- 07 May, 2018 16 commits
-
-
Wanpeng Li authored
BugLink: http://bugs.launchpad.net/bugs/1756866 commit efdab992 upstream. syzkaller reported: WARNING: CPU: 0 PID: 12927 at arch/x86/kernel/traps.c:780 do_debug+0x222/0x250 CPU: 0 PID: 12927 Comm: syz-executor Tainted: G OE 4.15.0-rc2+ #16 RIP: 0010:do_debug+0x222/0x250 Call Trace: <#DB> debug+0x3e/0x70 RIP: 0010:copy_user_enhanced_fast_string+0x10/0x20 </#DB> _copy_from_user+0x5b/0x90 SyS_timer_create+0x33/0x80 entry_SYSCALL_64_fastpath+0x23/0x9a The testcase sets a watchpoint (with perf_event_open) on a buffer that is passed to timer_create() as the struct sigevent argument. In timer_create(), copy_from_user()'s rep movsb triggers the BP. The testcase also sets the debug registers for the guest. However, KVM only restores host debug registers when the host has active watchpoints, which triggers a race condition when running the testcase with multiple threads. The guest's DR6.BS bit can escape to the host before another thread invokes timer_create(), and do_debug() complains. The fix is to respect do_debug()'s dr6 invariant when leaving KVM. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Eric Biggers authored
BugLink: http://bugs.launchpad.net/bugs/1756866 commit d8c7fe9f upstream. Using %rbp as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. In twofish-3way, we can't simply replace %rbp with another register because there are none available. Instead, we use the stack to hold the values that %rbp, %r11, and %r12 were holding previously. Each of these values represents the half of the output from the previous Feistel round that is being passed on unchanged to the following round. They are only used once per round, when they are exchanged with %rax, %rbx, and %rcx. As a result, we free up 3 registers (one per block) and can reassign them so that %rbp is not used, and additionally %r14 and %r15 are not used so they do not need to be saved/restored. There may be a small overhead caused by replacing 'xchg REG, REG' with the needed sequence 'mov MEM, REG; mov REG, MEM; mov REG, REG' once per round. But, counterintuitively, when I tested "ctr-twofish-3way" on a Haswell processor, the new version was actually about 2% faster. (Perhaps 'xchg' is not as well optimized as plain moves.) Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Paul Moore authored
BugLink: http://bugs.launchpad.net/bugs/1756866 commit 4b14752e upstream. We can't do anything reasonable in security_bounded_transition() if we don't have a policy loaded, and in fact we could run into problems with some of the code inside expecting a policy. Fix these problems like we do many others in security/selinux/ss/services.c by checking to see if the policy is loaded (ss_initialized) and returning quickly if it isn't. Reported-by:
syzbot <syzkaller-bugs@googlegroups.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Reviewed-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Paul Moore authored
BugLink: http://bugs.launchpad.net/bugs/1756866 commit ef28df55 upstream. The syzbot/syzkaller automated tests found a problem in security_context_to_sid_core() during early boot (before we load the SELinux policy) where we could potentially feed context strings without NUL terminators into the strcmp() function. We already guard against this during normal operation (after the SELinux policy has been loaded) by making a copy of the context strings and explicitly adding a NUL terminator to the end. The patch extends this protection to the early boot case (no loaded policy) by moving the context copy earlier in security_context_to_sid_core(). Reported-by:
William Roberts <william.c.roberts@intel.com> Signed-off-by:
-
David Howells authored
BugLink: http://bugs.launchpad.net/bugs/1756866 commit f3515741 upstream. Provide a function, kmemdup_nul(), that will create a NUL-terminated string from an unterminated character array where the length is known in advance. This is better than kstrndup() in situations where we already know the string length as the strnlen() in kstrndup() is superfluous. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Chris Wilson authored
BugLink: http://bugs.launchpad.net/bugs/1756866 commit d18d1a5a upstream. To acquire all modeset locks requires a ww_ctx to be allocated. As this is the legacy path and the allocation small, to reduce the changes required (and complex untested error handling) to the legacy drivers, we simply assume that the allocation succeeds. At present, it relies on the too-small-to-fail rule, but syzbot found that by injecting a failure here we would hit the WARN. Document that this allocation must succeed with __GFP_NOFAIL. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171031115535.15166-1-chris@chris-wilson.co.ukSigned-off-by:
-
Jens Axboe authored
BugLink: http://bugs.launchpad.net/bugs/1756866 commit a6da0024 upstream. We need to ensure that tracepoints are registered and unregistered with the users of them. The existing atomic count isn't enough for that. Add a lock around the tracepoints, so we serialize access to them. This fixes cases where we have multiple users setting up and tearing down tracepoints, like this: CPU: 0 PID: 2995 Comm: syzkaller857118 Not tainted 4.14.0-rc5-next-20171018+ #36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1c4/0x1e0 kernel/panic.c:546 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177 do_trap_no_signal arch/x86/kernel/traps.c:211 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:260 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:tracepoint_add_func kernel/tracepoint.c:210 [inline] RIP: 0010:tracepoint_probe_register_prio+0x397/0x9a0 kernel/tracepoint.c:283 RSP: 0018:ffff8801d1d1f6c0 EFLAGS: 00010293 RAX: ffff8801d22e8540 RBX: 00000000ffffffef RCX: ffffffff81710f07 RDX: 0000000000000000 RSI: ffffffff85b679c0 RDI: ffff8801d5f19818 RBP: ffff8801d1d1f7c8 R08: ffffffff81710c10 R09: 0000000000000004 R10: ffff8801d1d1f6b0 R11: 0000000000000003 R12: ffffffff817597f0 R13: 0000000000000000 R14: 00000000ffffffff R15: ffff8801d1d1f7a0 tracepoint_probe_register+0x2a/0x40 kernel/tracepoint.c:304 register_trace_block_rq_insert include/trace/events/block.h:191 [inline] blk_register_tracepoints+0x1e/0x2f0 kernel/trace/blktrace.c:1043 do_blk_trace_setup+0xa10/0xcf0 kernel/trace/blktrace.c:542 blk_trace_setup+0xbd/0x180 kernel/trace/blktrace.c:564 sg_ioctl+0xc71/0x2d90 drivers/scsi/sg.c:1089 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x444339 RSP: 002b:00007ffe05bb5b18 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006d66c0 RCX: 0000000000444339 RDX: 000000002084cf90 RSI: 00000000c0481273 RDI: 0000000000000009 RBP: 0000000000000082 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffffff R13: 00000000c0481273 R14: 0000000000000000 R15: 0000000000000000 since we can now run these in parallel. Ensure that the exported helpers for doing this are grabbing the queue trace mutex. Reported-by:
Steven Rostedt <rostedt@goodmis.org> Tested-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Cong Wang authored
BugLink: http://bugs.launchpad.net/bugs/1756866 commit 6a53b759 upstream. syzbot reported a kernel warning in xfrm_state_fini(), which indicates that we have entries left in the list net->xfrm.state_all whose proto is zero. And xfrm_id_proto_match() doesn't consider them as a match with IPSEC_PROTO_ANY in this case. Proto with value 0 is probably not a valid value, at least verify_newsa_info() doesn't consider it valid either. This patch fixes it by checking the proto value in validate_tmpl() and rejecting invalid ones, like what iproute2 does in xfrm_xfrmproto_getbyname(). Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Steffen Klassert authored
BugLink: http://bugs.launchpad.net/bugs/1756866 commit ddc47e44 upstream. When we do tunnel or beet mode, we pass saddr and daddr from the template to xfrm_state_find(), this is ok. On transport mode, we pass the addresses from the flowi, assuming that the IP addresses (and address family) don't change during transformation. This assumption is wrong in the IPv4 mapped IPv6 case, packet is IPv4 and template is IPv6. Fix this by catching address family missmatches of the policy and the flow already before we do the lookup. Reported-by:
-
Tetsuo Handa authored
BugLink: http://bugs.launchpad.net/bugs/1756866 commit bb422a73 upstream. Syzbot caught an oops at unregister_shrinker() because combination of commit 1d3d4437 ("vmscan: per-node deferred work") and fault injection made register_shrinker() fail and the caller of register_shrinker() did not check for failure. ---------- [ 554.881422] FAULT_INJECTION: forcing a failure. [ 554.881422] name failslab, interval 1, probability 0, space 0, times 0 [ 554.881438] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82 [ 554.881443] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 554.881445] Call Trace: [ 554.881459] dump_stack+0x194/0x257 [ 554.881474] ? arch_local_irq_restore+0x53/0x53 [ 554.881486] ? find_held_lock+0x35/0x1d0 [ 554.881507] should_fail+0x8c0/0xa40 [ 554.881522] ? fault_create_debugfs_attr+0x1f0/0x1f0 [ 554.881537] ? check_noncircular+0x20/0x20 [ 554.881546] ? find_next_zero_bit+0x2c/0x40 [ 554.881560] ? ida_get_new_above+0x421/0x9d0 [ 554.881577] ? find_held_lock+0x35/0x1d0 [ 554.881594] ? __lock_is_held+0xb6/0x140 [ 554.881628] ? check_same_owner+0x320/0x320 [ 554.881634] ? lock_downgrade+0x990/0x990 [ 554.881649] ? find_held_lock+0x35/0x1d0 [ 554.881672] should_failslab+0xec/0x120 [ 554.881684] __kmalloc+0x63/0x760 [ 554.881692] ? lock_downgrade+0x990/0x990 [ 554.881712] ? register_shrinker+0x10e/0x2d0 [ 554.881721] ? trace_event_raw_event_module_request+0x320/0x320 [ 554.881737] register_shrinker+0x10e/0x2d0 [ 554.881747] ? prepare_kswapd_sleep+0x1f0/0x1f0 [ 554.881755] ? _down_write_nest_lock+0x120/0x120 [ 554.881765] ? memcpy+0x45/0x50 [ 554.881785] sget_userns+0xbcd/0xe20 (...snipped...) [ 554.898693] kasan: CONFIG_KASAN_INLINE enabled [ 554.898724] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 554.898732] general protection fault: 0000 [#1] SMP KASAN [ 554.898737] Dumping ftrace buffer: [ 554.898741] (ftrace buffer empty) [ 554.898743] Modules linked in: [ 554.898752] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82 [ 554.898755] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 554.898760] task: ffff8801d1dbe5c0 task.stack: ffff8801c9e38000 [ 554.898772] RIP: 0010:__list_del_entry_valid+0x7e/0x150 [ 554.898775] RSP: 0018:ffff8801c9e3f108 EFLAGS: 00010246 [ 554.898780] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 554.898784] RDX: 0000000000000000 RSI: ffff8801c53c6f98 RDI: ffff8801c53c6fa0 [ 554.898788] RBP: ffff8801c9e3f120 R08: 1ffff100393c7d55 R09: 0000000000000004 [ 554.898791] R10: ffff8801c9e3ef70 R11: 0000000000000000 R12: 0000000000000000 [ 554.898795] R13: dffffc0000000000 R14: 1ffff100393c7e45 R15: ffff8801c53c6f98 [ 554.898800] FS: 0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 [ 554.898804] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 554.898807] CR2: 00000000dbc23000 CR3: 00000001c7269000 CR4: 00000000001406e0 [ 554.898813] DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 [ 554.898816] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 [ 554.898818] Call Trace: [ 554.898828] unregister_shrinker+0x79/0x300 [ 554.898837] ? perf_trace_mm_vmscan_writepage+0x750/0x750 [ 554.898844] ? down_write+0x87/0x120 [ 554.898851] ? deactivate_super+0x139/0x1b0 [ 554.898857] ? down_read+0x150/0x150 [ 554.898864] ? check_same_owner+0x320/0x320 [ 554.898875] deactivate_locked_super+0x64/0xd0 [ 554.898883] deactivate_super+0x141/0x1b0 ---------- Since allowing register_shrinker() callers to call unregister_shrinker() when register_shrinker() failed can simplify error recovery path, this patch makes unregister_shrinker() no-op when register_shrinker() failed. Also, reset shrinker->nr_deferred in case unregister_shrinker() was by error called twice. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Aliaksei Karaliou <akaraliou.dev@gmail.com> Reported-by:
-
Johannes Berg authored
BugLink: http://bugs.launchpad.net/bugs/1756866 commit 59b179b4 upstream. syzbot reported a warning from rfkill_alloc(), and after a while I think that the reason is that it was doing fault injection and the dev_set_name() failed, leaving the name NULL, and we didn't check the return value and got to rfkill_alloc() with a NULL name. Since we really don't want a NULL name, we ought to check the return value. Fixes: fb28ad35 ("net: struct device - replace bus_id with dev_name(), dev_set_name()") Reported-by: syzbot+1ddfb3357e1d7bb5b5d3@syzkaller.appspotmail.com Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Paolo Abeni authored
BugLink: http://bugs.launchpad.net/bugs/1756866 commit 607f725f upstream. This also fix a potential race into the existing tunnel code, which could lead to the wrong dst to be permanenty cached: CPU1: CPU2: <xmit on ip6_tunnel> <cache lookup fails> dst = ip6_route_output(...) <tunnel params are changed via nl> dst_cache_reset() // no effect, // the cache is empty dst_cache_set() // the wrong dst // is permanenty stored // into the cache With the new dst implementation the above race is not possible since the first cache lookup after dst_cache_reset will fail due to the timestamp check Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Manoj Boopathi Raj <manojboopathi@google.com> Signed-off-by:
-
Stefan Bader authored
BugLink: http://bugs.launchpad.net/bugs/1756866 New config option which was added by stable commit: 911362c7 "net: add dst_cache support" Signed-off-by:
-
Paolo Abeni authored
BugLink: http://bugs.launchpad.net/bugs/1756866 commit 911362c7 upstream. This patch add a generic, lockless dst cache implementation. The need for lock is avoided updating the dst cache fields only in per cpu scope, and requiring that the cache manipulation functions are invoked with the local bh disabled. The refresh_ts and reset_ts fields are used to ensure the cache consistency in case of cuncurrent cache update (dst_cache_set*) and reset operation (dst_cache_reset). Consider the following scenario: CPU1: CPU2: <cache lookup with emtpy cache: it fails> <get dst via uncached route lookup> <related configuration changes> dst_cache_reset() dst_cache_set() The dst entry set passed to dst_cache_set() should not be used for later dst cache lookup, because it's obtained using old configuration values. Since the refresh_ts is updated only on dst_cache lookup, the cached value in the above scenario will be discarded on the next lookup. Signed-off-by:
-
Kamal Mostafa authored
BugLink: http://bugs.launchpad.net/bugs/1755627 The ibrs_dump sysctl interface landed in the Ubuntu backport df043b74 ("x86/spec_ctrl: Add sysctl knobs to enable/disable SPEC_CTRL feature") but nothing like it reached mainline. This debug interface spams dmesg with many lines of output each time /proc/sys/kernel/ibrs_dump is accessed (notably, every run of 'sysctl -a') The interface returns only a dummy sysctl value; it has no other purpose aside from generating dmesg output. Remove the interface to squelch the excessive dmesg logging by 'sysctl -a'. Fixes: df043b74 ("x86/spec_ctrl: Add sysctl knobs to enable/disable SPEC_CTRL feature") Acked-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Leann Ogasawara <leann.ogasawara@canonical.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Stefan Bader authored
Ignore: yes Signed-off-by:
-
- 02 May, 2018 5 commits
-
-
Stefan Bader authored
Signed-off-by: -
Andy Lutomirski authored
CVE-2018-8897 There's nothing IST-worthy about #BP/int3. We don't allow kprobes in the small handful of places in the kernel that run at CPL0 with an invalid stack, and 32-bit kernels have used normal interrupt gates for #BP forever. Furthermore, we don't allow kprobes in places that have usergs while in kernel mode, so "paranoid" is also unnecessary. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org (backported from commit d8ba61ba) Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Linus Torvalds authored
CVE-2018-1087 The undocumented 'icebp' instruction (aka 'int1') works pretty much like 'int3' in the absense of in-circuit probing equipment (except, obviously, that it raises #DB instead of raising #BP), and is used by some validation test-suites as such. But Andy Lutomirski noticed that his test suite acted differently in kvm than on bare hardware. The reason is that kvm used an inexact test for the icebp instruction: it just assumed that an all-zero VM exit qualification value meant that the VM exit was due to icebp. That is not unlike the guess that do_debug() does for the actual exception handling case, but it's purely a heuristic, not an absolute rule. do_debug() does it because it wants to ascribe _some_ reasons to the #DB that happened, and an empty %dr6 value means that 'icebp' is the most likely casue and we have no better information. But kvm can just do it right, because unlike the do_debug() case, kvm actually sees the real reason for the #DB in the VM-exit interruption information field. So instead of relying on an inexact heuristic, just use the actual VM exit information that says "it was 'icebp'". Right now the 'icebp' instruction isn't technically documented by Intel, but that will hopefully change. The special "privileged software exception" information _is_ actually mentioned in the Intel SDM, even though the cause of it isn't enumerated. Reported-by:
-
Linus Torvalds authored
CVE-2018-1000199 Annoyingly, modify_user_hw_breakpoint() unnecessarily complicates the modification of a breakpoint - simplify it and remove the pointless local variables. Also update the stale Docbook while at it. Signed-off-by:
Ingo Molnar <mingo@kernel.org> (cherry picked from commit f67b1503) Signed-off-by:
-
Stefan Bader authored
Ignore: yes Signed-off-by:
-
- 23 Apr, 2018 3 commits
-
-
Stefan Bader authored
Signed-off-by: -
Sanjay Kumar Konduri authored
