- 27 Jun, 2013 12 commits
-
-
Jaehoon Chung authored
At Interrupt status register, Bit9 is Data Read Timeout. But we used macro name as the DTO. It could be confused with the Data Transfer Over(DTO)-Bit[3]. It's clearly that is changed the DRTO instead of DTO. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Acked-by:
Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
Fabio Estevam authored
Since commit ab78029e (drivers/pinctrl: grab default handles from device core), we can rely on device core for handling pinctrl. So remove devm_pinctrl_get_select_default() from the driver. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Yuvaraj Kumar C D authored
With the new eMMC5.1 spec, there is a new EXT_CSD register with the revision number(EXT_CSD_REV) 7. This patch updates the check for ext-csd.rev number as 7. Signed-off-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Reviewed-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
-
Barry Song authored
With device core now able to setup the default pin configuration, the call to devm_pinctrl_get_select_default can be removed. And the pin configuration code based on the deprecated Samsung specific gpio bindings is also removed. Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Signed-off-by:
-
Simon Baatz authored
Instead of parsing the DT binding on our own, use the standard parser mmc_of_parse(), introduced by commit 6c56e7a0. Signed-off-by:
Simon Baatz <gmbnomis@gmail.com> Tested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Simon Baatz authored
Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
Simon Baatz authored
Signed-off-by:
-
Simon Baatz authored
Signed-off-by:
-
Simon Baatz authored
Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Simon Baatz authored
Signed-off-by:
-
Simon Baatz authored
In addition to just logging errors encountered during DT parsing or allocating GPIO slots for CD/WP, mmc_of_parse() now returns with an error. In particular, this is needed if the GPIO allocation may return EPROBE_DEFER. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Lars-Peter Clausen authored
In preparation to switching the jz4740 clk driver to the common clk framework, update the clk enable/disable calls to clk_prepare_enable/clk_disable_unprepare. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
- 06 Jun, 2013 4 commits
-
-
Guennadi Liakhovetski authored
This fixes two reported problems: 1. after a system resume the controller isn't functioning until a command runs on a timeout and a controller reset is performed. 2. if a card is ejected during a running write operation, its re-insertion isn't detected. Reported-by:
Nguyen Viet Dung <nv-dung@jinso.co.jp> Reported-by:
Nguyen Hong Ky <nh-ky@jinso.co.jp> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Tested-by:
-
Guennadi Liakhovetski authored
With MMC clock gating enabled the MMC core currently calls MMC host driver's .set_ios() method with .power_mode == MMC_POWER_ON and the clock value set either to 0 or to the target rate. The tmio MMC driver then wrongly translates the latter calls to card slot power-on requests, even when the slot already was on. This patch fixes the driver to avoid needlessly incrementing power-supplying regulator's use count. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Masking events on MMCIF means that an occurrence of the masked event won't raise an interrupt, but the event bit will still be set in the interrupt status register. If simultaneously a different event occurs which was enabled, both flags will be set. However, only the unmasked event bit should be cleared in the status register in such a case. Clearing also the masked bit can lead to lost interrupts, which indeed can be observed on the armadillo800eva r8a7740 board with an eMMC chip. The problem has been introduced by the recent "mmc: sh_mmcif: simplify IRQ processing" patch. Fix the problem by only clearing enabled interrupts. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Guennadi Liakhovetski authored
When resuming, the tmio_mmc_host_resume() function is run when the controller might still be powered down. Issuing a reset command to it at that time has no effect. This patch postpones resetting the controller until the first powering-up .set_ios() call. Reported-by:
-
- 31 May, 2013 1 commit
-
-
Christian Daudt authored
