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118) [<c0201588>] (gic_handle_irq) from [<c0551700>] (__irq_svc+0x40/0x58) Exception stack(0xc0a01f30 to 0xc0a01f78) 1f20: c0ae8b40 00000000 00000000 00000000 1f40: 00000002 ffffe000 c0601f9c 00000000 ffffffff c0a2257c c0a22440 c0831a38 1f60: c0a01ec4 c0a01f80 c0203714 c0203718 600e0213 ffffffff [<c0551700>] (__irq_svc) from [<c0203718>] (arch_cpu_idle+0x20/0x3c) [<c0203718>] (arch_cpu_idle) from [<c025bfd8>] (cpu_startup_entry+0x244/0x29c) [<c025bfd8>] (cpu_startup_entry) from [<c054b0d8>] (rest_init+0xc8/0x10c) [<c054b0d8>] (rest_init) from [<c0800c58>] (start_kernel+0x468/0x514) Code: a40599e5 016086e2 018088e2 7660efe6 (503090e5) ---[ end trace 1db21d6d09c49d74 ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU3: stopping CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D O 4.4.185 #1 Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 4a6a1385 ] Do not try to return a fragment entry from TC list. Otherwise we may not clean properly allocated entries. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit e8df7e8c ] When queues >= 4 we use different registers but we were not subtracting the offset of 4. Fix this. Found out by Coverity. Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit debea2cd ] A call to 'kfree_skb()' is missing in the error handling path of 'init_one()'. This is already present in 'remove_one()' but is missing here. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Vasily Gorbik authored
[ Upstream commit 24350fda ] Perf relies on _etext and _stext symbols being one of 't', 'T', 'v' or 'V'. Put them into .text section to guarantee that. Also moves padding to page boundary inside .text which has an effect that .text section is now padded with nops rather than 0's, which apparently has been the initial intention for specifying 0x0700 fill expression. Reported-by:
Thomas Richter <tmricht@linux.ibm.com> Tested-by:
Andreas Krebbel <krebbel@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Sebastien Tisserant authored
[ Upstream commit ee9d6618 ] Fix kernel oops when mounting a encryptData CIFS share with CONFIG_DEBUG_VIRTUAL Signed-off-by:
Sebastien Tisserant <stisserant@wallix.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Pavel Shilovsky authored
[ Upstream commit 3edeb4a4 ] When a reconnect happens in the middle of processing a compound chain the code leaks a buffer from the memory pool. Fix this by properly checking for a return code and freeing buffers in case of error. Also maintain a buf variable to be equal to either smallbuf or bigbuf depending on a response buffer size while parsing a chain and when returning to the caller. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit f7ccbed6 ] In commit fe64ba5c ("drm/rockchip: Resume DP early") we moved resume to be early but left suspend at its normal time. This seems like it could be OK, but casues problems if a suspend gets interrupted partway through. The OS only balances matching suspend/resume levels. ...so if suspend was called then resume will be called. If suspend late was called then resume early will be called. ...but if suspend was called resume early might not get called. This leads to an unbalance in the clock enables / disables. Lets take the simple fix and just move suspend to be late to match. This makes the PM core take proper care in keeping things balanced. Fixes: fe64ba5c ("drm/rockchip: Resume DP early") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190802184616.44822-1-dianders@chromium.orgSigned-off-by:
-
Nicolas Saenz Julienne authored
[ Upstream commit 1c703b53 ] Some a4tech mice use the 'GenericDesktop.00b8' usage to inform whether the previous wheel report was horizontal or vertical. Before c01908a1 ("HID: input: add mapping for "Toggle Display" key") this usage was being mapped to 'Relative.Misc'. After the patch it's simply ignored (usage->type == 0 & usage->code == 0). Which ultimately makes hid-a4tech ignore the WHEEL/HWHEEL selection event, as it has no usage->type. We shouldn't rely on a mapping for that usage as it's nonstandard and doesn't really map to an input event. So we bypass the mapping and make sure the custom event handling properly handles both reports. Fixes: c01908a1 ("HID: input: add mapping for "Toggle Display" key") Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
