- 02 Nov, 2022 21 commits
-
-
Anirudh Venkataramanan authored
buffer_info->rxbuf.page accessed in e1000_clean_jumbo_rx_irq() is allocated using GFP_ATOMIC. Pages allocated with GFP_ATOMIC can't come from highmem and so there's no need to kmap() them. Just use page_address(). I don't have access to a 32-bit system so did some limited testing on qemu (qemu-system-i386 -m 4096 -smp 4 -device e1000e) with a 32-bit Debian 11.04 image. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Suggested-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Anirudh Venkataramanan authored
alloc_rx_buf() allocates ps_page->page and buffer_info->page using either GFP_ATOMIC or GFP_KERNEL. Memory allocated with GFP_KERNEL/GFP_ATOMIC can't come from highmem and so there's no need to kmap() them. Just use page_address(). I don't have access to a 32-bit system so did some limited testing on qemu (qemu-system-i386 -m 4096 -smp 4 -device e1000e) with a 32-bit Debian 11.04 image. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Suggested-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Sasha Neftin authored
Add tracepoints to the driver via a new file e1000e_trace.h and some new trace calls added in interesting places in the driver. Add some tracing for s0ix flows to help in a debug of shared resources with the CSME firmware. The idea here is that tracepoints have such low performance cost when disabled that we can leave these in the upstream driver. Performance not affected, and this can be very useful for debugging and adding new trace events to paths in the future. Usage: echo "e1000e_trace:*" > /sys/kernel/debug/tracing/set_event echo 1 > /sys/kernel/debug/tracing/events/e1000e_trace/enable Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Sasha Neftin authored
Add devices IDs for the next LOM generations that will be available on the next Intel Client platforms. This patch provides the initial support for these devices. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Sasha Neftin authored
We have the same LAN controller on different PCH's. Separate MTP board type from an ADP which will allow for specific fixes to be applied for MTP platforms. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
David S. Miller authored
Yoshihiro Shimoda says: ==================== net: ethernet: renesas: Add support for "Ethernet Switch" This patch series is based on next-20221027. Add initial support for Renesas "Ethernet Switch" device of R-Car S4-8. The hardware has features about forwarding for an ethernet switch device. But, for now, it acts as ethernet controllers so that any forwarding offload features are not supported. So, any switchdev header files and DSA framework are not used. Notes that this driver requires some special settings on marvell10g, Especially host mactype and host speed. And, I need further investigation to modify the marvell10g driver for upstream. But, the special settings are applied, this rswitch driver can work correcfly without any changes of this rswitch driver. So, I believe the rswitch driver can go for upstream. Changes from v6: https://lore.kernel.org/all/20221028065458.2417293-1-yoshihiro.shimoda.uh@renesas.com/ - Add Reviewed-by tag in the patch [1/3]. - Fix ordering of initialization because NFS root can start mounting the filesystem before register_netdev() even returns Changes from v5: https://lore.kernel.org/all/20221027134034.2343230-1-yoshihiro.shimoda.uh@renesas.com/ - Add maxItems for the ethernet-port/port/reg property. Changes from v4: https://lore.kernel.org/all/20221019083518.933070-1-yoshihiro.shimoda.uh@renesas.com/ - Rebased on next-20221027. - Drop some unneeded properties on the dt-bindings doc. - Change the subject and commit descriptions on the patch [2/3]. - Use phylink instead of phylib. - Modify struct rswitch_*_desc to remove similar functions ([gs]et_dptr). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshihiro Shimoda authored
Add R-Car Gen4 gPTP support into the rswitch driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshihiro Shimoda authored
Add initial support for Renesas "Ethernet Switch" device of R-Car S4-8. The hardware has features about forwarding for an ethernet switch device. But, for now, it acts as ethernet controllers so that any forwarding offload features are not supported. So, any switchdev header files and DSA framework are not used. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshihiro Shimoda authored
Document Renesas Etherent Switch for R-Car S4-8 (r8a779f0). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Mengyuan Lou says: ==================== net: WangXun txgbe/ngbe ethernet driver This patch series adds support for WangXun NICS, to initialize interface from software to firmware. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mengyuan Lou authored
