- 27 Nov, 2018 4 commits
-
-
Paul Kocialkowski authored
In order to check whether the backend supports a specific format, an explicit list and a related helper are introduced. The prototype of this helper is added to the header so that it can be called from sun4i_layer later (when introducing tiled mode support). Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-5-paul.kocialkowski@bootlin.com
-
Paul Kocialkowski authored
The backend allows integer-only scaling but can handle alpha components, unlike the frontend. It could be useful to add support for this eventually, so add a short TODO comment describing the situation. Signed-off-by:
-
Paul Kocialkowski authored
The frontend documentation (for the A33) mentions that ARGB is supported as output, but with the alpha component always set to 0xff. In practice, this means that the alpha component cannot be preserved when going through the frontend. Since the information is lost, ARGB is not properly supported. As a result, expose the matching format supported by the frontend (both for input and output) as XRGB instead of ARGB. Since ARGB was the selected format for connecting the frontend to the backend, change it to XRGB to reflect this as well. The A31 and A80 SoCs apparently have a bit to enable proper alpha, but this is not supported at this point (see the comment already in the code). Signed-off-by:
-
Paul Kocialkowski authored
This adds a dedicated function for cleaning the video and YUV source channel layer enable bits. This function is called first on layer atomic update to make sure that there are no leftover bits from previous plane configuration that were not cleaned until now. It fixes issues when alternating between video and YUV planes, where both bits would be set eventually, leading to broken plane display. Signed-off-by:
-
- 24 Nov, 2018 8 commits
-
-
Fernando Ramos authored
This entry asked to rename all drm core "*_reference/_unrefence" functions to "*_get/_put". Now that this task is complete, we can remove this entry from the TODO list. Signed-off-by:
Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Fernando Ramos authored
The coccinelle script was used to rename some (deprecated) functions which no longer exist now. Signed-off-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Fernando Ramos authored
There are no more places where this (deprecated) function is being used from, thus it can now be removed. Signed-off-by:
-
Fernando Ramos authored
There are no more places where this (deprecated) function is being used from, thus it can now be removed. Signed-off-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Fernando Ramos authored
This patch unifies the naming of DRM functions for reference counting as requested on Documentation/gpu/todo.rst Signed-off-by:
-
Fernando Ramos authored
There are no more places where this (deprecated) function is being used from, thus it can now be removed. Signed-off-by:
-
Fernando Ramos authored
This patch unifies the naming of DRM functions for reference counting as requested on Documentation/gpu/todo.rst Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Acked-by:
Alexey Brodkin <abrodkin@synopsys.com> Acked-by:
Stefan Agner <stefan@agner.ch> Reviewed-by:
-
Fernando Ramos authored
There are no more places where these (deprecated) functions are being used from, thus they can now be removed. Signed-off-by:
-
- 23 Nov, 2018 2 commits
-
-
Ville Syrjälä authored
For real commits we WARN if ->hw_done hasn't been completed by the time drm_atomic_helper_commit_cleanup_done() is called. Let's do the same for the fake commit. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181122143412.11655-2-ville.syrjala@linux.intel.comReviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Ville Syrjälä authored