István Váradi authored
[ Upstream commit 7bc74853 ] The Saitek X52 joystick has a pair of axes that are originally (by the Windows driver) used as mouse pointer controls. The corresponding usage->hid values are 0x50024 and 0x50026. Thus they are handled as unknown axes and both get mapped to ABS_MISC. The quirk makes the second axis to be mapped to ABS_MISC1 and thus made available separately. [jkosina@suse.cz: squashed two patches into one] Signed-off-by:
István Váradi <ivaradi@varadiistvan.hu> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit dea1bb35 ] People are reporing seeing fscache errors being reported concerning duplicate cookies even in cases where they are not setting up fscache at all. The rule needs to be that if fscache is not enabled, then it should have no side effects at all. To ensure this is the case, we disable fscache completely on all superblocks for which the 'fsc' mount option was not set. In order to avoid issues with '-oremount', we also disable the ability to turn fscache on via remount. Fixes: f1fe29b4 ("NFS: Use i_writecount to control whether...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200145Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Steve Dickson <steved@redhat.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit c77e2283 ] John Hubbard reports seeing the following stack trace: nfs4_do_reclaim rcu_read_lock /* we are now in_atomic() and must not sleep */ nfs4_purge_state_owners nfs4_free_state_owner nfs4_destroy_seqid_counter rpc_destroy_wait_queue cancel_delayed_work_sync __cancel_work_timer __flush_work start_flush_work might_sleep: (kernel/workqueue.c:2975: BUG) The solution is to separate out the freeing of the state owners from nfs4_purge_state_owners(), and perform that outside the atomic context. Reported-by:
John Hubbard <jhubbard@nvidia.com> Fixes: 0aaaf5c4 ("NFS: Cache state owners after files are closed") Signed-off-by:
-
Wang Xiayang authored
[ Upstream commit 3690c8c9 ] strncpy() does not ensure NULL-termination when the input string size equals to the destination buffer size 30. The output string is passed to qed_int_deassertion_aeu_bit() which calls DP_INFO() and relies NULL-termination. Use strlcpy instead. The other conditional branch above strncpy() needs no fix as snprintf() ensures NULL-termination. This issue is identified by a Coccinelle script. Signed-off-by:
Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Signed-off-by:
-
Wang Xiayang authored
[ Upstream commit e787f193 ] strncpy() does not ensure NULL-termination when the input string size equals to the destination buffer size IFNAMSIZ. The output string is passed to dev_info() which relies on the NULL-termination. Use strlcpy() instead. This issue is identified by a Coccinelle script. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Wang Xiayang authored
[ Upstream commit cd28aa2e ] strncpy() does not ensure NULL-termination when the input string size equals to the destination buffer size IFNAMSIZ. The output string 'name' is passed to dev_info which relies on NULL-termination. Use strlcpy() instead. This issue is identified by a Coccinelle script. Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit 6bbfe4e6 ] Michael reported an issue with perf bench numa failing with binding to cpu0 with '-0' option. # perf bench numa mem -p 3 -t 1 -P 512 -s 100 -zZcm0 --thp 1 -M 1 -ddd # Running 'numa/mem' benchmark: # Running main, "perf bench numa numa-mem -p 3 -t 1 -P 512 -s 100 -zZcm0 --thp 1 -M 1 -ddd" binding to node 0, mask: 0000000000000001 => -1 perf: bench/numa.c:356: bind_to_memnode: Assertion `!(ret)' failed. Aborted (core dumped) This happens when the cpu0 is not part of node0, which is the benchmark assumption and we can see that's not the case for some powerpc servers. Using correct node for cpu0 binding. Reported-by:
Michael Petlan <mpetlan@redhat.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20190801142642.28004-1-jolsa@kernel.orgSigned-off-by:
-
Jia-Ju Bai authored