Initialize ngbe mac/phy type. Check whether the firmware is initialized. Initialize ngbe hw and register netdev. Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiawen Wu authored
Add firmware interaction to get EEPROM information. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiawen Wu authored
Add mailbox commands to interact with firmware. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heng Qi authored
In the current processing logic, when xdp_redirect occurs, it transmits the xdp frame based on napi. If napi of the peer veth is not ready, the veth will drop the packets. This doesn't meet our expectations. In this context, we enable napi of the peer veth automatically when the veth loads the xdp. Then if the veth unloads the xdp, we need to correctly judge whether to disable napi of the peer veth, because the peer veth may have loaded xdp, or even the user has enabled GRO. Signed-off-by: Heng Qi <henqqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Vyukov authored
Add remote KCOV annotations for NFC processing that is done in background threads. This enables efficient coverage-guided fuzzing of the NFC subsystem. The intention is to add annotations to background threads that process skb's that were allocated in syscall context (thus have a KCOV handle associated with the current fuzz test). This includes nci_recv_frame() that is called by the virtual nci driver in the syscall context. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Bongsu Jeon <bongsu.jeon@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shailend Chand authored
Previously, even if just one of the many fragments of a 9k packet required a copy, we'd copy the whole packet into a freshly-allocated 9k-sized linear SKB, and this led to performance issues. By having a pool of pages to copy into, each fragment can be independently handled, leading to a reduced incidence of allocation and copy. Signed-off-by: Shailend Chand <shailend@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shane Parslow authored
Add a new iosm wwan port that connects to the modem rpc interface. This interface provides a configuration channel, and in the case of the 7360, is the only way to configure the modem (as it does not support mbim). The new interface is compatible with existing software, such as open_xdatachannel.py from the xmm7360-pci project [1]. [1] https://github.com/xmm7360/xmm7360-pciSigned-off-by: Shane Parslow <shaneparslow808@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
M Chetan Kumar authored
The Modem Logging (MDL) port provides an interface to collect modem logs for debugging purposes. MDL is supported by the relay interface, and the mtk_t7xx port infrastructure. MDL allows user-space apps to control logging via mbim command and to collect logs via the relay interface, while port infrastructure facilitates communication between the driver and the modem. Signed-off-by: Moises Veleta <moises.veleta@linux.intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Acked-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
M Chetan Kumar authored
Use union inside t7xx_port to group port type specific data members. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
After commits 36a6503f ("tcp: refine tcp_prune_ofo_queue() to not drop all packets") and 72cd43ba ("tcp: free batches of packets in tcp_prune_ofo_queue()") tcp_prune_ofo_queue() drops a fraction of ooo queue, to make room for incoming packet. However it makes no sense to drop packets that are before the incoming packet, in sequence space. In order to recover from packet losses faster, it makes more sense to only drop ooo packets which are after the incoming packet. Tested: packetdrill test: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 setsockopt(3, SOL_SOCKET, SO_RCVBUF, [3800], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 0> +.1 < . 1:1(0) ack 1 win 1024 +0 accept(3, ..., ...) = 4 +.01 < . 200:300(100) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 200:300> +.01 < . 400:500(100) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 400:500 200:300> +.01 < . 600:700(100) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 600:700 400:500 200:300> +.01 < . 800:900(100) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 800:900 600:700 400:500 200:300> +.01 < . 1000:1100(100) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 1000:1100 800:900 600:700 400:500> +.01 < . 1200:1300(100) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 1200:1300 1000:1100 800:900 600:700> // this packet is dropped because we have no room left. +.01 < . 