- 20 Jun, 2017 40 commits
-
-
Mantas M authored
commit c2ed1880 upstream. The protocol field is checked when deleting IPv4 routes, but ignored for IPv6, which causes problems with routing daemons accidentally deleting externally set routes (observed by multiple bird6 users). This can be verified using `ip -6 route del <prefix> proto something`. Signed-off-by:
Mantas Mikulėnas <grawity@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Willy Tarreau <w@1wt.eu>
-
Ben Hutchings authored
commit 2d6a0e9d upstream. Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
commit d4114914 upstream. Signed-off-by:
-
Omar Sandoval authored
commit c4baad50 upstream. put_chars() stuffs the buffer it gets into an sg, but that buffer may be on the stack. This breaks with CONFIG_VMAP_STACK=y (for me, it manifested as printks getting turned into NUL bytes). Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Amit Shah <amit.shah@redhat.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by:
-
Kees Cook authored
commit a4866aa8 upstream. Under CONFIG_STRICT_DEVMEM, reading System RAM through /dev/mem is disallowed. However, on x86, the first 1MB was always allowed for BIOS and similar things, regardless of it actually being System RAM. It was possible for heap to end up getting allocated in low 1MB RAM, and then read by things like x86info or dd, which would trip hardened usercopy: usercopy: kernel memory exposure attempt detected from ffff880000090000 (dma-kmalloc-256) (4096 bytes) This changes the x86 exception for the low 1MB by reading back zeros for System RAM areas instead of blindly allowing them. More work is needed to extend this to mmap, but currently mmap doesn't go through usercopy, so hardened usercopy won't Oops the kernel. Reported-by:
Tommi Rantala <tommi.t.rantala@nokia.com> Tested-by:
Kees Cook <keescook@chromium.org> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by:
-
Lee, Chun-Yi authored
commit f9ac89f5 upstream. The 98d610c3 patch was introduced since v4.11-rc1 that it causes that the accelerometer input device will not be created on workable machines because the HID string comparing logic is wrong. And, the patch doesn't prevent that the accelerometer input device be created on the machines that have no BST0001. That's because the acpi_get_devices() returns success even it didn't find any match device. This patch fixed the HID string comparing logic of BST0001 device. And, it also makes sure that the acpi_get_devices() returns acpi_handle for BST0001. Fixes: 98d610c3 ("acer-wmi: setup accelerometer when machine has appropriate notify event") Reference: https://bugzilla.kernel.org/show_bug.cgi?id=193761Reported-by:
Samuel Sieb <samuel-kbugs@sieb.net> Signed-off-by:
"Lee, Chun-Yi" <jlee@suse.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Chun-Yi Lee authored
commit 98d610c3 upstream. The accelerometer event relies on the ACERWMID_EVENT_GUID notify. So, this patch changes the codes to setup accelerometer input device when detected ACERWMID_EVENT_GUID. It avoids that the accel input device created on every Acer machines. In addition, patch adds a clearly parsing logic of accelerometer hid to acer_wmi_get_handle_cb callback function. It is positive matching the "SENR" name with "BST0001" device to avoid non-supported hardware. Reported-by:
Bjørn Mork <bjorn@mork.no> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by:
-
Max Bires authored
commit f2cfa58b upstream. Without a bool string present, using "# CONFIG_DEVPORT is not set" in defconfig files would not actually unset devport. This esnured that /dev/port was always on, but there are reasons a user may wish to disable it (smaller kernel, attack surface reduction) if it's not being used. Adding a message here in order to make this user visible. Signed-off-by:
Max Bires <jbires@google.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Juergen Gross authored
commit 9121b15b upstream. Connecting to the backend isn't working reliably in xen-fbfront: in case XenbusStateInitWait of the backend has been missed the backend transition to XenbusStateConnected will trigger the connected state only without doing the actions required when the backend has connected. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Nicholas Bellinger authored
