- 28 Dec, 2017 33 commits
-
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by:
-
Geert Uytterhoeven authored
Document support for the Watchdog Timer (WDT) Controller in the Renesas R-Car V3M (r8a77970) SoC. Restore sort order while at it. No driver update is needed. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Tomas Winkler authored
Fixes sparse warning: drivers/watchdog/mei_wdt.c:530:18: warning: Variable length array is used Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
Alexander Usyskin <alexander.usyskin@intel.com> Reviewed-by:
-
Radu Rendec authored
The initial info message (early in the esb_probe() function) is not very useful and we already have a message on successful probe, which includes device identification. If the probe fails (e.g. PCI related errors), additional messages are printed anyway. The version number was only used in the initial info message. Other than that, it serves no useful purpose and it ran out of favor upstream anyway. Signed-off-by:
Radu Rendec <rrendec@arista.com> Reviewed-by:
-
Radu Rendec authored
The minimum, maximum and default values for the watchdog heartbeat (timeout) were hardcoded in several places (including module parameter description and warning message for invalid module parameter value). This patch adds macros for the aforementioned values and replaces all occurences of hardcoded values by these macros. Signed-off-by:
-
Radu Rendec authored
Support multiple i6300esb devices simultaneously, by removing the single device restriction in the original design and leveraging the multiple device support of the watchdog subsystem. This patch replaces the global definitions of watchdog device data with a dynamically allocated structure. This structure is allocated during device probe, so multiple independent structures can be allocated if multiple devices are probed. Signed-off-by:
-
Radu Rendec authored
Change the i6300esb driver to use the watchdog subsystem instead of the legacy watchdog API. This is mainly just getting rid of the "write" and "ioctl" methods and part of the watchdog control logic (which are all implemented by the watchdog subsystem). Even though the watchdog subsystem supports registering and handling multiple watchdog devices at the same time, the i6300esb driver still has a limitation of only one i6300esb device due to some global variable usage that comes from the original design. However, the driver can now coexist with other watchdog devices (supported by different drivers). Signed-off-by:
-
Jerry Hoemann authored
Do not claim the NMI (i.e. return NMI_DONE) if the source of the NMI isn't the iLO watchdog or debug. Signed-off-by:
Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by:
-
Corentin Labbe authored
The usage of of_device_get_match_data reduce the code size a bit. Furthermore, it prevents an improbable dereference when of_match_device() return NULL. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by:
-
Arnd Bergmann authored
The Xen watchdog driver uses __kernel_time_t and ktime_to_timespec() internally for managing its timeouts. Both are deprecated because of y2038 problems. The driver itself is fine, since it only uses monotonic times, but converting it to use ktime_get_seconds() avoids the deprecated interfaces and is slightly simpler. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Michael Grzeschik authored
This patch removes the windows protection routine that got now covered by the wdt core. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by:
-
Michael Grzeschik authored
The DA9062 watchdog occasionally enters error condition and resets the system if the timeout is changed quickly after the timer was enabled. The method of disabling and waiting for > 150 µs before setting the new timeout is taken from the DA9052 driver. Signed-off-by:
-
Michael Grzeschik authored
Register a restart handler for the da9062 watchdog. System restart is triggered by sending the shutdown command to the PMIC. As more-suitable restart handlers may exist, the priority of the watchdog restart handler is set to 128. Signed-off-by:
-
Linus Walleij authored
The Moxart does not appear to be using the interrupt from the watchdog timer, maybe it's not even routed, so as to support more architectures with this driver, make the interrupt optional. While we are at it: actually enable the use of the interrupt if present by setting the right bit in the control register and define the missing control register bits. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Linus Walleij authored
This renames all the driver files and symbols for the Gemini watchdog to FTWDT010 as it has been revealed that this IP block is a generic watchdog timer from Faraday Technology used in several SoC designs. Select this driver by default for the Gemini, it is a sensible driver to always have enabled. Signed-off-by:
-
Linus Walleij authored
The device tree bindings are in two copies and also should be consolidated into a single Faraday Technology FTWDT010 binding since we uncovered that this IP part is a standard IP from Faraday. Cc: devicetree@vger.kernel.org Acked-by:
-
Chris Packham authored
Correct typo in comment "insterted" -> "inserted". Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
-
Linus Walleij authored
This converts the GPIO watchdog driver to use GPIO descriptors instead of relying on the old method to read out GPIO numbers from the device tree and then using those with the old GPIO API. The descriptor API keeps track of whether the line is active low so we can remove all active low handling and rely on the GPIO descriptor to deal with this for us. Signed-off-by:
-
Linus Walleij authored
This add "dev" and "np" variables to make the probe() function a bit easier to read. Signed-off-by:
-
Oleksij Rempel authored
The only way of stopping the watchdog is by resetting it. Add the watchdog op for stopping the device and reset if a reset line is provided. At same time WDOG_HW_RUNNING should be remove from dw_wdt_start. As commented by Guenter Roeck: dw_wdt sets WDOG_HW_RUNNING in its open function. Result is that the kref_get() in watchdog_open() won't be executed. But then kref_put() in close will be called since the watchdog now does stop. This causes the imbalance. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Reviewed-by:
-
Andrew Jeffery authored
Probing at device_initcall time lead to perverse cases where the watchdog was probed after, say, I2C devices, which then leaves a potentially running watchdog at the mercy of I2C device behaviour and bus conditions. Load the watchdog driver early to ensure that the kernel is patting it well before initialising peripherals. Signed-off-by:
Andrew Jeffery <andrew@aj.id.au> Reviewed-by:
-
Andrew Jeffery authored
The driver also supports the watchdog in the AST25xx series, and may work on earlier SoCs as well. Signed-off-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
-
Andrew Jeffery authored
Apseed sounds like a good name for a web/mobile start-up incubator, but isn't a reflection of Aspeed themselves. Signed-off-by:
-
Andrew Jeffery authored
An unintended post-condition of probe() is that the watchdog is disabled. This behaviour was introduced by an unnecessary write to the control register to configure the hardware based on the devicetree. The write is unnecessary because the cached control value that is manipulated by the code parsing the devicetree is eventually written by aspeed_wdt_enable(), which is when we care how the control register should be configured. Remove the write to restore expected behaviour. Fixes: b7f0b8ad ("drivers/watchdog: ASPEED reference dev tree properties for config") Signed-off-by:
-
Mathieu Malaterre authored
Suggested-by:
Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by:
Mathieu Malaterre <malat@debian.org> Acked-by:
-
Mathieu Malaterre authored
The watchdog unit present in the JZ4780 works the same as the one in the JZ4740. Signed-off-by:
-
Andreas Färber authored
Add a watchdog driver for the Realtek RTD1295 SoC. Based on QNAP's arch/arm/mach-rtk119x/driver/rtk_watchdog.c code and mach-rtk119x/driver/dc2vo/fpga/include/iso_reg.h register defines. Signed-off-by:
Andreas Färber <afaerber@suse.de> Reviewed-by:
-
Andreas Färber authored
Add a binding for the Realtek RTD1295 watchdog. Acked-by:
-
Wim Van Sebroeck authored
Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: -
Guenter Roeck authored
Having a co-maintainer will enable us to be more flexible with pull requests. Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
- 17 Dec, 2017 4 commits
-
-
Jerry Hoemann authored
This corrects: commit cce78da7 ("watchdog: hpwdt: Add check for UEFI bits") The test on HPE SMBIOS extension type 219 record "Misc Features" bits for UEFI support is incorrect. The definition of the Misc Features bits in the HPE SMBIOS OEM Extensions specification (and related firmware) was changed to use a different pair of bits to represent UEFI supported. Howerver, a corresponding change to Linux was missed. Current code/platform work because the iCRU test is working. But purpose of cce78da7 is to ensure correct functionality on future systems where iCRU isn't supported. Signed-off-by:
-
Matt Redfearn authored