1400:1500(100) ack 1 win 1024 +.01 < . 1:200(199) ack 1 win 1024 // Make sure kernel did not drop 200:300 sequence +0 > . 1:1(0) ack 300 <nop,nop, sack 1200:1300 1000:1100 800:900 600:700> // Make room, since our RCVBUF is very small +0 read(4, ..., 299) = 299 +.01 < . 300:400(100) ack 1 win 1024 +0 > . 1:1(0) ack 500 <nop,nop, sack 1200:1300 1000:1100 800:900 600:700> +.01 < . 500:600(100) ack 1 win 1024 +0 > . 1:1(0) ack 700 <nop,nop, sack 1200:1300 1000:1100 800:900> +0 read(4, ..., 400) = 400 +.01 < . 700:800(100) ack 1 win 1024 +0 > . 1:1(0) ack 900 <nop,nop, sack 1200:1300 1000:1100> +.01 < . 900:1000(100) ack 1 win 1024 +0 > . 1:1(0) ack 1100 <nop,nop, sack 1200:1300> +.01 < . 1100:1200(100) ack 1 win 1024 // This checks that 1200:1300 has not been removed from ooo queue +0 > . 1:1(0) ack 1300 Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20221101035234.3910189-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Dr. David Alan Gilbert authored
inet[46]_pton check the input length against a sane length limit (INET[6]_ADDRSTRLEN), but the strlen value gets truncated due to being stored in an int, so there's a theoretical potential for a >4G string to pass the limit test. Use size_t since that's what strlen actually returns. I've had a hunt for callers that could hit this, but I've not managed to find anything that doesn't get checked with some other limit first; but it's possible that I've missed something in the depth of the storage target paths. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20221029014604.114024-1-linux@treblig.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 01 Nov, 2022 17 commits
-
-
Jakub Kicinski authored
Eric Dumazet says: ==================== inet: add drop monitor support I recently tried to analyse flakes in ip_defrag selftest. This failed miserably. IPv4 and IPv6 reassembly units are causing false kfree_skb() notifications. It is time to deal with this issue. First two patches are changing core networking to better deal with eventual skb frag_list chains, in respect of kfree_skb/consume_skb status. Last three patches are adding three new drop reasons, and make sure skbs that have been reassembled into a large datagram are no longer viewed as dropped ones. After this, understanding why ip_defrag selftest is flaky is possible using standard drop monitoring tools. ==================== Link: https://lore.kernel.org/r/20221029154520.2747444-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
IPv4 reassembly unit can decide to drop frags based on /proc/sys/net/ipv4/ipfrag_max_dist sysctl. Add a specific drop reason to track this specific and weird case. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
Used to track skbs freed after a timeout happened in a reassmbly unit. Passing a @reason argument to inet_frag_rbtree_purge() allows to use correct consumed status for frags that have been successfully re-assembled. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
This is used to track when a duplicate segment received by various reassembly units is dropped. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
When an skb with a frag list is consumed, we currently pretend all skbs in the frag list were dropped. In order to fix this, add a @reason argument to skb_release_data() and skb_release_all(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
This will allow to simply use in the future: kfree_skb_reason(skb, reason); Instead of repeating sequences like: if (dropped) kfree_skb_reason(skb, reason); else consume_skb(skb); For instance, following patch in the series is adding @reason to skb_release_data() and skb_release_all(), so that we can propagate a meaningful @reason whenever consume_skb()/kfree_skb() have to take care of a potential frag_list. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Florian Fainelli authored
RDMA overflows can happen if the Ethernet controller does not have enough bandwidth allocated at the memory controller level, report RDMA overflows and deal with saturation, similar to the RBUF overflow counter. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221028222141.3208429-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Sergei Antonov authored