commit 1c99de98 upstream. Once upon a time back in 2009, a work-around was added to support the GlobalSAN iSCSI initiator v3.3 for MacOSX, which during login did not propose nor respond to MaxBurstLength, FirstBurstLength, DefaultTime2Wait and DefaultTime2Retain keys. The work-around in iscsi_check_proposer_for_optional_reply() allowed the missing keys to be proposed, but did not require waiting for a response before moving to full feature phase operation. This allowed GlobalSAN v3.3 to work out-of-the box, and for many years we didn't run into login interopt issues with any other initiators.. Until recently, when Martin tried a QLogic 57840S iSCSI Offload HBA on Windows 2016 which completed login, but subsequently failed with: Got unknown iSCSI OpCode: 0x43 The issue was QLogic MSFT side did not propose DefaultTime2Wait + DefaultTime2Retain, so LIO proposes them itself, and immediately transitions to full feature phase because of the GlobalSAN hack. However, the QLogic MSFT side still attempts to respond to DefaultTime2Retain + DefaultTime2Wait, even though LIO has set ISCSI_FLAG_LOGIN_NEXT_STAGE3 + ISCSI_FLAG_LOGIN_TRANSIT in last login response. So while the QLogic MSFT side should have been proposing these two keys to start, it was doing the correct thing per RFC-3720 attempting to respond to proposed keys before transitioning to full feature phase. All that said, recent versions of GlobalSAN iSCSI (v5.3.0.541) does correctly propose the four keys during login, making the original work-around moot. So in order to allow QLogic MSFT to run unmodified as-is, go ahead and drop this long standing work-around. Reported-by:
Martin Svec <martin.svec@zoner.cz> Cc: Martin Svec <martin.svec@zoner.cz> Cc: Himanshu Madhani <Himanshu.Madhani@cavium.com> Cc: Arun Easi <arun.easi@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit efb2ea77 upstream. This patch fixes a iscsi-target specific TMR reference leak during session shutdown, that could occur when a TMR was quiesced before the hand-off back to iscsi-target code via transport_cmd_check_stop_to_fabric(). The reference leak happens because iscsit_free_cmd() was incorrectly skipping the final target_put_sess_cmd() for TMRs when transport_generic_free_cmd() returned zero because the se_cmd->cmd_kref did not reach zero, due to the missing se_cmd assignment in original code. The result was iscsi_cmd and it's associated se_cmd memory would be freed once se_sess->sess_cmd_map where released, but the associated se_tmr_req was leaked and remained part of se_device->dev_tmr_list. This bug would manfiest itself as kernel paging request OOPsen in core_tmr_lun_reset(), when a left-over se_tmr_req attempted to dereference it's se_cmd pointer that had already been released during normal session shutdown. To address this bug, go ahead and treat ISCSI_OP_SCSI_CMD and ISCSI_OP_SCSI_TMFUNC the same when there is an extra se_cmd->cmd_kref to drop in iscsit_free_cmd(), and use op_scsi to signal __iscsit_free_cmd() when the former needs to clear any further iscsi related I/O state. Reported-by:
Rob Millner <rlm@daterainc.com> Cc: Rob Millner <rlm@daterainc.com> Reported-by:
Chu Yuan Lin <cyl@datera.io> Cc: Chu Yuan Lin <cyl@datera.io> Tested-by:
-
Thomas Gleixner authored
commit 6fdc6dd9 upstream. The vsyscall32 sysctl can racy against a concurrent fork when it switches from disabled to enabled: arch_setup_additional_pages() if (vdso32_enabled) --> No mapping sysctl.vsysscall32() --> vdso32_enabled = true create_elf_tables() ARCH_DLINFO_IA32 if (vdso32_enabled) { --> Add VDSO entry with NULL pointer Make ARCH_DLINFO_IA32 check whether the VDSO mapping has been set up for the newly forked process or not. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Andy Lutomirski <luto@amacapital.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathias Krause <minipli@googlemail.com> Link: http://lkml.kernel.org/r/20170410151723.602367196@linutronix.deSigned-off-by:
-
Andrey Konovalov authored