Consider the following scenario: 1. nonblocking enable crtc 2. wait for the event 3. nonblocking disable crtc On i915 this can lead to a spurious -EBUSY from step 3 on account of non-enabled planes getting the fake_commit in step 1 and we don't complete the fake_commit-> flip_done until drm_atomic_helper_commit_hw_done() which can happen a long time after the flip event was sent out. This will become somewhat easy to hit on SKL+ once we start to add all the planes for the crtc to every modeset commit for the purposes of forcing a watermark register programming [1]. To make the race a little less pronounced let's complete fake_commit->flip_done after drm_atomic_helper_wait_for_flip_done(). For the single crtc case this should make the race quite theoretical, assuming drm_atomic_helper_wait_for_flip_done() actually has to wait for the real commit flip_done. In case the real commit flip_done gets completed singificantly before drm_atomic_helper_wait_for_flip_done(), or we are dealing with multiple crtcs whose vblanks don't line up nicely the race still exists. [1] https://patchwork.freedesktop.org/patch/262670/ Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 080de2e5 ("drm/atomic: Check for busy planes/connectors before setting the commit") Testcase: igt/kms_cursor_legacy/*nonblocking-modeset-vs-cursor-atomic Signed-off-by:
-
- 22 Nov, 2018 3 commits
-
-
Noralf Trønnes authored
drivers/gpu/drm/drm_prime.c: In function 'drm_gem_prime_mmap': >> drivers/gpu/drm/drm_prime.c:688:1: warning: the frame size of 1592 bytes is larger than 1024 bytes [-Wframe-larger-than=] Fix by allocating on the heap. Fixes: 7698799f ("drm/prime: Add drm_gem_prime_mmap()") Reported-by:
kbuild test robot <lkp@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Christian König <christian.koenig@amd.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181121180215.13881-1-noralf@tronnes.org
-
Qiang Yu authored
Render like lima will attach a fence to the framebuffer dma_buf, display like sun4i should wait it finish before show the framebuffer. Otherwise tearing will be observed. Signed-off-by:
Qiang Yu <yuq825@gmail.com> Signed-off-by:
-
Daniel Vetter authored
Ever since commit cb6458f9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Aug 8 15:41:34 2013 +0200 drm: remove procfs code, take 2 Having the code shared between procfs and debugfs in the separate drm_info.c file stopped making sense. Merge them. Noticed because Lyude asked some questions on irc about why we even have drm_info_node and I remember this old story. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121213510.31260-1-daniel.vetter@ffwll.ch
-
- 21 Nov, 2018 7 commits
-
-
Koen Kooi authored
Suggested by Qiang Yu <yuq825@gmail.com> to fix tearing artefacts in the Kodi GUI. Suggested-by:
Koen Kooi <koen@dominion.thruhere.net> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> [narmstrong: added Suggested-by tag] Signed-off-by:
-
Gerd Hoffmann authored
linux guest driver implementation of the VIRTIO_GPU_F_EDID feature. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
Daniel Vetter <daniel@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20181030063206.19528-3-kraxel@redhat.com
-
Gerd Hoffmann authored
The feature allows the guest request an EDID blob (describing monitor capabilities) for a given scanout (aka virtual monitor connector). It brings a new command message, which has just a scanout field (beside the standard virtio-gpu header) and a response message which carries the EDID data. Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20181030063206.19528-2-kraxel@redhat.com
-
Christophe Fergeau authored
QEMU keeps a vram reference to the last QXLCursorCmd it received. This QXLCursorCmd command points to a QXLCursor instance (stored in vram too). However, while the QXLCursorCmd memory is pinned, the QXLCursor memory is not. When booting a recent Fedora to its login screen while monitoring the QXLCursorCmd QEMU holds, it's possible to see the QXLCursor memory becoming invalid shortly after boot. Pinning that memory ensures that that QXLCursor memory is not going to be moved by the guest kernel. Moving the pin/unpin to qxl_release_list_add()/qxl_release_free_list() would be a more generic fix. However, doing this quickly exhausts QXL video memory, so more fixing would be needed before this is workable. Signed-off-by:
Christophe Fergeau <cfergeau@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20181120162004.22807-3-cfergeau@redhat.comSigned-off-by:
-
Christophe Fergeau authored
The 'domain' argument to qxl_bo_pin is redundant with 'bo', and 'gpu_addr' is unused, so we can remove both. Signed-off-by:
-
Christophe Fergeau authored