Add a param to allow users of sdhci_pltfm to allocate private space in calls to sdhci_pltfm_init+sdhci_pltfm_register. This is implemented in the same way as sdhci does for its users. None of the users have been migrated yet and are passing in zero to retain their private allocation. - todo: migrate clients to using allocation this way - todo: remove priv variable once migration is complete Also removed unused variable in sdhci_pltfm_init fn Signed-off-by:
Christian Daudt <csd@broadcom.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
- 26 May, 2013 23 commits
-
-
Adrian Hunter authored
Add support for runtime PM for BYT SD cards. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Adrian Hunter authored
Enable runtime PM for ACPI HID 80860F14 SD cards, adding support for card detect GPIO. Signed-off-by:
-
Adrian Hunter authored
If card power is dependent on SD bus power then the host controller must not be runtime suspended while the card is powered up. Add the ability to stay runtime-resumed in that case and enable it with a new quirk SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Acked-by:
Sonic Zhang <sonic.zhang@analog.com> Acked-by:
Shawn Guo <shawn.guo@linaro.org> Acked-by:
Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Tony Prisk <linux@prisktech.co.nz> Signed-off-by:
-
Al Cooper authored
Signed-off-by:
Al Cooper <alcooperx@gmail.com> Signed-off-by:
-
Jingoo Han authored
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/mmc/host/atmel-mci.c:2509:12: warning: 'atmci_suspend' defined but not used [-Wunused-function] drivers/mmc/host/atmel-mci.c:2539:12: warning: 'atmci_resume' defined but not used [-Wunused-function] Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Add support for initialising DMA from the Device Tree. Signed-off-by:
-
Guennadi Liakhovetski authored
This removes the deprecated use of the .private member of struct dma_chan and switches the sdhi / tmio mmc driver to using the dmaengine_slave_config() channel configuration method. Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
So far only the SDHI implementation uses TMIO MMC with DMA. That way a DMA channel filter function, defined in the TMIO driver wasn't a problem. However, such a filter function is DMA controller specific. Since the SDHI glue is only running on systems with the SHDMA DMA controller, the filter function can safely be provided by it. Move it into SDHI. Signed-off-by:
-
Joonyoung Shim authored
If pending interrupt for IDMAC exists when initialize IDMAC, it will call interrupt handler unnecessarily. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Acked-by:
-
Fredrik Soderstedt authored
Use the saved values in card->ext_csd when selecting power class. By doing this the power class will be selected even if mmc_init_card is called with oldcard != NULL, which is the case after a suspend/resume. Today ext_csd is NULL if mmc_init_card is called with oldcard != NULL and power class will not be selected. According to the eMMC specification the POWER_CLASS value is reset after power failure, H/W reset assertion and any CMD0 reset. Signed-off-by:
Fredrik Soderstedt <fredrik.soderstedt@stericsson.com> Reviewed-by:
Johan Rudholm <jrudholm@gmail.com> Acked By: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by:
-
Ulf Hansson authored
The mmc_card_sleep|awake APIs are not being used since the support is already properly encapsulated within the suspend sequence. Sleep|awake command is also specific for eMMC. We remove the sleep|awake bus_ops, the mmc_card_sleep|awake APIs and move the code into the mmc specific core instead. This also includes the mmc ops function, mmc_sleepawake. All releated functions have then become static and we have got far less code to maintain. Additionally this patch also simplifies the code from mmc_sleepawake, since it is only used to put the card to sleep and not awake. Signed-off-by:
-
Ulf Hansson authored
Aggressive power management is suitable when saving power is essential. At request inactivity timeout, aka pm runtime autosuspend timeout, the card will be suspended. Once a new request arrives, the card will be re-initalized and thus the first request will suffer from a latency. This latency is card-specific, experiments has shown in general that SD-cards has quite poor initialization time, around 300ms-1100ms. eMMC is not surprisingly far better but still a couple of hundreds of ms has been observed. Except for the request latency, it is important to know that suspending the card will also prevent the card from executing internal house-keeping operations in idle mode. This could mean degradation in performance. To use this feature make sure the request inactivity timeout is chosen carefully. This has not been done as a part of this patch. Enable this feature by using host cap MMC_CAP_AGGRESSIVE_PM and by setting CONFIG_MMC_UNSAFE_RESUME. Signed-off-by:
-
Ulf Hansson authored
Once the mmc blkdevice is being probed, runtime pm will be enabled. By using runtime autosuspend, the power save operations can be done when request inactivity occurs for a certain time. Right now the selected timeout value is set to 3 s. Obviously this value will likely need to be configurable somehow since it needs to be trimmed depending on the power save algorithm. For SD-combo cards, we are still leaving the enablement of runtime PM to the SDIO init sequence since it depends on the capabilities of the SDIO func driver. Moreover, when the blk device is being suspended, we make sure the device will be runtime resumed. The reason for doing this is that we want the host suspend sequence to be unaware of any runtime power save operations done for the card in this phase. Thus it can just handle the suspend as the card is fully powered from a runtime perspective. Finally, this patch prepares to make it possible to move BKOPS handling into the runtime callbacks for the mmc bus_ops. Thus IDLE BKOPS can be accomplished. Signed-off-by:
-
Ulf Hansson authored
SDIO is the only protocol that uses runtime pm for the card device right now. To provide the option for sd and mmc to use runtime pm as well the bus_ops callback are extended with two new functions. One for runtime_suspend and one for runtime_resume. This patch will also implement the callbacks for SDIO to make sure existing functionality is maintained. It also prepares to move away from using the mmc_power_restore_host API, since it is not needed when using runtime PM. Signed-off-by:
-
Ulf Hansson authored
Move mmc suspend specific operations to be executed from the .suspend callback in the mmc bus_ops. This simplifies the mmc_suspend_host function which is supposed to handle nothing but common suspend tasks. Since eMMC can be considered non-removable there are no need to check for ongoing bkops at PM_SUSPEND_PREPARE notification so remove it. Signed-off-by:
-
Wei Yongjun authored
Fix to return -ENODEV in the request dma error case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Wei Yongjun authored
Fix to return -ENOMEM in alloc workqueue error case instead of 0, as done elsewhere in this function. Signed-off-by:
-
Maya Erez authored
The sanitize support is added as a user-app ioctl call, and was removed from the block-device request, since its purpose is to be invoked not via File-System but by a user. This feature deletes the unmap memory region of the eMMC card, by writing to a specific register in the EXT_CSD. unmap region is the memory region that was previously deleted (by erase, trim or discard operation). In order to avoid timeout when sanitizing large-scale cards, the timeout for sanitize operation is 240 seconds. Signed-off-by:
Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by:
Maya Erez <merez@codeaurora.org> Signed-off-by:
-
Ulf Hansson authored
Previously the MMC_CAP2_DETECT_ON_ERR was invented for detecting slow card removal. In was never a realy good solution and a proper fix has been merged using gpio debouncing instead. We remove this cap in this patch. Although when using polling card detect mode, the code invented for MMC_CAP2_DETECT_ON_ERR is re-used to complete card removal in an earlier phase. There are no need waiting for the polling timeout to elapse in this case. Signed-off-by:
Kevin Liu <kliu5@marvell.com> Signed-off-by:
-
Fredrik Soderstedt authored
Only execute tuning for sd and sdio devices that are using SDR50 or SDR104. Make sure clock is hold during tuning for sdio devices. Signed-off-by:
-
Santosh Shilimkar authored
MMC driver probe will abort for DT case because of failed platform_get_resource_byname() lookup. Fix it by skipping resource lookup byname for device tree build. Issue is hidden because hwmod populates the IO resources which helps to succeed platform_get_resource_byname() and probe. Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
Balaji T K <balajitk@ti.com> Signed-off-by:
-
Matt Porter authored
Convert dmaengine channel requests to use dma_request_slave_channel_compat(). This supports platforms booting with or without DT populated. Signed-off-by:
Matt Porter <mporter@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Acked-by:
-