commit 2b6867c2 upstream. Subtracting tp_sizeof_priv from tp_block_size and casting to int to check whether one is less then the other doesn't always work (both of them are unsigned ints). Compare them as is instead. Also cast tp_sizeof_priv to u64 before using BLK_PLUS_PRIV, as it can overflow inside BLK_PLUS_PRIV otherwise. Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Rafał Miłecki authored
commit bd5d2131 upstream. After parsing TRX we should skip to the first block placed behind it. Our code was working only with TRX with length not aligned to the blocksize. In other cases (length aligned) it was missing the block places right after TRX. This fixes calculation and simplifies the comment. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Chris Salls authored
commit cf01fb99 upstream. In the case that compat_get_bitmap fails we do not want to copy the bitmap to the user as it will contain uninitialized stack data and leak sensitive data. Signed-off-by:
Chris Salls <salls@cs.ucsb.edu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Paul Mackerras authored
commit 48fe9e94 upstream. In the past, there was only one load-with-reservation instruction, lwarx, and if a program attempted a lwarx on a misaligned address, it would take an alignment interrupt and the kernel handler would emulate it as though it was lwzx, which was not really correct, but benign since it is loading the right amount of data, and the lwarx should be paired with a stwcx. to the same address, which would also cause an alignment interrupt which would result in a SIGBUS being delivered to the process. We now have 5 different sizes of load-with-reservation instruction. Of those, lharx and ldarx cause an immediate SIGBUS by luck since their entries in aligninfo[] overlap instructions which were not fixed up, but lqarx overlaps with lhz and will be emulated as such. lbarx can never generate an alignment interrupt since it only operates on 1 byte. To straighten this out and fix the lqarx case, this adds code to detect the l[hwdq]arx instructions and return without fixing them up, resulting in a SIGBUS being delivered to the process. [js] include disassemble.h in 3.12 Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
James Hogan authored
commit 563ddc10 upstream. Currently we try to zero the destination for a failed read from userland in fixup code in the usercopy.c macros. The rest of the destination buffer is then zeroed from __copy_user_zeroing(), which is used for both copy_from_user() and __copy_from_user(). Unfortunately we fail to zero in the fixup code as D1Ar1 is set to 0 before the fixup code entry labels, and __copy_from_user() shouldn't even be zeroing the rest of the buffer. Move the zeroing out into copy_from_user() and rename __copy_user_zeroing() to raw_copy_from_user() since it no longer does any zeroing. This also conveniently matches the name needed for RAW_COPY_USER support in a later patch. Fixes: 373cd784 ("metag: Memory handling") Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Signed-off-by:
-
James Hogan authored
commit ef62a2d8 upstream. Metag's lib/usercopy.c has a bunch of copy_from_user macros for larger copies between 5 and 16 bytes which are completely unused. Before fixing zeroing lets drop these macros so there is less to fix. Signed-off-by:
-
Jan-Marek Glogowski authored
commit 806a28ef upstream. Currently the cifs module breaks the CIFS specs on reconnect as described in http://msdn.microsoft.com/en-us/library/cc246529.aspx: "TreeId (4 bytes): Uniquely identifies the tree connect for the command. This MUST be 0 for the SMB2 TREE_CONNECT Request." Signed-off-by:
Jan-Marek Glogowski <glogow@fbihome.de> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Tested-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Li Qiang authored
commit e7e11f99 upstream. In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the 'req->mip_levels' array. This array can be assigned any value from the user space. As both the 'num_sizes' and the array is uint32_t, it is easy to make 'num_sizes' overflow. The later 'mip_levels' is used as the loop count. This can lead an oob write. Add the check of 'req->mip_levels' to avoid this. Signed-off-by:
Li Qiang <liqiang6-s@360.cn> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 53e16798 upstream. The mesa winsys sometimes uses unimplemented parameter requests to check for features. Remove the error message to avoid bloating the kernel log. Signed-off-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Murray McAllister authored
commit 63774069 upstream. In vmw_get_cap_3d_ioctl(), a user can supply 0 for a size that is used in vzalloc(). This eventually calls dump_stack() (in warn_alloc()), which can leak useful addresses to dmesg. Add check to avoid a size of 0. Signed-off-by:
Murray McAllister <murray.mcallister@insomniasec.com> Reviewed-by:
-
Murray McAllister authored
commit 36274ab8 upstream. Before memory allocations vmw_surface_define_ioctl() checks the upper-bounds of a user-supplied size, but does not check if the supplied size is 0. Add check to avoid NULL pointer dereferences. Signed-off-by:
-
Brendan McGrath authored
commit a89af4ab upstream. Support for the Asus Touchpad was recently added. It turns out this device can fail initialisation (and become unusable) when the RESET command is sent too soon after the POWER ON command. Unfortunately the i2c-hid specification does not specify the need for a delay between these two commands. But it was discovered the Windows driver has a 1ms delay. As a result, this patch modifies the i2c-hid module to add a sleep inbetween the POWER ON and RESET commands which lasts between 1ms and 5ms. See https://github.com/vlasenko/hid-asus-dkms/issues/24 for further details. Signed-off-by:
Brendan McGrath <redmcg@redmandi.dyndns.org> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Ardinartsev Nikita authored
commit 877a021e upstream. With NOGET quirk Logitech F510 is now fully workable in dinput mode including rumble effects (according to fftest). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117091 [jkosina@suse.cz: fix patch format] Signed-off-by:
Ardinartsev Nikita <ardinar23@gmail.com> Acked-by:
-
Jason A. Donenfeld authored
commit de5540d0 upstream. Under extremely heavy uses of padata, crashes occur, and with list debugging turned on, this happens instead: [87487.298728] WARNING: CPU: 1 PID: 882 at lib/list_debug.c:33 __list_add+0xae/0x130 [87487.301868] list_add corruption. prev->next should be next (ffffb17abfc043d0), but was ffff8dba70872c80. (prev=ffff8dba70872b00). [87487.339011] [<ffffffff9a53d075>] dump_stack+0x68/0xa3 [87487.342198] [<ffffffff99e119a1>] ? console_unlock+0x281/0x6d0 [87487.345364] [<ffffffff99d6b91f>] __warn+0xff/0x140 [87487.348513] [<ffffffff99d6b9aa>] warn_slowpath_fmt+0x4a/0x50 [87487.351659] [<ffffffff9a58b5de>] __list_add+0xae/0x130 [87487.354772] [<ffffffff9add5094>] ? _raw_spin_lock+0x64/0x70 [87487.357915] [<ffffffff99eefd66>] padata_reorder+0x1e6/0x420 [87487.361084] [<ffffffff99ef0055>] padata_do_serial+0xa5/0x120 padata_reorder calls list_add_tail with the list to which its adding locked, which seems correct: spin_lock(&squeue->serial.lock); list_add_tail(&padata->list, &squeue->serial.list); spin_unlock(&squeue->serial.lock); This therefore leaves only place where such inconsistency could occur: if padata->list is added at the same time on two different threads. This pdata pointer comes from the function call to padata_get_next(pd), which has in it the following block: next_queue = per_cpu_ptr(pd->pqueue, cpu); padata = NULL; reorder = &next_queue->reorder; if (!list_empty(&reorder->list)) { padata = list_entry(reorder->list.next, struct padata_priv, list); spin_lock(&reorder->lock); list_del_init(&padata->list); atomic_dec(&pd->reorder_objects); spin_unlock(&reorder->lock); pd->processed++; goto out; } out: return padata; I strongly suspect that the problem here is that two threads can race on reorder list. Even though the deletion is locked, call to list_entry is not locked, which means it's feasible that two threads pick up the same padata object and subsequently call list_add_tail on them at the same time. The fix is thus be hoist that lock outside of that block. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Uwe Kleine-König authored
