- 25 Feb, 2019 4 commits
-
-
Darrick J. Wong authored
Fix a backwards endian conversion of a constant. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Allison Henderson <allison.henderson@oracle.com>
-
Darrick J. Wong authored
smatch complained about some uninitialized error returns, so fix those. Signed-off-by:
-
Darrick J. Wong authored
Rework the data flow in xfs_file_iomap_begin where we decide if we have to break shared extents. Signed-off-by:
Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Don't pass raw iomap flags to xfs_reflink_allocate_cow; signal our intention with a boolean argument. Signed-off-by:
-
- 21 Feb, 2019 9 commits
-
-
Colin Ian King authored
A previous commit removed the initialization of variable 'error' to zero, and can cause a bogus error return. This occurs when error contains a non-zero garbage value and the call to xchk_should_terminate detects a pending fatal signal and checks for a zero error before setting it to -EAGAIN. Fix the issue by initializing error to zero. Fixes: b9454fe0 ("xfs: clean up the inode cluster checking in the inobt scrub") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Christoph Hellwig authored
Add a mode where XFS never overwrites existing blocks in place. This is to aid debugging our COW code, and also put infatructure in place for things like possible future support for zoned block devices, which can't support overwrites. This mode is enabled globally by doing a: echo 1 > /sys/fs/xfs/debug/always_cow Note that the parameter is global to allow running all tests in xfstests easily in this mode, which would not easily be possible with a per-fs sysfs file. In always_cow mode persistent preallocations are disabled, and fallocate will fail when called with a 0 mode (with our without FALLOC_FL_KEEP_SIZE), and not create unwritten extent for zeroed space when called with FALLOC_FL_ZERO_RANGE or FALLOC_FL_UNSHARE_RANGE. There are a few interesting xfstests failures when run in always_cow mode: - generic/392 fails because the bytes used in the file used to test hole punch recovery are less after the log replay. This is because the blocks written and then punched out are only freed with a delay due to the logging mechanism. - xfs/170 will fail as the already fragile file streams mechanism doesn't seem to interact well with the COW allocator - xfs/180 xfs/182 xfs/192 xfs/198 xfs/204 and xfs/208 will claim the file system is badly fragmented, but there is not much we can do to avoid that when always writing out of place - xfs/205 fails because overwriting a file in always_cow mode will require new space allocation and the assumption in the test thus don't work anymore. - xfs/326 fails to modify the file at all in always_cow mode after injecting the refcount error, leading to an unexpected md5sum after the remount, but that again is expected Signed-off-by:Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Christoph Hellwig authored
No user of it in the iomap code at the moment, but we should not actively report wrong information if we can trivially get it right. Signed-off-by:
-
Christoph Hellwig authored
If we have racing buffered and direct I/O COW fork extents under writeback can have been moved to the data fork by the time we call xfs_reflink_convert_cow from xfs_submit_ioend. This would be mostly harmless as the block numbers don't change by this move, except for the fact that xfs_bmapi_write will crash or trigger asserts when not finding existing extents, even despite trying to paper over this with the XFS_BMAPI_CONVERT_ONLY flag. Instead of special casing non-transaction conversions in the already way too complicated xfs_bmapi_write just add a new helper for the much simpler non-transactional COW fork case, which simplify ignores not found extents. Signed-off-by:
-
Christoph Hellwig authored
Besides simplifying the code a bit this allows to actually implement the behavior of using COW preallocation for non-COW data mentioned in the current comments. Signed-off-by:
-
Christoph Hellwig authored
This only matters if we want to write data through the COW fork that is not actually an overwrite of existing data. Reasons for that are speculative COW fork allocations using the cowextsize, or a mode where we always write through the COW fork. Currently both can't actually happen, but I plan to enable them. Signed-off-by:
-
Christoph Hellwig authored
While using delalloc for extsize hints is generally a good idea, the current code that does so only for COW doesn't help us much and creates a lot of special cases. Switch it to use real allocations like we do for direct I/O. Signed-off-by:
-
Christoph Hellwig authored
We speculatively allocate extents in the COW fork to reduce fragmentation. But when we write data into such COW fork blocks that do now shadow an allocation in the data fork SEEK_DATA will not correctly report it, as it only looks at the data fork extents. The only reason why that hasn't been an issue so far is because we even use these speculative COW fork preallocations over holes in the data fork at all for buffered writes, and blocks in the COW fork that are written by direct writes are moved into the data fork immediately at I/O completion time. Add a new set of iomap_ops for SEEK_HOLE/SEEK_DATA which looks into both the COW and data fork, and reports all COW extents as unwritten to the iomap layer. While this isn't strictly true for COW fork extents that were already converted to real extents, the practical semantics that you can't read data from them until they are moved into the data fork are very similar, and this will force the iomap layer into probing the extents for actually present data. Signed-off-by:
-
Christoph Hellwig authored
Move checking for invalid zero blocks and setting of various iomap flags into this helper. Also make it deal with "raw" delalloc extents to avoid clutter in the callers. Signed-off-by:
-
- 18 Feb, 2019 1 commit
-
-
Darrick J. Wong authored
Create a separate magic16 check function so that we don't run afoul of static checkers. Signed-off-by:
-
- 17 Feb, 2019 10 commits
-
-
Christoph Hellwig authored
While we can only truncate a block under the page lock for the current page, there is no high-level synchronization for moving extents from the COW to the data fork. This means that for example we can have another thread doing a direct I/O completion that moves extents from the COW to the data fork race with writeback. While this race is very hard to hit the always_cow seems to reproduce it reasonably well, and it also exists without that. Because of that there is a chance that a delalloc conversion for the COW fork might not find any extents to convert. In that case we should retry the whole block lookup and now find the blocks in the data fork. Signed-off-by:
-
Christoph Hellwig authored
Now that we properly handle the race with truncate in the delalloc allocator there is no need to short cut this exceptional case earlier on. Signed-off-by:
-
Christoph Hellwig authored
This function is a small wrapper only used by the writeback code, so move it together with the writeback code and simplify it down to the glorified do { } while loop that is now is. A few bits intentionally got lost here: no need to call xfs_qm_dqattach because quotas are always attached when we create the delalloc reservation, and no need for the imap->br_startblock == 0 check given that xfs_bmapi_convert_delalloc already has a WARN_ON_ONCE for exactly that condition. Signed-off-by: -
Christoph Hellwig authored
This way we can actually count how many bytes got converted and how many calls we need, unlike in the caller which doesn't have the detailed view. Note that this includes a slight change in behavior as the xs_xstrat_quick is now bumped for every allocation instead of just the one covering the requested writeback offset, which makes a lot more sense. Signed-off-by:
-
Christoph Hellwig authored
No need to deal with the transaction and the inode locking in the caller. Note that we also switch to passing whichfork as the second paramter, matching what most related functions do. Signed-off-by:
-
Christoph Hellwig authored
Delalloc conversion has traditionally been part of our function to allocate blocks on disk (first xfs_bmapi, then xfs_bmapi_write), but delalloc conversion is a little special as we really do not want to allocate blocks over holes, for which we don't have reservations. Split the delalloc conversions into a separate helper to keep the code simple and structured. Signed-off-by:
-
Christoph Hellwig authored
We want to be able to reuse them for the upcoming dedidcated delalloc convert routine. Signed-off-by:
-
Christoph Hellwig authored
Move boilerplate code from the callers into xfs_bmap_btree_to_extents: - exit early without failure if we don't need to convert to the extent format - assert that we have a btree cursor - don't reinitialize the passed in logflags argument Signed-off-by:
-
Christoph Hellwig authored
We already ensure all data fits into s_maxbytes in the write / fault path. The only reason we have them here is that they were copy and pasted from xfs_bmapi_read when we stopped using that function. Signed-off-by:
