- 30 Apr, 2009 11 commits
-
-
Thomas Gleixner authored
This is necessary to avoid the conflict of syscall numbers. Conflicts: arch/x86/ia32/ia32entry.S arch/x86/include/asm/unistd_32.h arch/x86/include/asm/unistd_64.h Fixes up the borked syscall numbers of perfcounters versus preadv/pwritev as well. Signed-off-by:Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
Make the new sys_rt_tgsigqueueinfo available for x86. Signed-off-by: -
Thomas Gleixner authored
sys_kill has the per thread counterpart sys_tgkill. sigqueueinfo is missing a thread directed counterpart. Such an interface is important for migrating applications from other OSes which have the per thread delivery implemented. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Roland McGrath <roland@redhat.com> Acked-by:
Ulrich Drepper <drepper@redhat.com>
-
Thomas Gleixner authored
Split out the code from do_tkill to make it reusable by the follow up patch which implements sys_rt_tgsigqueueinfo Signed-off-by:
-
Ingo Molnar authored
Bail out early if a record has zero size - we have no chance to make reliable progress in that case. Print out the offset where this happens, and print the number of bytes we missed out on. Signed-off-by:Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Turn on scaling display by default - this is less confusing. Signed-off-by: -
Ingo Molnar authored
Build it explicitly until it's a proper builtin command. Signed-off-by: -
Paul Mackerras authored
This adds my name to the list of copyright holders on the core perf_counter.c, since I have contributed a significant amount of the code in there. Signed-off-by:
Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.59200.888049.746658@cargo.ozlabs.ibm.com> Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Fix min function comparison warning ecryptfs: fix printk format warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect. V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual Express V4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PM V4L/DVB (11570): patch: s2255drv: fix race condition on set mode V4L/DVB (11568): cx18: Fix the handling of i2c bus registration error V4L/DVB (11561a): move media after i2c V4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-free V4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leak V4L/DVB (11494a): cx231xx Kconfig fixes V4L/DVB (11494): cx18: Send correct input routing value to external audio multiplexers
-
- 29 Apr, 2009 29 commits
-
-
Robert Richter authored
Standardize on explicitly mentioning '_mask' in fields that are not plain flags but masks. This avoids typos like: if (cpuc->used) (which could easily slip through review unnoticed), while if a typo looks like this: if (cpuc->used_mask) it might get noticed during review. [ Impact: cleanup ] Signed-off-by:Robert Richter <robert.richter@amd.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1241016956-24648-1-git-send-email-robert.richter@amd.com> Signed-off-by:
-
Devin Heitmueller authored
A regression was introduced in hg changeset 33810c734a0d, which resulted in a kernel panic whenever the device was disconnected from USB. The call to 4l2_device_register() was overwriting the pointer for usb_set_intfdata(), so when au0828_usb_disconnect() was called, the usb_get_intfdata() returned a pointer to the v4l2_device instead of the au0828_dev structure. Signed-off-by:
Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Christopher Pascoe authored
Two fixes for DViCO FusionHDTV DVB-T Dual Express: * Reset correct tuner when reinitializing xc3028. * Disable the I2C gate control to avoid locking up the I2C bus. Tested-by:
John Knops <jknops@australiaonline.net.au> Reviewed-by:
Steven Toth <stoth@linuxtv.org> Signed-off-by:
Christopher Pascoe <linuxdvb@itee.uq.edu.au> Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Dean Anderson authored
set_modeready flag must be set before command sent to USB in s2255_write_config. Signed-off-by:
Dean Anderson <dean@sensoray.com> Signed-off-by:
-
Jean Delvare authored
* Return actual error values as returned by the i2c subsystem, rather than 0 or 1. * If the registration of the second bus fails, unregister the first one before exiting, otherwise we are leaking resources. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Acked-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Guennadi Liakhovetski authored
Currently drivers/media drivers are linked very early - directly after base, block, misc, and mfd and before ata, scsi, ide, input, firewire, usb, and i2c. This breaks static build of video4linux drivers, that use generic CPU i2c adapter drivers and the v4l2-subdev subsystem, because during video4linux probing the v4l2-subdev core requires a struct i2c_adapter context, which cannot be satisfied before the i2c subsystem is initialised. Moving drivers/media after drivers/i2c fixes this problem. The best way to trigger action is by submitting a patch:-) So, let's see what comes out of it - on the one hand I don't see any reason why media has to be linked this early, and nobody was able to give me one yesterday as this problem has been discussed on linux-media, OTOH, maybe indeed it would be better to move i2c the whole way up above media, but that'd be much bigger of a change, I think. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlSigned-off-by:
-
Dan Carpenter authored
I lowered the kfree(t) down a couple lines and removed the superflous "t->vdev = NULL;" Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Dan Carpenter authored
I moved the kfree() down a couple lines. t->vdev is going to be in freed memory so there is no point setting it to NULL. I added a kfree(t) on a Signed-off-by: -
Mauro Carvalho Chehab authored
selecting ALSA module breaks if !SND. Just remove select. While here, let's fix the whitespacing at the Kconfig. Signed-off-by: -
Andy Walls authored
A late v4l2_subdev framework change accidentally sent the audio input routing value to the external multiplexer, instead of the muxer input routing value to the external multiplexer. This change corrects that error. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits) e100: do not go D3 in shutdown unless system is powering off netfilter: revised locking for x_tables Bluetooth: Fix connection establishment with low security requirement Bluetooth: Add different pairing timeout for Legacy Pairing Bluetooth: Ensure that HCI sysfs add/del is preempt safe net: Avoid extra wakeups of threads blocked in wait_for_packet() net: Fix typo in net_device_ops description. ipv4: Limit size of route cache hash table Add reference to CAPI 2.0 standard Documentation/isdn/INTERFACE.CAPI update Documentation/isdn/00-INDEX ixgbe: Fix WoL functionality for 82599 KX4 devices veth: prevent oops caused by netdev destructor xfrm: wrong hash value for temporary SA forcedeth: tx timeout fix net: Fix LL_MAX_HEADER for CONFIG_TR_MODULE mlx4_en: Handle page allocation failure during receive mlx4_en: Fix cleanup flow on cq activation vlan: update vlan carrier state for admin up/down netfilter: xt_recent: fix stack overread in compat code ...