commit 3bd32722 upstream. On some QNAP NAS devices the rtc can wake the machine. Several people noticed that once the machine was woken this way it fails to shut down. That's because the driver fails to acknowledge the interrupt and so it keeps active and restarts the machine immediatly after shutdown. See https://bugs.debian.org/794266 for a bug report. Doing this correctly requires to interpret the INT2 flag of the first read of the STATUS1 register because this bit is cleared by read. Note this is not maximally robust though because a pending irq isn't detected when the STATUS1 register was already read (and so INT2 is not set) but the irq was not disabled. But that is a hardware imposed problem that cannot easily be fixed by software. Signed-off-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Uwe Kleine-König authored
commit 8e6583f1 upstream. There were two deviations from the reference manual: you have to wait half a second when POC is active and you might have to repeat initialization when POC or BLD are still set after the sequence. Note however that as POC and BLD are cleared by read the driver might not be able to detect that a reset is necessary. I don't have a good idea how to fix this. Additionally report the value read from STATUS1 to the caller. This prepares the next patch. Signed-off-by:
-
Uwe Kleine-König authored
commit ac4d4f65 upstream. The rtc core calls the .read_alarm with all fields initialized to 0. As the s35390a driver doesn't touch some fields the returned date is interpreted as a date in January 1900. So make sure all fields are set to -1; some of them are then overwritten with the right data depending on the hardware state. In mainline this is done by commit d68778b8 ("rtc: initialize output parameter for read alarm to "uninitialized"") in the core. This is considered to dangerous for stable as it might have side effects for other rtc drivers that might for example rely on alarm->time.tm_sec being initialized to 0. Signed-off-by:
-
Arnd Bergmann authored
commit fe8c470a upstream. gcc -O2 cannot always prove that the loop in acpi_power_get_inferred_state() is enterered at least once, so it assumes that cur_state might not get initialized: drivers/acpi/power.c: In function 'acpi_power_get_inferred_state': drivers/acpi/power.c:222:9: error: 'cur_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] This sets the variable to zero at the start of the loop, to ensure that there is well-defined behavior even for an empty list. This gets rid of the warning. The warning first showed up when the -Os flag got removed in a bug fix patch in linux-4.11-rc5. I would suggest merging this addon patch on top of that bug fix to avoid introducing a new warning in the stable kernels. Fixes: 61b79e16 (ACPI: Fix incompatibility with mcount-based function graph tracing) Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 61b79e16 upstream. Paul Menzel reported a warning: WARNING: CPU: 0 PID: 774 at /build/linux-ROBWaj/linux-4.9.13/kernel/trace/trace_functions_graph.c:233 ftrace_return_to_handler+0x1aa/0x1e0 Bad frame pointer: expected f6919d98, received f6919db0 from func acpi_pm_device_sleep_wake return to c43b6f9d The warning means that function graph tracing is broken for the acpi_pm_device_sleep_wake() function. That's because the ACPI Makefile unconditionally sets the '-Os' gcc flag to optimize for size. That's an issue because mcount-based function graph tracing is incompatible with '-Os' on x86, thanks to the following gcc bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42109 I have another patch pending which will ensure that mcount-based function graph tracing is never used with CONFIG_CC_OPTIMIZE_FOR_SIZE on x86. But this patch is needed in addition to that one because the ACPI Makefile overrides that config option for no apparent reason. It has had this flag since the beginning of git history, and there's no related comment, so I don't know why it's there. As far as I can tell, there's no reason for it to be there. The appropriate behavior is for it to honor CONFIG_CC_OPTIMIZE_FOR_{SIZE,PERFORMANCE} like the rest of the kernel. Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Ilya Dryomov authored
