On ACPI boards, when we cannot get the GPIOs to do a reset ourselves
if necessary, call acpi_device_fix_up_power() to force the ACPI _PS0
method to run.

On some devices without proper GPIO descriptions this will reset
the touchscreen for us and this may be necessary for us to be able
to communicate to the touchscreen at all.

Specifically on an Aya Neo Next this change will cause the _PS0()
ACPI function to call INIT() which does:

            Method (INIT, 0, Serialized)
            {
                TP_I = 0x00A50000
                TP_R = 0x00A50000
                Sleep (0x0A)
                TP_I = 0x00E50000
                Sleep (One)
                TP_R = 0x00E50000
                Sleep (0x06)
                TP_I = 0x00A50000
                Sleep (0x3C)
                TP_I = 0x00041800
            }

On older kernels the ACPI core assumed a power-on was necessary by itself
and would run _PS0 before our probe function runs, which can be seen from
the GPIO pin ctrl registers in /sys/kernel/debug/gpio which match
the above hex values with older kernels.

With newer kernels before this change the GPIO pin ctrl registers do not
match, indicating INIT() has not run and probing the touchscreen fails.

This change makes Linux run _PS0() again fixing the touchscreen not working
on the Aya Neo Next.
Reported-and-tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220618210233.208027-1-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

wm97xx_remove() returns zero unconditionally. To prepare changing the
prototype for platform remove callbacks to return void, make it explicit
that wm97xx_mfd_remove() always returns zero.

The prototype for wm97xx_remove cannot be changed, as it's also used as
a plain device remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220708062718.240013-1-u.kleine-koenig@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add a sanity check on the device id-table driver_info field to make sure
we never access a type structure (and function pointers) outside of the
device info array (e.g. if someone fails to ifdef a device-id entry).

Note that this also suppresses a compiler warning with -Warray-bounds
(gcc-11.3.0) when compile-testing the driver without enabling any of
the device type Kconfig options:

    drivers/input/touchscreen/usbtouchscreen.c: In function 'usbtouch_probe':
    drivers/input/touchscreen/usbtouchscreen.c:1668:16:warning: array subscript <unknown> is outside array bounds of 'struct usbtouch_device_info[0]' [-Warray-bounds]
     1668 |         type = &usbtouch_dev_info[id->driver_info];
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220623062446.16944-1-johan@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Commit 223f61b8 ("Input: soc_button_array - add Lenovo Yoga Tablet2
1051L to the dmi_use_low_level_irq list") added the 1051L to this list
already, but the same problem applies to the 1051F. As there are no
further 1051 variants (just the F/L), we can just DMI match 1051.

Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the
home-button stops working after a wakeup from suspend.
Signed-off-by: Marius Hoch <mail@mariushoch.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220603120246.3065-1-mail@mariushoch.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The bcm5974 driver does the allocation and dma mapping of the usb urb
data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag
to let usb core know the buffer is already mapped.

usb core tries to map the already mapped buffer, causing a warning:
"xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory"

Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core
know buffer is already mapped by bcm5974 driver
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890
Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Since JOYSTICK_SENSEHAT selects MFD_SIMPLE_MFD_I2C and the latter
depends on HAS_IOMEM, and since 'select' does not follow any
dependency chains, JOYSTICK_SENSEHAT should also depend on HAS_IOMEM
to prevent a kconfig warning and a build error:

WARNING: unmet direct dependencies detected for MFD_SIMPLE_MFD_I2C
  Depends on [n]: HAS_IOMEM [=n] && I2C [=y]
  Selected by [y]:
  - JOYSTICK_SENSEHAT [=y] && INPUT_JOYSTICK [=y] && INPUT [=y] && I2C [=y]

s390-linux-ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_probe':
simple-mfd-i2c.c:(.text+0xc8): undefined reference to `devm_mfd_add_devices'

Fixes: 41657514 ("Input: add Raspberry Pi Sense HAT joystick driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220531022942.16340-1-rdunlap@infradead.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Prepare input updates for 5.19 merge window.

The commit 26623eea attempted to deal with potential leak of runtime
PM counter when opening the touchscreen device, however it ended up
erroneously dropping the counter in the case of successfully enabling the
device.

Let's address this by using pm_runtime_resume_and_get() and then executing
pm_runtime_put_sync() only when we fail to send "sense on" command to the
device.

Fixes: 26623eea ("Input: stmfts - fix reference leak in stmfts_input_open")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

gpio_keys module can either accept gpios or interrupts. The module
initializes delayed work in case of gpios only and is only used if
debounce timer is not used, so make sure cancel_delayed_work_sync()
is called only when its gpio-backed and debounce_use_hrtimer is false.