net: phy: phy_led_triggers: Fix a possible null-pointer dereference in phy_led_trigger_change_speed() [ Upstream commit 271da132 ] In phy_led_trigger_change_speed(), there is an if statement on line 48 to check whether phy->last_triggered is NULL: if (!phy->last_triggered) When phy->last_triggered is NULL, it is used on line 52: led_trigger_event(&phy->last_triggered->trigger, LED_OFF); Thus, a possible null-pointer dereference may occur. To fix this bug, led_trigger_event(&phy->last_triggered->trigger, LED_OFF) is called when phy->last_triggered is not NULL. This bug is found by a static analysis tool STCheck written by the OSLAB group in Tsinghua University. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Juliana Rodrigueiro authored
[ Upstream commit d8a1de3d ] Since linux 4.9 it is not possible to use buffers on the stack for DMA transfers. During usb probe the driver crashes with "transfer buffer is on stack" message. This fix k-allocates a buffer to be used on "read_reg_atomic", which is a macro that calls "usb_control_msg" under the hood. Kernel 4.19 backtrace: usb_hcd_submit_urb+0x3e5/0x900 ? sched_clock+0x9/0x10 ? log_store+0x203/0x270 ? get_random_u32+0x6f/0x90 ? cache_alloc_refill+0x784/0x8a0 usb_submit_urb+0x3b4/0x550 usb_start_wait_urb+0x4e/0xd0 usb_control_msg+0xb8/0x120 hfcsusb_probe+0x6bc/0xb40 [hfcsusb] usb_probe_interface+0xc2/0x260 really_probe+0x176/0x280 driver_probe_device+0x49/0x130 __driver_attach+0xa9/0xb0 ? driver_probe_device+0x130/0x130 bus_for_each_dev+0x5a/0x90 driver_attach+0x14/0x20 ? driver_probe_device+0x130/0x130 bus_add_driver+0x157/0x1e0 driver_register+0x51/0xe0 usb_register_driver+0x5d/0x120 ? 0xf81ed000 hfcsusb_drv_init+0x17/0x1000 [hfcsusb] do_one_initcall+0x44/0x190 ? free_unref_page_commit+0x6a/0xd0 do_init_module+0x46/0x1c0 load_module+0x1dc1/0x2400 sys_init_module+0xed/0x120 do_fast_syscall_32+0x7a/0x200 entry_SYSENTER_32+0x6b/0xbe Signed-off-by:
Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com> Signed-off-by:
-
David Howells authored
[ Upstream commit c69565ee ] Fix the fact that a notification isn't sent to the recvmsg side to indicate a call failed when sendmsg() fails to transmit a DATA packet with the error ENETUNREACH, EHOSTUNREACH or ECONNREFUSED. Without this notification, the afs client just sits there waiting for the call to complete in some manner (which it's not now going to do), which also pins the rxrpc call in place. This can be seen if the client has a scope-level IPv6 address, but not a global-level IPv6 address, and we try and transmit an operation to a server's IPv6 address. Looking in /proc/net/rxrpc/calls shows completed calls just sat there with an abort code of RX_USER_ABORT and an error code of -ENETUNREACH. Fixes: c54e43d7 ("rxrpc: Fix missing start of call timeout") Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Reviewed-by:
Jeffrey Altman <jaltman@auristor.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 60034d3d ] There is a potential deadlock in rxrpc_peer_keepalive_dispatch() whereby rxrpc_put_peer() is called with the peer_hash_lock held, but if it reduces the peer's refcount to 0, rxrpc_put_peer() calls __rxrpc_put_peer() - which the tries to take the already held lock. Fix this by providing a version of rxrpc_put_peer() that can be called in situations where the lock is already held. The bug may produce the following lockdep report: ============================================ WARNING: possible recursive locking detected 5.2.0-next-20190718 #41 Not tainted -------------------------------------------- kworker/0:3/21678 is trying to acquire lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: __rxrpc_put_peer /net/rxrpc/peer_object.c:415 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_put_peer+0x2d3/0x6a0 /net/rxrpc/peer_object.c:435 but task is already holding lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_dispatch /net/rxrpc/peer_event.c:378 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_worker+0x6b3/0xd02 /net/rxrpc/peer_event.c:430 Fixes: 330bdcfa ("rxrpc: Fix the keepalive generator [ver #2]") Reported-by: syzbot+72af434e4b3417318f84@syzkaller.appspotmail.com Signed-off-by:
-
Jozsef Kadlecsik authored