commit 633ee407 upstream. sock_alloc_inode() allocates socket+inode and socket_wq with GFP_KERNEL, which is not allowed on the writeback path: Workqueue: ceph-msgr con_work [libceph] ffff8810871cb018 0000000000000046 0000000000000000 ffff881085d40000 0000000000012b00 ffff881025cad428 ffff8810871cbfd8 0000000000012b00 ffff880102fc1000 ffff881085d40000 ffff8810871cb038 ffff8810871cb148 Call Trace: [<ffffffff816dd629>] schedule+0x29/0x70 [<ffffffff816e066d>] schedule_timeout+0x1bd/0x200 [<ffffffff81093ffc>] ? ttwu_do_wakeup+0x2c/0x120 [<ffffffff81094266>] ? ttwu_do_activate.constprop.135+0x66/0x70 [<ffffffff816deb5f>] wait_for_completion+0xbf/0x180 [<ffffffff81097cd0>] ? try_to_wake_up+0x390/0x390 [<ffffffff81086335>] flush_work+0x165/0x250 [<ffffffff81082940>] ? worker_detach_from_pool+0xd0/0xd0 [<ffffffffa03b65b1>] xlog_cil_force_lsn+0x81/0x200 [xfs] [<ffffffff816d6b42>] ? __slab_free+0xee/0x234 [<ffffffffa03b4b1d>] _xfs_log_force_lsn+0x4d/0x2c0 [xfs] [<ffffffff811adc1e>] ? lookup_page_cgroup_used+0xe/0x30 [<ffffffffa039a723>] ? xfs_reclaim_inode+0xa3/0x330 [xfs] [<ffffffffa03b4dcf>] xfs_log_force_lsn+0x3f/0xf0 [xfs] [<ffffffffa039a723>] ? xfs_reclaim_inode+0xa3/0x330 [xfs] [<ffffffffa03a62c6>] xfs_iunpin_wait+0xc6/0x1a0 [xfs] [<ffffffff810aa250>] ? wake_atomic_t_function+0x40/0x40 [<ffffffffa039a723>] xfs_reclaim_inode+0xa3/0x330 [xfs] [<ffffffffa039ac07>] xfs_reclaim_inodes_ag+0x257/0x3d0 [xfs] [<ffffffffa039bb13>] xfs_reclaim_inodes_nr+0x33/0x40 [xfs] [<ffffffffa03ab745>] xfs_fs_free_cached_objects+0x15/0x20 [xfs] [<ffffffff811c0c18>] super_cache_scan+0x178/0x180 [<ffffffff8115912e>] shrink_slab_node+0x14e/0x340 [<ffffffff811afc3b>] ? mem_cgroup_iter+0x16b/0x450 [<ffffffff8115af70>] shrink_slab+0x100/0x140 [<ffffffff8115e425>] do_try_to_free_pages+0x335/0x490 [<ffffffff8115e7f9>] try_to_free_pages+0xb9/0x1f0 [<ffffffff816d56e4>] ? __alloc_pages_direct_compact+0x69/0x1be [<ffffffff81150cba>] __alloc_pages_nodemask+0x69a/0xb40 [<ffffffff8119743e>] alloc_pages_current+0x9e/0x110 [<ffffffff811a0ac5>] new_slab+0x2c5/0x390 [<ffffffff816d71c4>] __slab_alloc+0x33b/0x459 [<ffffffff815b906d>] ? sock_alloc_inode+0x2d/0xd0 [<ffffffff8164bda1>] ? inet_sendmsg+0x71/0xc0 [<ffffffff815b906d>] ? sock_alloc_inode+0x2d/0xd0 [<ffffffff811a21f2>] kmem_cache_alloc+0x1a2/0x1b0 [<ffffffff815b906d>] sock_alloc_inode+0x2d/0xd0 [<ffffffff811d8566>] alloc_inode+0x26/0xa0 [<ffffffff811da04a>] new_inode_pseudo+0x1a/0x70 [<ffffffff815b933e>] sock_alloc+0x1e/0x80 [<ffffffff815ba855>] __sock_create+0x95/0x220 [<ffffffff815baa04>] sock_create_kern+0x24/0x30 [<ffffffffa04794d9>] con_work+0xef9/0x2050 [libceph] [<ffffffffa04aa9ec>] ? rbd_img_request_submit+0x4c/0x60 [rbd] [<ffffffff81084c19>] process_one_work+0x159/0x4f0 [<ffffffff8108561b>] worker_thread+0x11b/0x530 [<ffffffff81085500>] ? create_worker+0x1d0/0x1d0 [<ffffffff8108b6f9>] kthread+0xc9/0xe0 [<ffffffff8108b630>] ? flush_kthread_worker+0x90/0x90 [<ffffffff816e1b98>] ret_from_fork+0x58/0x90 [<ffffffff8108b630>] ? flush_kthread_worker+0x90/0x90 Use memalloc_noio_{save,restore}() to temporarily force GFP_NOIO here. Link: http://tracker.ceph.com/issues/19309Reported-by:
Sergey Jerusalimov <wintchester@gmail.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Dave Martin authored
commit 7195ee31 upstream. It's not clear what behaviour is sensible when doing partial write of NT_METAG_RPIPE, so just don't bother. This patch assumes that userspace will never rely on a partial SETREGSET in this case, since it's not clear what should happen anyway. Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Acked-by:
-
Dave Martin authored
commit 5fe81fe9 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill TXSTATUS, a well-defined default value is used, based on the task's current value. Suggested-by:
-
Dave Martin authored
commit a78ce80d upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Signed-off-by:
-
Dave Martin authored
commit d3805c54 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Signed-off-by:
-
Dave Martin authored