qxl_bo_unref() is already performing a NULL check. Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/cirrus/cirrus_fbdev.c: In function 'cirrusfb_create': drivers/gpu/drm/cirrus/cirrus_fbdev.c:172:20: warning: variable 'bo' set but not used [-Wunused-but-set-variable] It never used since introduction in commit f9aa76a8 ("drm/kms: driver for virtual cirrus under qemu") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: http://patchwork.freedesktop.org/patch/msgid/1542283836-152176-1-git-send-email-yuehaibing@huawei.comSigned-off-by:
-
- 20 Nov, 2018 8 commits
-
-
Stanislav Lisovskiy authored
v5: This is YUV444 packed format same as AYUV, but without alpha, as supported by i915. v6: Removed unneeded initializer for new XYUV format. v7: Added is_yuv field initialization according to latest drm_fourcc format structure initialization changes. v8: Edited commit message to be more clear about skl+, renamed PLANE_CTL_FORMAT_AYUV to PLANE_CTL_FORMAT_XYUV as this format doesn't support per-pixel alpha. Fixed minor code issues. v9: Moved DRM format check to proper place in intel_framebuffer_init. v10: Changed DRM_FORMAT_XYUV to be DRM_FORMAT_XYUV8888 v11: Fixed rebase conflict, caused by added new formats to drm-tip meanwhile. Reviewed-by:Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> [vsyrjala: Removed stray tab and sorted the formats differently] Signed-off-by:
-
Noralf Trønnes authored
The CMA helper now has the functionality to ensure a virtual address on imported buffer so use that. While touching all tinydrm drivers, remove the unnecessary inclusion of drm_fb_helper.h in some drivers. Cc: David Lechner <david@lechnology.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181110145647.17580-6-noralf@tronnes.org
-
Noralf Trønnes authored
This adds functionality to the CMA helper which ensures that the kernel virtual address is set on the CMA GEM object also for imported buffers. The drivers have been audited to ensure that none set ->vaddr on imported buffers, making the conditional dma_buf_vunmap() call in drm_gem_cma_free_object() safe. Signed-off-by:
-
Noralf Trønnes authored
This adds an optional function table on GEM objects. The main benefit is for drivers that support more than one type of memory (shmem,vram,cma) for their buffers depending on the hardware it runs on. With the callbacks attached to the GEM object itself, it is easier to have core helpers for the the various buffer types. The driver only has to make the decision about buffer type on GEM object creation and all other callbacks can be handled by the chosen helper. drm_driver->gem_prime_res_obj has not been added since there's a todo to put a reservation_object into drm_gem_object. v3: Add todo entry v2: Drop drm_gem_object_funcs->prime_mmap in favour of drm_gem_prime_mmap() (Daniel Vetter) v1: - drm_gem_object_funcs.map -> .prime_map let it only do PRIME mmap like the function it superseeds (Daniel Vetter) - Flip around the if ladders and make obj->funcs the first choice highlighting the fact that this the new default way of doing it (Daniel Vetter) Signed-off-by:
-
Noralf Trønnes authored
Add a generic PRIME GEM mmap function. v2: Fix link in docs (Daniel Vetter) Suggested-by:
-
Noralf Trønnes authored
The majority of drivers use drm_gem_prime_export() and drm_gem_prime_import() for these callbacks so let's make them the default. Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in DRM_DEV_ERROR error message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Fabrizio Castro authored
kbuild test robot reports: >> ERROR: "i2c_mux_add_adapter" [drivers/gpu/drm/bridge/sii902x.ko] undefined! >> ERROR: "i2c_mux_alloc" [drivers/gpu/drm/bridge/sii902x.ko] undefined! >> ERROR: "i2c_mux_del_adapters" [drivers/gpu/drm/bridge/sii902x.ko] undefined! Quite obviously the driver depends on I2C_MUX, but adding a "depends on" introduces a recursive dependency, therefore this patch selects I2C_MUX instead. Fixes: 21d80840 ("drm/bridge/sii902x: Fix EDID readback") Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Link: https://lists.01.org/pipermail/kbuild-all/2018-November/054924.htmlAcked-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
- 19 Nov, 2018 1 commit
-
-
Damian Kos authored