If the FTMAC100 is used as a DSA master, then it is expected that frames which are MTU sized on the wire facing the external switch port (1500 octets in L2 payload, plus L2 header) also get a DSA tag when seen by the host port. This extra tag increases the length of the packet as the host port sees it, and the FTMAC100 is not prepared to handle frames whose length exceeds 1518 octets (including FCS) at all. Only a minimal rework is needed to support this configuration. Since MTU-sized DSA-tagged frames still fit within a single buffer (RX_BUF_SIZE), we just need to optimize the resource management rather than implement multi buffer RX. In ndo_change_mtu(), we toggle the FTMAC100_MACCR_RX_FTL bit to tell the hardware to drop (or not) frames with an L2 payload length larger than 1500. We need to replicate the MACCR configuration in ftmac100_start_hw() as well, since there is a hardware reset there which clears previous settings. The advantage of dynamically changing FTMAC100_MACCR_RX_FTL is that when dev->mtu is at the default value of 1500, large frames are automatically dropped in hardware and we do not spend CPU cycles dropping them. Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Sergei Antonov <saproj@gmail.com> Link: https://lore.kernel.org/r/20221028183220.155948-3-saproj@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
The driver uses the MAX_PKT_SIZE (1518) for both MTU reporting and for TX. However, the 2 places do not measure the same thing. On TX, skb->len measures the entire L2 packet length (without FCS, which software does not possess). So the comparison against 1518 there is correct. What is not correct is the reporting of dev->max_mtu as 1518. Since MTU measures L2 *payload* length (excluding L2 overhead) and not total L2 packet length, it means that the correct max_mtu supported by this device is the standard 1500. Anything higher than that will be dropped on RX currently. To fix this, subtract VLAN_ETH_HLEN from MAX_PKT_SIZE when reporting the max_mtu, since that is the difference between L2 payload length and total L2 length as seen by software. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Sergei Antonov <saproj@gmail.com> Link: https://lore.kernel.org/r/20221028183220.155948-2-saproj@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
Eliminate one check in the data path and move it elsewhere, to where our real limitation is. We'll want to start processing "too long" frames in the driver (currently there is a hardware MAC setting which drops theses). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Sergei Antonov <saproj@gmail.com> Link: https://lore.kernel.org/r/20221028183220.155948-1-saproj@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Steffen Bätz authored
Currently, the .port_set_rgmii_delay hook is missing for the 88E6320 family, which causes failure to retrieve an IP address via DHCP. Add mv88e6320_port_set_rgmii_delay() that allows applying the RGMII delay for ports 2, 5, and 6, which are the only ports that can be used in RGMII mode. Tested on a custom i.MX8MN board connected to an 88E6320 switch. This change also applies safely to the 88E6321 variant. The only difference between 88E6320 versus 88E6321 is the temperature grade and pinout. They share exactly the same MDIO register map for ports 2, 5, and 6, which are the only ports that can be used in RGMII mode. Signed-off-by: Steffen Bätz <steffen@innosonix.de> [fabio: Improved commit log and extended it to mv88e6321_ops] Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221028163158.198108-1-festevam@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Hangbin Liu says: ==================== rtnetlink: Honour NLM_F_ECHO flag in rtnl_{new, del}link Netlink messages are used for communicating between user and kernel space. When user space configures the kernel with netlink messages, it can set the NLM_F_ECHO flag to request the kernel to send the applied configuration back to the caller. This allows user space to retrieve configuration information that are filled by the kernel (either because these parameters can only be set by the kernel or because user space let the kernel choose a default value). The kernel has support this feature in some places like RTM_{NEW, DEL}ADDR, RTM_{NEW, DEL}ROUTE. This patch set handles NLM_F_ECHO flag and send link info back after rtnl_{new, del}link. ==================== Link: https://lore.kernel.org/r/20221028084224.3509611-1-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hangbin Liu authored
This patch use the new helper unregister_netdevice_many_notify() for rtnl_delete_link(), so that the kernel could reply unicast when userspace set NLM_F_ECHO flag to request the new created interface info. At the same time, the parameters of rtnl_delete_link() need to be updated since we need nlmsghdr and portid info. Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hangbin Liu authored
This patch pass the netlink header message in rtnl_newlink_create() to the new updated rtnl_configure_link(), so that the kernel could reply unicast when userspace set NLM_F_ECHO flag to request the new created interface info. Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hangbin Liu authored