This fixes the issue seen below when the gpio_keys module is unloaded and
an interrupt pin is used instead of GPIO:

[  360.297569] ------------[ cut here ]------------
[  360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470
[  360.310531] Modules linked in: gpio_keys(-)
[  360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166
[  360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT)
[  360.331270] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  360.338318] pc : __flush_work+0x414/0x470
[  360.342385] lr : __cancel_work_timer+0x140/0x1b0
[  360.347065] sp : ffff80000a7fba00
[  360.350423] x29: ffff80000a7fba00 x28: ffff000012b9c5c0 x27: 0000000000000000
[  360.357664] x26: ffff80000a7fbb80 x25: ffff80000954d0a8 x24: 0000000000000001
[  360.364904] x23: ffff800009757000 x22: 0000000000000000 x21: ffff80000919b000
[  360.372143] x20: ffff00000f5974e0 x19: ffff00000f5974e0 x18: ffff8000097fcf48
[  360.379382] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000053f40
[  360.386622] x14: ffff800009850e88 x13: 0000000000000002 x12: 000000000000a60c
[  360.393861] x11: 000000000000a610 x10: 0000000000000000 x9 : 0000000000000008
[  360.401100] x8 : 0101010101010101 x7 : 00000000a473c394 x6 : 0080808080808080
[  360.408339] x5 : 0000000000000001 x4 : 0000000000000000 x3 : ffff80000919b458
[  360.415578] x2 : ffff8000097577f0 x1 : 0000000000000001 x0 : 0000000000000000
[  360.422818] Call trace:
[  360.425299]  __flush_work+0x414/0x470
[  360.429012]  __cancel_work_timer+0x140/0x1b0
[  360.433340]  cancel_delayed_work_sync+0x10/0x18
[  360.437931]  gpio_keys_quiesce_key+0x28/0x58 [gpio_keys]
[  360.443327]  devm_action_release+0x10/0x18
[  360.447481]  release_nodes+0x8c/0x1a0
[  360.451194]  devres_release_all+0x90/0x100
[  360.455346]  device_unbind_cleanup+0x14/0x60
[  360.459677]  device_release_driver_internal+0xe8/0x168
[  360.464883]  driver_detach+0x4c/0x90
[  360.468509]  bus_remove_driver+0x54/0xb0
[  360.472485]  driver_unregister+0x2c/0x58
[  360.476462]  platform_driver_unregister+0x10/0x18
[  360.481230]  gpio_keys_exit+0x14/0x828 [gpio_keys]
[  360.486088]  __arm64_sys_delete_module+0x1e0/0x270
[  360.490945]  invoke_syscall+0x40/0xf8
[  360.494661]  el0_svc_common.constprop.3+0xf0/0x110
[  360.499515]  do_el0_svc+0x20/0x78
[  360.502877]  el0_svc+0x48/0xf8
[  360.505977]  el0t_64_sync_handler+0x88/0xb0
[  360.510216]  el0t_64_sync+0x148/0x14c
[  360.513930] irq event stamp: 4306
[  360.517288] hardirqs last  enabled at (4305): [<ffff8000080b0300>] __cancel_work_timer+0x130/0x1b0
[  360.526359] hardirqs last disabled at (4306): [<ffff800008d194fc>] el1_dbg+0x24/0x88
[  360.534204] softirqs last  enabled at (4278): [<ffff8000080104a0>] _stext+0x4a0/0x5e0
[  360.542133] softirqs last disabled at (4267): [<ffff8000080932ac>] irq_exit_rcu+0x18c/0x1b0
[  360.550591] ---[ end trace 0000000000000000 ]---
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220524135822.14764-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220521111145.81697-27-Julia.Lawall@inria.frSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge changes to ChromeOS EC Keyboard driver.

Currently, when trying to suspend and resume with VirtualPS/2 VMMouse
there is an error message after resuming:

	psmouse serio1: vmmouse: Unable to re-enable mouse when reconnecting, err: -6

and the mouse will no longer be operable, requiring full rescan to find a
another driver to use for the port.

This error is due to QEMU still generating PS2 events which the kernel is
not consuming until resume time, where they interfere with mouse
identification and ultimately resulting in an error getting
VMMOUSE_VERSION_ID.

Test scenario:

1) start virtual machine with qemu command "vmport=on"
2) click suspend botton to enter suspend mode
3) resume and observe the error message in the kernel logs

Let's fix this by disabling the vmmouse in its reset handler. This will
notify qemu to stop vmmouse and remove the handler.

Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://lore.kernel.org/r/20220322021046.1087954-1-zhouzongmin@kylinos.cnSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This uses anyOf which is wrong. Use oneOf and move the items under the
description. Also drop allOf for $ref.
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/CAE-0n50KE9bkqZvCOLtCGiq3g1jYhK7zpVcVFBzinaguNhNaPw@mail.gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Rename ili251x_hardware_reset() to ili210x_hardware_reset(), change its
parameter from struct device * to struct gpio_desc *, and use it as one
single consistent reset implementation all over the driver. Also increase
the minimum reset duration to 12ms, to make sure the reset is really
within the spec.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220518210423.106555-1-marex@denx.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30
"2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum
10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset
timings such that T4 is 12ms and T2 is 160ms to fit those figures.

This prevents sporadic touch controller start up failures when some
systems with at least ILI251x controller boot, without this patch
the systems sometimes fail to communicate with the touch controller.

Fixes: 201f3c80 ("Input: ili210x - add reset GPIO support")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220518204901.93534-1-marex@denx.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If the device is a detachable (and therefore lacks full keyboard), we may
still want to load this driver because the device might have some other
buttons or switches (e.g. volume and power buttons or a tablet mode
switch). In such case we do not want to register the "main" keyboard device
to allow userspace detect when the detachable keyboard is disconnected and
adjust the system behavior for the tablet mode.

Originally it was suggested to simply skip keyboard registration if row and
columns properties didn't exist, but that approach did not convey the
intent strongly enough and also had a slight problem for migrating existing
DTBs without updating the kernel first, so it was decided to introduce new
google,cros-ec-keyb-switches to explicitly mark devices that only have
axillary buttons and switches.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220516183452.942008-3-swboyd@chromium.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If the ChromeOS board is a detachable, this cros-ec-keyb device won't
have a matrix keyboard but it may have some button switches, e.g. volume
buttons and power buttons. The driver still registers a keyboard though
and that leads to userspace confusion around where the keyboard is.

We tried to work around this by only registering the keyboard device when
rows/columns properties were specified for the device, but that led to
another problem where removing the rows/columns properties breaks the
existing binding. Technically before that commit the rows/columns
properties were required, otherwise the driver would fail to probe.
Removing the properties from devicetrees makes the driver fail to probe
unless the corresponding driver patch is present. Furthermore, this makes
requiring matrix keyboard properties for devices that really have a
keyboard impossible because the compatible drives the schema and now the
properties are optional.

Add a more specific compatible for this type of device that indicates to
the OS that there are only switches and no matrix keyboard present.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220516183452.942008-2-swboyd@chromium.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Flushing system-wide workqueues is dangerous and will be forbidden.
Replace system_wq with local psmouse_wq.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/25e2b787-cb2c-fb0d-d62c-6577ad1cd9df@I-love.SAKURA.ne.jpSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

clk_disable_unprepare() already checks NULL by using IS_ERR_OR_NULL.
Remove unneeded NULL check for kp->clk.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20220516085511.10679-1-wanjiabing@vivo.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

of_find_node_by_path() calls of_find_node_opts_by_path(),
which returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: 9c1a5077 ("input: Rewrite sparcspkr device probing.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220516081018.42728-1-linmq006@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This LRADC variant uses the same 3/4*AVCC reference voltage as the A83T
variant. The R329 and D1 LRADCs appear to be identical, so D1 support is
accomplished through having the R329 LRADC as a fallback compatible.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220414002349.24332-3-samuel@sholland.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Until the R329, the LRADC hardware was always active. Now it requires
enabling a clock gate and deasserting a reset line. Add support for this
variant of the hardware.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220414002349.24332-2-samuel@sholland.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The R329 and D1 SoCs each contain an LRADC with a programming interface
compatible to earlier LRADCs. However, the LRADC now has its own clock
gate and reset line, instead of being always active.

To support this, add clock/reset properties to the binding, and require
them for the variant in the new SoCs.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220414002349.24332-1-samuel@sholland.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Fengping has no longer interest and time to maintain this driver so he
agreed to transfer maintainership over to me.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220421140255.2781505-1-mkorpershoek@baylibre.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Allow the driver to wake the system on key press if the "wakeup-source"
property is provided in the device tree. Using the LRADC as a wakeup
source requires keeping the AVCC domain active during sleep. Since this
has a nontrivial impact on power consumption (sometimes doubling it),
disable the LRADC wakeup source by default.
Signed-off-by: Ondrej Jirman <x@xff.cz>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220424161328.61103-1-samuel@sholland.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The status of the keys connected to the KPDPWR_N and RESIN_N pins
is identified by reading corresponding bits in the interrupt real
time status register.  If the status has changed by the time that
the interrupt is handled then a press event will be missed.