Some of the functions (like cdn_dp_dpcd_read, cdn_dp_get_edid_block) allow to read 64KiB, but the cdn_dp_mailbox_read_receive, that is used by them, can read only up to 255 bytes at once. Normally, it's not a big issue as DPCD or EDID reads won't (hopefully) exceed that value. The real issue here is the revocation list read during the HDCP authentication process. (problematic use case: https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.4/drivers/gpu/drm/rockchip/cdn-dp-reg.c#1152) The list can reach 127*5+4 bytes (num devs * 5 bytes per ID/Bksv + 4 bytes of an additional info). In other words - CTSes with HDCP Repeater won't pass without this fix. Oh, and the driver will most likely stop working (best case scenario). Signed-off-by:
Damian Kos <dkos@cadence.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1541518625-25984-1-git-send-email-dkos@cadence.com
-
- 15 Nov, 2018 3 commits
-
-
Fabrizio Castro authored
While adding SiI9022A support to the iwg23s board, it came up that when the HDMI transmitter is in pass through mode the device is not compliant with the I2C specification anymore, as it requires a far bigger tbuf, due to a delay the HDMI transmitter is adding when relaying the STOP condition on the monitor i2c side of things. When not providing an appropriate delay after the STOP condition the i2c bus would get stuck. Also, any other traffic on the bus while talking to the monitor may cause the transaction to fail or even cause issues with the i2c bus as well. I2c-gates seemed to reach consent as a possible way to address these issues, and as such this patch is implementing a solution based on that. Since others are clearly relying on the current implementation of the driver, this patch won't require any DT changes. Since we don't want any interference during the DDC Bus Request/Grant procedure and while talking to the monitor, we have to use the adapter locking primitives rather than the i2c-mux locking primitives. Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Signed-off-by:
-
Linus Walleij authored
The TPO TPG110 bindings were using the DPI bindings (popular in the fbdev subsystem) but this misses the finer points learned in the DRM subsystem. We need to augment the bindings for proper DRM integration: the timings are expressed by the hardware, not put into the device tree. I.e. this hardware is self-describing and can report the resolutions and timings needed. It should not be described in the device tree. Further the device was incorrectly modeled with GPIO lines instead of an SPI child, even though the device was using SPI. No known deployments of the device using device tree exist, so it should be fine to augment the bindings. Cc: devicetree@vger.kernel.org Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Gabriel Krisman Bertazi authored
I just got a new GDP Win2 device with an updated firmware, which still requires this quirk to get the rotation right, so add the new firmware date to the quirk matching table. This should go to drm-misc-next. Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
- 14 Nov, 2018 4 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/qxl/qxl_release.c: In function 'qxl_release_fence_buffer_objects': drivers/gpu/drm/qxl/qxl_release.c:431:17: warning: variable 'qbo' set but not used [-Wunused-but-set-variable] drivers/gpu/drm/qxl/qxl_release.c:430:24: warning: variable 'driver' set but not used [-Wunused-but-set-variable] 'qbo' not used since commit f2c24b83 ("drm/ttm: flip the switch, and convert to dma_fence") And 'driver' never used since introduction in 8002db63 ("qxl: convert qxl driver to proper use for reservations") Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/qxl/qxl_object.c: In function 'qxl_bo_kunmap_atomic_page': drivers/gpu/drm/qxl/qxl_object.c:189:21: warning: variable 'map' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
The allocation for vfpriv is being leaked on an error return path, fix this by kfree'ing it before returning. Detected by CoverityScan, CID#1475380 ("Resource Leak") Fixes: 6a37c49a ("drm/virtio: Handle context ID allocation errors") Signed-off-by: -
Gustavo Padovan authored
To reflect the (backward compatible) changes in the uabi we are bumping the driver's version. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co> Signed-off-by:
Robert Foss <robert.foss@collabora.com> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-5-robert.foss@collabora.comSigned-off-by:
-