-
Paul Mackerras authored
POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by:
-
Ingo Molnar authored
Acked-by:
-
Robert Richter authored
The documentation about the perf-top build was outdated after perfstat has been implemented. This updates it. [ Impact: update documentation ] Signed-off-by:
-
Robert Richter authored
The mask argument is unused and thus can be removed. [ Impact: cleanup ] Signed-off-by:
-
Robert Richter authored
The function fixed_mode_idx() is used generically. Now it checks the num_counters_fixed value instead of the vendor to decide if fixed counters are present. [ Impact: generalize code ] Signed-off-by:
-
Robert Richter authored
In x86 pmus the allowed counter period to programm differs. This introduces a max_period value and allows the generic implementation for all models to check the max period. [ Impact: generalize code ] Signed-off-by:
-
Robert Richter authored
To check on AMD cpus if a counter overflows, the upper bit of the raw counter value must be checked. This value is already internally available in x86_perf_counter_update(). Now, the value is returned so that it can be used directly to check for overflows. [ Impact: micro-optimization ] Signed-off-by:
-
Robert Richter authored
This patch implements the interrupt handler for AMD performance counters. In difference to the Intel pmu, there is no single status register and also there are no fixed counters. This makes the handler very different and it is useful to make the handler vendor specific. To check if a counter is overflowed the upper bit of the counter is checked. Only counters where the active bit is set are checked. With this patch throttling is enabled for AMD performance counters. This patch also reenables Linux performance counters on AMD cpus. [ Impact: re-enable perfcounters on AMD CPUs ] Signed-off-by:
-
Robert Richter authored
Some functions are only called if the pmu was proper initialized. That initalization checks can be removed. The way to check initialization changed too. Now, the pointer to the interrupt handler is checked. If it exists the pmu is initialized. This also removes a static variable and uses struct x86_pmu as only data source for the check. [ Impact: simplify code ] Signed-off-by:
-
Robert Richter authored
As for the enable function, this patch reworks the disable functions and introduces x86_pmu_disable_counter(). The internal function i/f in struct x86_pmu changed too. [ Impact: refactor and generalize code ] Signed-off-by:
-
Robert Richter authored
There is vendor specific code in generic x86 code, and there is vendor specific code that could be generic. This patch introduces x86_pmu_enable_counter() for x86 generic code. Fixed counter code for Intel is moved to Intel only functions. In the end, checks and calls via function pointers were reduced to the necessary. Also, the internal function i/f changed. [ Impact: refactor and generalize code ] Signed-off-by:
-
Robert Richter authored
The type of counter index is sometimes implemented as unsigned int. This patch changes this to have a consistent usage of int. [ Impact: cleanup ] Signed-off-by:
-
Robert Richter authored
cpuc->active will now be used to indicate an enabled counter which implies also valid pointers of cpuc->counters[]. In contrast, cpuc->used only locks the counter, but it can be still uninitialized. [ Impact: refactor and generalize code ] Signed-off-by:
-
Robert Richter authored
This is to have a consistent naming scheme with cpuc->used. [ Impact: cleanup ] Signed-off-by:
-
Robert Richter authored
[ Impact: micro-optimization ] Signed-off-by:
-
Robert Richter authored
This makes the use of the version variable generic. Also, some debug messages have been generalized. [ Impact: refactor and generalize code ] Signed-off-by:
-
Robert Richter authored
[ Impact: refactor and generalize code ] Signed-off-by:
-