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1757435 We are disabling deep sleep before performing scan. In corner case, it's observed that probe request is downloaded to firmware before receiving deep sleep confirmation which leads to a scan stop issue Race is resolved in this patch by waiting for the confirmation from firmware Signed-off-by:
Sanjay Kumar Konduri <sanjay.konduri@redpinesignals.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Acked-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
-
Stefan Bader authored
Ignore: yes Signed-off-by:
-
- 13 Apr, 2018 2 commits
-
-
Kleber Sacilotto de Souza authored
Signed-off-by: -
Paolo Pisati authored
BugLink: https://bugs.launchpad.net/bugs/1763644Signed-off-by:
Paolo Pisati <paolo.pisati@canonical.com> Acked-by:
-
- 12 Apr, 2018 1 commit
-
-
Kamal Mostafa authored
Ignore: yes Signed-off-by:
-
- 05 Apr, 2018 5 commits
-
-
Kleber Sacilotto de Souza authored
Signed-off-by: -
Tim Chen authored
BugLink: https://bugs.launchpad.net/bugs/1759920 CVE-2017-5715 (Spectre v2 Intel) Flush indirect branches when switching into a process that marked itself non dumpable. This protects high value processes like gpg better, without having too high performance overhead. If done naïvely, we could switch to a kernel idle thread and then back to the original process, such as: process A -> idle -> process A In such scenario, we do not have to do IBPB here even though the process is non-dumpable, as we are switching back to the same process after a hiatus. To avoid the redundant IBPB, which is expensive, we track the last mm user context ID. The cost is to have an extra u64 mm context id to track the last mm we were using before switching to the init_mm used by idle. Avoiding the extra IBPB is probably worth the extra memory for this common scenario. For those cases where tlb_defer_switch_to_init_mm() returns true (non PCID), lazy tlb will defer switch to init_mm, so we will not be changing the mm for the process A -> idle -> process A switch. So IBPB will be skipped for this case. Thanks to the reviewers and Andy Lutomirski for the suggestion of using ctx_id which got rid of the problem of mm pointer recycling. Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
Tyler Hicks authored
BugLink: https://bugs.launchpad.net/bugs/1759920 CVE-2017-5715 (Spectre v2 Intel) This reverts commit 3f21d934. Using a ptrace access check in the middle of a task switch was causing a hard lockup in some cases when the old task was confined by AppArmor. If the AppArmor policy for the the old task didn't allow the task to ptrace the new task, AppArmor would attempt to emit an audit message and deadlock on the task's pi_lock would occur. The fix is to revert this change and go with upstream's implementation that uses the task's dumpable state to determine if IBPB should be used. Signed-off-by:
-
Andy Whitcroft authored
BugLink: http://bugs.launchpad.net/bugs/1760876 Out of tree builds utilise the kernel Makefiles and therefore we need to include all direct dependencies of those Makefiles. Now that we call out to the repoline extractor during builds we must carry the extractor with the headers. Move the extractor to the kernel scripts directory and ensure its name is unique. Signed-off-by:
Andy Whitcroft <apw@canonical.com> Acked-by:
Juerg Haefliger <juerg.haefliger@canonical.com> Acked-by:
-
Seth Forshee authored
With the new support for removing known safe retpoline sequences from the ones which were detected it is now completely valid to end up with an empty retpoline file in the abi. Remove the check for empty retpoline files so this will not cause an error. BugLink: http://bugs.launchpad.net/bugs/1758856Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
- 04 Apr, 2018 8 commits
-
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1756860Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1756860 commit 16c3ada8 upstream. With CONFIG_KASAN, we get an overly long stack frame due to inlining the register access functions: drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7': drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] This is caused by a gcc bug that has now been fixed in gcc-8. To work around the problem, we can pass the register data through a local variable that older gcc versions can optimize out as well. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1756860 commit 5c103719 upstream. The ohci-hcd node has an interrupt number but no interrupt-parent, leading to a warning with current dtc versions: arch/arm/boot/dts/s5pv210-aquila.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-goni.