-
Christoph Hellwig authored
The io_type field contains what is basically a summary of information from the inode fork and the imap. But we can just as easily use that information directly, simplifying a few bits here and there and improving the trace points. Signed-off-by:
-
- 15 Feb, 2019 3 commits
-
-
Darrick J. Wong authored
When XFS creates an O_TMPFILE file, the inode is created with nlink = 1, put on the unlinked list, and then the VFS sets nlink = 0 in d_tmpfile. If we crash before anything logs the inode (it's dirty incore but the vfs doesn't tell us it's dirty so we never log that change), the iunlink processing part of recovery will then explode with a pile of: XFS: Assertion failed: VFS_I(ip)->i_nlink == 0, file: fs/xfs/xfs_log_recover.c, line: 5072 Worse yet, since nlink is nonzero, the inodes also don't get cleaned up and they just leak until the next xfs_repair run. Therefore, change xfs_iunlink to require that inodes being put on the unlinked list have nlink == 0, change the tmpfile callers to instantiate nodes that way, and set the nlink to 1 just prior to calling d_tmpfile. Fix the comment for xfs_iunlink while we're at it. Signed-off-by:
-
Darrick J. Wong authored
Log recovery frees all the inodes stored in the unlinked list, which can cause expansion of the free inode btree. The ifree code skips block reservations if it thinks there's a per-AG space reservation, but we don't set up the reservation until after log recovery, which means that a finobt expansion blows up in xfs_trans_mod_sb when we exceed the transaction's block reservation. To fix this, we set the "no finobt reservation" flag to true when we create the xfs_mount and only set it to false if we confirm that every AG had enough free space to put aside for the finobt. Signed-off-by:
Dave Chinner <dchinner@redhat.com>
-
Darrick J. Wong authored
Rename this flag variable to imply more strongly that it's related to the free inode btree (finobt) operation. No functional changes. Signed-off-by:
-
- 14 Feb, 2019 1 commit
-
-
Darrick J. Wong authored
For VFS listxattr calls, xfs_xattr_put_listent calls __xfs_xattr_put_listent twice if it sees an attribute "trusted.SGI_ACL_FILE": once for that name, and again for "system.posix_acl_access". Unfortunately, if we happen to run out of buffer space while emitting the first name, we set count to -1 (so that we can feed ERANGE to the caller). The second invocation doesn't check that the context parameters make sense and overwrites the byte before the buffer, triggering a KASAN report: ================================================================== BUG: KASAN: slab-out-of-bounds in strncpy+0xb3/0xd0 Write of size 1 at addr ffff88807fbd317f by task syz/1113 CPU: 3 PID: 1113 Comm: syz Not tainted 5.0.0-rc6-xfsx #rc6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0xcc/0x180 print_address_description+0x6c/0x23c kasan_report.cold.3+0x1c/0x35 strncpy+0xb3/0xd0 __xfs_xattr_put_listent+0x1a9/0x2c0 [xfs] xfs_attr_list_int_ilocked+0x11af/0x1800 [xfs] xfs_attr_list_int+0x20c/0x2e0 [xfs] xfs_vn_listxattr+0x225/0x320 [xfs] listxattr+0x11f/0x1b0 path_listxattr+0xbd/0x130 do_syscall_64+0x139/0x560 While we're at it we add an assert to the other put_listent to avoid this sort of thing ever happening to the attrlist_by_handle code. Signed-off-by:
-
- 12 Feb, 2019 12 commits
-
-
Brian Foster authored
The v5 superblock format added various metadata fields (such as crc, metadata lsn, owner uuid, etc.) to v4 metadata headers or created new v5 headers for blocks where no such headers existed on v4. Where v4 headers did exist, the v5 structures are careful to place v4 metadata at the original location. For example, the magic value is expected to be at the same location in certain blocks to facilitate version detection. While failure of this invariant is likely to cause severe and obvious problems at runtime, we can detect this condition at compile time via the more recently added on-disk format check infrastructure. Since there is no runtime cost, add some offset checks that start with v5 structure definitions, traverse down to the first bit of common metadata with v4 and ensure that common metadata is at the expected offset. Note that we don't care about blocks which had no v4 header because there is no common metadata in those cases. No functional changes. Signed-off-by:
-
Darrick J. Wong authored
Now that we encode block magic numbers in all the buffer ops, use that for block type detection in the ag header repair code instead of encoding magics directly in the repair code. Signed-off-by:
-
Darrick J. Wong authored
Add dquot magic numbers to the buffer ops type, in case we ever want to use them. Signed-off-by:
-
Darrick J. Wong authored
Use xfs_verify_magic to check the magic numbers of inodes. Signed-off-by:
-
Brian Foster authored
With the verifier magic value helper in place, we've left a bit more duplicate code across the verifiers that involve struct xfs_da3_blkinfo. This includes the da node, xattr leaf and dir leaf verifiers, all of which perform similar checks for v4 and v5 filesystems. Create a common helper to verify an xfs_da3_blkinfo structure, taking care to only access v5 fields where appropriate, and refactor the aforementioned verifiers to use the helper. No functional changes. Signed-off-by:
-
Brian Foster authored
Most buffer verifiers have hardcoded magic value checks conditionalized on the version of the filesystem. The magic value field of the verifier structure facilitates abstraction of some of this code. Populate the ->magic field of various verifiers to take advantage of this abstraction. No functional changes. Signed-off-by:
-
Brian Foster authored
The dir2 leaf verifiers share the same underlying structure verification code, but implement six accessor functions to multiplex the code across the two verifiers. Further, the magic value isn't sufficiently abstracted such that the common helper has to manually fix up the magic from the caller on v5 filesystems. Use the magic field in the verifier structure to eliminate the duplicate code and clean this all up. No functional change. Signed-off-by:
-
Brian Foster authored
The allocation btree verifiers share code that is unable to detect cross-tree magic value corruptions such as a bnobt block with a cntbt magic value. Populate the b_ops->magic field of the associated verifier structures such that the structure verifier can check the magic value against the expected value based on tree type. The btree level check requires knowledge of the tree type to determine the appropriate maximum value. This was previously part of the hardcoded magic value checks. With that code removed, peek at the first magic value in the verifier to determine the expected tree type of the current block. Signed-off-by:
-
Brian Foster authored
Similar to the inode btree verifier, the same allocation btree verifier structure is shared between the by-bno (bnobt) and by-size (cntbt) btrees. This prevents the ability to distinguish magic values between them. Separate the verifier into two, one for each tree, and assign them appropriately. No functional changes. Signed-off-by:
-
Brian Foster authored
The inode btree verifier code is shared between the inode btree and free inode btree because the underlying metadata formats are essentially equivalent. A side effect of this is that the verifier cannot determine whether a particular btree block should have an inobt or finobt magic value. This logic allows an unfortunate xfs_repair bug to escape detection where certain level > 0 nodes of the finobt are stamped with inobt magic by xfs_repair finobt reconstruction. This is fortunately not a severe problem since the inode btree magic values do not contribute to any changes in kernel behavior, but we do need a means to detect and prevent this problem in the future. Add a field to xfs_buf_ops to store the v4 and v5 superblock magic values expected by a particular verifier. Add a helper to check an on-disk magic value against the value expected by the verifier. Call the helper from the shared [f]inobt verifier code for magic value verification. This ensures that the inode btree blocks each have the appropriate magic value based on specific tree type and superblock version. Signed-off-by:
-
Brian Foster authored
The inobt verifier is reused for the inobt and finobt, which prevents the ability to distinguish between magic values on a per-tree basis. Create a separate finobt structure in preparation for changes to enforce the appropriate magic value for the associated tree. This patch has no functional change. Signed-off-by:
-
Brian Foster authored
Most verifiers that check on-disk magic values convert the CPU endian magic value constant to disk endian to facilitate compile time optimization of the byte swap and reduce the need for runtime byte swaps in buffer verifiers. Several buffer verifiers do not follow this pattern. Update those verifiers for consistency. Also fix up a random typo in the inode readahead verifier name. Signed-off-by:
-