Maintain a last known status variable to find unbalanced release
events and simulate press events for each accordingly.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Link: https://lore.kernel.org/r/20220422191239.6271-6-quic_amelende@quicinc.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

On certain PMICs, an unexpected assertion of KPDPWR_DEB (the
positive logic hardware debounced power key signal) may be seen
during the falling edge of KPDPWR_N (i.e. a power key press) when
it occurs close to the rising edge of SLEEP_CLK.  This then
triggers a spurious KPDPWR interrupt.

Handle this issue by adding software debouncing support to ignore
key events that occur within the hardware debounce delay after the
most recent key release event.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Link: https://lore.kernel.org/r/20220422191239.6271-5-quic_amelende@quicinc.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Currently, PON address is read from the "reg" property. For PON GEN3,
which starts with PMK8350, the "reg" property will have both the PON
HLOS and PON PBS addesses defined. Add support so that all PON
generations can be configured.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Link: https://lore.kernel.org/r/20220422191239.6271-4-quic_amelende@quicinc.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Currently, error message reads "failed to set debounce". However,
code is attempting to read revision not set debounce. Fix this.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Link: https://lore.kernel.org/r/20220422191239.6271-3-quic_amelende@quicinc.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

All work currently pending will be done first by calling destroy_workqueue,
so there is unnecessary to flush it explicitly.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Link: https://lore.kernel.org/r/20220422093304.2781183-1-ran.jianping@zte.com.cnSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately. This
makes the code simpler without functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20220418015036.2556731-1-lv.ruyi@zte.com.cnSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds the driver for the Sense HAT joystick. It outputs BTN_DPAD
key events when moved in any of the four directions and the BTN_SELECT
event when depressed.
Co-developed-by: Daniel Bauman <dbauman@redhat.com>
Signed-off-by: Daniel Bauman <dbauman@redhat.com>
Co-developed-by: Mwesigwa Guma <mguma@redhat.com>
Signed-off-by: Mwesigwa Guma <mguma@redhat.com>
Co-developed-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Link: https://lore.kernel.org/r/20220419205158.28088-3-cmirabil@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Since version 5.13, the standard syscon bindings have been added
to all clps711x DT nodes, so we can now use the more general
syscon_regmap_lookup_by_phandle function to get the syscon pointer.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Link: https://lore.kernel.org/r/20220420062725.25614-1-eagle.alexander923@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Remove unneeded variable used to store return value.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Link: https://lore.kernel.org/r/20220419064255.2563333-1-deng.changcheng@zte.com.cnSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Variable ret is being assigned a value that is never read, it is
being re-assigned again in either path of the if statement. The
assignment is redundant and can be removed.

Cleans up clang scan build warning:
Although the value stored to 'ret' is used in the enclosing expression,
the value is never actually read from 'ret' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220418142457.84708-1-colin.i.king@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Select callers of iqs7222_parse_props() do not expect a child node
to be derived and returned via pointer. As such, these callers set
**child_node to NULL. However, this pointer is dereferenced in all
cases.

To solve this problem, dereference the pointer only for cases that
expect a child node in the first place. In these cases, the caller
provides a valid pointer.

Fixes: e505edae ("Input: add support for Azoteq IQS7222A/B/C")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220417214132.497487-1-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If fwnode_property_count_u32() returns a negative error code then,
because of type promotion, the "count > ARRAY_SIZE(pins)" condition
will be true.  The negative "count" is type promoted to a high unsigned
size_t value.

That means the "else if (count < 0)" condition will always be false and
we don't print that error message or propagate the error code from
fwnode_property_count_u32() as intended.

Fix this by re-ordering the checks so that we check for negative first.

Fixes: e505edae ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220412153954.GA15406@kiliSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add keycodes that are used by marine navigation devices.
Signed-off-by: Shelby Heffron <Shelby.Heffron@garmin.com>
Link: https://lore.kernel.org/r/20220414015356.1619310-1-Shelby.Heffron@garmin.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.

Fixes: f77621cc ("Input: omap-keypad - dynamically handle register offsets")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220412070131.19848-1-linmq006@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When the driver fails to probe, we will get the following splat:

[   19.311970] ------------[ cut here ]------------
[   19.312566] WARNING: CPU: 3 PID: 375 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   19.317591] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   19.328831] Call Trace:
[   19.329112]  <TASK>
[   19.329369]  regulator_bulk_free+0x82/0xe0
[   19.329860]  devres_release_group+0x319/0x3d0
[   19.330357]  i2c_device_probe+0x766/0x940

Fix this by adding a callback that will deal with the disabling when the
driver fails to probe.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220409022629.3493557-1-zheyuma97@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>