Commit da2a68b3 ("watchdog: Enable COMPILE_TEST where possible") enabled building the Indy watchdog driver when COMPILE_TEST is enabled. However, the driver makes reference to symbols that are only defined for certain platforms are selected in the config. These platforms select SGI_HAS_INDYDOG. Without this, link time errors result, for example when building a MIPS allyesconfig. drivers/watchdog/indydog.o: In function `indydog_write': indydog.c:(.text+0x18): undefined reference to `sgimc' indydog.c:(.text+0x1c): undefined reference to `sgimc' drivers/watchdog/indydog.o: In function `indydog_start': indydog.c:(.text+0x54): undefined reference to `sgimc' indydog.c:(.text+0x58): undefined reference to `sgimc' drivers/watchdog/indydog.o: In function `indydog_stop': indydog.c:(.text+0xa4): undefined reference to `sgimc' drivers/watchdog/indydog.o:indydog.c:(.text+0xa8): more undefined references to `sgimc' follow make: *** [Makefile:1005: vmlinux] Error 1 Fix this by ensuring that CONFIG_INDIDOG can only be selected when the necessary dependent platform symbols are built in. Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by:
Matt Redfearn <matt.redfearn@mips.com> Cc: <stable@vger.kernel.org> # 4.11 + Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Suggested-by:
James Hogan <james.hogan@mips.com> Reviewed-by:
-
Guenter Roeck authored
If handle_boot_enabled is set to 0, the watchdog driver module use counter will not be increased and kref_get() will not be called when registering the watchdog. Subsequently, on open, this does not happen either because the code believes that it was already done because the hardware watchdog is marked as running. We could introduce a state variable to indicate this state, but let's just increase the module use counter and call kref_get() unconditionally if the hardware watchdog is running when a driver is registering itself to keep the code simple. Fixes: 2501b015 ("watchdog: core: add option to avoid early ...") Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
-
Guenter Roeck authored
If a watchdog driver's open function sets WDOG_HW_RUNNING with the expectation that the watchdog can not be stopped, but then stops the watchdog anyway in its stop function, kref_get() wil not be called in watchdog_open(). If the watchdog then stops on close, WDOG_HW_RUNNING will be cleared and kref_put() will be called, causing a kref imbalance. As result the character device data structure will be released, which in turn will cause the system to crash on the next call to watchdog_open(). Fixes: ee142889 ("watchdog: Introduce WDOG_HW_RUNNING flag") Signed-off-by:
-
- 16 Dec, 2017 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "More fixes from testing done on the rc kernel, including more SELinux testing. Looking forward, lockdep found regression today in ipoib which is still being fixed. Summary: - Fix for SELinux on the umad SMI path. Some old hardware does not fill the PKey properly exposing another bug in the newer SELinux code. - Check the input port as we can exceed array bounds from this user supplied value - Users are unable to use the hash field support as they want due to incorrect checks on the field restrictions, correct that so the feature works as intended - User triggerable oops in the NETLINK_RDMA handler - cxgb4 driver fix for a bad interaction with CQ flushing in iser caused by patches in this merge window, and bad CQ flushing during normal close. - Unbalanced memalloc_noio in ipoib in an error path" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/ipoib: Restore MM behavior in case of tx_ring allocation failure iw_cxgb4: only insert drain cqes if wq is flushed iw_cxgb4: only clear the ARMED bit if a notification is needed RDMA/netlink: Fix general protection fault IB/mlx4: Fix RSS hash fields restrictions IB/core: Don't enforce PKey security on SMI MADs IB/core: Bound check alternate path port number -
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Two bugfixes for the AT24 I2C eeprom driver and some minor corrections for I2C bus drivers" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: piix4: Fix port number check on release i2c: stm32: Fix copyrights i2c-cht-wc: constify platform_device_id eeprom: at24: change nvmem stride to 1 eeprom: at24: fix I2C device selection for runtime PM
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Anna Schumaker: "This has two stable bugfixes, one to fix a BUG_ON() when nfs_commit_inode() is called with no outstanding commit requests and another to fix a race in the SUNRPC receive codepath. Additionally, there are also fixes for an NFS client deadlock and an xprtrdma performance regression. Summary: Stable bugfixes: - NFS: Avoid a BUG_ON() in nfs_commit_inode() by not waiting for a commit in the case that there were no commit requests. - SUNRPC: Fix a race in the receive code path Other fixes: - NFS: Fix a deadlock in nfs client initialization - xprtrdma: Fix a performance regression for small IOs" * tag 'nfs-for-4.15-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: SUNRPC: Fix a race in the receive code path nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests xprtrdma: Spread reply processing over more CPUs nfs: fix a deadlock in nfs client initialization
-