[ Upstream commit 6c1f7e2c ] Shijie Luo reported that when stress-testing ipset with multiple concurrent create, rename, flush, list, destroy commands, it can result ipset <version>: Broken LIST kernel message: missing DATA part! error messages and broken list results. The problem was the rename operation was not properly handled with respect of listing. The patch fixes the issue. Reported-by:
Shijie Luo <luoshijie1@huawei.com> Signed-off-by:
Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit 1b4a7510 ] In commit 8cc4ccf5 ("ipset: Allow matching on destination MAC address for mac and ipmac sets"), ipset.git commit 1543514c46a7, I added to the KADT functions for sets matching on MAC addreses the copy of source or destination MAC address depending on the configured match. This was done correctly for hash:mac, but for hash:ip,mac and bitmap:ip,mac, copying and pasting the same code block presents an obvious problem: in these two set types, the MAC address is the second dimension, not the first one, and we are actually selecting the MAC address depending on whether the first dimension (IP address) specifies source or destination. Fix this by checking for the IPSET_DIM_TWO_SRC flag in option flags. This way, mixing source and destination matches for the two dimensions of ip,mac set types works as expected. With this setup: ip netns add A ip link add veth1 type veth peer name veth2 netns A ip addr add 192.0.2.1/24 dev veth1 ip -net A addr add 192.0.2.2/24 dev veth2 ip link set veth1 up ip -net A link set veth2 up dst=$(ip netns exec A cat /sys/class/net/veth2/address) ip netns exec A ipset create test_bitmap bitmap:ip,mac range 192.0.0.0/16 ip netns exec A ipset add test_bitmap 192.0.2.1,${dst} ip netns exec A iptables -A INPUT -m set ! --match-set test_bitmap src,dst -j DROP ip netns exec A ipset create test_hash hash:ip,mac ip netns exec A ipset add test_hash 192.0.2.1,${dst} ip netns exec A iptables -A INPUT -m set ! --match-set test_hash src,dst -j DROP ipset correctly matches a test packet: # ping -c1 192.0.2.2 >/dev/null # echo $? 0 Reported-by:
Chen Yi <yiche@redhat.com> Fixes: 8cc4ccf5 ("ipset: Allow matching on destination MAC address for mac and ipmac sets") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit b89d1548 ] In commit 8cc4ccf5 ("ipset: Allow matching on destination MAC address for mac and ipmac sets"), ipset.git commit 1543514c46a7, I removed the KADT check that prevents matching on destination MAC addresses for hash:mac sets, but forgot to remove the same check for hash:ip,mac set. Drop this check: functionality is now commented in man pages and there's no reason to restrict to source MAC address matching anymore. Reported-by:
-
Jia-Ju Bai authored
[ Upstream commit b55f3b84 ] In hwsim_dump_radio_nl(), when genlmsg_put() on line 3617 fails, hdr is assigned to NULL. Then hdr is used on lines 3622 and 3623: genl_dump_check_consistent(cb, hdr); genlmsg_end(skb, hdr); Thus, possible null-pointer dereferences may occur. To fix these bugs, hdr is used here when it is not NULL. This bug is found by a static analysis tool STCheck written by us. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit a0d57a55 ] In start_isoc_chain(), usb_alloc_urb() on line 1392 may fail and return NULL. At this time, fifo->iso[i].urb is assigned to NULL. Then, fifo->iso[i].urb is used at some places, such as: LINE 1405: fill_isoc_urb(fifo->iso[i].urb, ...) urb->number_of_packets = num_packets; urb->transfer_flags = URB_ISO_ASAP; urb->actual_length = 0; urb->interval = interval; LINE 1416: fifo->iso[i].urb->... LINE 1419: fifo->iso[i].urb->... Thus, possible null-pointer dereferences may occur. To fix these bugs, "continue" is added to avoid using fifo->iso[i].urb when it is NULL. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by:
-
Michal Kalderon authored
[ Upstream commit 81af04b4 ] The hw_ver field was initialized to zero. Return the chip revision. This is relevant for rdma driver. Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Bob Ham authored
[ Upstream commit 9a07406b ] The BroadMobi BM818 M.2 card uses the QMI protocol Signed-off-by:
Bob Ham <bob.ham@puri.sm> Signed-off-by:
Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by:
-