Add new helper unregister_netdevice_many_notify(), pass netlink message header and portid, which could be used to notify userspace when flag NLM_F_ECHO is set. Make the unregister_netdevice_many() as a wrapper of new function unregister_netdevice_many_notify(). Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hangbin Liu authored
This patch pass netlink message header and portid to rtnl_configure_link() All the functions in this call chain need to add the parameters so we can use them in the last call rtnl_notify(), and notify the userspace about the new link info if NLM_F_ECHO flag is set. - rtnl_configure_link() - __dev_notify_flags() - rtmsg_ifinfo() - rtmsg_ifinfo_event() - rtmsg_ifinfo_build_skb() - rtmsg_ifinfo_send() - rtnl_notify() Also move __dev_notify_flags() declaration to net/core/dev.h, as Jakub suggested. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Sean Anderson authored
When this device is deferred, there is often no way to determine what the cause was. Add some debug prints to make it easier to figure out what is blocking the probe. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20221027190005.400839-1-sean.anderson@seco.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 31 Oct, 2022 2 commits
-
-
Colin Ian King authored
Variable i is just being incremented and it's never used anywhere else. The variable and the increment are redundant so remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jacob Keller says: ==================== ptp: convert drivers to .adjfine Many drivers implementing PTP have not yet migrated to the new .adjfine frequency adjustment implementation. A handful of these drivers use hardware with a simple increment value which is adjusted by multiplying by the adjustment factor and then dividing by 1 billion. This calculation is very easy to convert to .adjfine, by simply updating the divisor. Introduce new helper functions, diff_by_scaled_ppm and adjust_by_scaled_ppm which perform the most common calculations used by drivers for this purpose. The adjust_by_scaled_ppm takes the base increment and scaled PPM value, and calculates the new increment to use. A few drivers need the difference and direction rather than a raw increment value. The diff_by_scaled_ppm calculates the difference and returns true if it should be a subtraction, false otherwise. This most closely aligns with existing driver implementations. I previously submitted v1 of this series at [1], and got some feedback only on a handful of drivers. In the interest of merging the changes which have received feedback, I've dropped the following drivers out of this send: * ptp_phc * ptp_ipx46x * tg3 * hclge * stmac * cpts I plan to submit those drivers changes again at a later date. As before, there are some drivers which are not trivial to convert to the new helper functions. While they may be able to work, their implementation is different and I lack the hardware or datasheets to determine what the correct implementation would be. * drivers/net/ethernet/broadcom/bnx2x * drivers/net/ethernet/broadcom/bnxt * drivers/net/ethernet/cavium/liquidio * drivers/net/ethernet/chelsio/cxgb4 * drivers/net/ethernet/freescale * drivers/net/ethernet/qlogic/qed * drivers/net/ethernet/qlogic/qede * drivers/net/ethernet/sfc * drivers/net/ethernet/sfc/siena * drivers/net/ethernet/ti/am65-cpts.c * drivers/ptp/ptp_dte.c My end goal is to drop the .adjfreq implementation entirely, and to that end I plan on modifying these drivers in the future to directly use scaled_ppm_to_ppb as the simplest method to convert them. Changes since v2: * Rebased to allow landing in 6.2 * Added Richard's Acked-by Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Siva Reddy Kallam <siva.kallam@broadcom.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Tariq Toukan <tariqt@nvidia.com> Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Bryan Whitehead <bryan.whitehead@microchip.com> Cc: Sergey Shtylyov <s.shtylyov@omp.ru> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Jose Abreu <joabreu@synopsys.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Vivek Thampi <vithampi@vmware.com> Cc: VMware PV-Drivers Reviewers <pv-drivers@vmware.com> Cc: Jie Wang <wangjie125@huawei.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Guangbin Huang <huangguangbin2@huawei.com> Cc: Eran Ben Elisha <eranbe@nvidia.com> Cc: Aya Levin <ayal@nvidia.com> Cc: Cai Huoqing <cai.huoqing@linux.dev> Cc: Biju Das <biju.das.jz@bp.renesas.com> Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Wan Jiabing <wanjiabing@vivo.com> Cc: Lv Ruyi <lv.ruyi@zte.com.cn> Cc: Arnd Bergmann <arnd@arndb.de> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-