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-smdkc110.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-smdkv210.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-torbreck.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 As seen from the related exynos dts files, the ohci and ehci controllers always share one interrupt number, and the number is the same here as well, so setting the same interrupt-parent is the reasonable solution here. Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1756860 commit 33436478 upstream. Without this tag, we get a build warning: WARNING: modpost: missing MODULE_LICENSE() in arch/arm/mach-pxa/tosa-bt.o For completeness, I'm also adding author and description fields. Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Linus Torvalds authored
BugLink: http://bugs.launchpad.net/bugs/1756860 commit c0eb027e upstream. Normal pathname lookup doesn't allow empty pathnames, but using AT_EMPTY_PATH (with name_to_handle_at() or fstatat(), for example) you can trigger an empty pathname lookup. And not only is the RCU lookup in that case entirely unnecessary (because we'll obviously immediately finalize the end result), it is actively wrong. Why? An empth path is a special case that will return the original 'dirfd' dentry - and that dentry may not actually be RCU-free'd, resulting in a potential use-after-free if we were to initialize the path lazily under the RCU read lock and depend on complete_walk() finalizing the dentry. Found by syzkaller and KASAN. Reported-by:
Vegard Nossum <vegard.nossum@gmail.com> Acked-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1756860 I ran into a 4.9 build warning in randconfig testing, starting with the KAISER patches: arch/x86/kernel/ldt.c: In function 'alloc_ldt_struct': arch/x86/include/asm/pgtable_types.h:208:24: error: large integer implicitly truncated to unsigned type [-Werror=overflow] #define __PAGE_KERNEL (__PAGE_KERNEL_EXEC | _PAGE_NX) ^ arch/x86/kernel/ldt.c:81:6: note: in expansion of macro '__PAGE_KERNEL' __PAGE_KERNEL); ^~~~~~~~~~~~~ I originally ran into this last year when the patches were part of linux-next, and tried to work around it by using the proper 'pteval_t' types consistently, but that caused additional problems. This takes a much simpler approach, and makes the argument type of the dummy helper always 64-bit, which is wide enough for any page table layout and won't hurt since this call is just an empty stub anyway. Fixes: 8f0baadf ("kaiser: merged update") Signed-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
NeilBrown authored
BugLink: http://bugs.launchpad.net/bugs/1756860 commit 8dd601fa upstream. dec_pending() is given an error status (possibly 0) to be recorded against a bio. It can be called several times on the one 'struct dm_io', and it is careful to only assign a non-zero error to io->status. However when it then assigned io->status to bio->bi_status, it is not careful and could overwrite a genuine error status with 0. This can happen when chained bios are in use. If a bio is chained beneath the bio that this dm_io is handling, the child bio might complete and set bio->bi_status before the dm_io completes. This has been possible since chained bios were introduced in 3.14, and has become a lot easier to trigger with commit 18a25da8 ("dm: ensure bio submission follows a depth-first tree walk") as that commit caused dm to start using chained bios itself. A particular failure mode is that if a bio spans an 'error' target and a working target, the 'error' fragment will complete instantly and set the ->bi_status, and the other fragment will normally complete a little later, and will clear ->bi_status. The fix is simply to only assign io_error to bio->bi_status when io_error is not zero. Reported-and-tested-by:
Milan Broz <gmazyland@gmail.com> Cc: stable@vger.kernel.org (v3.14+) Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
BugLink: http://bugs.launchpad.net/bugs/1756860 commit 7ac8ff95 upstream. IPv6 doesn't work on the MacchiatoBIN board. It is caused by broken multicast address filter in the mvpp2 driver. The driver loads doesn't load any multicast entries if "allmulti" is not set. This condition should be reversed. The condition !netdev_mc_empty(dev) is useless (because netdev_for_each_mc_addr is nop if the list is empty). This patch also fixes a possible overflow of the multicast list - if mvpp2_prs_mac_da_accept fails, we set the allmulti flag and retry. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