commit fb411b83 upstream. gpr_set won't work correctly and can never have been tested, and the correct behaviour is not clear due to the endianness-dependent task layout. So, just remove it. The core code will now return -EOPNOTSUPPORT when trying to set NT_PRSTATUS on this architecture until/unless a correct implementation is supplied. Signed-off-by:
-
Ladi Prosek authored
commit fc865322 upstream. When init_vqs runs, virtio_balloon.stats is either uninitialized or contains stale values. The host updates its state with garbage data because it has no way of knowing that this is just a marker buffer used for signaling. This patch updates the stats before pushing the initial buffer. Alternative fixes: * Push an empty buffer in init_vqs. Not easily done with the current virtio implementation and violates the spec "Driver MUST supply the same subset of statistics in all buffers submitted to the statsq". * Push a buffer with invalid tags in init_vqs. Violates the same spec clause, plus "invalid tag" is not really defined. Note: the spec says: When using the legacy interface, the device SHOULD ignore all values in the first buffer in the statsq supplied by the driver after device initialization. Note: Historically, drivers supplied an uninitialized buffer in the first buffer. Unfortunately QEMU does not seem to implement the recommendation even for the legacy interface. Signed-off-by:
Ladi Prosek <lprosek@redhat.com> Signed-off-by:
-
Jiri Slaby authored
commit 62071194 upstream. With this reproducer: struct sockaddr_alg alg = { .salg_family = 0x26, .salg_type = "hash", .salg_feat = 0xf, .salg_mask = 0x5, .salg_name = "digest_null", }; int sock, sock2; sock = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(sock, (struct sockaddr *)&alg, sizeof(alg)); sock2 = accept(sock, NULL, NULL); setsockopt(sock, SOL_ALG, ALG_SET_KEY, "\x9b\xca", 2); accept(sock2, NULL, NULL); ==== 8< ======== 8< ======== 8< ======== 8< ==== one can immediatelly see an UBSAN warning: UBSAN: Undefined behaviour in crypto/algif_hash.c:187:7 variable length array bound value 0 <= 0 CPU: 0 PID: 15949 Comm: syz-executor Tainted: G E 4.4.30-0-default #1 ... Call Trace: ... [<ffffffff81d598fd>] ? __ubsan_handle_vla_bound_not_positive+0x13d/0x188 [<ffffffff81d597c0>] ? __ubsan_handle_out_of_bounds+0x1bc/0x1bc [<ffffffffa0e2204d>] ? hash_accept+0x5bd/0x7d0 [algif_hash] [<ffffffffa0e2293f>] ? hash_accept_nokey+0x3f/0x51 [algif_hash] [<ffffffffa0e206b0>] ? hash_accept_parent_nokey+0x4a0/0x4a0 [algif_hash] [<ffffffff8235c42b>] ? SyS_accept+0x2b/0x40 It is a correct warning, as hash state is propagated to accept as zero, but creating a zero-length variable array is not allowed in C. Fix this as proposed by Herbert -- do "?: 1" on that site. No sizeof or similar happens in the code there, so we just allocate one byte even though we do not use the array. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Takashi Iwai authored
commit 8aac7f34 upstream. fbcon can deal with vc_hi_font_mask (the upper 256 chars) and adjust the vc attrs dynamically when vc_hi_font_mask is changed at fbcon_init(). When the vc_hi_font_mask is set, it remaps the attrs in the existing console buffer with one bit shift up (for 9 bits), while it remaps with one bit shift down (for 8 bits) when the value is cleared. It works fine as long as the font gets updated after fbcon was initialized. However, we hit a bizarre problem when the console is switched to another fb driver (typically from vesafb or efifb to drmfb). At switching to the new fb driver, we temporarily rebind the console to the dummy console, then rebind to the new driver. During the switching, we leave the modified attrs as is. Thus, the new fbcon takes over the old buffer as if it were to contain 8 bits chars (although the attrs are still shifted for 9 bits), and effectively this results in the yellow color texts instead of the original white color, as found in the bugzilla entry below. An easy fix for this is to re-adjust the attrs before leaving the fbcon at con_deinit callback. Since the code to adjust the attrs is already present in the current fbcon code, in this patch, we simply factor out the relevant code, and call it from fbcon_deinit(). Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000619Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
